dbconfig-common-eu-1.8.58 - en to eu translation catalogue (104 entries)

note: Type: boolean Description
en: Will this server be used to access remote databases?
eu: Zerbitzari hau urruneko datu-baseak atzitzeko erabiliko da?

note: Type: boolean Description
en: For the database types that support it, dbconfig-common includes support for configuring databases on remote systems. When installing a package's database via dbconfig-common, the questions related to remote configuration are asked with a priority such that they are skipped for most systems.
eu: Onartzen dituen datu-base motentzat, 'dbconfig-common'-ek urruneko sistemetako datu-baseak konfiguratzeko euskarria du. 'dbconfig-common' bidez  paketearen datu-basea instalatzean, halako lehentasuna daukaten (eta sistema gehienetan saltatzen diren) urruneko konfigurazioari buruzko galderak egingo dira.

note: Type: boolean Description
en: If you select this option, the default behavior will be to prompt you with questions related to remote database configuration when you install new packages.
eu: Aukera hau hautatzen bada, portaera lehenetsiak urruneko datu-basearen konfigurazioari buruzko galderak egingo dizkizu pakete berriak instalatzen dituzunean.

note: Type: boolean Description
en: If you are unsure, you should not select this option.
eu: Ziur ez bazaude, ez zenuke aukera hau hautatu beharko.

note: Type: boolean Description
en: Remember database passwords permanently in debconf?
eu: Gogoratu datu-baseen pasahitzak betirako debconf-ekin?

note: Type: boolean Description
en: When you configure, upgrade, or remove applications with dbconfig-common, administrator-level database passwords are needed. By default, these passwords are not stored, so you will be prompted for them each time.
eu: dbconfig-common tresnarekin aplikazioak konfiguratu, bertsio-berritu edo kentzen dituzunean, administratzaile-mailako datu-basearen pasahitzak beharrezkoak dira. Lehenetsi gisa, pasahitz hauek ez dira gordetzen, ondorioz hauengatik galdetuko zaizu aldi bakoitzean.

note: Type: boolean Description
en: Alternatively the passwords can be permanently remembered in the debconf database (which is protected by Unix file permissions), though this is less secure and thus not the default setting.
eu: Bestalde, pasahitzak debconf-en datu-basean betirako gorde daitezke. Datu-base hori Unix-eko fitxategien baimenekin babestuta dagoenez, ez dago erabat babestuta. Hori dela eta, ez da ezarpen lehenetsia.

note: Type: boolean Description
en: If you would rather not be bothered for an administrative password every time you upgrade a database application with dbconfig-common, you should choose this option. Otherwise, you should refuse this option.
eu: Hautatu aukera hau datu-basearen aplikazioa dbconfig-common tresnarekin bertsio-berritzen den bakoitzean administratzailearen pasahitza ez eskatzeko. Bestela, ukatu aukera hau.

note: Type: boolean Description
en: Configure database for ${pkg} with dbconfig-common?
eu: Konfiguratu ${pkg}-ren datu-basea dbconfig-common erabiliz?

note: Type: boolean Description
en: The ${pkg} package must have a database installed and configured before it can be used. This can be optionally handled with dbconfig-common.
eu: ${pkg} paketeak instalatutako eta konfiguratutako datu-base bat eduki behar du erabili aurretik. Nahi izanez gero, hau dbconfig-common bidez kudea daiteke.

note: Type: boolean Description
en: If you are an advanced database administrator and know that you want to perform this configuration manually, or if your database has already been installed and configured, you should refuse this option. Details on what needs to be done should most likely be provided in /usr/share/doc/${pkg}.
eu: Datu-basearen administratzaile aurreratu bat bazara, eta konfigurazio hau eskuz egitea nahi baduzu, edo datu-basea jadanik instalatuta eta konfiguratuta badago, aukera honi ez ikusi egin diezaiokezu. Zer egin behar den buruzko xehetasunak hemen aurki dezakezu: /usr/share/doc/${pkg}.

note: Type: boolean Description
en: Otherwise, you should probably choose this option.
eu: Bestela, baliteke aukera hautatu behar izatea.

note: Type: boolean Description
en: Reinstall database for ${pkg}?
eu: Berrinstalatu ${pkg}-ren datu-basea?

note: Type: boolean Description
en: Since you are reconfiguring ${pkg}, you may also want to reinstall the database which it uses.
eu: ${pkg} birkonfiguratzen ari zarenez, baliteke erabiltzen duen datu-basea berrinstalatu nahi izatea.

note: Type: boolean Description
en: If you wish to reinstall the database for ${pkg}, you should select this option. If you do not wish to do so (if you are reconfiguring the package for unrelated reasons), you should not select this option.
eu: Hautatu aukera hau ${pkg}-ren datu-basea berrinstalatzea nahi baduzu. Ez baduzu halakorik egiterik nahi (paketea beste arrazoi bategatik birkonfiguratzen ari bazara), ez zenuke aukera hau hautatu beharko.

note: Type: boolean Description
en: Warning: if you opt to reinstall the database and install it under a name that already exists, the old database will be dropped without further questions. In that case a backup of the original database is made in /var/tmp/.
eu: Abisua: datu-basea berrinstalatzea hautatzen baduzu, eta jadanik existitzen den izen batekin instalatzen baduzu, datu-base zaharra erabat ezabatu egingo da bestelako galderarik gabe. Kasu horretan, jatorrizko datu-basearen babeskopia hemen egingo da: /var/tmp/.

note: Type: boolean Description
en: Warning: if you change the name of the database, the old database will not be removed. If you change the name of the user that connects to the database, the privileges of the original user will not be revoked.
eu: Abisua: datu-basearen izena aldatu baduzu, datu-base zaharra ez da ezabatuko. Datu-basearekin konektatzen den erabiltzailearen izena aldatzen baduzu, jatorrizko erabiltzailearen pribilegioak ez dira kenduko.

note: Type: boolean Description
en: Perform upgrade on database for ${pkg} with dbconfig-common?
eu: Bertsio-berritu ${pkg}-ren datu-basea dbconfig-common tresnarekin?

note: Type: boolean Description
en: According to the maintainer for this package, database upgrade operations need to be performed on ${pkg}. Typically, this is due to changes in how a new upstream version of the package needs to store its data.
eu: Pakete honen arduradunak dioenez, datu-basearen bertsio-berritzearen eragiketak ${pkg}-en landu behar dira. Paketearen bertsio berri batek datuak gordetzeko era aldatu duelako gertatu ohi da.

note: Type: boolean Description
en: If you want to handle this process manually, you should refuse this option. Otherwise, you should choose this option. During the upgrade, a backup of the database will be made in /var/cache/dbconfig-common/backups, from which the database can be restored in the case of problems.
eu: Prozesu hau eskuz kudeatu nahi izanez gero, aukera hau ezetsi beharko zenuke. Bestela, aukera hau erabili beharko zenuke. Bertsio-berritzean datu-basearen babeskopia bat egingo da /var/cache/dbconfig-common/backups karpetan arazorik izanez gero berreskuratu ahal izateko.

note: Type: boolean Description
en: Deconfigure database for ${pkg} with dbconfig-common?
eu: Kendu ${pkg}-ren datu-basearen konfigurazioa dbconfig-common tresnarekin?

note: Type: boolean Description
en: Since you are removing ${pkg}, it's possible that you no longer want the underlying database and the privileges for the user associated with this package.
eu: ${pkg} kentzen ari zarenez, baliteke azpiko datu-basea eta pakete honi esleitutako erabiltzailearen pribilegioak aurrerantzean nahi ez izatea.

note: Type: boolean Description
en: Please choose whether database removal and privilege revocation should be handled with dbconfig-common.
eu: Aukeratu datu-basea eta pribilegioa kentzea dbconfig-common tresnarekin kudeatuko den edo ez.

note: Type: boolean Description
en: If you choose this option, dbconfig-common will check if ${pkg} provided scripts and database commands to undo package specific operations and run them if they exist. Then it will ask if you want to delete the ${pkg} database and revoke the standard privileges for the user of ${pkg}. If you don't want any of this, or if you want to handle this manually, you should refuse this option.
eu: Aukera hau hautatzean, dbconfig-common tresnak ${pkg} paketeak scriptak eta datu-basearen komandoak eskaintzen dituen begiratzen du paketearen eragiketa zehatzak desegiteko, eta existituz gero, haiek exekutatzeko. Ondoren, ${pkg} datu-basea erabat kentzea eta ${pkg} paketearen erabiltzailearen pribilegioak kentzea nahi dituzun galdetuko dizu. Hauetariko ezer ez baduzu nahi, edo hau eskuz kudeatzea nahi baduzu, aukera honi ez ikus egin diezaiokezu.

note: Type: select Description
en: Database type to be used by ${pkg}:
eu: ${pkg}-ek erabiliko duen datu-base mota:

note: Type: select Description
en: The ${pkg} package can be configured to use one of several database types. Below, you will be presented with the available choices.
eu: ${pkg} paketea hainbat datu-basetariko bat erabiltzeko konfigura daiteke. Behean aukera erabilgarriak erakutsiko dira.

note: Type: select Description
en: If other database types are supported by ${pkg} but not shown here, the reason for their omission is that the corresponding dbconfig-<database type> packages are not installed. If you know that you want the package to use another supported database type, your best option is to back out of the dbconfig-common questions and opt out of dbconfig-common assistance for this package for now. Install your preferred dbconfig-<database type> option from the list in the package dependencies, and then "dpkg-reconfigure ${pkg}" to select it.
eu: ${pkg}(e)k hemen erakusten ez diren beste datu-base motak onartzen baditu, ezkutatzeko zergatia hau da: dagokien dbconfig-<datu-base mota> paketeak instalatu gabe egotea. Paketeak beste datu-base mota bat erabiltzea nahi baduzu, oraingoz 'dbconfig-common'-eko galderetan atzera egin eta aukeratu 'dbconfig-common'-ren laguntza. Instalatu zure dbconfig-<datu-base mota>  hobetsiaren aukera paketeen mendekotasunen zerrendatik, eta ondoren, landu 'dpkg-reconfigure ${pkg}' hura hautatzeko.

note: Type: boolean Description
en: Delete the database for ${pkg}?
eu: ${pkg}-ren datu-basea ezabatu?

note: Type: boolean Description
en: If you no longer need the database for ${pkg} and the privileges of the database user of ${pkg}, you can choose to delete the database and revoke the privileges now.
eu: ${pkg}-ren datu-basea eta ${pkg} paketearen erabiltzailearen pribilegioak ez badituzu gehiago behar, orain aukera dezakezu datu-basea ezabatzea eta pribilegioak kentzea.

note: Type: boolean Description
en: If you no longer have need of the data being stored by ${pkg}, you should choose this option. If you want to keep this data, or if you would rather handle this process manually, you should refuse this option. Either way, it won't affect your other databases.
eu: ${pkg}-ek gordetako datuak ez badituzu gehiago behar, hautatu aukera hau. Datuak mantentzea, edo prozesu hau eskuz kudeatzea nahiago baduzu, ez ikusi egin aukera honi. Dena den, honek ez dio zure beste datu-baseei eragingo.

note: Type: boolean Description
en: Back up the database for ${pkg} before upgrading?
eu: Bertsio-berritu aurretik ${pkg}-ren datu-basearen babeskopia egin?

note: Type: boolean Description
en: The underlying database for ${pkg} needs to be upgraded as part of the installation process. Just in case, the database can be backed up before this is done, so that if something goes wrong, you can revert to the previous package version and repopulate the database.
eu: Instalazio prozesuaren zati bezala ${pkg}-ren oinarrizko datu-basea eguneratu behar da. Bada ezpada, datu-basearen babeskopia egingo da bertsio-berritu aurretik, gero zerbait oker joanez gero paketearen aurreko bertsiora itzuli eta datu-basea berreskuratu ahal izateko.

note: Type: password Description
en: Password confirmation:
eu: Pasahitzaren berrespena:

note: Type: error Description
en: Password mismatch
eu: Pasahitzak ez dira berdinak

note: Type: error Description
en: The password and its confirmation do not match.
eu: Pasahitza eta bere berrespena ez dira berdinak.

note: Type: select Choices
en: abort
eu: bertan behera utzi

note: Type: select Choices
en: retry
eu: saiatu berriro

note: Type: select Choices
en: retry (skip questions)
eu: saiatu berriro (galderarik ez)

note: Type: select Choices
en: ignore
eu: ez ikusi egin

note: Type: select Description
en: Next step for database upgrade:
eu: Datu-basea bertsio-berritzearen hurrengo urratsa:

note: Type: select Description
en: An error occurred while upgrading the database:
eu: Errorea gertatu da datu-basea bertsio-berritzean:

note: Type: select Description Translators, note that the bullets have a leading space which means that debconf will not word-wrap those lines. This means that you will have to make sure that all lines in the list end with \n and you will have to keep the lines below 72 characters to avoid problems.
en: Fortunately, ${dbfile} should hold a backup of the database, made just before the upgrade (unless the error occurred during backup creation, in which case no changes will have been applied yet). Your options are:
     * abort - Causes the operation to fail; you will need to downgrade,
       reinstall, reconfigure this package, or otherwise manually intervene
       to continue using it. This will usually also impact your ability to
       install other packages until the installation failure is resolved.
     * retry - Prompts once more with all the configuration questions
       (including ones you may have missed due to the debconf priority
       setting) and makes another attempt at performing the operation.
     * retry (skip questions) - Immediately attempts the operation again,
       skipping all questions. This is normally useful only if you have
       solved the underlying problem since the time the error occurred.
     * ignore - Continues the operation ignoring dbconfig-common errors.
       This will usually leave this package without a functional database.
eu: Zorionez, ${dbfile}-ek datu-basearen babeskopia bat eduki beharko luke, bertsio-berritu aurretik egindakoa (babeskopia sortzean errorerik ez bada gertatu bederen, egoera horretan aldaketak ez dira oraindik aplikatu). Aukera hauek dituzu:
     * abortatu - Eragiketa huts eginarazten du. Pakete hau bertsio
       zaharrarekin berrinstalatu eta birkonfiguratu beharko duzu; bestela,
       eskuz egin hura erabiltzen jarraitzeko. Huts egindako instalazioa
       konpondu arte beste pakete batzuk instalatzean eragina izan lezake.
     * saiatu berriro - Konfigurazioaren galdera guztiak galdetzen ditu
       beste behin, (debconf-en lehentasuna dela eta baztertutako galderak
       barne) eta beste behin eragiketa egiten saiatzen da.
     * saiatu berriro (saihestu galderak) Eragiketa berriro egiten saiatzen da
       berehala, galdera guztiak saltatuz. Erabilgarria izan ohi da errorea
       gertatu zeneko mendeko arazoa konponduta duzun kasuan.
     * ez ikusi egin - Eragiketarekin jarraitzen du, 'dbconfig-common'
       tresnaren erroreei ez ikusi eginez. Pakete hau datu-base erabilgarri
       bat gabe utzi ohi du.

note: Type: select Description
en: Next step for database installation:
eu: Datu-basearen instalazioaren hurrengo urratsa:

note: Type: select Description
en: An error occurred while installing the database:
eu: Errorea gertatu da datu-basea instalatzean:

note: Type: select Description Translators, note that the bullets have a leading space which means that debconf will not word-wrap those lines. This means that you will have to make sure that all lines in the list end with \n and you will have to keep the lines below 72 characters to avoid problems.
en: Your options are:
     * abort - Causes the operation to fail; you will need to downgrade,
       reinstall, reconfigure this package, or otherwise manually intervene
       to continue using it. This will usually also impact your ability to
       install other packages until the installation failure is resolved.
     * retry - Prompts once more with all the configuration questions
       (including ones you may have missed due to the debconf priority
       setting) and makes another attempt at performing the operation.
     * retry (skip questions) - Immediately attempts the operation again,
       skipping all questions. This is normally useful only if you have
       solved the underlying problem since the time the error occurred.
     * ignore - Continues the operation ignoring dbconfig-common errors.
       This will usually leave this package without a functional database.
eu: Aukera hauek dituzu:
     * abortatu - Eragiketa huts eginarazten du. Pakete hau bertsio
       zaharrarekin berrinstalatu eta birkonfiguratu beharko duzu; bestela,
       eskuz egin hura erabiltzen jarraitzeko. Huts egindako instalazioa
       konpondu arte beste pakete batzuk instalatzean eragina izan lezake.
     * saiatu berriro - Konfigurazioaren galdera guztiak galdetzen ditu
       beste behin, (debconf-en lehentasuna dela eta baztertutako galderak
       barne) eta beste behin eragiketa egiten saiatzen da.
     * saiatu berriro (saihestu galderak) Eragiketa berriro egiten saiatzen
       da berehala, galdera guztiak saltatuz. Erabilgarria izan ohi da
       errorea gertatu zeneko mendeko arazoa konponduta duzun kasuan.
     * ez ikusi egin - Eragiketarekin jarraitzen du, 'dbconfig-common'
       tresnaren erroreei ez ikusi eginez. Pakete hau datu-base erabilgarri
       bat gabe utzi ohi du.

note: Type: select Description
en: Next step for database removal:
eu: Datu-base ezabatzearen hurrengo urratsa:

note: Type: select Description
en: An error occurred while removing the database:
eu: Errorea gertatu da datu-basea ezabatzean:

note: Type: select Description Translators, note that the bullets have a leading space which means that debconf will not word-wrap those lines. This means that you will have to make sure that all lines in the list end with \n and you will have to keep the lines below 72 characters to avoid problems.
en: As a result it was not possible to remove the database for ${pkg}. Your options are:
     * abort - Causes the operation to fail; you will need to downgrade,
       reinstall, reconfigure this package, or otherwise manually intervene
       to continue using it. This will usually also impact your ability to
       install other packages until the installation failure is resolved.
     * retry - Prompts once more with all the configuration questions
       (including ones you may have missed due to the debconf priority
       setting) and makes another attempt at performing the operation.
     * retry (skip questions) - Immediately attempts the operation again,
       skipping all questions. This is normally useful only if you have
       solved the underlying problem since the time the error occurred.
     * ignore - Continues the operation ignoring dbconfig-common errors.
       This will usually leave the database and user privileges in place.
eu: Ondorioz, ezin izan da ${pkg}-ren datu-basea kendu. Aukera hauek dituzu:
     * abortatu - Eragiketa huts eginarazten du. Pakete hau bertsio
       zaharrarekin berrinstalatu eta birkonfiguratu beharko duzu; bestela,
       eskuz egin hura erabiltzen jarraitzeko. Huts egindako instalazioa
       konpondu arte beste pakete batzuk instalatzean eragina izan lezake.
     * saiatu berriro - Konfigurazioaren galdera guztiak galdetzen ditu
       beste behin, (debconf-en lehentasuna dela eta baztertutako galderak
       barne) eta beste behin eragiketa egiten saiatzen da.
     * saiatu berriro (saihestu galderak) Eragiketa berriro egiten saiatzen
       da berehala, galdera guztiak saltatuz. Erabilgarria izan ohi da
       errorea gertatu zeneko mendeko arazoa konponduta duzun kasuan.
     * ez ikusi egin - Eragiketarekin jarraitzen du, 'dbconfig-common'
       tresnaren erroreei ez ikusi eginez. Pakete hau datu-base erabilgarri
       bat gabe utzi ohi du.

note: Type: select Description
en: Next step:
eu: Hurrengo urratsa:

note: Type: select Description
en: Configuring the database for ${pkg} requires the package ${dbpackage} to be installed and configured first, which is not something that can be checked for automatically.
eu: ${pkg}-ren datu-basea konfiguratzeko lehenik ${dbpackage} paketea instalatu eta konfiguratuta egon behar da, hau ezin da automatikoki egiaztatu.

note: Type: select Description Translators, note that the bullets have a leading space which means that debconf will not word-wrap those lines. This means that you will have to make sure that all lines in the list end with \n and you will have to keep the lines below 72 characters to avoid problems. Addit
en: Your options are:
     * abort - Choose this when in doubt and install ${dbpackage} before
       continuing with the configuration of this package. This causes the
       installation of ${pkg} to fail for now.
     * retry - Prompts once more with all the configuration questions
       (including ones you may have missed due to the debconf priority
       setting) and makes another attempt at performing the operation.
       Choose this if you chose the wrong database type by mistake.
     * ignore - Continues the operation ignoring dbconfig-common errors.
       This will usually leave this package without a functional database.
eu: Aukera hauek dituzu:
     * abortatu - Aukeratu hau zalantzarik edukiz gero, eta instalatu
       ${dbpackage} jarraitu aurretik pakete honen konfigurazioarekin.
       Honek ${pkg}-ren instalazioak huts eginarazten du oraingoz.
     * saiatu berriro - Konfigurazioaren galdera guztiak galdetzen ditu
       beste behin, (debconf-en lehentasuna dela eta baztertutako galderak
       barne) eta beste behin eragiketa egiten saiatzen da. Aukeratu hau
       nahi gabe okerreko datu-base mota bat hautatu baduzu.
     * ez ikusi egin - Eragiketarekin jarraitzen du, 'dbconfig-common'
       tresnaren erroreei ez ikusi eginez. Pakete hau datu-base erabilgarri
       bat gabe utzi ohi du.

note: Type: select Description
en: Host name of the ${dbvendor} database server for ${pkg}:
eu: ${pkg}-ren ${dbvendor} zerbitzariaren ostalari-izena:

note: Type: select Description
en: Please select the remote hostname to use, or select "new host" to enter a new host.
eu: Hautatu urruneko ostalari-izena, edo hautatu 'ostalari berria' ostalari-izen berri bat emateko.

note: Type: string Description
en: Port number for the ${dbvendor} service:
eu: ${dbvendor} zerbitzuaren ataka zenbakia:

note: Type: string Description
en: Please specify the port the ${dbvendor} database on the remote host is running on. To use the default port, leave this field blank.
eu: Zehaztu urruneko ostalariko ${dbvendor} datu-baseak erabiltzen duen ataka. Ataka lehenetsia erabiltzeko, utzi eremu hau hutsik.

note: Type: string Description
en: Host running the ${dbvendor} server for ${pkg}:
eu: ${pkg}-ren ${dbvendor} zerbitzaria duen ostalaria:

note: Type: string Description
en: Please provide the hostname of a remote ${dbvendor} server.
eu: Eman urruneko ${dbvendor} zerbitzariaren ostalari-izena.

note: Type: string Description
en: You must have already arranged for the administrative account to be able to remotely create databases and grant privileges.
eu: Dagoeneko, urruneko datu-baseak eta pribilegioen baimenak emateko administratzailearen kontua eduki beharko zenuke.

note: Type: string Description
en: ${dbvendor} database name for ${pkg}:
eu: ${pkg}-ren ${dbvendor} datu-basearen izena:

note: Type: string Description
en: Please provide a name for the ${dbvendor} database to be used by ${pkg}.
eu: Eman ${pkg}-ek erabiliko duen ${dbvendor} datu-basearen izena.

note: Type: string Description
en: ${dbvendor} username for ${pkg}:
eu: ${pkg}-ren ${dbvendor} erabiltzaile-izena:

note: Type: string Description
en: Please provide a ${dbvendor} username for ${pkg} to register with the database server. A ${dbvendor} user is not necessarily the same as a system login, especially if the database is on a remote server.
eu: Eman ${pkg}-ren ${dbvendor} erabiltzaile izena.  ${dbvendor} erabiltzailea ez da halabeharrez sisteman sartzeko erabiltzaile berdina izan behar, bereiziki datu-basea urruneko zerbitzari batean badago.

note: Type: string Description
en: This is the user which will own the database, tables, and other objects to be created by this installation. This user will have complete freedom to insert, change, or delete data in the database.
eu: Datu-base, taula eta instalatzaileak sortutako beste gauzen jabea izango da erabiltzaile hau. Erabiltzaile honek datu-basean datuak sartu, aldatu edo ezabatzeko baimenak izango ditu.

note: Type: string Description
en: If your username contains an @, you need to specify the domain as well (see below).
eu: Erabiltzaile-izenak @ karaktere bat badu, domeinua ere zehaztu beharko duzu (ikus azpian).

note: Type: string Description
en: Advanced usage: if you need to define the domain that the user will log in from, you can write "username@domain".
eu: Erabilera aurreratua: domeinu bateko erabiltzaile bat definitzeko "erabiltzaile_izena@domeinua" idatz dezakezu.

note: Type: string Description
en: ${dbvendor} storage directory for ${pkg}:
eu: ${pkg}-ren ${dbvendor} biltegiaren direktorioa:

note: Type: string Description
en: Please provide a path where the ${dbvendor} database file for ${pkg} should be installed into.
eu: Eman bide-izena ${pkg}-ren ${dbvendor} datu-basearen fitxategia hor instalatzeko.

note: Type: string Description
en: The permissions for this directory will be set to match the permissions for the generated database file.
eu: Direktorio horren baimenak sortutako datu-basearen baimen berdinekin ezarriko dira.

note: Type: select Choices
en: Unix socket
eu: Unix socket-a

note: Type: select Description
en: Connection method for MySQL database of ${pkg}:
eu: ${pkg}-ren MySQL datu-basearekiko konexio-metodoa:

note: Type: select Description
en: By default, ${pkg} will be configured to use a MySQL server through a local Unix socket (this provides the best performance). To connect with a different method, or to a different server entirely, select the appropriate option from the choices here.
eu: Lehenetsi gisa, MySQL zerbitzarira lokaleko Unix socket-aren bidez konektatzeko konfiguratuko da ${pkg}. Bestelako metodo batekin konektatzeko, edo beste zerbitzari batekin konektatzeko, hautatu dagokion aukera.

note: Type: password Description
en: MySQL application password for ${pkg}:
eu: ${pkg}-ren MySQL aplikazioren pasahitza:

note: Type: password Description
en: Please provide a password for ${pkg} to register with the database server. If left blank, a random password will be generated.
eu: Eman ${pkg}-ren pasahitza datu-basearen zerbitzarian erregistratzeko. Utzi eremu hau hutsik ausazko pasahitza sortzeko.

note: Type: string Description
en: Name of the database's administrative user:
eu: Datu-basearen administratzailearen erabiltzaile-izena:

note: Type: string Description
en: Please provide the name of the account with which this package should perform administrative actions. This user is the one with the power to create new database users.
eu: Eman pakete honek administratzailearen ekintzak aurrera eramateko erabiliko duen kontuaren izena. Erabiltzaile hau datu-basearen erabiltzaile berriak sortzeko baimena duena da.

note: Type: string Description
en: For MySQL, this is almost always "root". Note that this is not the same as the Unix login "root".
eu: MySQL kasuan, ia beti "root" izaten da. Kontuan izan hau EZ dela Unix sistemetako "root" erabiltzaile berdina.

note: Type: password Description
en: Password of the database's administrative user:
eu: Datu-basearen administratzailearen pasahitza:

note: Type: password Description
en: Please provide the password for the administrative account "${dbadmin}" with which this package should create its MySQL database and user.
eu: Eman "${dbadmin}" administratzaile-kontuaren pasahitza, pakete honek bere MySQL datu-basea eta erabiltzailea sortzeko.

note: Type: select Description
en: Connection method for PostgreSQL database of ${pkg}:
eu: ${pkg}-ren PostgreSQL-rekiko konexio metodoa:

note: Type: select Description
en: By default, ${pkg} will be configured to use a PostgreSQL server through TCP/IP because that method works in most circumstances. To connect with a different method, select the appropriate option from the choices here.
eu: Lehenetsi gisa, PostgreSQL zerbitzarira TCP/IP bidez konektatzeko konfiguratuko da ${pkg}, modu horrek egoera gehienetan funtzionatzen baitu. Bestelako metodo batekin konektatzeko, hautatu dagokion aukera.

note: Type: password Description
en: PostgreSQL application password for ${pkg}:
eu: ${pkg}-ren PostgreSQL aplikazioaren pasahitza:

note: Type: password Description
en: If you are using "ident" authentication, the supplied password will not be used and can be left blank. Otherwise, PostgreSQL access may need to be reconfigured to allow password-authenticated access.
eu: "ident"-en oinarritutako autentifikazioa erabiltzen baduzu, emandako pasahitza ez da erabiliko eta hutsik utz daiteke. Bestela, PostgreSQL-rerako sarbidetza birkonfiguratzea behar lezake pasahitz autentifikazioarekin sarbidetzea baimentzeko.

note: Type: password Description
en: Password of your database's administrative user:
eu: Zure datu-basearen administratzailearen pasahitza:

note: Type: password Description
en: Please provide the password for the ${dbadmin} account with which this package should perform administrative actions.
eu: Eman ${dbadmin}-en pasahitza pakete honek administratzailearen ekintzak aurrera eramateko.

note: Type: password Description
en: For a standard PostgreSQL installation, a database password is not required, since authentication is done at the system level.
eu: Ez da datu-basearen pasahitzik behar PostgreSQL-ren instalazio arrunta egiteko, autentifikazioa sistema mailan egiten baita.

note: Type: select Choices
en: password
eu: pasahitza

note: Type: select Description
en: Method for authenticating the PostgreSQL administrator:
eu: PostgreSQL-eko administratzailea autentifikatzeko metodoa:

note: Type: select Description
en: PostgreSQL servers provide several different mechanisms for authenticating connections. Please select what method the administrative user should use when connecting to the server.
eu: PostgreSQL zerbitzariek hainbat metodo eskaintzen dituzte konexioak autentifikatzeko. Hautatu administratzaileak erabiliko duen metodoa zerbitzariarekin konektatzeko.

note: Type: select Description
en: With "ident" authentication on the local machine, the server will check that the owner of the Unix socket is allowed to connect. PostgreSQL itself calls this peer authentication.
eu: Makina lokalean "ident" autentifikazioarekin zerbitzariak Unix socket-aren jabea konektatzeko baimenduta dagoen egiaztatuko du. PostgreSQL berak autentifikazioaren pareko honi deitzen dio.

note: Type: select Description
en: With "ident" authentication to remote hosts, RFC-1413-based ident is used (which can be considered a security risk).
eu: Urruneko makinatarako "ident" autentifikazioarekin, RFC 1413-an oinarritutako egiaztapena erabiliko da (kontutan izan segurtasun arrisku bat izan daitekeela).

note: Type: select Description
en: With "password" authentication, a password will be passed to the server for use with some authentication backend (such as "MD5" or "PAM"). Note that the password is still passed in the clear across network connections if your connection is not configured to use SSL.
eu: "Pasahitza" autentifikazioarekin pasahitz bat igorriko zaio zerbitzariari egiaztapen-motor batekin erabiltzeko ("MD5" edo "PAM" adibidez).  Kontutan izan pasahitza testu lauan igorriko dela segurua ez den konexioarekin (ez baduzu SSL erabiltzeko konfiguratu).

note: Type: select Description
en: For a standard PostgreSQL installation running on the same host, "ident" is recommended.
eu: "ident" gomendatzen da PostgreSQL-ren instalazio arrunta ostalari berdinean exekutatzeko.

note: Type: select Description
en: Method for authenticating PostgreSQL user:
eu: PostgreSQL-eko erabiltzailea autentifikatzeko metodoa:

note: Type: select Description
en: PostgreSQL servers provide several different mechanisms for authenticating connections. Please select what method the database user should use when connecting to the server.
eu: PostgreSQL zerbitzariek hainbat metodo eskaintzen dituzte konexioak autentifikatzeko. Hautatu datu-baseak zerbitzariarekin konektatzean erabiliko duen metodoa.

note: Type: select Description
en: For a standard PostgreSQL installation running on the same host, "password" is recommended, because typically the system username doesn't match the database username.
eu: "pasahitza" gomendatzen da PostgreSQL-ren instalazio arrunta ostalari berdinean exekutatzeko, sistemaren erabiltzaile-izena bat etorri ohi ez delako datu-basearen erabiltzaile-izenarekin.

note: Type: note Description This template is currently unused
en: PostgreSQL connection method error
eu: PostgreSQL-ren konexioaren errore-metodoa

note: Type: note Description This template is currently unused
en: Unfortunately, it seems that the database connection method you have selected for ${pkg} will not work, because it requires the existence of a local user that does not exist.
eu: Zoritxarrez,  badirudi ${pkg}-en datu-basearen konexio-metodoak (zuk hautatutakoa) ez duela funtzionatzen, existitzen ez den lokaleko erabiltzaile bat behar duelako.

note: Type: boolean Description This template is currently unused
en: Change PostgreSQL configuration automatically?
eu: PostgreSQL-ren konfigurazioa automatikoki aldatu?

note: Type: boolean Description This template is currently unused
en: It has been determined that the database installation for ${pkg} cannot be automatically accomplished without making changes to the PostgreSQL server's access controls. It is suggested that this be done by dbconfig-common when the package is installed. If instead you would prefer to do it manually, the following line needs to be added to your pg_hba.conf:
eu: Erabaki denez, ${pkg}-ren datu-basearen instalazioa ezin da automatikoki burutu PostgreSQL zerbitzariaren sarbidetza-kontrolean aldaketa batzuek egin gabe.  Hau 'debconfig-common'-ek egitea gomendatzen da paketea instalatutakoan. Eskuz egitea nahiago baduzu, lerro hauek gehitu beharko dizkiozu zure pg_hba.conf fitxategiari:

note: Type: boolean Description This template is currently unused
en: Revert PostgreSQL configuration automatically?
eu: PostgreSQL-ren konfigurazioa automatikoki leheneratu?

note: Type: boolean Description This template is currently unused
en: As ${pkg} is now being removed, it may no longer be necessary to have an access control entry in the PostgreSQL server's configuration. While keeping such an entry will not break any software on the system, it may be seen as a potential security concern. It is suggested that this be done by dbconfig-common when the package is removed. If instead you would prefer to do it manually, the following line needs to be removed from your pg_hba.conf:
eu: Orain ${pkg} ezabatzen ari denez, aurrerantzean ez da beharrekoz izango PostgreSQL-ren zerbitzariaren konfigurazioan sarbidetza-kontrola edukitzea. Halakoa mantentzeak inolako softwarerik hondatzen ez duen arren, segurtasun arloko arazo gisa ikus daiteke. Hau dbconfig-common tresnak egitea gomendatzen da paketea kentzean. Eskuz egitea nahiago baduzu, lerro hauek gehitu beharko dizkiozu zure pg_hba.conf fitxategiari:

note: Type: note Description This template is currently unused
en: Modifications needed in /etc/postgresql/pg_hba.conf
eu: Aldaketak beharrezkoak fitxategi honetan: /etc/postgresql/pg_hba.conf

note: Type: note Description This template is currently unused
en: To get the database for package ${pkg} bootstrapped you have to edit the configuration of the PostgreSQL server. You may be able to find help in the file /usr/share/doc/${pkg}/README.Debian.
eu: ${pkg} paketearen datu-basea auto-abiarazgarri egiteko, PostgreSQL zerbitzariaren konfigurazioa editatu behar duzu. Laguntza fitxategi honetan aurki dezakezu: /usr/share/doc/${pkg}/README.Debian

note: Type: error Description
en: Empty passwords unsupported with PostgreSQL
eu: Ez dira pasahitz hutsak onartzen PostgreSQL-rekin
