debian-installer_packages_po_sublevel1_bs - en to bs translation catalogue (11 entries)

note: Type: text Description :sl4:
en: Install the Arcboot boot loader on a hard disk
bs: Instaliraj Arcboot boot loader na hard disk

note: Type: string Description :sl4:
en: Disk for boot loader installation:
bs: Disk za instalaciju boot loadera:

note: Type: string Description :sl4:
en: Arcboot must be installed into the volume header of a disk with a SGI disklabel. Usually the volume header of /dev/sda is used. Please give the device name of the disk on which to put arcboot.
bs: Arcboot se mora postaviti u zaglavlje diska sa SGI disklabel-om. Obično se koristi /dev/sda zaglavlje diska. Molim unesite ime diskovnog uređaja na koji želite postaviti arcboot:

note: Type: note Description :sl4:
en: Arcboot configured to use a serial console
bs: Arcboot podešen da koristi serijsku konzolu

note: Type: note Description :sl4:
en: Arcboot is configured to use the serial port ${PORT} as the console. The serial port speed is set to ${SPEED}.
bs: Arcboot je podešen da koristi serijski port ${PORT} kao konzolu. Brzina serijskog porta je postavljena na ${SPEED}.

note: Type: boolean Description :sl4:
en: Arcboot installation failed.  Continue anyway?
bs: Nemogu da instaliram Arcboot.  Nastaviti dalje?

note: Type: boolean Description :sl4:
en: The arcboot package failed to install into /target/.  Installing Arcboot as a boot loader is a required step.  The install problem might however be unrelated to Arcboot, so continuing the installation may be possible.
bs: Arcboot paket se nije uspio instalirati na /target/.  Potrebno je instalirati Arcboot kao boot loader.  Moguće da instalacijski problem nije vezan za Arcboot i da je u redu da nastavite.

note: Type: note Description :sl4: Translators, the 4th string of this description has been dropped from PO files. It contains firmware commands and should not be translated.
en: Setting PROM variables for Arcboot
bs: Postavljam PROM varijable za Arcboot

note: Type: note Description :sl4: Translators, the 4th string of this description has been dropped from PO files. It contains firmware commands and should not be translated.
en: If this is the first Linux installation on this machine, or if the hard drives have been repartitioned, some variables need to be set in the PROM before the system is able to boot normally.
bs: Ako je ovo prva Linux instalacija na ovoj mašini, ili ako su hard diskovi reparticionisani, određene varijable trebaju biti postavljene u PROM prije nego se sistem mogne normalno podići.

note: Type: note Description :sl4: Translators, the 4th string of this description has been dropped from PO files. It contains firmware commands and should not be translated. "Stop for Maintenance" should be left in English
en: At the end of this installation stage, the system will reboot.  After this, enter the command monitor from the "Stop for Maintenance" option, and enter the following commands:
bs: Na kraju ove instalacione faze, sistem će se ponovo podići.  Nakon toga, uđite u komandni monitor preko "Stop for Maintenance" opcije i ukucajte sljedeće naredbe:

note: Type: note Description :sl4: Translators, the 4th string of this description has been dropped from PO files. It contains firmware commands and should not be translated.
en: You will only need to do this once.  Afterwards, enter the "boot" command or reboot the system to proceed to your newly installed system.
bs: Ovo trebate uraditi samo jednom.  Nakon toga, ukucajte "boot" naredbu ili ponovo podignite sistem kako biste nastavili k vašem novo instaliranom sistemu.
