exim4 - en to gl translation catalogue (61 entries)

note: Type: boolean Description
en: Remove undelivered messages in spool directory?
gl: ¿Borrar as mensaxes sen enviar do directorio de traballo?

note: Type: boolean Description
en: There are e-mail messages in the Exim spool directory /var/spool/exim4/input/ which have not yet been delivered. Removing Exim will cause them to remain undelivered until Exim is re-installed.
gl: Hai mensaxes no directorio de traballo de Exim, /var/spool/exim4/input/, que aínda non se entregaron. Se elimina Exim ha facer que queden sen entregar ata que reinstale Exim.

note: Type: boolean Description
en: If this option is not chosen, the spool directory is kept, allowing the messages in the queue to be delivered at a later date after Exim is re-installed.
gl: Se non se escolle esta opción consérvase o directorio de traballo, o que permite que as mensaxes da cola se envíen nunha data posterior despois de reinstalar Exim.

note: Type: error Description
en: Reconfigure exim4-config instead of this package
gl: Reconfigure exim4-config no canto deste paquete

note: Type: error Description
en: Exim4 has its configuration factored out into a dedicated package, exim4-config. To reconfigure Exim4, use 'dpkg-reconfigure exim4-config'.
gl: Exim4 ten a configuración separada nun paquete adicado, exim4-config. Para reconfigurar Exim4, empregue "dpkg-reconfigure exim4-config".

note: Type: select Choices Translators beware! the following six strings form a single Choices menu. - Every one of these strings has to fit in a standard 80 characters console, as the fancy screen setup takes up some space try to keep below ~71 characters. DO NOT USE commas (,) in Choices translations ot
en: internet site; mail is sent and received directly using SMTP
gl: sitio de Internet; o correo envíase e recíbese directamente por SMTP

note: Type: select Choices Translators beware! the following six strings form a single Choices menu. - Every one of these strings has to fit in a standard 80 characters console, as the fancy screen setup takes up some space try to keep below ~71 characters. DO NOT USE commas (,) in Choices translations ot
en: mail sent by smarthost; received via SMTP or fetchmail
gl: o correo envíase por un servidor; recíbese por SMTP ou fetchmail

note: Type: select Choices Translators beware! the following six strings form a single Choices menu. - Every one of these strings has to fit in a standard 80 characters console, as the fancy screen setup takes up some space try to keep below ~71 characters. DO NOT USE commas (,) in Choices translations ot
en: mail sent by smarthost; no local mail
gl: o correo envíase por un servidor; non hai correo local

note: Type: select Choices Translators beware! the following six strings form a single Choices menu. - Every one of these strings has to fit in a standard 80 characters console, as the fancy screen setup takes up some space try to keep below ~71 characters. DO NOT USE commas (,) in Choices translations ot
en: local delivery only; not on a network
gl: só entregas locais; non está nunha rede

note: Type: select Choices Translators beware! the following six strings form a single Choices menu. - Every one of these strings has to fit in a standard 80 characters console, as the fancy screen setup takes up some space try to keep below ~71 characters. DO NOT USE commas (,) in Choices translations ot
en: no configuration at this time
gl: non configurar neste momento

note: Type: select Description
en: General type of mail configuration:
gl: Tipo xeral de configuración do correo:

note: Type: select Description
en: Please select the mail server configuration type that best meets your needs.
gl: Escolla o tipo de configuración do servidor de correo que máis se axuste ás súas necesidades.

note: Type: select Description
en: Systems with dynamic IP addresses, including dialup systems, should generally be configured to send outgoing mail to another machine, called a 'smarthost' for delivery because many receiving systems on the Internet block incoming mail from dynamic IP addresses as spam protection.
gl: Os sistemas con enderezos IP dinámicos, incluíndo os que usan módems, normalmente deberían configurarse para que envíen o seu correo saínte a outra máquina para que esta o entregue, porque moitos sistemas receptores de correo en Internet bloquean, para se protexer do spam, o correo que chega de enderezos IP dinámicos.

note: Type: select Description
en: A system with a dynamic IP address can receive its own mail, or local delivery can be disabled entirely (except mail for root and postmaster).
gl: Un sistema cun enderezo IP dinámico pode recibir o seu propio correo, ou pode desactivarse por completo a entrega local (agás o correo de root e postmaster).

note: Type: boolean Description
en: Really leave the mail system unconfigured?
gl: ¿Quere deixar o sistema de correo sen configurar?

note: Type: boolean Description
en: Until the mail system is configured, it will be broken and cannot be used. Configuration at a later time can be done either by hand or by running 'dpkg-reconfigure exim4-config' as root.
gl: Ata que configure o sistema de correo, este non ha poder funcionar. Pode configuralo máis adiante á man ou executando "dpkg-reconfigure exim4-config" coma administrador.

note: Type: string Description
en: System mail name:
gl: Nome de correo do sistema:

note: Type: string Description
en: The 'mail name' is the domain name used to 'qualify' mail addresses without a domain name.
gl: O "nome de correo" é o nome de dominio que se emprega para completar os enderezos de correo que non teñen un nome de dominio.

note: Type: string Description
en: This name will also be used by other programs. It should be the single, fully qualified domain name (FQDN).
gl: Este nome tamén se ha empregar noutros programas; debería ser o nome de dominio completo (FQDN).

note: Type: string Description
en: Thus, if a mail address on the local host is foo@example.org, the correct value for this option would be example.org.
gl: Por exemplo, se un enderezo de correo no servidor local fose foo@example.org, o valor correcto para esta opción había ser example.org.

note: Type: string Description
en: This name won't appear on From: lines of outgoing messages if rewriting is enabled.
gl: Este nome non ha aparecer nas liñas From: das mensaxes saíntes se activa a rescritura.

note: Type: string Description
en: Other destinations for which mail is accepted:
gl: Outros destinos para os que se acepta correo:

note: Type: string Description
en: Please enter a semicolon-separated list of recipient domains for which this machine should consider itself the final destination. These domains are commonly called 'local domains'. The local hostname (${fqdn}) and 'localhost' are always added to the list given here.
gl: Introduza unha lista de dominios separados por signos de punto e coma (;) para os que esta máquina se debe considerar destinataria final. Estes dominios adoitan chamarse "dominios locais". O nome local (${fqdn}) e "localhost" sempre se engaden á lista de aquí.

note: Type: string Description
en: By default all local domains will be treated identically. If both a.example and b.example are local domains, acc@a.example and acc@b.example will be delivered to the same final destination. If different domain names should be treated differently, it is necessary to edit the config files afterwards.
gl: Por defecto tódolos dominios locais trátanse igual. Se a.exemplo e b.exemplo son dominios locais, as mensaxes dirixidas a acc@a.exemplo e acc@b.exemplo entréganse ao mesmo destino final. Se quere que os dominios diferentes se traten de xeitos diferentes, ha ser necesario editar despois os ficheiros de configuración.

note: Type: string Description
en: Domains to relay mail for:
gl: Dominios para os que se remite correo:

note: Type: string Description
en: Please enter a semicolon-separated list of recipient domains for which this system will relay mail, for example as a fallback MX or mail gateway. This means that this system will accept mail for these domains from anywhere on the Internet and deliver them according to local delivery rules.
gl: Introduza unha lista de dominios separados por signos de punto e coma (;) para os que este sistema ha remitir correo, por exemplo coma MX de respaldo ou pasarela de correo. Isto significa que este sistema ha aceptar correo destinado a eses dominios enviado desde calquera sitio de Internet e entregalo de acordo coas regras de entrega local.

note: Type: string Description
en: Do not mention local domains here. Wildcards may be used.
gl: Non mencione aquí os dominios locais. Pódense empregar comodíns.

note: Type: string Description
en: Machines to relay mail for:
gl: Máquinas para as que se remite correo:

note: Type: string Description
en: Please enter a semicolon-separated list of IP address ranges for which this system will unconditionally relay mail, functioning as a smarthost.
gl: Introduza unha lista de rangos de enderezos IP separados por signos de punto e coma (;) para os que este sistema ha remitir calquera mensaxe de xeito incondicional, funcionando coma servidor de correo.

note: Type: string Description
en: You should use the standard address/prefix format (e.g. 194.222.242.0/24 or 5f03:1200:836f::/48).
gl: Debería empregar o formato estándar de enderezo/prefixo (por exemplo, 194.222.242.0/24 ou 5f03:1200:836f::/48).

note: Type: string Description
en: If this system should not be a smarthost for any other host, leave this list blank.
gl: Se este sistema non debe ser servidor de correo de ningunha outra máquina, deixe esta lista baleira.

note: Type: string Description
en: Visible domain name for local users:
gl: Nome de dominio visible para os usuarios locais:

note: Type: string Description
en: The option to hide the local mail name in outgoing mail was enabled. It is therefore necessary to specify the domain name this system should use for the domain part of local users' sender addresses.
gl: Activouse a opción de ocultar o nome de correo local no correo saínte. Polo tanto, é necesario especificar o nome de dominio que este sistema debe empregar na parte de dominio dos enderezos de envío dos usuarios locais.

note: Type: string Description
en: IP address or host name of the outgoing smarthost:
gl: Enderezo IP ou nome do servidor de correo saínte:

note: Type: string Description
en: Please enter the IP address or the host name of a mail server that this system should use as outgoing smarthost. If the smarthost only accepts your mail on a port different from TCP/25, append two colons and the port number (for example smarthost.example::587 or 192.168.254.254::2525). Colons in IPv6 addresses need to be doubled.
gl: Introduza o enderezo IP ou o nome do servidor de correo que ten que empregar este sistema. Se o servidor só acepta correo nun porto distinto de TCP/25, engada dous signos de dous puntos (::) e o número de porto (por exemplo, servidor.exemplo::587 ou 192.168.254.254::2525). Tamén hai que duplicar os signos de dous puntos dos enderezos IPv6.

note: Type: string Description
en: If the smarthost requires authentication, please refer to the Debian-specific README files in /usr/share/doc/exim4-base for notes about setting up SMTP authentication.
gl: Se o servidor de correo saínte precisa de autenticación, consulte os ficheiros README específicos de Debian no directorio /usr/share/doc/exim4-base para ver notas sobre a configuración da autenticación SMTP.

note: Type: string Description
en: Root and postmaster mail recipient:
gl: Destinatario do correo do administrador e postmaster:

note: Type: string Description
en: Mail for the 'postmaster', 'root', and other system accounts needs to be redirected to the user account of the actual system administrator.
gl: O correo para "postmaster", "root" e outras contas do sistema ten que se redirixir á conta de usuario real do administrador do sistema.

note: Type: string Description
en: If this value is left empty, such mail will be saved in /var/mail/mail, which is not recommended.
gl: Se este valor se deixa baleiro, ese correo hase gravar en /var/mail/mail, o que non se recomenda.

note: Type: string Description
en: Note that postmaster's mail should be read on the system to which it is directed, rather than being forwarded elsewhere, so (at least one of) the users listed here should not redirect their mail off this machine. A 'real-' prefix can be used to force local delivery.
gl: Teña en conta que o correo do postmaster debería lerse no sistema ao que se dirixe, no canto de o redirixir a outro sitio, así que (alomenos un de) os usuarios que escolla non deberían redirixir o seu correo fóra desta máquina. Pode empregar o prefixo "real-" para forzar a entrega local.

note: Type: string Description
en: Multiple user names need to be separated by spaces.
gl: Se indica varios nomes de usuario, sepáreos con espazos.

note: Type: string Description
en: IP-addresses to listen on for incoming SMTP connections:
gl: Enderezo IP no que esperar as conexións SMTP entrantes:

note: Type: string Description
en: Please enter a semicolon-separated list of IP addresses. The Exim SMTP listener daemon will listen on all IP addresses listed here.
gl: Introduza unha lista de enderezos IP separados por signos de punto e coma (;). O servizo de escoita por SMTP de Exim ha escoitar en tódolos enderezos IP desta lista.

note: Type: string Description
en: An empty value will cause Exim to listen for connections on all available network interfaces.
gl: Se deixa este valor en branco, Exim ha esperar conexións en tódolas interfaces de rede dispoñibles.

note: Type: string Description
en: If this system only receives mail directly from local services (and not from other hosts), it is suggested to prohibit external connections to the local Exim daemon. Such services include e-mail programs (MUAs) which talk to localhost only as well as fetchmail. External connections are impossible when 127.0.0.1 is entered here, as this will disable listening on public network interfaces.
gl: Se este sistema só recibe mail directamente de servizos locais (e non doutros servidores), aconséllase que prohiba as conexións externas ao servizo Exim local. Estes servizos inclúen programas de email (MUAs) que só se conectan a localhost, así coma fetchmail. Non son posibles as conexións externas ao introducir 127.0.0.1 aquí, xa que iso desactiva a escoita en interfaces de rede públicas.

note: Type: boolean Description
en: Keep number of DNS-queries minimal (Dial-on-Demand)?
gl: ¿Minimizar o número de consultas DNS?

note: Type: boolean Description
en: In normal mode of operation Exim does DNS lookups at startup, and when receiving or delivering messages. This is for logging purposes and allows keeping down the number of hard-coded values in the configuration.
gl: No modo normal de funcionamento, Exim fai consultas DNS no inicio e cando recibe ou envía mensaxes. Isto faise para fins de rexistro e permite minimizar o número de valores incrustados na configuración.

note: Type: boolean Description
en: If this system does not have a DNS full service resolver available at all times (for example if its Internet access is a dial-up line using dial-on-demand), this might have unwanted consequences. For example, starting up Exim or running the queue (even with no messages waiting) might trigger a costly dial-up-event.
gl: Se este sistema non ten un servizo de resolución DNS completo dispoñible en todo momento (por exemplo, se para se conectar a Internet emprega un módem con chamada baixo demanda), isto pode ter consecuencias non desexadas. Por exemplo, iniciar Exim ou procesar a cola (incluso sen mensaxes agardando) podería causar unha chamada telefónica custosa.

note: Type: boolean Description
en: This option should be selected if this system is using Dial-on-Demand. If it has always-on Internet access, this option should be disabled.
gl: Esta opción deberíase seleccionar se este sistema emprega chamada baixo demanda. Se ten acceso contínuo a Internet debería desactivarse esta opción.

note: Type: title Description
en: Mail Server configuration
gl: Configuración do servidor de correo

note: Type: boolean Description
en: Split configuration into small files?
gl: ¿Partir a configuración en ficheiros pequenos?

note: Type: boolean Description
en: The Debian exim4 packages can either use 'unsplit configuration', a single monolithic file (/etc/exim4/exim4.conf.template) or 'split configuration', where the actual Exim configuration files are built from about 50 smaller files in /etc/exim4/conf.d/.
gl: Os paquetes de Exim4 de Debian poden empregar "configuración contínua", un só ficheiro monolítico (/etc/exim4/exim4.conf.template) ou "configuración partida", na que os ficheiros de configuración de Exim se constrúen a partires duns 50 ficheiros pequenos armacenados en /etc/exim4/conf.d/.

note: Type: boolean Description
en: Unsplit configuration is better suited for large modifications and is generally more stable, whereas split configuration offers a comfortable way to make smaller modifications but is more fragile and might break if modified carelessly.
gl: A configuración contínua axéitase máis a modificacións grandes e adoita ser máis estable, mentres que a configuración partida ofrece un xeito cómodo de facer pequenas modificacións pero é máis fráxil e podería romper se se modifica sen coidado.

note: Type: boolean Description
en: A more detailed discussion of split and unsplit configuration can be found in the Debian-specific README files in /usr/share/doc/exim4-base.
gl: Hai unha discusión máis detallada sobre a configuración partida e contínua nos ficheiros README específicos de Debian de /usr/share/doc/exim4-base.

note: Type: boolean Description
en: Hide local mail name in outgoing mail?
gl: ¿Agochar o nome local no correo de saída?

note: Type: boolean Description
en: The headers of outgoing mail can be rewritten to make it appear to have been generated on a different system. If this option is chosen, '${mailname}', 'localhost' and '${dc_other_hostnames}' in From, Reply-To, Sender and Return-Path are rewritten.
gl: Pódense rescribir as cabeceiras do correo de saída para que pareza que se xerou nun sistema diferente. Se se selecciona esta opción hanse rescribir "${mailname}", "localhost" e "${dc_other_hostnames}" nas cabeceiras From, Reply-To, Sender e Return-Path.

note: Type: select Choices
en: mbox format in /var/mail/
gl: Formato mbox en /var/mail/

note: Type: select Choices
en: Maildir format in home directory
gl: Formato Maildir no directorio do usuario

note: Type: select Description
en: Delivery method for local mail:
gl: Método de entrega para o correo local:

note: Type: select Description
en: Exim is able to store locally delivered email in different formats. The most commonly used ones are mbox and Maildir. mbox uses a single file for the complete mail folder stored in /var/mail/. With Maildir format every single message is stored in a separate file in ~/Maildir/.
gl: Exim pode armacenar o correo que se entrega localmente en varios formatos. Os máis habituais son mbox e Maildir. Mbox emprega un só ficheiro para todo o cartafol de correo armacenado en /var/mail/. Co formato Maildir, cada mensaxe grávase nun ficheiro separado en ~/Maildir/.

note: Type: select Description
en: Please note that most mail tools in Debian expect the local delivery method to be mbox in their default.
gl: Teña en conta que a maioría das ferramentas de correo de Debian esperan que o método de entrega local sexa mbox por defecto.
