aptitude - en to zh_TW translation catalogue (860 entries)

note: TRANSLATORS: These strings describing config items should be the same width.
en: %BOption:%b
zh_TW: %B選項:%b

note: TRANSLATORS: These strings describing config items should be the same width.
en: %BDefault:%b
zh_TW: %B預設:%b

en: True
zh_TW: 真

en: False
zh_TW: 否

note: TRANSLATORS: These strings describing config items should be the same width.
en: %BValue:%b
zh_TW: %B值:%b

note: TRANSLATORS: These strings describing config items should be the same width.
en: %BChoice:%b
zh_TW: %B 種類:%b

en: Display some available commands at the top of the screen
zh_TW: 於螢幕頂端顯示所有可用命令

en: If this option is enabled, a brief summary of some of the most important aptitude commands will appear beneath the menu bar.
zh_TW: 加入該選項時，aptitude部份重要的指令會在選單下方出現簡易的說明。

en: Hide the menu bar when it is not being used
zh_TW: 隱藏未使用的選單

en: If this option is enabled, the menu bar will only appear when it has been activated by pressing the menu key.
zh_TW: 啟動該選項時，選單列只會在按下選單鍵時才出現。

en: Use a minibuffer-style prompt when possible
zh_TW: 如果可能的話使用迷你緩衝區類型的提示訊息

en: If this option is enabled, prompts will be displayed in a single line at the bottom of the screen.  If not, prompts will be displayed as pop-up dialog boxes.
zh_TW: 啟動該選項時，單行的命令列會出現在螢幕的下方。沒啟動時，則命令列會以跳出的對話框出現。

en: Show partial search results (incremental search)
zh_TW: 顯示部分搜尋結果(漸進搜尋)

en: If this option is enabled, aptitude will perform searches within the package list as you type them.  This is convenient, but may slow the program down, particularly on older computers.
zh_TW: 啟動該選項時，aptitude會以你輸入的套件名稱搜尋並產生一個列表。該功能雖然方便，但會降低程式的效能，尤其是舊的電腦上。

en: Closing the last view exits the program
zh_TW: 關閉最後一個畫面並退出程式

en: If this option is enabled, aptitude will stop running when all views (package lists, package details, etc) have been closed.  Otherwise, aptitude will continue running until you select 'Quit' from the Actions menu.
zh_TW: 啟動該選項時，當套件列表和詳細說明列等被關閉時，aptitude會停止運作。否則aptitude會持續運作直到您在選單上選擇了“Quit”。

en: Prompt for confirmation at exit
zh_TW: 退出時提示確認

en: If this option is enabled, aptitude will not terminate until you confirm that you really want to quit.
zh_TW: 啟動該選項時，aptitude並不會馬上關閉，直到您確認在離開的對話框中選擇“Yes”

en: Pause after downloading files
zh_TW: 下載檔案後暫停

en: This option controls whether aptitude will wait for confirmation after a download before it goes ahead and installs packages.
zh_TW: 該選項會使aptitude在下載完所有套件時，會等待您確認是否要接續安裝套件。

en: Never
zh_TW: 未不

en: Never wait for the user after downloading packages: always begin the installation immediately.
zh_TW: 下載完成後，即刻安裝所有的套件。

en: When an error occurs
zh_TW: 當錯誤發生時

en: Wait for confirmation if an error occurred during the download.  If there were no errors, begin installing packages immediately.
zh_TW: 下載過程出錯時，會等待使用者確認下一個動作。如無錯誤發生時，即該安裝所有套件。

en: Always
zh_TW: 總是

en: Always wait for the user to confirm the download before proceeding with the installation.
zh_TW: 安裝套件前，總是等待使用者確認下載的套件無誤。

en: Use a 'status-line' download indicator for all downloads
zh_TW: 在所有的下載作業中使用“狀態列”下載進度顯示器

en: If this option is enabled, aptitude will display the status of ongoing downloads at the bottom of the screen, rather than opening a new view.
zh_TW: 啟動該選項時，aptitude會在螢幕下方顯示下載進度，而非產生新視窗。

en: Display the information area by default
zh_TW: 預設顯示訊息欄

en: If this option is enabled, the information area (the pane at the bottom of the screen) in the package list will be visible when the program starts; otherwise, it will be initially hidden.
zh_TW: 加入該選項時，套件列表的訊息欄(在螢幕的最下方)在程式啟動時將會顯現；預設為隱藏。

en: If this option is enabled, tabs will appear at the top of the screen listing the currently opened views.
zh_TW: 加入該選項時，目前開啟的選項表會列在螢幕最上方。

en: Display tabs for the information area
zh_TW: 顯示選擇套件的細節資訊

en: If this option is enabled, tabs will appear at the top of the information area (the pane at the bottom of the screen) listing the different displays of information that can be viewed there.
zh_TW: 加入該選項時，選項表會出現在訊息欄的最上方(在螢幕的最下方)並列出不同顯示訊息以供觀看。

en: Advance to the next item after changing the state of a package
zh_TW: 改變一個套件的狀態後前進至下一項

en: If this option is enabled, then performing an action on a package (for instance, installing or removing it) will move the selection to the next package in the list.
zh_TW: 加入該選項時，在一個套件上執行某個動作(如安裝或移除)後將會跳到列表中的下一個套件。

en: Automatically show why packages are broken
zh_TW: 自動顯示毀斷套件的理由

en: If this option is enabled, then highlighting a package that has broken dependencies will automatically display the dependencies that are unfulfilled in the lower pane of the display.
zh_TW: 加入該選項時，則強調某個相依關係損毀的套件時會螢幕下方的視窗內自動顯示未被滿足的相依性。

en: The default grouping method for package views
zh_TW: 用於查看套件的預設分組方法

en: This option controls how aptitude organizes the package list.  See the aptitude user's manual for information on how to specify a grouping method.
zh_TW: 該選項控制 aptitude 如何組織套件列表。參閱 aptitude 使用者手冊中，指定分組的方法。

en: The default display-limit for package views
zh_TW: 用於查看套件的預設顯示限制

en: By default, the limit of each package view will be set to the value specified by this option.  See the aptitude user's manual for detailed information about searches.
zh_TW: 預設情況下，每個套件檢視畫面會被限制在指定的值。參閱 aptitude 使用者手冊中，關於搜尋的部份

en: The display format for package views
zh_TW: 查看套件的顯示格式

en: This option controls how aptitude formats lines of the package list.  See the aptitude user's manual for information on how to specify a display format.
zh_TW: 該選項控制 aptitude 如何格式化套件列表。參閱 aptitude 使用者手冊關於如何指定顯示格式。

en: The display format for the status line
zh_TW: 狀態行的顯示格式

en: This option controls how aptitude formats the status line (the line between the package list and the lower pane).  See the aptitude user's manual for information on how to specify a display format.
zh_TW: 該選項控制 aptitude 如何格式化狀態行(該行夾在套件列表和下方視窗)。參閱 aptitude 伬用者手冊關於如何指定顯示格式。

en: The display format for the header line
zh_TW: 標題行的顯示格式

en: This option controls how aptitude formats the header line (the line above the package list).  See the aptitude user's manual for information on how to specify a display format.
zh_TW: 該選項控制著 aptitude 如何格式化標頭行(該行在套件列表上方)。參閱 aptitude 使用者手冊中關於如何指定顯示格式。

en: Automatically upgrade installed packages
zh_TW: 自動更新已安裝套件

en: If this option is enabled, then on startup, aptitude will select all upgradable packages for upgrade.
zh_TW: 加入該選項時，在啟動時，aptitude 會選擇所有可更新的套件來更新。

en: Remove obsolete package files after downloading new package lists
zh_TW: 下載新的套件列表後刪除過期的套件檔案

en: URL to use to download changelogs
zh_TW: 用於下載變更日誌的 URL

en: Display a preview of what will be done before doing it
zh_TW: 在實際執行動作前顯示將執行動作的預覽

en: If this option is enabled, then when you ask aptitude to perform an install run, it will first display a summary of the actions it is going to perform.
zh_TW: 加入該選項時，當你要求 aptitude 執行安裝時，它會先顯示即將進行的動作大綱。

en: Forget which packages are "new" whenever the package lists are updated
zh_TW: 當套件列表更新後忽略哪些套件是“新”的

en: If this option is enabled, then aptitude will clear the list of new packages after you update the package lists (e.g., by pressing 'u').
zh_TW: 加入該選項時，在您更新套件列表後(按下'u')，aptitude 將會清除新加入的套件列表。

en: Forget which packages are "new" whenever packages are installed or removed
zh_TW: 安裝或者移除套件後忽略哪些套件是“新”的

en: If this option is enabled, then aptitude will clear the list of new packages after you perform an install run or install or remove packages from the command-line.
zh_TW: 加入該選項時，在您從命令列進行安裝或移除套件時，aptitude 將會清除新加入的套件列表。

en: Do not display a warning when the first change is made in read-only mode
zh_TW: 當第一個更動是在唯讀模式下進行時不顯示警告。

en: If this option is %Bnot%b enabled, aptitude will display a warning when you modify the state of a package if you do not have permissions to apply the change to the system.
zh_TW: 加入%B而非%b選項後，如果您沒有更動系統的權限，在修改套件狀態時，aptitude 將會顯示警告訊息。

en: Warn when attempting to perform a privileged action as a non-root user
zh_TW: 在非 root 用戶試圖執行特權命令時發出警告

en: If this option is enabled, aptitude will warn you when you attempt to perform an action which you do not have permission to do: for instance, installing packages as a non-root user.  You will be given the option to log in as root and perform the action with root privileges.
zh_TW: 加入該選項時，當您沒有適當的權限時，aptitude會提出警告。舉例來說，以非 root 的使用者安裝套件。您可以改用 root 登錄並以 root 權限操作。

en: File to log actions into
zh_TW: 記錄所執行動作的日誌檔案

en: When you install or remove packages, a summary of what aptitude does will be written to this file.  If the first character of the file name is a pipe character ('%B|%b'), the remainder of the name will be interpreted as a shell command that is to receive the log on standard input.
zh_TW: 當您安裝或移除套件時，aptitude 將運作的大綱會寫在該檔案。如果檔名第一個字元是管線字元('%B|%b')，剩餘的字串會被解譯成 shell 指令，也就是指由標準輸入取得記錄資訊。

en: Automatically resolve dependencies of a package when it is selected
zh_TW: 選擇套件時自動解決依賴關係

en: If this option is enabled, aptitude will use a simple heuristic to immediately resolve the dependencies of each package you flag for installation.  This is much faster than the built-in dependency resolver, but may produce suboptimal results or fail entirely in some scenarios.
zh_TW: 加入該選項時，aptitude 將會使用簡單的嘗試錯誤方法來立即解決欲安裝套件的相依問題。這方式比內建的相依解決器更快速，但可能在某些情況下發生錯誤。

en: Automatically fix broken packages before installing or removing
zh_TW: 安裝或者移除時自動修正毀斷的套件

en: If this option is enabled, and you perform an install run while some packages are broken, aptitude will automatically apply the current suggestion of the problem resolver.  Otherwise, aptitude will prompt you for a solution to the broken dependencies.
zh_TW: 加入該選項時，當您進行安裝且部份套件是損毀時，aptitude 將自動套用目前解決器的建議。否則 aptitude 會詢問您損毀的相依關係的解救方式。

en: Install recommended packages automatically
zh_TW: 自動安裝推薦的套件

en: If this option is enabled and "automatically resolve dependencies" is also enabled, aptitude will attempt to install the recommendations of newly installed packages in addition to their outright dependencies.  Suggestions will not be automatically installed.
    If this option is enabled and "Remove unused packages automatically" is enabled, packages that are recommended by an installed package will not be automatically removed.
zh_TW: 加入該選項以及“自動解決相依問題”選項時，aptitude 將會嘗試安裝推薦的新套件以及額外符合相依性的軟體。建議的套件並不會安裝。
    如果加入該選項以及“自動移除未用套件”自動安裝推薦的套件選項時，先前安裝的被推薦套件將不會自動移除。

en: Remove unused packages automatically
zh_TW: 自動移除未用套件

en: If this option is enabled, packages that are automatically installed and that no manually installed package depends on will be removed from the system.  Cancelling the removal will flag the package as manually installed.
    If this option is enabled and "Install recommended packages automatically" is enabled, automatically installed packages will not be removed if any installed package recommends them.
zh_TW: 加入該選項時，自動安裝的套件在沒有其餘套件相依時會一併地從系統移除。
    如果該選項成立且"自動安裝推薦的套件"也成立，當已安裝的套件推薦時，這些自動安裝的套件並不會被刪除。

en: Packages that should never be automatically removed
zh_TW: 不應被自動移除的套件

en: Packages matching this search pattern will always be treated as if an installed package depends on them: they will never be targeted for removal as unused packages.
zh_TW: 符合該配對規則的套件將被視為，當一個已安裝的套件相依於它們時，它們決不會被標記成移除或不需要的套件。

en: Allow dependency resolutions that break holds or forbids
zh_TW: 允許相依解決器破壞保留或禁止的套件

en: If this option is enabled, then whenever aptitude solves a dependency problem, it will consider modifying held packages, or installing forbidden package versions.  With this option disabled, these solutions will be rejected by default.
    NOTE: At present, this restriction only applies to situations in which aptitude's dependency resolver (the red bar at the bottom of the screen) is activated.  aptitude will still break holds when automatically installing the dependencies of a package that has just been selected for installation or upgrade, due to apt bug #470035.
zh_TW: 加入該選項時，不管 aptitude 何時解決相依問題，它可能考慮修改保留或是安裝禁用的套件版本。  取消該選項時，這些動作預設是不會執行的。
    注意：目前，該限制只套用在 aptitude 的相依解決器上(在螢幕下方的紅色光棒)。安裝或升級指定套件並自動安裝符合套件相依性的軟體時，aptitude 仍然會破壞被設為保留的套件，原因請看 apt 臭蟲編號 #470035

en: UI options
zh_TW: 使用者介面選項

en: Dependency handling
zh_TW: 處理相依關係

en: Miscellaneous
zh_TW: 雜項

en: %ls: Examine
zh_TW: %ls：驗證

en: %ls: Apply
zh_TW: %ls：套用

en: %ls: Next
zh_TW: %ls：下一個

en: %ls: Previous
zh_TW: %ls：上一個

en: Dependency resolution disabled.
zh_TW: 取消自動解決相依性

en: Unable to resolve dependencies.
zh_TW: 無法解決相依關係。

en: Fatal error in resolver
zh_TW: 反解發生錯誤

en: [%d(%d)/...] Resolving dependencies
zh_TW: [%d(%d)/...] 正在解決相依賴關係

en: Internal error: unexpected null solution.
zh_TW: 內部錯誤：意料之外的無效解決方案。

en: %d install | %d installs
zh_TW[0]: %d 個可安裝

en: %d removal | %d removals
zh_TW[0]: %d 個移除

en: %d keep | %d keeps
zh_TW[0]: %d 個保存

en: %d upgrade | %d upgrades
zh_TW[0]: %d 個可升級

en: %d downgrade | %d downgrades
zh_TW[0]: %d 個可下載

en: "%s" is a virtual package provided by:
zh_TW: "%s" 是一個虛擬套件，由以下套件所提供:

en: You must choose one to install.
zh_TW: 你必須至少選擇一個來安裝。

en: %s is already installed at the requested version (%s)
zh_TW: %s 已經安裝為被要求的版本 (%s)

en: Package %s is not installed, so it will not be removed
zh_TW: Package %s 未安裝, 因此它將不會移除

en: Package %s is not installed, cannot forbid an upgrade
zh_TW: Package %s 未安裝, 無法升級

en: Package %s is not upgradable, cannot forbid an upgrade
zh_TW: Package %s 將不會升級, 無法升級

en: Note: selecting the task "%s: %s" for installation
zh_TW: 附註: 選擇安裝作業 "%s: %s"

en: Couldn't find any package whose name or description matched "%s"
zh_TW: 無法找到任何套件的名稱或敘述含有 "%s"

en: Bad action character '%c'
zh_TW: 錯誤的動作指令鍵 '%c'

en: Get:
zh_TW: 下載:

en: Changelog of %s
zh_TW: %s 的變更日誌

en: Can't execute sensible-pager, is this a working Debian system?
zh_TW: 無法執行 sensible-pager, 這是正常的 Debian 系統嗎？

en: Couldn't find a changelog for %s
zh_TW: 無法找到 %s 的更改紀錄

en: E: The clean command takes no arguments
zh_TW: E: clean 指令不接受任何參數

en: Del %s* %spartial/*
zh_TW: 刪除 %s* %spartial/*

en: Del %s %s [%sB]
zh_TW: 刪除 %s %s [%sB]

en: E: The autoclean command takes no arguments
zh_TW: E: autoclean 指令不接受任何參數

en: Would free %sB of disk space
zh_TW: 將釋放 %sB 磁碟空間

en: Freed %sB of disk space
zh_TW: 已釋放 %sB 磁碟空間

en: Deleting downloaded files
zh_TW: 刪除下載的檔案

en: Invalid operation %s
zh_TW: 無效的操作“%s”

en: Unexpected pattern argument following "keep-all"
zh_TW: 在參數“keep-all”之後有意料之外的模式

en: Unable to safely resolve dependencies, try running with --full-resolver.
zh_TW: 無法解決相依關係。試著執行時加入--full-resolver參數

en: Abort.
zh_TW: 放棄。

en: extract-cache-entries: at least one argument is required (the directory
    to which to write files).
zh_TW: extract-cache-entries：至少需要一個參數(該目錄
    為寫入檔案用)。

en: No such package "%s"
zh_TW: 無此套件“%s”

en: No packages were selected by the given search pattern; nothing to do.
zh_TW: 依給定的搜尋規則找不到套件；無事可作。

en: Would forget what packages are new
zh_TW: 忽略哪些套件是“新”的

en: There are no Easter Eggs in this program.
zh_TW: 此軟體沒有復活節彩蛋程式。

en: There really are no Easter Eggs in this program.
zh_TW: 此軟體真的沒有復活節彩蛋程式。

en: Didn't I already tell you that there are no Easter Eggs in this program?
zh_TW: 我不是已經告訴你這個軟體真的沒有復活節彩蛋程式了嗎?

en: Stop it!
zh_TW: 停啦!

en: Okay, okay, if I give you an Easter Egg, will you go away?
zh_TW: 好啦，好啦，如果我給你復活節彩蛋，你是不是就閃人？

en: All right, you win.
zh_TW: 好啦，你贏了。

en: What is it?  It's an elephant being eaten by a snake, of course.
zh_TW: 這是什麼? 這當然是一隻大象被一隻蛇吞掉。

en: Config files
zh_TW: 設定檔

en: The following packages are BROKEN:
zh_TW: 以下的套件狀態為毀斷

en: The following packages are unused and will be REMOVED:
zh_TW: 以下未使用的套件將會移除:

en: The following packages have been automatically kept back:
zh_TW: 以下套件已經設為自動保持現狀:

en: The following NEW packages will be automatically installed:
zh_TW: 以下新套件將會自動安裝:

en: The following packages will be automatically REMOVED:
zh_TW: 以下套件將會自動移除:

en: The following packages will be DOWNGRADED:
zh_TW: 以下套件將會自動降級:

en: The following packages have been kept back:
zh_TW: 以下套件已經設為保持現狀:

en: The following packages will be REINSTALLED:
zh_TW: 以下套件將重新安裝:

en: The following NEW packages will be installed:
zh_TW: 以下新套件將會安裝:

en: The following packages will be REMOVED:
zh_TW: 以下新套件將會移除:

en: The following packages will be upgraded:
zh_TW: 以下套件將會升級:

en: The following partially installed packages will be configured:
zh_TW: 以下部份套件將會被設定：

en: The following ESSENTIAL packages will be REMOVED!
zh_TW: 以下基本套件將會移除！

en: The following ESSENTIAL packages will be BROKEN by this action:
zh_TW: 以下基本套件將會因此動作而毀斷！

en: WARNING: Performing this action will probably cause your system to break!
             Do NOT continue unless you know EXACTLY what you are doing!
zh_TW: 警告: 執行以下動作可能會造成您的系統毀壞！
                 不要持續進行，無非您很清楚自己在做什麼！

en: To continue, type the phrase "%s":
zh_TW: 要繼續，請輸入以下聲明  "%s":

en: WARNING: untrusted versions of the following packages will be installed!
    
    Untrusted packages could compromise your system's security.
    You should only proceed with the installation if you are certain that
    this is what you want to do.
zh_TW: [警告]：將會安裝以下版本未受信賴的套件！
    
    未受信賴的套件有可能會危害到您系統的安全。
    只有在您確定您真的要這麼做時，您才可以進行安裝作業。

en: *** WARNING ***   Ignoring these trust violations because
                      %s::CmdLine::Ignore-Trust-Violations is 'true'!
zh_TW: *** 警告 ***  忽略這些信任違背，因為
                     %s::CmdLine::Ignore-Trust-Violations 的值為“真”！

en: *** WARNING ***   Ignoring these trust violations because
                      APT::Get::AllowUnauthenticated is 'true'!
zh_TW: *** 警告 ***  忽略不信任警告，因為
                     APT::Get::AllowUnauthenticated的設定值為“true”！

en: Do you want to ignore this warning and proceed anyway?
zh_TW: 您是否要忽略這個警告，不管如何繼續進行？

en: To continue, enter "%s"; to abort, enter "%s":
zh_TW: 要繼續，請輸入 "%s"；若要放棄，請輸入 "%s"：

en: The following packages are RECOMMENDED but will NOT be installed:
zh_TW: 以下套件受到推薦但是將不會安裝:

en: The following packages are SUGGESTED but will NOT be installed:
zh_TW: 以下套件受到建議但是將不會安裝:

en: No packages will be installed, upgraded, or removed.
zh_TW: 沒有套件將會被安裝、升級或移除。

en: %lu packages upgraded, %lu newly installed,
zh_TW: %lu 個套件升級, %lu 個新安裝,

en: %lu reinstalled,
zh_TW: %lu 個重新安裝,

en: %lu downgraded,
zh_TW: %lu 個降級,

en: %lu to remove and %lu not upgraded.
zh_TW: %lu 個將移除且 %lu 個不會升級.

en: Need to get %sB/%sB of archives.
zh_TW: 需要下載 %sB/%sB 的歸檔檔案.

en: Need to get %sB of archives.
zh_TW: 需要下載 %sB 的歸檔檔案.

en: After unpacking %sB will be used.
zh_TW: 解裝後將用去 %sB.

en: After unpacking %sB will be freed.
zh_TW: 解裝後將釋出 %sB.

en: No packages to show -- enter the package names on the line after 'i'.
zh_TW: 無顯示套件 -- 請在 'i' 之後輸入套件名稱。

en: Press Return to continue.
zh_TW: 按 Return 繼續。

en: No packages found -- enter the package names on the line after 'c'.
zh_TW: 未找到套件 -- 請在 'c' 之後輸入套件名稱。

en: No packages found -- enter zero or more roots of the search followed by the package to justify.
zh_TW: 未發現套件 -- 請輸入0個或多個搜尋內容再接著輸入要搜尋的套件名稱。

en: continue with the installation
zh_TW: 繼續安裝

en: abort and quit
zh_TW: 放棄並退出

en: show information about one or more packages; the package names should follow the 'i'
zh_TW: 顯示一個或者多個套件的訊息；套件的名字將在字元“i”之後。

en: show the Debian changelogs of one or more packages; the package names should follow the 'c'
zh_TW: 顯示一個或者多個套件的變更記錄；套件的名字將在字元“c”之後。

en: toggle the display of dependency information
zh_TW: 切換是否顯示相依賴關系訊息

en: toggle the display of changes in package sizes
zh_TW: 切換是否顯示套件的大小

en: toggle the display of version numbers
zh_TW: 切換是否顯示版本號

en: try to find a reason for installing a single package, or explain why installing one package should lead to installing another package.
zh_TW: 嘗試解釋安裝套件的原因，或解釋安裝一個套件時會導致安裝另一個套件。

en: run the automatic dependency resolver to fix the broken dependencies.
zh_TW: 執行自動相依解決器來修正已損毀的相依性。

en: enter the full visual interface
zh_TW: 進入全屏視覺化介面

en: You may also specify modification to the actions which will be taken.  To do so, type an action character followed by one or more package names (or patterns).  The action will be applied to all the packages that you list.  The following actions are available:
zh_TW: 您也可以對將要實施的動作進行修改。方法是，輸入一個動作字元後輸入一個或者多個套件的名稱(或者模式)。該動作將被實施到您所選擇的全部套件。下列動作可供選擇：

en: '+' to install packages
zh_TW: 按'+'鍵來安裝套件

en: '+M' to install packages and immediately flag them as automatically installed
zh_TW: 按'+M'安裝套件並且立即將它們標記為已安裝狀態

en: '-' to remove packages
zh_TW: 按'-'移除套件

en: '_' to purge packages
zh_TW: 按'_'清除套件

en: '=' to place packages on hold
zh_TW: “=”將套件置於保持狀態

en: ':' to keep packages in their current state without placing them on hold
zh_TW: 按':'將維持套件當前狀態但是並不將其置於保持狀態

en: '&M' to mark packages as automatically installed
zh_TW: 按'&M'將套件標記為自動安裝

en: '&m' to mark packages as manually installed
zh_TW: 按'm'將套件標記為手動安裝

en: '&BD' to install the build-dependencies of a package.
zh_TW: '&BD' 安裝套件的編譯相依套件。

en: Commands:
zh_TW: 命令：

en: aptitude failed to find a solution to these dependencies.  You can solve them yourself by hand or type 'n' to quit.
zh_TW: aptitude 無法找到解決這些相依問題的方法。  你可手動解決這些問題或輸入'n'來離開。

en: Do you want to continue? [Y/n/?]
zh_TW: 您想繼續嗎? [Y/n/?]

en: Resolve these dependencies by hand? [N/+/-/_/:/?]
zh_TW: 要手動解決這些相依性嗎？ [N/+/-/_/:/?]

en: Invalid response.  Please enter a valid command or '?' for help.
zh_TW: 錯誤回應。請輸入一個正確的指令或 '?' 以取得協助。

en: Enter a package management command (such as '+ package' to install a package), 'R' to attempt automatic dependency resolution or 'N' to abort.
zh_TW: 輸入一個套件管理指令(如'+package'來安裝套件)，'R'是嘗試自動解決相依問題或'N'是放棄。

en: 
    Dependency information will be shown.
zh_TW: 
    相依性資訊將會顯示。

en: 
    Dependency information will not be shown.
zh_TW: 
    相依性資訊將不會顯示。

en: 
    Versions will be shown.
zh_TW: 
    版本將會顯示。

en: 
    Versions will not be shown.
zh_TW: 
    版本將不會顯示

en: 
    Size changes will be shown.
zh_TW: 
    變動大小將會顯示

en: 
    Size changes will not be shown.
zh_TW: 
    變動大小將不會顯示

en: Unable to open %s for writing
zh_TW: 無法打開 %s 以寫入

en: Error writing resolver state to %s
zh_TW: 將相依關係解決狀態寫入檔案 %s 時發生錯誤

en: Resolver state successfully written!
zh_TW: 成功寫入每依關係解決狀態！

en: accept the proposed changes
zh_TW: 接受所建議的變動

en: give up and quit the program
zh_TW: 放棄並退出此程式

en: move to the next solution
zh_TW: 到下一個解決方案

en: move to the previous solution
zh_TW: 到上一個解決方案

en: toggle between the contents of the solution and an explanation of the solution
zh_TW: 切換解決方法的內容和說明。

en: examine the solution in the visual user interface
zh_TW: 檢查用戶可視介面中的設定方案

en: abort automatic dependency resolution; resolve dependencies by hand instead
zh_TW: 放棄自動解決相依問題，改以手動解決。

en: adjust the state of the listed packages, where ACTION is one of:
zh_TW: 修改所列套件的狀態，這裡“動作”為下列項之一：

en: Adjustments will cause the current solution to be discarded and recalculated as necessary.
zh_TW: 修改將導致當前解決方案被放棄或者必須重新計算。

en: The version %s is available in the following archives:
zh_TW: 在下列檔案中版本 %s 已經可用了:

en: Select the version of %s that should be used:
zh_TW: 選擇要被使用的 %s 的版本號：

en: Invalid response.  Please enter an integer between 1 and %d.
zh_TW: 錯誤回應。請輸入一個介於1和%d的數字。

en: Expected at least one package/version pair following '%c'
zh_TW: 在“%c”後需要至少一個套件/版本對

en: Expected a version or "%s" after "%s"
zh_TW: 期許“%2$s”之後的一個預期版本或“%1$s”

en: %s has no version named "%s"
zh_TW: %s 沒有“%s”這樣一個版本

en: Allowing the removal of %s
zh_TW: 同意移除 %s

en: Allowing the installation of %s version %s (%s)
zh_TW: 同意安裝 %s 的 %s 版本(%s)

en: Rejecting the removal of %s
zh_TW: 放棄移除 %s

en: Rejecting the installation of %s version %s (%s)
zh_TW: 放棄安裝 %s 的 %s 版本(%s)

en: No longer requiring the removal of %s
zh_TW: 不再要求刪除 %s

en: No longer requiring the installation of %s version %s (%s)
zh_TW: 不再要求安裝 %s 的 %s 版本(%s)

en: Requiring the removal of %s
zh_TW: 要求移除 %s

en: Requiring the installation of %s version %s (%s)
zh_TW: 要求安裝 %s 的 %s 版本(%s)

en: open: %zd; closed: %zd; defer: %zd; conflict: %zd
zh_TW: 打開：%zd；關閉：%zd；延遲: %zd; 衝突：%zd

en: I want to resolve dependencies, but no dependency resolver was created.
zh_TW: 我想要自動解決相依功能，但沒有相依解決器被建立。

en: Resolving dependencies...
zh_TW: 相依賴關係分析中...

en: The following actions will resolve these dependencies:
zh_TW: 以下動作會解決這些相依問題:

en: Accept this solution? [Y/n/q/?]
zh_TW: 是否接受該解決方案？[Y/n/q/?]

en: Abandoning all efforts to resolve these dependencies.
zh_TW: 放棄解決這些相依關係的全部努力。

en: Abandoning automatic dependency resolution and reverting to manual resolution.
zh_TW: 放棄自動相依解決，返回手動解法。

en: The following commands are available:
zh_TW: 下列命令可選：

en: File to write resolver state to:
zh_TW: 將相依關係解決狀態寫入檔案：

en: Invalid response; please enter one of the following commands:
zh_TW: 錯誤回應。請輸入以下任一個指令：

en: No solution found within the allotted time.  Try harder? [Y/n]
zh_TW: 在分配的時間內未找到解決方案。加把勁再試試？[Y/n]

en: Invalid response; please enter 'y' or 'n'.
zh_TW: 錯誤回應。請輸入“y”或“n”。

en: Unable to resolve dependencies!  Giving up...
zh_TW: 未能解決相依關係！放棄...

en: *** No more solutions available ***
zh_TW: *** 沒有更多的解決方案了 ***

en: *** ERROR: search aborted by fatal exception.  You may continue
               searching, but some solutions will be unreachable.
zh_TW: *** 錯誤：搜尋遇到嚴重意外。您能繼續搜尋，但無法取得解決的方法。

en: iconv of %s failed.
zh_TW: 用 iconv 轉換 %s 失敗。

en: search: You must provide at least one search term
zh_TW: 搜尋: 您至少要提供一個搜尋字串

en: not installed
zh_TW: 尚未安裝

en: unpacked
zh_TW: 未解包的

en: partially configured
zh_TW: 部份已設定

en: partially installed
zh_TW: 部份安裝

en: not installed (configuration files remain)
zh_TW: 未安裝 (尚保留設定檔案)

en: awaiting trigger processing by other package(s)
zh_TW: 等待其它套件觸發處理

en: awaiting trigger processing
zh_TW: 等待觸發處理

en: installed
zh_TW: 已安裝

en: %s; will be purged because nothing depends on it
zh_TW: %s; 將清除，因為無軟體相依於上

en: %s; will be purged
zh_TW: %s; 將被清除

en: %s; will be removed because nothing depends on it
zh_TW: %s: 將會由於無軟體相依於上而自動移除:

en: %s; will be removed
zh_TW: %s; 將被移除。

en: %s%s; will be downgraded [%s -> %s]
zh_TW: %s%s; 將會降級 [%s -> %s]

en: %s%s; will be upgraded [%s -> %s]
zh_TW: %s%s; 將會升級 [%s -> %s]

en: not a real package
zh_TW: 不是一個真正的套件

en:  [held]
zh_TW:  [保留]

en: %s; version %s will be installed
zh_TW: %s; 版本 %s 將被安裝

en: %s; version %s will be installed automatically
zh_TW: %s; 版本 %s 將會自動安裝

en: Package:
zh_TW: 套件:

en: State
zh_TW: 狀態

en: Provided by
zh_TW: 提供於

en: Version:
zh_TW: 版本:

en: Essential:
zh_TW: 基礎的：

en: yes
zh_TW: 是

en: New
zh_TW: 新

en: Forbidden version
zh_TW: 禁用版本

en: Automatically installed
zh_TW: 已自動安裝

en: no
zh_TW: 否

en: Priority:
zh_TW: 優先級：

en: N/A
zh_TW: 無

en: Section:
zh_TW: 部分：

en: Maintainer:
zh_TW: 維護者：

en: Architecture:
zh_TW: 硬體架構:

en: Uncompressed Size:
zh_TW: 未壓縮大小：

en: Compressed Size:
zh_TW: 壓縮後大小：

en: Filename:
zh_TW: 檔名:

en: Archive
zh_TW: 歸檔

en: Depends
zh_TW: 依賴於

en: PreDepends
zh_TW: 預依賴於

en: Recommends
zh_TW: 推薦

en: Suggests
zh_TW: 建議

en: Conflicts
zh_TW: 衝突

en: Breaks
zh_TW: 損毀

en: Replaces
zh_TW: 替換

en: Obsoletes
zh_TW: 過期檔案

en: Provides
zh_TW: 提供

en: Description:
zh_TW: 描述:

en: Homepage:
zh_TW: 官網：

en: Unable to locate package %s
zh_TW: 無法定位套件 %s

en: Unable to parse pattern %s
zh_TW: 無法分析模式 %s

en: but it is not installable
zh_TW: 但這無法安裝

en:  or
zh_TW:  或

en: The following packages have unmet dependencies:
zh_TW: 以下套件含有相依性:

en: Would download/install/remove packages.
zh_TW: 將下載/安裝/移除套件。

en: Internal Error, Ordering didn't finish
zh_TW: 內部錯誤, 排序無法完成

en: Deleting obsolete downloaded files
zh_TW: 刪除過期的下載檔案

en: E: The update command takes no arguments
zh_TW: E: update 指令不接受任何參數

en: No candidate version found for %s
zh_TW: 未找到 %s 的候選版本

en: No current or candidate version found for %s
zh_TW: 未發現 %s 的已安裝或候選版本

en: Unable to find an archive "%s" for the package "%s"
zh_TW: 無法找到 "%s" 套件的歸檔 "%s"

en: Unable to find a version "%s" for the package "%s"
zh_TW: 無法找到版本為 "%s" 的 "%s" 套件

en: Internal error: invalid value %i passed to cmdline_find_ver!
zh_TW: 內部錯誤: 傳給 cmdline_find_ver 的數值 %i 錯誤!

en: You cannot specify both an archive and a version for a package
zh_TW: 你無法同時指定一個套件的歸檔類別與版本

en: Current status: %F.
zh_TW: 目前狀態： %F。

en: There is %d newly obsolete package. | There are %d newly obsolete packages.
zh_TW[0]: 有 %d 個新捨棄套件。

en: There is %d newly obsolete package:  | There are %d newly obsolete packages:
zh_TW[0]: 共有 %d 個新被癈棄不用的套件：

en: dep_level
zh_TW: 相依程度

en: version_selection
zh_TW: 版本選擇

en: Current
zh_TW: 目前

en: Candidate
zh_TW: 候選版本

en: Install
zh_TW: 安裝

en: InstallNotCurrent
zh_TW: 已安裝但不是最新版本

en: allow_choices
zh_TW: 允許的選項

en: true
zh_TW: 真

en: false
zh_TW: 否

en: Install(%s)
zh_TW: 安裝(%s)

en: Remove(%s)
zh_TW: 移除(%s)

en: Install(%s provides %s)
zh_TW: 安裝(%s 提供 %s)

en: Remove(%s provides %s)
zh_TW: 移除(%s提供%s)

en:     ++ Examining %F
zh_TW:     ++ 正在檢查 %F

en:     ++   --> skipping, not a conflict
zh_TW:     ++   --> 忽略，並非衝突

en:     ++   --> skipping conflict
zh_TW:     ++   --> 忽略衝突

en:     ++   --> skipping, not relevant according to params
zh_TW:     ++   --> 忽略與參數無關的動作

en:     ++   --> skipping, parent is not the selected version
zh_TW:     ++   --> 忽略，上一個不是選擇的版本

en:     ++   --> skipping, the dep is satisfied by the current version
zh_TW:     ++   --> 忽略，相依性符合目前的版本

en: Skipping this solution, I've already seen it.
zh_TW: 跳過該解法，我已考慮過了。

en:     ++   --> skipping, version check failed
zh_TW:     ++   --> 忽略，版本檢查失敗

en:     ++   --> ENQUEUING
zh_TW:     ++   --> 加入佇列

en:     ++   --> ENQUEUING %s Provides %s
zh_TW:     ++   --> 加入佇列 %s 提供 %s

en: Starting search with parameters %ls
zh_TW: 開始以%ls參數來搜尋

en: No package named "%s" exists.
zh_TW: 套件“%s”不存在。

en: Unable to parse some match patterns.
zh_TW: 無法解析匹配的模式。

en: Unexpected end-of-file on standard input
zh_TW: 標準輸入中遇到意料之外的檔案結束

en: UNSATISFIED
zh_TW: 未滿足的

en: UNAVAILABLE
zh_TW: 不可用

en: Tags
zh_TW: 標簽

en: User Tags
zh_TW: 使用者自訂標誌

en:  [Working]
zh_TW: [正在工作]

en: [Hit]
zh_TW: [命中]

en: [Downloaded]
zh_TW: [已下載]

en: Downloaded %sB in %s (%sB/s).
zh_TW: 已下載 %sB，耗時 %s (%sB/s)。

en: %n%nSome files were not downloaded successfully.
zh_TW: %n%n某些檔案無法下載。

en: Continue
zh_TW: 繼續

en: Cancel
zh_TW: 取消

en: Total Progress:
zh_TW: 總進度：

en:  [ %i%% ] (%sB/s, %s remaining)
zh_TW:  [ %i%% ]  (%sB/s, 剩下 %s)

en:  [ %i%% ] (stalled)
zh_TW:  [ %i%% ] (已停頓)

en: Downloading...
zh_TW: 正在下載...

en: Please insert the disc labeled "%s" into the drive "%s"
zh_TW: 請將標號為“%s”的磁碟插入驅動器“%s”

en: Abort
zh_TW: 放棄

en: [IGNORED]
zh_TW: [忽略]

en: [ERROR]
zh_TW: [錯誤]

note: TRANSLATORS: Set this string to the name of a configuration file in $pkgdatadir/aptitude that overrides defaults for your language.  This is particularly intended for overriding entries in the Aptitude::Sections::Descriptions tree. For instance, Sections localized for the language .ww might be store
en: Localized defaults|
zh_TW: aptitude-defaults.zh_TW

en: Could not lock the cache file; this usually means that dpkg or another apt tool is already installing packages.  Opening in read-only mode; any changes you make to the states of packages will NOT be preserved!
zh_TW: 無法鎖定快取檔案。這表示有其它dpkg或apt工具正在安裝套件。目前以唯讀方式打開；您對套件狀態所作的任何改變都不會被儲存！

note: TRANSLATORS: Imp = Important
en: Imp
zh_TW: 導入

note: TRANSLATORS: Req = Required
en: Req
zh_TW: 要求

note: TRANSLATORS: Std = Standard
en: Std
zh_TW: 標準

note: TRANSLATORS: Opt = Optional
en: Opt
zh_TW: 可選

note: TRANSLATORS: Xtr = Extra
en: Xtr
zh_TW: 額外

en: ERR
zh_TW: 錯誤

en: ERROR
zh_TW: 錯誤

en: main
zh_TW: 主要

en: Couldn't read list of sources
zh_TW: 無法讀取套件來源列表

en: Can't open Aptitude extended state file
zh_TW: 無法打開 Aptitude 延伸狀態檔案

en: Reading extended state information
zh_TW: 正在讀取延伸狀態檔案

en: Initializing package states
zh_TW: 初始化套件狀態

en: Cannot open Aptitude state file
zh_TW: 無法打開 Aptitude 延伸狀態檔案

en: Writing extended state information
zh_TW: 正在編輯延伸狀態訊息

en: Couldn't write state file
zh_TW: 不能寫入狀態檔案

en: failed to remove %s
zh_TW: 無法移除 %s

en: failed to rename %s to %s
zh_TW: 更名 %s 成 %s 失敗

en: couldn't replace %s with %s
zh_TW: 無法將%s替代成%s

en: Could not regain the system lock!  (Perhaps another apt or dpkg is running?)
zh_TW: 無法重新取得系統鎖定！(也許另一個 apt 或 dpkg 正在執行？)

en: Unable to correct dependencies, some packages cannot be installed
zh_TW: 無法修正依賴關係，一些包無法安裝

en: The list of sources could not be read.
zh_TW: 無法讀取軟體源列表。

en: The package lists or status file could not be parsed or opened.
zh_TW: 無法解析或打開套件列表檔案或狀態檔案。

en: You may want to update the package lists to correct these missing files
zh_TW: 您可能需要更新套件列表來解決缺少這些檔案的問題

en: The package cache is not available; unable to download and install packages.
zh_TW: 套件 cache 不可用；無法下載並安裝套件。

en: Couldn't read source list
zh_TW: 無法讀取源列表檔案

en: Internal error: couldn't generate list of packages to download
zh_TW: 內部錯誤：無法生成下載套件列表

en: Failed to fetch %s: %s
zh_TW: 下載 %s 失敗：%s

en: Unable to correct for unavailable packages
zh_TW: 無法修正不可取得的套件

en: Couldn't read list of package sources
zh_TW: 無法讀取套件源列表

en: Couldn't clean out list directories
zh_TW: 無法清空列表目錄

en: Couldn't rebuild package cache
zh_TW: 無法重建套件快取

en: Unable to stat %s.
zh_TW: 無法取得“%s”的訊息

en: Unable to open %s to log actions
zh_TW: 無法打開 %s 來記錄動作

en: Error generating local time (%s)
zh_TW: 產生本地時間(%s)時錯誤

en: log report
zh_TW: 紀錄回報

en: Will install %li packages, and remove %li packages.
zh_TW: 將要安裝 %li 個套件，移除 %li 個套件。

en: %sB of disk space will be used
zh_TW: 將要佔用 %sB 的磁碟空間

en: %sB of disk space will be freed
zh_TW: 將要釋放 %sB 的磁碟空間

en: INSTALL
zh_TW: 安裝

en: REMOVE
zh_TW: 移除

en: REINSTALL
zh_TW: 重新安裝

en: HOLD
zh_TW: 保持

en: BROKEN
zh_TW: 損壞

en: REMOVE, NOT USED
zh_TW: 移除, 未用

en: REMOVE, DEPENDENCIES
zh_TW: 移除, 依賴關係

en: INSTALL, DEPENDENCIES
zh_TW: 安裝, 依賴關係

en: HOLD, DEPENDENCIES
zh_TW: 保持, 依賴關係

en: UNCONFIGURED
zh_TW: 未設定的

en: Unknown action type: %s
zh_TW: 未知的操作類型：%s

en: Unterminated literal string after %s
zh_TW: 無法結束 %s 之後的未結束字串

en: Unknown priority %s
zh_TW: 未知的優先值 %s

en: Match pattern ends unexpectedly (expected '%c').
zh_TW: 配對規則意外終止(預期'%c')

en: Expected '%c', got '%c'.
zh_TW: 期許“%c”，卻得到“%c”

en: Unknown dependency type: %s
zh_TW: 未知依賴類型：%s

en: Unmatched '('
zh_TW: 不匹配“(”

en: Provides: cannot be broken
zh_TW: “提供”類型不可能損壞

en: Unknown pattern type: %c
zh_TW: 未知的模式類型：%c

en: Can't search for ""
zh_TW: 無法搜尋“”

en: Unexpected empty expression
zh_TW: 意外的空表達式

en: Unexpected ')'
zh_TW: 意外的“)”

en: I wasn't able to locate a file for the %s package. This might mean you need to manually fix this package. (due to missing arch)
zh_TW: 我無法找到套件 %s 的檔案。這可能代表你必須手動修復這個套件。 (應該是遺漏 arch)

en: The package index files are corrupted. No Filename: field for package %s.
zh_TW: 套件索引列表是損壞的。無套件 %s 的檔名: 欄位。

en: Building tag database
zh_TW: 建立標簽資料庫

en: Reading task descriptions
zh_TW: 閱讀作業敘述

en: Unable to stat "%s"
zh_TW: 無法獲得“%s”的訊息

en: Unable to remove "%s"
zh_TW: 無法移除“%s”

en: Unable to list files in "%s"
zh_TW: 無法列出“%s”中的檔案

en: Failure closing directory "%s"
zh_TW: 無法關閉目錄“%s”

en: Unable to remove directory "%s"
zh_TW: 無法刪除目錄“%s”

en: Perform all pending installs and removals
zh_TW: 執行所有等待執行的安裝和移除作業

en: Check for new versions of packages
zh_TW: 正在檢查新版本的套件

en: Mark all upgradable packages which are not held for upgrade
zh_TW: 為所有未被保持現狀的套件加上升級標記

en: Forget which packages are "new"
zh_TW: 忽略哪些套件是 '新' 的

en: Cancel all pending installations, removals, holds, and upgrades.
zh_TW: 執行所有等待執行的安裝、移除、保持和升級作業。

en: Delete package files which were previously downloaded
zh_TW: 刪除以前下載的套件檔案

en: Delete package files which can no longer be downloaded
zh_TW: 刪除無法再下載的套件檔案

en: Reload the package cache
zh_TW: 重新載入套件快取

en: Exit the program
zh_TW: 退出此程序

en: Undo the last package operation or group of operations
zh_TW: 復原最近一次或者一組操作

en: Packages
zh_TW: 套件

en: Preview
zh_TW: 預覽

en: Resolver
zh_TW: 解除器

en: Upgrade
zh_TW: 升級

en: Preferences
zh_TW: 選項

en: Description
zh_TW: 描述

en: Auto
zh_TW: 自動

en: Virtual
zh_TW: 虛擬

en: Installed
zh_TW: 已安裝

en: Reinstall
zh_TW: 重新安裝

en: Downgrade
zh_TW: 降級

en: Remove
zh_TW: 移除

en: A package-list update or install run is already taking place.
zh_TW: 已經開始了一個套件列表更新或者安裝的動作。

en: Downloading packages
zh_TW: 下載套件中

en: Keep
zh_TW: 保留

en: Hold
zh_TW: 保持

en: Unknown
zh_TW: 未知

en: Building view
zh_TW: 建立視望中

en: Packages with unsatisfied dependencies
     The dependency requirements of these packages will be unmet after the install is complete.
     .
     The presence of this tree probably indicates that something is broken, either on your system or in the Debian archive.
zh_TW: 依賴關係未被滿足的套件
     這些套件的依賴需求將會在安裝完成之後毀斷。
     .
     此分類樹的存在表示您的系統上或者 Debian 歸檔中的某些東西被破壞。

en: Packages being removed because they are no longer used
     These packages are being deleted because they were automatically installed to fulfill dependencies, and the planned action will result in no installed package declaring an 'important' dependency on them.
zh_TW: 因不再使用而刪除的套件
     這些套件被刪除，因為它們被自動安裝以滿足依賴關係，同時計劃中的操作將導致沒有任何套件宣稱與它們有 '重要' 依賴關係。

en: Packages being automatically held in their current state
     These packages could be upgraded, but they have been kept in their current state to avoid breaking dependencies.
zh_TW: 被自動保持在當前狀態的套件
     這些套件可以被升級，但是它們被保持在其當前狀態以避免破壞依賴關係。

en: Packages being automatically installed to satisfy dependencies
     These packages are being installed because they are required by another package you have chosen for installation.
zh_TW: 被自動安裝以滿足依賴關係的套件
     這些套件被安裝的原因是您選擇安裝的另一個套件要求它們。

en: Packages being deleted due to unsatisfied dependencies
     These packages are being deleted because one or more of their dependencies is no longer available, or because another package conflicts with them.
zh_TW: 由於未滿足依賴關係而移除的套件
     這些套件被移除，因為它們的一個或者多個依賴關係無法滿足，或者另一個套件和它們相沖突。

en: Packages to be downgraded
     An older version of these packages than is currently installed will be installed.
zh_TW: 將被降級的套件
     這些套件的一個比目前安裝版本老的版本將被安裝。

en: Packages being held back
     These packages could be upgraded, but you have asked for them to be held at their current version.
zh_TW: 被保持的套件
     這些套件可以升級，但是您已經要求將它們保持在現有版本。

en: Packages to be reinstalled
     These packages will be reinstalled.
zh_TW: 重新安裝的套件
     這些套件將被重新安裝。

en: Packages to be installed
     These packages have been manually selected for installation on your computer.
zh_TW: 將要安裝的套件
     這些套件已經被手動選擇安裝在您的機器上。

en: Packages to be removed
     These packages have been manually selected for removal.
zh_TW: 將被移除的套件
     這些套件已經被手動選擇移除。

en: Packages to be upgraded
     These packages will be upgraded to a newer version.
zh_TW: 將要升級的套件
     這些套件將被升級到一個新版本。

en: Packages that are partially installed
     These packages are not fully installed and configured; an attempt will be made to complete their installation.
zh_TW: 只安裝部份的套件
     這些套件未被完整安裝和設定；再一次地嘗試完成它們的安裝程序。

en: Not Installed
zh_TW: 尚未安裝

en: %s depends upon %s
zh_TW: %s 相依於 %s

en: %s pre-depends upon %s
zh_TW: %s 預先相依於 %s

en: %s suggests %s
zh_TW: %s 建議 %s

en: %s recommends %s
zh_TW: %s 推薦 %s

en: %s conflicts with %s
zh_TW: %s 衝突 %s

en: %s breaks %s
zh_TW: %s 破壞 %s 的相依性

en: %s replaces %s
zh_TW: %s 替代 %s

en: %s obsoletes %s
zh_TW: %s 過期 %s

en: Remove the following packages:
zh_TW: 移除下列套件：

en: Install the following packages:
zh_TW: 安裝下列套件：

en: Upgrade the following packages:
zh_TW: 升級下列套件：

en: Downgrade the following packages:
zh_TW: 降級下列套件：

en: Unrecognized color name "%s"
zh_TW: 無法識別的顏色名“%s”

en: Unrecognized attribute name "%s"
zh_TW: 無法識別的屬性名“%s”

en: Invalid entry in style definition group: "%s"
zh_TW: 風格定義中出現無效項目：“%s”

en: Invalid tagless entry in style definition group: "%s"
zh_TW: 風格定義中出現無效的未標記的項目：“%s”

en: The default color may only be used as a background.
zh_TW: 預設的顏色可以只被用做背景。

en: Unknown style attribute %s
zh_TW: 未知的風格屬性 %s

en: Invalid entry in keybinding group: "%s"
zh_TW: 快捷鍵綁定中的無效條目：“%s”

en: Ignoring invalid keybinding "%s" -> "%s"
zh_TW: 忽略無效快捷鍵綁定“%s”->“%s”

en: Expected policy identifier, got '%c'
zh_TW: 需要策略標識，卻得到“%c”

en: Expected ',' or '(', got '%c'
zh_TW: 需要“,”或“(”，卻得到“%c”

en: Unknown grouping policy "%s"
zh_TW: 未知的分組策略“%s”

en: Terminal policy '%s' should be the last policy in the list
zh_TW: 終極策略“%s”應該是列表中的最後一個策略

en: Bad section name '%s' (use 'none', 'topdir', 'subdir', or 'subdirs')
zh_TW: 壞的分類名稱“%s”(使用“none”，“topdir”，或者“subdir”)

en: Bad passthrough setting '%s' (use 'passthrough' or 'nopassthrough')
zh_TW: 壞的 passthrough 設置“%s”(使用“passthrough”或者“nopassthrough”)

en: Unable to parse pattern at '%s'
zh_TW: 無法在“%s”中分析模式

en: Unable to parse pattern after "%s"
zh_TW: 無法在“%s”後分析模式

en: Couldn't parse layout: No column format specified for static item
zh_TW: 無法分析配置: 未指定特定項目的欄位格式

en: Couldn't parse layout: encoding error in column descriptor
zh_TW: 無法分析佈局：列標識符編碼錯誤

en: Couldn't parse layout: unknown view item type "%s"
zh_TW: 無法分析配置: 未知的瀏覽項目類型 "%s"

en: Couldn't parse layout: no row number specified
zh_TW: 無法分析配置: 未指定行數

en: Couldn't parse layout: no width specified
zh_TW: 無法分析配置: 未指定寬度

en: Couldn't parse layout: no height specified
zh_TW: 無法分析配置: 未指定高度

en: Unknown alignment type '%s'
zh_TW: 未知的排列類型 '%s'

en: Invalid zero-length sorting policy name
zh_TW: 無效零長度排序策略名

en: Unmatched '(' in sorting policy description
zh_TW: 排序策略描述中不匹配的“(”

en: Invalid sorting policy type '%s'
zh_TW: 無效的排序策略類型“%s”

en: Can't decode multibyte string after "%ls"
zh_TW: 無法對“%ls”之後的多字元字串進行解碼

en: Can't decode wide-character string after "%s"
zh_TW: 無法對“%s”之後的寬字串進行解碼

en: Compiler: g++ %s
zh_TW: 編譯器：g++ %s

en: Compiled against:
zh_TW: 編譯使用：

en:   apt version %d.%d.%d
zh_TW:   apt 版本 %d.%d.%d

en:   NCurses version: Unknown
zh_TW: NCurses 版本：未知

en:   NCurses version %s
zh_TW: NCurses 版本：%s

en:   libsigc++ version: %s
zh_TW:  libsigc++ 版本：%s

en: 
    Current library versions:
zh_TW: 
    目前library版本：

en:   NCurses version: %s
zh_TW: NCurses 版本：%s

en:   cwidget version: %s
zh_TW: cwidget版本：%s

en:   Apt version: %s
zh_TW: Apt版本：%s

en: Usage: aptitude [-S fname] [-u|-i]
zh_TW: 用法： aptitude [-s 檔案名] [-u|-i]

en:        aptitude [options] <action> ...
zh_TW:        aptitude [選項] <動作> ...

en: Expected a number after -q=
zh_TW: 在 -q= 之後需要一個數字

en: Expected a number after -q=, got %s
zh_TW: 在 -q= 之後需要一個數字，但卻得到 %s

en: -o requires an argument of the form key=value, got %s
zh_TW: -o 需要如key=value格式的參數，卻得到%s

en: No comma following tag name "%s".
zh_TW: 標誌“%s”後沒有逗點。

en: WEIRDNESS: unknown option code received
zh_TW: 詭異：收到未知的選項代碼

en: Unknown command "%s"
zh_TW: 未知的命令“%s”

en: Uncaught exception: %s
zh_TW: 未知的例外：%s

en: Backtrace:
    %s
zh_TW: 回溯：
    %s

en: Search for:
zh_TW: 搜尋：

en: Search backwards for:
zh_TW: 向前搜尋：

en: Minesweeper
zh_TW: 掃雷

en: second
zh_TW: 秒

en: seconds
zh_TW: 分

en: Won
zh_TW: 贏

en: Lost
zh_TW: 輸

en: Could not open file "%s"
zh_TW: 無法打開檔案“%s”

en: Could not load game from %s
zh_TW: 無法從 %s 中載入遊戲

en: The board height must be a positive integer
zh_TW: 棋盤高度必須是正整數

en: The board width must be a positive integer
zh_TW: 棋盤寬度必須是正整數

en: Invalid mine count; please enter a positive integer
zh_TW: 不合法的地雷數；請輸入一個正整數

en: Setup custom game
zh_TW: 設置自定義遊戲

en: Height of board:
zh_TW: 棋盤高度：

en: Width of board:
zh_TW: 棋盤寬度：

en: Number of mines:
zh_TW: 地雷數量：

en: Ok
zh_TW: 確定

en: Choose difficulty level
zh_TW: 選擇難度級別

en: Easy
zh_TW: 容易

en: Medium
zh_TW: 中等

en: Hard
zh_TW: 困難

en: Custom
zh_TW: 自定義

en: You have won.
zh_TW: 您贏了。

en: You lose!
zh_TW: 您輸了！

en: Enter the filename to load:
zh_TW: 請輸入要載入的檔案名：

en: Enter the filename to save:
zh_TW: 輸入要保存的檔案名：

en: Encoding of mine-help.txt|UTF-8
zh_TW: mine-help.txt 的編碼|UTF-8

en: Package
zh_TW: 套件

en: InstSz
zh_TW: 安裝空間大小

en: DebSz
zh_TW: Deb包大小

en: Action
zh_TW: 動作

en: InstVer
zh_TW: 安裝版本

en: CandVer
zh_TW: 候選版本

en: LongState
zh_TW: 長格式狀態

en: LongAction
zh_TW: 長格式動作

en: Maintainer
zh_TW: 維護者

en: Priority
zh_TW: 優先級

en: Section
zh_TW: 部分

en: ProgName
zh_TW: 程式名

en: ProgVer
zh_TW: 程式版本

en: #Broken
zh_TW: #損壞

en: DiskUsage
zh_TW: 佔用磁碟空間

en: DownloadSize
zh_TW: 下載檔案大小

en: <N/A>
zh_TW: <不可用>

en: <none>
zh_TW: <無>

en: virtual
zh_TW: 虛擬

en: purged
zh_TW: 清除

en: half-config
zh_TW: 配置完成一半

en: half-install
zh_TW: 安裝完成一半

en: config-files
zh_TW: 配置檔案

en: triggers-awaited
zh_TW: 等待觸發

en: triggers-pending
zh_TW: 即將觸發

en: hold
zh_TW: 保持

en: forbidden upgrade
zh_TW: 被禁止的升級

en: purge
zh_TW: 清除

en: delete
zh_TW: 刪除

en: broken
zh_TW: 毀斷

en: install
zh_TW: 安裝

en: reinstall
zh_TW: 重新安裝

en: upgrade
zh_TW: 升級

en: none
zh_TW: 無

en: #Broken: %ld
zh_TW: #損壞：%ld

note: TRANSLATORS: Hostname
en: HN too long
zh_TW: HN 太長

en: Unable to transcode package display format after "%ls"
zh_TW: 在“%ls”之後無法解析套件顯示格式

en: Internal error: Default column string is unparsable
zh_TW: 內部錯誤：預設欄字符串無法解析

en: Tasks
zh_TW: 作業

en: Upgradable Packages
     A newer version of these packages is available.
zh_TW: 可升級套件
     這些套件有更新版可安裝。

en: New Packages
     These packages have been added to Debian since the last time you cleared the list of "new" packages (choose "Forget new packages" from the Actions menu to empty this list).
zh_TW: 新套件
     這些套件在您上次清空“新”套件列表之後添加到 Debian 中。(從動作選單中選擇“忘記新套件”項以清空此列表)

en: Installed Packages
     These packages are currently installed on your computer.
zh_TW: 已安裝套件
     這些套件目前安裝在您的機器上。

en: Not Installed Packages
     These packages are not installed on your computer.
zh_TW: 未安裝套件
     這些套件沒有安裝在您的機器上。

en: Obsolete and Locally Created Packages
     These packages are currently installed on your computer, but they are not available from any apt source.  They may be obsolete and removed from the archive, or you may have built a private version of them yourself.
zh_TW: 過期的和自行建立的套件
     這些套件目前安裝在您的機器上，但是它們不能從任何 apt 來源獲得。它們可能已經過時並在歸檔中被刪除，或者您自己建立了私人版本。

en: Virtual Packages
     These packages do not exist; they are names other packages use to require or provide some functionality.
zh_TW: 虛擬套件
     這些套件不存在；它們是一些其它套件要求或者提供某種功能的名稱。

en: Packages which are recommended by other packages
     These packages are not strictly required, but they may be necessary to provide full functionality in some other programs that you are installing or upgrading.
zh_TW: 套件由其他套件所建議
     這些並非使您的系統運作妥當的必要套件，但它們為其他您正安裝的套件提供輔助 的功能。

en: Packages which are suggested by other packages
     These packages are not required in order to make your system function properly, but they may provide enhanced functionality for some programs that you are currently installing.
zh_TW: 套件由其他套件所建議
     這些並非使你的系統運作妥當的必要套件，但它們為其他你正安裝的套件提供加強 的功能。

en: unknown
zh_TW: 未知

en: Priority %s
zh_TW: 優先級：%s

en: End-user
zh_TW: 使用者

en: Servers
zh_TW: 伺服器

en: Development
zh_TW: 軟體開發

en: Localization
zh_TW: 本地化

en: Hardware Support
zh_TW: 硬體支援

en: Unrecognized tasks
zh_TW: 其他作業

en: 
     Tasks are groups of packages which provide an easy way to select a predefined set of packages for a particular purpose.
zh_TW: 
     作業是一組套件，它們提供了一種簡單的方法來安裝特定作業導向的軟體

en: Bad number in format string: %ls
zh_TW: 格式字串裡有錯誤的號碼：%ls

en: Match indices must be 1 or greater, not "%s"
zh_TW: 匹配索引必須大於等於 1，而不是“%s”

en: Match index %ls is too large; available groups are (%s)
zh_TW: 匹配索引 %ls 太大了；可用的組為 (%s)

en: TAGLESS PACKAGES
zh_TW: 沒有標簽的套件

en: 
     These packages have not yet been classified in debtags, or the debtags database is not present (installing debtags may correct this problem).
zh_TW: 
    這些套件尚未被 debtags 驗證，或是不存在 debtags 資料庫(安裝 debtags 可修正這個問題)。

en: Source Package:
zh_TW: 源碼套件：

en: Package names provided by %s
zh_TW: 由 %s 所提供的套件名稱

en: Packages which depend on %s
zh_TW: 依賴於 %s 的套件

en: Versions of %s
zh_TW: %s 的版本號碼

en: %s is an essential package!%n%nAre you sure you want to remove it?%nType '%s' if you are.
zh_TW: %s 是一個核心套件！%n%n 您確定您要移除它嗎？%n 如果您確定的話輸入“%s”。

en: This group contains %d package. | This group contains %d packages.
zh_TW[0]: 該群組包含 %d 個套件。

en: All Packages
zh_TW: 全部包

en: No packages matched the pattern "%ls".
zh_TW: 沒有套件吻合樣式 "%ls"。

en: Enter the new package tree limit:
zh_TW: 輸入新的套件樹狀限制：

en: Enter the new package grouping mechanism for this display:
zh_TW: 為此顯示輸入新的套件分組機制：

en: Enter the new package sorting mechanism for this display:
zh_TW: 為此顯示輸入新的套件排序機制：

en: Couldn't cw::util::transcode column definition
zh_TW: 無法 cw::util::transcode 列定義

en: Couldn't parse column definition
zh_TW: 無法解析列定義

en: If you select a package, an explanation of why it should be installed or removed will appear in this space.
zh_TW: 如果你選擇了一個套件，它被安裝或移除的原因將會顯示在此空白處。

en: make_package_view: error in arguments -- two main widgets??
zh_TW: make_package_view: 參數錯誤 -- 兩個主要部件？

en: make_package_view: error in arguments -- bad column list for static item
zh_TW: make_package_view: 參數錯誤 -- 靜態項目的欄列表錯誤

en: Related Dependencies
zh_TW: 相關的相依性

en: Why Installed
zh_TW: 為何安裝的

en: make_package_view: bad argument!
zh_TW: make_package_view: 參數錯誤！

en: make_package_view: no main widget found
zh_TW: make_package_view: 未發現主要部件

en: depends on
zh_TW: 相依在

en: pre-depends on
zh_TW: 預先相依在

en: suggests
zh_TW: 建議

en: recommends
zh_TW: 推薦

en: conflicts with
zh_TW: 衝突

en: breaks
zh_TW: 損毀

en: replaces
zh_TW: 取代

en: obsoletes
zh_TW: 荒廢

en:  (provided by %F)
zh_TW:  (由 %F 提供)

en: If you select a package, an explanation of its current state will appear in this space.
zh_TW: 如果你選擇了一個套件，它的敘述將會顯示在此空白處。

en: upgraded
zh_TW: 已升級

en: downgraded
zh_TW: 已下載

en: The following packages depend on the currently installed version of %B%s%b (%B%s%b), or conflict with the version it will be %s to (%B%s%b), and will be broken if it is %s.
zh_TW: 以下套件相依於現有安裝版本 %B%s%b (%b%s%b)，或與版本 %s (%B%s%b) 衝突，且 若為 %s 將造成毀斷。

en: The following packages conflict with version %B%s%b of %B%s%b, and will be broken if it is %s.
zh_TW: 以下套件與版本 %B%s%b 的 %B%s%b 衝突，使用 %s 將會造成毀斷。

en: The following packages depend on version %B%s%b of %B%s%b, and will be broken if it is %s.
zh_TW: 以下套件相依於版本 %B%s%b 的 %B%s%b，使用 %s 將會造成毀斷。

en: The package cache is not available.
zh_TW: 套件 cache 不可用。

en: No packages are broken.
zh_TW: 沒有損毀的套件。

en: No resolution found.
zh_TW: 未發現任何解決方案。

en: Previous
zh_TW: 上一個

en: Next
zh_TW: 下一個

en: Apply
zh_TW: 套用

en: Close
zh_TW: 關閉

en: %s conflicts with %s [provided by %s %s]
zh_TW: %s 和 %s 衝突 [由 %s %s 提供]

en: Removing %s
zh_TW: %s 移除中

en: Installing %s %s (%s)
zh_TW: 正在安裝 %s %s (%s)

en: %BRemove%b the following packages:%n
zh_TW: %B移除%b 下列套件：%n

en: %BInstall%b the following packages:%n
zh_TW: %B安裝%b 下列套件：%n

en: %BKeep%b the following packages at their current version:%n
zh_TW: %B保持%b 下列套件於其當前版本：%n

en: %BUpgrade%b the following packages:%n
zh_TW: %B升級%b 下列套件：%n

en: %BDowngrade%b the following packages:%n
zh_TW: %B降級%b 下列套件：%n

en: Remove %F [%s (%s)]
zh_TW: 刪除 %F [%s (%s)]

en: Install %F [%s (%s)]
zh_TW: 安裝 %F [%s (%s)]

en: Cancel the installation of %F
zh_TW: 取消 %F 的安裝

en: Cancel the removal of %F
zh_TW: 取消移除 %F

en: Keep %F at version %s (%s)
zh_TW: 保持 %F 在版本 %s (%s)

en: Upgrade %F [%s (%s) -> %s (%s)]
zh_TW: 升級 %F [%s (%s) -> %s (%s)]

en: Downgrade %F [%s (%s) -> %s (%s)]
zh_TW: 降級 %F [%s (%s) -> %s (%s)]

en: -> Leave the dependency "%s recommends %s" unresolved.
zh_TW: -> 不處理“%s 推薦 %s”中的相依關係。

en: The following actions will resolve this dependency:
zh_TW: 下列動作將解決這一相依賴關係：

en: Keep the following packages at their current version:
zh_TW: 保持下列套件於其當前版本：

en: Leave the following recommendations unresolved:
zh_TW:  不解決下列推薦的套件：

en: No broken packages.
zh_TW: 無損毀的套件。

en: open: %d; closed: %d; defer: %d; conflict: %d
zh_TW: 打開：%d；關閉；%d；defer: %d; 衝突；%d

en: WARNING
zh_TW: [警告]

en: %F: This version of %s is from an %Buntrusted source%b!  Installing this package could allow a malicious individual to damage or take control of your system.
zh_TW: %F: 這個版本的 %s 來自於%B未受信任的來源%b！ 安裝了這個套件可能會讓您的系統被懷有惡意的人破壞或加以控制。

note: TRANSLATORS: This string is a confirmation message, which users (especially CJK users) should be able to input without input methods.  Please include nothing but ASCII characters.
en: Yes, I am aware this is a very bad idea
zh_TW: 是的，我知道這是一個非常糟糕的主意

en: Er, there aren't any errors, this shouldn't have happened..
zh_TW: 嗯，沒有任何錯誤，這不應該發生..

en: WARNING: the package cache is opened in read-only mode!  This change and all subsequent changes will not be saved unless you stop all other running apt-based programs and select "Become root" from the Actions menu.
zh_TW: 注意：套件緩衝是用唯讀模式打開！本次更改和其他更改將不會被保留，除非你暫停其他給予 apt 的程序，並且在動作選單中選擇 "變為 root"。

en: Never display this message again.
zh_TW: 不要再顯示此信息。

en: You may not modify the state of any package while a download is underway.
zh_TW: 在下載還在繼續的時候，您不能修改任何套件的狀態。

en: You already are root!
zh_TW: 您已經是 root 了！

en: Invalid Get-Root-Command; it should start with su: or sudo:
zh_TW: 非法的取得 root 權限指令；應該從 su 或 sudo 開始：

en: Invalid Get-Root-Command; it should start with su: or sudo:, not %s:
zh_TW: 非法的取得 Root 指令；必須從 su 或 sudo 開始，而非 %s：

en: Loading cache
zh_TW: 載入快取

en: Really quit Aptitude?
zh_TW: 真的要退出 Aptitude 嗎？

en: Change the behavior of aptitude
zh_TW: 變更aptitude的運作

en: Really discard your personal settings and reload the defaults?
zh_TW: 真的要放棄您的個人設置並載入預設值嗎？

en: View available packages and choose actions to perform
zh_TW: 查看可選套件以及選擇要執行的動作

en: Recommended Packages
zh_TW: 推薦的套件

en: View packages that it is recommended that you install
zh_TW: 查看推薦您安裝的套件

en: Recommendations
zh_TW: 推薦

en: Information about %s
zh_TW: 關於 %s 的訊息

en: %s info
zh_TW: %s 訊息

en: Packages depending on %s
zh_TW: 依賴於 %s 的套件

en: Dependencies of %s
zh_TW: %s 的依賴關係

en: %s reverse deps
zh_TW: %s 反向相依

en: %s deps
zh_TW: %s 相依

en: Available versions of %s
zh_TW: %s可用的版本

en: %s versions
zh_TW: %s版本號

en: Aptitude %s%n%nCopyright 2000-2008 Daniel Burrows.%n%naptitude comes with %BABSOLUTELY NO WARRANTY%b; for details see 'license' in the Help menu.  This is free software, and you are welcome to redistribute it under certain conditions; see 'license' for details.
zh_TW: Aptitude %s%n%n版權所有 2000-2008 Daniel Burrows。%n%n使用 Aptitude 軟體%B無任何擔保%b；細節請參閱求助選單的“授權條款”項目。這是自由軟體，歡迎您遵照特定條款散佈該軟體；細節請查閱“license”檔案。

en: License
zh_TW: 授權條款

en: View the terms under which you may copy and distribute aptitude
zh_TW: 查看您可以在何種條款下複製和散佈aptitude

note: TRANSLATORS: You can translate help.txt and set the filename here.
en: Localized file|help.txt
zh_TW: help-zh_TW.txt

en: Encoding of help.txt|UTF-8
zh_TW: 幫助文件的編碼|big-5

en: Online Help
zh_TW: 線上求助

en: View a brief introduction to aptitude
zh_TW: 檢視 aptitude 的簡易介紹

en: Help
zh_TW: 求助

note: TRANSLATORS: You can translate README and set the filename here.
en: Localized file|README
zh_TW: README

en: Encoding of README|ISO_8859-1
zh_TW: 讀我檔的編碼|ISO_8859-1

en: User's Manual
zh_TW: 使用者手冊

en: Read the full user's manual of aptitude
zh_TW: 閱讀 aptitude 的完整的使用者手冊

en: Manual
zh_TW: 為手動

en: FAQ
zh_TW: 常見問題

en: View a list of frequently asked questions
zh_TW: 瀏覽常見問題列表

en: News
zh_TW: 新聞

en: View the important changes made in each version of %s
zh_TW: 查看%s的每一版本中的重大修改

en: Unable to remove the old temporary directory; you should remove %s by hand.
zh_TW: 無法刪除舊的臨時目錄；你需要手動刪除 %s。

en: Will not remove %s; you should examine the files in it and remove them by hand.
zh_TW: 不會刪除 %s；你需要堅持該目錄內的檔案，然後手動刪除。

en: It appears that a previous version of aptitude left files behind in %s.  These files are probably useless and safe to delete.%n%nDo you want to remove this directory and all its contents?  If you select "No", you will not see this message again.
zh_TW: 好像上一個版本的 aptitude 在 %s 中留了一些檔案。這些檔案基本上沒什麼用處了，可以安裝的刪除。%n%n你要刪除這些目錄和裡面的內容嗎？如果你選擇“不”，你將不會再看到這條訊息。

en: View the progress of the package download
zh_TW: 檢視套件下載進度

en: Package Download
zh_TW: 套件下載

en: %BWARNING%b: untrusted versions of the following packages will be installed!%n%nUntrusted packages could %Bcompromise your system's security%b.  You should only proceed with the installation if you are certain that this is what you want to do.%n%n
zh_TW: %B[警告]%b：將會安裝以下版本未受信賴的套件！%n%n未受信賴的套件有可能會%B危害到您系統的安全%b。 只有在您確定您真的要這麼做時，您才可以進行安裝作業。%n%n

en: Really Continue
zh_TW: 繼續進行

en: Abort Installation
zh_TW: 放棄安裝

en: Preview of package installation
zh_TW: 預覽套件安裝

en: View and/or adjust the actions that will be performed
zh_TW: 檢視與/或調整即將執行的指令

en: Some packages were broken and have been fixed:
zh_TW: 某些毀斷的套件已經被修補！

en: No solution to these dependency problems exists!
zh_TW: 這些相依賴關係沒有解決方案！

en: Ran out of time while trying to resolve dependencies (press "%s" to try harder)
zh_TW: 試圖搜尋解決方案時用時已盡 (按“%s”加把勁兒再試試)

en: Installing/removing packages requires administrative privileges, which you currently do not have.  Would you like to change to the root account?
zh_TW: 安裝/刪除套件需要管理員權限，而您現在沒有這種權限。您想要進入 root 帳號嗎？

en: Become root
zh_TW: 變成 root(^B)

en: Don't become root
zh_TW: 不變成 root

en: No packages are scheduled to be installed, removed, or upgraded.
zh_TW: 沒有套件被預定安裝、升級或移除。

en: No packages will be installed, removed or upgraded.  Some packages could be upgraded, but you have not chosen to upgrade them.  Type "U" to prepare an upgrade.
zh_TW: 沒有套件將被安裝、移除或升級。某些套件可以被升級，但是您並沒有選擇升級它們。輸入 "U" 來準備升級。

en: Updating package lists
zh_TW: 正在更新套件列表

en: View the progress of the package list update
zh_TW: 檢視套件升級進度

en: List Update
zh_TW: 列表更新

en: Updating the package lists requires administrative privileges, which you currently do not have.  Would you like to change to the root account?
zh_TW: 更新套件列表需要管理員權限，而您現在沒有這種權限。您想要進入 root 帳號嗎？

en: Waste time trying to find mines
zh_TW: 玩玩踩地雷來消磨時間

en: Cleaning while a download is in progress is not allowed
zh_TW: 在下載進行過程中不允許執行清除

en: Downloaded package files have been deleted
zh_TW: 下載的檔案已經被刪除

en: The apt cache file is not available; cannot auto-clean.
zh_TW: 套件 cache 不可用：無法 auto-clean 。

en: Obsolete downloaded package files have been deleted, freeing %sB of disk space.
zh_TW: 過期的下載檔案已經被刪除，正在釋放 %sB 的磁碟空間。

en: No more solutions.
zh_TW: 沒有更多的解決方案了。

en: Unable to find a solution to apply.
zh_TW: 未能找到一個可以應用的解決方案。

en: Ran out of time while trying to find a solution.
zh_TW: 尋找解決方案時用時已盡。

en: Resolve Dependencies
zh_TW: 解決相依賴關係

en: Search for solutions to unsatisfied dependencies
zh_TW: 為未滿足的相依關係尋找解決方案

en: Unable to open %ls
zh_TW: 無法打開 %ls

en: Error while dumping resolver state
zh_TW: 傾印相依關係解決狀態時出錯

en: ^Install/remove packages
zh_TW: 安裝/移除套件(^I)

en: ^Update package list
zh_TW: 更新套件列表(^U)

en: Mark Up^gradable
zh_TW: 標記為可升級(^U)

en: ^Forget new packages
zh_TW: 忽略新套件(^F)

en: Canc^el pending actions
zh_TW: 取消待執行的動作(^E)

en: ^Clean package cache
zh_TW: 清除套件快取(^C)

en: Clean ^obsolete files
zh_TW: 關閉過期檔案(^O)

en: ^Reload package cache
zh_TW: 重新載入套件快取(^R)

en: ^Play Minesweeper
zh_TW: 玩採地雷(^P)

en: ^Become root
zh_TW: 變成 root(^B)

en: ^Quit
zh_TW: 退出(^Q)

en: Undo
zh_TW: 復原

en: ^Install
zh_TW: 安裝(^I)

en: Flag the currently selected package for installation or upgrade
zh_TW: 標示安裝或升級現選的套件

en: ^Remove
zh_TW: 移除(^R)

en: Flag the currently selected package for removal
zh_TW: 標示移除現選的套件

en: ^Purge
zh_TW: 清除(^P)

en: Flag the currently selected package and its configuration files for removal
zh_TW: 標示移除現選的套件與其設定檔

en: ^Keep
zh_TW: 保留(^K)

en: Cancel any action on the selected package
zh_TW: 取消選擇的套件上的任何動作

en: ^Hold
zh_TW: 保留(^H)

en: Cancel any action on the selected package, and protect it from future upgrades
zh_TW: 取消在選擇套件的任何指令，並保證未來也不升級

en: Mark ^Auto
zh_TW: 標示為自動(^A)

en: Mark the selected package as having been automatically installed; it will automatically be removed if no other packages depend on it
zh_TW: 標示自動安裝選擇的套件;如果沒有其他套件相依於上，它將會被自動移除

en: Mark ^Manual
zh_TW: 標示為手動處理(^M)

en: Mark the selected package as having been manually installed; it will not be removed unless you manually remove it
zh_TW: 標示手動安裝選擇的套件;除非您手動移除，否則它將不會被移除

en: ^Forbid Version
zh_TW: 禁制版本(^F)

en: Forbid the candidate version of the selected package from being installed; newer versions of the package will be installed as usual
zh_TW: 禁制安裝選擇套件的候選版本;新版本的套件將會像往常一樣被安裝

en: I^nformation
zh_TW: 資訊(^n)

en: Display more information about the selected package
zh_TW: 顯示選擇的套件之細節資訊

en: C^ycle Package Information
zh_TW: C^循環檢視套件資訊

en: Cycle through the modes of the package information area: it can show the package's long description, a summary of its dependency status, or an analysis of why the package is required.
zh_TW: 循環檢視套件的資料欄。它可顯示套件的進階描述，相依狀態摘要或套件是必須安裝的分析。

en: ^Changelog
zh_TW: 變更紀錄(^C)

en: Display the Debian changelog of the selected package
zh_TW: 顯示選擇套件的 Debian 更改紀錄

en: ^Examine Solution
zh_TW: 檢查解決方案(^E)

en: Examine the currently selected solution to the dependency problems.
zh_TW: 檢查當前選擇的處理相依問題的解決方案

en: Apply ^Solution
zh_TW: 套用解決方案(^S)

en: Perform the actions contained in the currently selected solution.
zh_TW: 確認當前選擇的解決方案中包含的動作。

en: ^Next Solution
zh_TW: 下一個解決方案(^N)

en: Select the next solution to the dependency problems.
zh_TW: 選擇解決此依賴問題的下一個方案。

en: ^Previous Solution
zh_TW: 前一個解決方案(^P)

en: Select the previous solution to the dependency problems.
zh_TW: 選擇解決此依賴問題的前一個方案。

en: ^First Solution
zh_TW: 第一個解決方案(^F)

en: Select the first solution to the dependency problems.
zh_TW: 選擇解決此依賴問題的第一個方案。

en: ^Last Solution
zh_TW: 最後一個解決方案(^L)

en: Select the last solution to the dependency problems that has been generated so far.
zh_TW: 選擇當前已經生成的解決此依賴問題的最後一個方案。

en: Toggle ^Rejected
zh_TW: 放棄(^R)

en: Toggle whether the currently selected action is rejected.
zh_TW: 切換是否放棄當前選擇的動作。

en: Toggle ^Approved
zh_TW: 確認(^A)

en: Toggle whether the currently selected action is approved.
zh_TW: 切換當前選擇的動作是否被允許。

en: ^View Target
zh_TW: 查看目標(^V)

en: View the package which will be affected by the selected action
zh_TW: 查看會被所選的動作影響的套件

en: Reject Breaking ^Holds
zh_TW: 否決損毀 ^Holds

en: Reject all actions that would change the state of held packages or install forbidden versions
zh_TW: 撒回所有更改被保留或禁止安裝的套件的動作

en: ^Find
zh_TW: 尋找(^F)

en: Search forwards
zh_TW: 向前搜尋：

en: ^Find Backwards
zh_TW: 向後尋找(^F)

en: Search backwards
zh_TW: 向後搜尋：

en: Find ^Again
zh_TW: 重新尋找(^A)

en: Repeat the last search
zh_TW: 重複最後尋找

en: Find Again ^Backwards
zh_TW: 向後尋找(^F)

en: Repeat the last search in the opposite direction
zh_TW: 重複最後尋找

en: ^Limit Display
zh_TW: 限制顯示(^L)

en: Apply a filter to the package list
zh_TW: 套用套件列表篩選

en: ^Un-Limit Display
zh_TW: 無限制顯示(^U)

en: Remove the filter from the package list
zh_TW: 移除套件列表的篩選

en: Find ^Broken
zh_TW: 搜尋損壞套件(^B)

en: Find the next package with unsatisfied dependencies
zh_TW: 尋找下個未滿足相依性的套件

en: ^Preferences
zh_TW: ^選項

en: ^UI options
zh_TW: 用戶界面選項(^U)

en: Change the settings which affect the user interface
zh_TW: 修改影響用戶界面的設置

en: ^Dependency handling
zh_TW: 處理依賴關係(^D)

en: Change the settings which affect how package dependencies are handled
zh_TW: 改變影響處理依賴關係的設置

en: ^Miscellaneous
zh_TW: 雜項(^M)

en: Change miscellaneous program settings
zh_TW: 改變程序的雜項設置

en: ^Revert options
zh_TW: 還原選項(^R)

en: Reset all settings to the system defaults
zh_TW: 把所有項目重設為它們的預設值

en: ^Next
zh_TW: 下一個(^N)

en: View next display
zh_TW: 查看下一個畫面

en: ^Prev
zh_TW: 上一個(^P)

en: View previous display
zh_TW: 查看上一畫面

en: ^Close
zh_TW: 關閉(^C)

en: Close this display
zh_TW: 關閉此畫面

en: New Package ^View
zh_TW: 新套件視野(^V)

en: Create a new default package view
zh_TW: 建立新的預設套件視野

en: Audit ^Recommendations
zh_TW: 檢查推薦結果(^R)

en: View packages which it is recommended that you install, but which are not currently installed.
zh_TW: 查看推薦您安裝，但是現在尚未安裝的套件。

en: New ^Flat Package List
zh_TW: 新套件視野(^V)

en: View all the packages on the system in a single uncategorized list
zh_TW: 在一個未分類的列表中查看系統中的所有的套件

en: New ^Debtags Browser
zh_TW: 新型 Debtags 瀏覽器(^D)

en: Browse packages using Debtags data
zh_TW: 用 Debtags 的資料來瀏覽套件

en: ^About
zh_TW: 關於(^A)

en: View information about this program
zh_TW: 查看關於此程式的資訊

en: ^Help
zh_TW: 求助(^H)

en: View the on-line help
zh_TW: 查看線上求助

en: User's ^Manual
zh_TW: 用戶手冊(^M)

en: View the detailed program manual
zh_TW: 瀏覽詳細的使用手冊

en: ^FAQ
zh_TW: 常見問題(^F)

en: ^News
zh_TW: 新聞(^N)

en: View the important changes made in each version of
zh_TW: 查看每一版本中所做的重大修改

en: ^License
zh_TW: ^授權條款

en: Actions
zh_TW: 動作

en: Search
zh_TW: 搜尋

en: Options
zh_TW: 選項

en: Views
zh_TW: 查看

en: yes_key
zh_TW: y

en: no_key
zh_TW: n

en: %s changes
zh_TW: %s 個套件已改變

en: View the list of changes made to this Debian package.
zh_TW: 查看這個 Debian 套件的修訂列表
