debian-installer - en to tl translation catalogue (11 entries)

note: Type: text Description :sl4:
en: Install the Arcboot boot loader on a hard disk
tl: Mag-install ng Arcboot boot loader sa hard disk

note: Type: string Description :sl4:
en: Disk for boot loader installation:
tl: Disk para sa pagluklok ng boot loader:

note: Type: string Description :sl4:
en: Arcboot must be installed into the volume header of a disk with a SGI disklabel. Usually the volume header of /dev/sda is used. Please give the device name of the disk on which to put arcboot.
tl: Kailangang ma-install ang arcboot sa volume header ng disk na mayroong SGI disklabel. Kadalasang gamit ang volume header ng /dev/sda. Ibigay ang pangalan ng device ng disk kung saan ilalagay ang arcboot.

note: Type: note Description :sl4:
en: Arcboot configured to use a serial console
tl: Nakaayos ang arcboot na gamitin ang serial console

note: Type: note Description :sl4:
en: Arcboot is configured to use the serial port ${PORT} as the console. The serial port speed is set to ${SPEED}.
tl: Nakaayos ang arcboot na gumamit ng serial port ${PORT} bilang console. Ang bilis ng serial port ay nakatakdang ${SPEED}.

note: Type: boolean Description :sl4:
en: Arcboot installation failed.  Continue anyway?
tl: Bigo ang pagluklok ng arcboot.  Magpatuloy pa rin?

note: Type: boolean Description :sl4:
en: The arcboot package failed to install into /target/.  Installing Arcboot as a boot loader is a required step.  The install problem might however be unrelated to Arcboot, so continuing the installation may be possible.
tl: Hindi na-install ang arcboot pakete sa /target/.  Kinakailangan na ma-install ang Arcboot bilang boot loader.  Maaring walang kinalaman ang problema sa pagluklok sa Arcboot, kaya maaaring magpatuloy ng pagluklok.

note: Type: note Description :sl4: Translators, the 4th string of this description has been dropped from PO files. It contains firmware commands and should not be translated.
en: Setting PROM variables for Arcboot
tl: Tinatakda ang mga PROM variable para sa Arcboot

note: Type: note Description :sl4: Translators, the 4th string of this description has been dropped from PO files. It contains firmware commands and should not be translated.
en: If this is the first Linux installation on this machine, or if the hard drives have been repartitioned, some variables need to be set in the PROM before the system is able to boot normally.
tl: Kung ito ay ang unang Linux installation sa makinang ito, o kung ang mga hard drive ay binago ang pagka-partisyon, may mga variable na kailangan i-set sa PROM bago maka-boot ang sistema ng normal.

note: Type: note Description :sl4: Translators, the 4th string of this description has been dropped from PO files. It contains firmware commands and should not be translated. "Stop for Maintenance" should be left in English
en: At the end of this installation stage, the system will reboot.  After this, enter the command monitor from the "Stop for Maintenance" option, and enter the following commands:
tl: Matapos itong hakbang sa pagluklok na ito, magre-reboot ang sistema.  Matapos nito, pumasok sa command monitor mula sa "Hinto para sa pagtaguyod" na option, at ibigay ang mga sumusunod na mga command:

note: Type: note Description :sl4: Translators, the 4th string of this description has been dropped from PO files. It contains firmware commands and should not be translated.
en: You will only need to do this once.  Afterwards, enter the "boot" command or reboot the system to proceed to your newly installed system.
tl: Kinakailangan lang ninyong gawin ito ng isang beses.  Matapos nito, ipasok ang "boot" na utos o i-reboot ang sistema upang magpatuloy sa inyong bagong luklok na sistema.
