GIMP-Help 2.6.0 - en to da translation catalogue (256 entries)

en: To Path
da: Til kurve

en: Selection
da: Markering

en: Transform selection to path
da: Transformér markering til kurve

en: The <guimenuitem>To Path</guimenuitem> command converts a selection into a path. The image does not seem to change, but you can see the new path in the <link linkend="gimp-path-dialog">Paths Dialog</link>. By using the <link linkend="gimp-tool-path">Path tool</link> in the Toolbox, you can precisely adapt the outline of the selection. You can find further information regarding paths in the <link linkend="gimp-path-dialog">Paths Dialog</link> section.
da: Kommandoen <guimenuitem>Til kurve</guimenuitem> konverterer en markering til en kurve. Billedet ser ikke ud til at ændre sig, men du kan se den nye kurve i <link linkend="gimp-path-dialog">dialogen Kurver</link>. Ved at bruge <link linkend="gimp-tool-path">værktøjet Kurver</link> i Værktøjskassen kan du præcist tilpasse  markeringens omrids. Du kan finde flere oplysninger om kurver i afsnittet <link linkend="gimp-path-dialog">Dialogen kurver</link>.

en: Activating the Command
da: Aktivering af kommandoen

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>To Path</guimenuitem></menuchoice>.
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Til kurve</guimenuitem></menuchoice>.

en: You can also access this command from the bottom bar of the <link linkend="gimp-selection-dialog">Selection Editor</link>.
da: Du kan også få adgang til denne kommando i den nederste bjælke i <link linkend="gimp-selection-dialog">Markeringsredigering</link>.

en: You can also access this command from the <link linkend="gimp-path-dialog">Paths Dialog</link> which offers a lot of <link linkend="advanced-settings-for-selection-to-path">Advanced Options</link>.
da: Du kan også få adgang til denne kommando i dialogen <link linkend="gimp-path-dialog">Kurver</link>, som har mange <link linkend="advanced-settings-for-selection-to-path">Avancerede indstillinger</link>.

en: Save to Channel
da: Gem som kanal

en: Save selection to channel
da: Gem markeringen som en kanal

en: The <guimenuitem>Save to Channel</guimenuitem> command saves the selection as a channel. The channel can then be used as a channel selection mask. You can find more information about them in the <link linkend="gimp-channel-dialog">Channels Dialog</link> section.
da: Kommandoen <guimenuitem>Gem som kanal</guimenuitem> gemmer markeringen som en kanal. Kanalen kan derefter bruges som en kanalmarkeringsmaske. Du kan finde flere oplysninger om dem i afsnittet <link linkend="gimp-channel-dialog">Dialogen kanaler</link>.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>Save to Channel</guimenuitem></menuchoice>.
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Gem som kanal</guimenuitem></menuchoice>.

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/shrink.png'; md5=87ad1b1a0e55efbc72eb29c36cc8e951
da: [Strengen bruges ikke]

en: Shrink
da: Formindsk

en: Shrink the size of selection
da: Formindsk markeringens størrelse

en: The <guimenuitem>Shrink</guimenuitem> command reduces the size of the selected area by moving each point on the edge of the selection a certain distance further away from the nearest edge of the image (toward the center of the selection). Feathering is preserved, but the shape of the feathering may be altered at the corners or at points of sharp curvature.
da: Kommandoen <guimenuitem>Formindsk</guimenuitem> reducerer størrelsen på det markerede område ved at flytte hvert punkt på kanten af markeringen en vis afstand væk fra den nærmeste kant af billedet (mod midten af markeringen). Udtyndingen bevares, men formen på udtyndingen kan blive ændret i hjørnerne eller ved punkter med skarp krumning.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>Shrink…</guimenuitem></menuchoice>.
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Formindsk …</guimenuitem></menuchoice>.

en: Description of the <quote>Shrink</quote> dialog
da: Beskrivelse af dialogen <quote>Formindsk</quote>

en: The <quote>Shrink Selection</quote> dialog
da: Dialogen <quote>Formindsk markering</quote>

en: Shrink selection by
da: Formindsk markering med

en: Enter the amount by which to reduce the selection in the text box. The default unit is pixels, but you can choose a different unit of measurement from the drop-down menu.
da: Indtast i tekstfeltet størrelsen, som markeringen skal reduceres med. Standardenheden er pixels, men du kan vælge en anden måleenhed i rullemenuen.

en: Selected areas continue outside the image
da: Markerede områder fortsætter uden for billedet

en: This option is only of interest if the selection runs along the edge of the image. If it does and this option is checked, then the selection shrinks away from the edge of the image. If this option is not checked, the selection continues to extend to the image border. See <xref linkend="selection-outside"/>.
da: Denne indstilling er kun interessant, hvis markeringen løber langs billedets kant. Hvis den gør det, og denne indstilling er afkrydset, formindskes markeringen væk fra billedets kant. Hvis denne indstilling ikke er markeret, fortsætter markeringen med at strække sig til billedets kant. Se <xref linkend="selection-outside"/>.

en: Sharpen
da: Gør skarpere

en: Remove the feathering of border selection
da: Fjern markeringskantens udtynding

en: The <guimenuitem>Sharpen</guimenuitem> command reduces the amount of blur or fuzziness around the edge of a selection. It reverses the effect of the <link linkend="gimp-selection-feather">Feather Selection</link> command. The new edge of the selection follows the dotted line of the edge of the old selection. Anti-aliasing is also removed.
da: Kommandoen <guimenuitem>Gør skarpere</guimenuitem> reducerer mængden af sløring eller uklarhed omkring en markerings kanter. Den vender effekten af kommandoen <link linkend="gimp-selection-feather">Udtynd markering</link>. Markeringens nye kant følger den stiplede linje på kanten af den gamle markering. Kantudjævning fjernes også.

en: Please do not confuse this command with the <link linkend="gimp-filter-unsharp-mask">Sharpen (Unsharp Mask)</link> filter.
da: Denne kommando må ikke forveksles med filteret <link linkend="gimp-filter-unsharp-mask">Gør skarpere (uskarp maske)</link>.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>Sharpen</guimenuitem></menuchoice>.
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Gør skarpere</guimenuitem></menuchoice>.

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/editor.png'; md5=3e151d767d27cd8695037974da30a176
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/stock-icons/gimp-selection-all.svg'; md5=84cd61b241f553ae67e47f4000fa7381
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/stock-icons/gimp-selection-none.svg'; md5=14316d19fd72ee85b79668463029a002
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/stock-icons/gimp-invert.svg'; md5=0e5ed999b06c41d6493ff18c02acc955
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/stock-icons/gimp-selection-to-channel.svg'; md5=b34a15d81718c5d2207e990a889cbf39
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/stock-icons/gimp-selection-to-path.svg'; md5=20984d5c7ad3815897db2f106c3d8a1a
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/stock-icons/gimp-selection-stroke.svg'; md5=dc9d84b3b7e08bc6cdbf73da99ed024a
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/selection-editor-click-example-1.png'; md5=5c0a6f9f25ff770b47901503b094afa1
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/selection-editor-click-example-2.png'; md5=690a401d2006805e0eef2e076b243419
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/selection-to-path-adv.png'; md5=5a5f39c5f5d1c3429365ebee54b7be6f
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/250px-Bezier.png'; md5=9f10efc05741935cd9181ddaccada2c1
da: [Strengen bruges ikke]

en: Selection Editor
da: Markeringsredigering

en: Editor
da: Redigering

en: The <guimenuitem>Selection Editor</guimenuitem> command displays the <quote>Selection Editor</quote> dialog window. This dialog window displays the active selection in the current image and gives you easy access to the selection-related commands. It is not really intended for editing selections directly, but if you are working on a selection, it is handy to have the selection commands all together, since it is easier to click on a button than to search for commands in the command tree of the menubar. The <quote>Selection Editor</quote> also offers some advanced options for the <quote>Select to Path</quote> command.
da: Kommandoen <guimenuitem>Markeringsredigering</guimenuitem> viser dialogvinduet <quote>Markeringsredigering</quote>. Dette dialogvindue viser den aktive markering i det aktuelle billede og giver dig nem adgang til de markeringsrelaterede kommandoer. Det er egentlig ikke beregnet til at redigere markeringer direkte, men hvis du arbejder på en markering, er det praktisk at have markeringskommandoerne samlet, da det er nemmere at klikke på en knap end at søge efter kommandoer i kommandotræet på menulinjen. <quote>Markeringsredigering</quote> tilbyder også nogle avancerede muligheder for kommandoen <quote>Markering til kurve</quote>.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>Selection Editor</guimenuitem></menuchoice>.
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Markeringsredigering</guimenuitem></menuchoice>.

en: Description of the <quote>Selection Editor</quote> dialog window
da: Beskrivelse af dialogvinduet <quote>Markeringsredigering</quote>

en: The <quote>Selection Editor</quote> dialog window
da: Dialogvinduet <quote>Markeringsredigering</quote>

en: The Buttons
da: Knapperne

en: The <quote>Selection Editor</quote> dialog window has several buttons which you can use to easily access selection commands:
da: Dialogvinduet <quote>Markeringsredigering</quote> har flere knapper, som giver nem adgang til markeringskommandoer:

en: <placeholder-1/> The <link linkend="gimp-selection-all">Select All</link> button.
da: <placeholder-1/> Knappen <link linkend="gimp-selection-all">Markér alt</link>.

en: <placeholder-1/> The <link linkend="gimp-selection-none">Select None</link> button.
da: <placeholder-1/> Knappen <link linkend="gimp-selection-none">Markér intet</link>.

en: <placeholder-1/> The <link linkend="gimp-selection-invert">Select Invert</link> button.
da: <placeholder-1/> Knappen <link linkend="gimp-selection-invert">Invertér markeringen</link>.

en: <placeholder-1/> The <link linkend="gimp-selection-to-channel">Save to Channel</link> button.
da: <placeholder-1/> Knappen <link linkend="gimp-selection-to-channel">Gem som kanal</link>.

en: <placeholder-1/> The <link linkend="selection-to-path">To Path</link> button. If you hold the <keycap>Shift</keycap> key while clicking on this button, the <link linkend="advanced-settings-for-selection-to-path">Advanced Settings</link> dialog is displayed. Please see the next section for details about these options.
da: <placeholder-1/> Knappen <link linkend="selection-to-path">Til kurve</link>. Hvis du holder <keycap>Skift</keycap> nede, mens du klikker på denne knap, vises dialogen <link linkend="advanced-settings-for-selection-to-path">Avancerede indstillinger</link>. Se næste afsnit for detaljer om disse indstillinger.

en: <placeholder-1/> The <link linkend="gimp-selection-stroke">Stroke Selection</link> button.
da: <placeholder-1/> Knappen <link linkend="gimp-selection-stroke">Optegn markering</link>.

en: The display window
da: Visningsvinduet

en: In the display window, selected areas of the image are white, non-selected areas are black, and partially selected areas are in shades of gray. Clicking in this window acts like <link linkend="gimp-selection-by_color">Select by Color</link>. See the example below.
da: I visningsvinduet er markerede områder af billedet hvide, ikkemarkerede områder er sorte, og delvist markerede områder er i gråtoner. At klikke i dette vindue fungerer som <link linkend="gimp-selection-by_color">Markering efter farve</link>. Se eksemplet nedenfor.

en: Example of clicking in the <quote>Selection Editor</quote> display window
da: Eksempel på klik i visningsvinduet for <quote>Markeringsredigering</quote>

en: Selection Editor window after clicking.
da: Markeringsredigeringsvinduet efter der er klikket.

en: Image with the resulting selection applied.
da: Billede med den resulterende markering anvendt.

en: <anchor id="plug-in-sel2path"/> The <quote>Selection to Path Advanced Settings</quote> dialog
da: <anchor id="plug-in-sel2path"/> Dialogen <quote>Avancerede indstillinger for markering til kurve</quote>

en: Selection to Path
da: Markering til kurve

en: Advanced options
da: Avancerede indstillinger

en: The <quote>Advanced Settings</quote> dialog window
da: Dialogvinduet <quote>Avancerede indstillinger</quote>

en: The <quote>Selection to Path Advanced Settings</quote> dialog, that you get by <keycap>Shift</keycap> clicking on the <guibutton> Selection to Path</guibutton> button, contains a number of options, most of which you can set with either a slider bar or a text box. There is also one check box. These options are mostly used by advanced users. They are:
da: Dialogen <quote>Avancerede indstillinger for markering til kurve</quote>, som du får ved at klikke på knappen <guibutton>Markering til kurve</guibutton>, mens <keycap>Skift</keycap> holdes nede, indeholder en række indstillinger, hvoraf de fleste kan indstilles med enten en skyder eller en tekstboks. Der er også et afkrydsningsfelt. Disse indstillinger bruges mest af avancerede brugere. De er følgende:

en: <emphasis>Align Threshold</emphasis>: If two endpoints are closer than this value, they are made to be equal.
da: <emphasis>Justeringstærskel</emphasis>: Hvis to endepunkter er tættere på hinanden end denne værdi, bliver de gjort ens.

en: <emphasis>Corner Always Threshold</emphasis>: If the angle defined by a point and its predecessors and successors is smaller than this, it is a corner, even if it is within <emphasis>Corner Surround</emphasis> pixels of a point with a smaller angle.
da: <emphasis>Tærskel for hjørnebestemmelse</emphasis>: Hvis vinklen defineret af et punkt og punkterne før og efter er mindre end dette, er det et hjørne, selvom det er inden for <emphasis>Hjørneomgivelser</emphasis> pixels af et punkt med en mindre vinkel.

en: <emphasis>Corner Surround</emphasis>: Number of points to consider when determining if a point is a corner or not.
da: <emphasis>Hjørneomgivelser</emphasis>: Antal punkter der skal tages i betragtning til afgørelse af, om et punkt er et hjørne eller ej.

en: <emphasis>Corner Threshold</emphasis>: If a point, its predecessors, and its successors define an angle smaller than this, it is a corner.
da: <emphasis>Hjørnetærskel</emphasis>: Hvis et punkt og punkterne før og efter definerer en vinkel, der er mindre end denne, er det et hjørne.

en: <quote>Spline</quote> is a mathematical term for a function which defines a curve by using a series of control points, such as a Bézier curve. <placeholder-1/> See <ulink url="https://en.wikipedia.org/wiki/Spline_(mathematics)">Wikipedia</ulink> for more information.
da: <quote>Spline</quote> er en matematisk betegnelse for en funktion, der definerer en kurve ved hjælp af en række kontrolpunkter som f.eks. en Bézier-kurve. <placeholder-1/> Se <ulink url="https://en.wikipedia.org/wiki/Spline_(mathematics)">Wikipedia</ulink> eller <ulink url="https://lex.dk/splines">Lex</ulink> for flere oplysninger.

en: <emphasis>Error Threshold</emphasis>: Amount of error at which a fitted spline<placeholder-1/> is unacceptable. If any pixel is further away than this from the fitted curve, the algorithm tries again.
da: <emphasis>Fejltærskel</emphasis>: Den afvigelse, hvor en tilpasset spline<placeholder-1/> er uacceptabel. Hvis en pixel er længere væk end dette fra den tilpassede kurve, prøver algoritmen igen.

en: <emphasis>Filter Alternative Surround</emphasis>: A second number of adjacent points to consider when filtering.
da: <emphasis>Alternative omgivelser til filtrering</emphasis>: Et andet sæt af tilstødende punkter der skal tages i betragtning ved filtrering.

en: <emphasis>Filter Epsilon</emphasis>: If the angles between the vectors produced by <emphasis>Filter Surround</emphasis> and <emphasis>Filter Alternative Surround</emphasis> points differ by more than this, use the one from <emphasis>Filter Alternative Surround</emphasis>.
da: <emphasis>Filter-ε</emphasis>: Hvis vinklerne mellem vektorerne produceret af <emphasis>Omgivelser til filtrering</emphasis> og <emphasis>Sekundære omgivelser til filtrering</emphasis> er mere forskellige end dette, skal du bruge den fra <emphasis>Sekundære omgivelser til filtrering</emphasis>.

en: <emphasis>Filter Iteration Count</emphasis>: The number of times to smooth the original data points. Increasing this number dramatically, to 50 or so, can produce vastly better results. But if any points that <quote>should</quote> be corners aren't found, the curve goes wild around that point.
da: <emphasis>Antal gentagelser for filtrering</emphasis>: Antallet af gange de oprindelige datapunkter skal udjævnes. Hvis man øger dette tal dramatisk, til 50 eller deromkring, kan det give langt bedre resultater. Men hvis der ikke findes nogen punkter, som <quote>burde</quote> være hjørner, går kurven amok omkring det punkt.

en: <emphasis>Filter Percent</emphasis>: To produce the new point, use the old point plus this times the neighbors.
da: <emphasis>Filtreringsprocent</emphasis>: Det nye punkt dannes som det gamle plus denne procentværdi gange nabopunkterne.

en: <emphasis>Filter Secondary Surround</emphasis>: Number of adjacent points to consider if <emphasis>Filter Surround</emphasis> points defines a straight line.
da: <emphasis>Sekundære omgivelser til filtrering</emphasis>: Antal tilstødende punkter som skal tages i betragtning, hvis <emphasis>Omgivelser til filtrering</emphasis> definerer en ret linje.

en: <emphasis>Filter Surround</emphasis>: Number of adjacent points to consider when filtering.
da: <emphasis>Omgivelser til filtrering</emphasis>: Antal tilstødende punkter som skal tages i betragtning ved filtrering.

en: <emphasis>Keep Knees</emphasis>: This check box says whether or not to remove <quote>knee</quote> points after finding the outline.
da: <emphasis>Bevar knæ</emphasis>: Dette afkrydsningsfelt styrer, hvorvidt <quote>knæpunkter</quote> skal bevares eller ej, efter omridset er fundet.

en: <emphasis>Line Reversion Threshold</emphasis>: If a spline is closer to a straight line than this value, it remains a straight line, even if it would otherwise be changed back to a curve. This is weighted by the square of the curve length, to make shorter curves more likely to be reverted.
da: <emphasis>Tærskel for tilbageførsel af linje</emphasis>: Hvis en spline er tættere på en ret linje end denne værdi, forbliver det en ret linje, også selvom det ellers ville blive ændret tilbage til en kurve. Vægtes med kvadratet af kurvens længde for at gøre det mere sandsynligt, at korte kurver tilbageføres.

en: <emphasis>Line Threshold</emphasis>: How many pixels (on the average) a spline can diverge from the line determined by its endpoints before it is changed to a straight line.
da: <emphasis>Linjetærskel</emphasis>: Hvor mange pixels (gennemsnitligt) en spline kan afvige fra linjen bestemt ved dens endepunkter, før den ændres til en ret linje.

en: <emphasis>Reparametrize Improvement</emphasis>: If reparameterization doesn't improve the fit by this much percent, the algorithm stops doing it.
da: <emphasis>Forbedring ved omparametrisering</emphasis>: Hvis omparametrisering ikke forbedrer fittet med så mange procent, så lader algoritmen være.

en: <emphasis>Reparametrize Threshold</emphasis>: Amount of error at which it is pointless to reparameterize. This happens, for example, when the algorithm is trying to fit the outline of the outside of an <quote>O</quote> with a single spline. The initial fit is not good enough for the Newton-Raphson iteration to improve it. It may be that it would be better to detect the cases where the algorithm didn't find any corners.
da: <emphasis>Tærskel for omparametrisering</emphasis>: Ved fejl større end dette er det nytteløst at omparametrisere. Dette sker for eksempel, når algoritmen prøver at fitte omridset af ydersiden <quote>O</quote> med en enkelt spline. Det indledende fit er ikke godt nok til, at Newton–Raphson-iteration kan forbedre det. Det kan være, det ville være bedre at opdage tilfældene, hvor algoritmen ikke fandt nogen hjørner.

en: <emphasis>Subdivide Search</emphasis>: Percentage of the curve away from the worst point to look for a better place to subdivide.
da: <emphasis>Søgning efter underinddeling:</emphasis>: Procentdel af kurvens afstand til det værste punkt for at lede efter et bedre sted at underinddele.

en: <emphasis>Subdivide Surround</emphasis>: Number of points to consider when deciding whether a given point is a better place to subdivide.
da: <emphasis>Omgivelser til underinddeling</emphasis>: Antal punkter der skal tages i betragtning, når det skal besluttes, om et givent punkt er et bedre sted at underinddele.

en: <emphasis>Subdivide Threshold</emphasis>: How many pixels a point can diverge from a straight line and still be considered a better place to subdivide.
da: <emphasis>Tærskel for underinddeling</emphasis>: Hvor mange pixels et punkt kan afvige fra en ret linje og stadig blive betragtet som et bedre sted at underinddele.

en: <emphasis>Tangent Surround</emphasis>: Number of points to look at on either side of a point when computing the approximation to the tangent at that point.
da: <emphasis>Omgivelser til tangent</emphasis>: Antal punkter på hver side af et punkt, som bruges til at tilnærme tangenten i punktet.

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/round-rect-01.png'; md5=bb44a50c86768dc015f70c76aaeb087b
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/round-rect-02.png'; md5=e848cf52caf878fb1233e3716b4bcf34
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/rounded-rectangle.png'; md5=092c351a06b10f016cb36c27ce5ccaaa
da: [Strengen bruges ikke]

en: Rounded Rectangle
da: Afrundet rektangel

en: Rounded rectangle
da: Afrundet rektangel

en: Example of using Rounded rectangle on a selection
da: Eksempel på brug af afrundet rektangel på en markering

en: An image with a selection
da: Et billede med en markering

en: After <quote>Rounded rectangle</quote>
da: Efter <quote>Afrundet rektangel</quote>

en: The <quote>Rounded Rectangle</quote> Script-Fu command converts an existing selection (rectangular, elliptical or other shape) into a rectangular selection with rounded corners. The corners can be curved toward the inside (concave) or toward the outside (convex). To do this, the command adds or removes circles at the corners of the selection.
da: Script-Fu-kommandoen <quote>Afrundet rektangel</quote> konverterer en eksisterende markering (rektangulær, elliptisk eller anden form) til en rektangulær markering med afrundede hjørner. Hjørnerne kan være buet mod indersiden (konkav) eller mod ydersiden (konveks). For at gøre dette tilføjer eller fjerner kommandoen cirkler ved markeringens hjørner.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>Rounded Rectangle…</guimenuitem></menuchoice>.
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Afrundet rektangel …</guimenuitem></menuchoice>.

en: Description of the <quote>Rounded Rectangle</quote> Dialog Window
da: Beskrivelse af dialogvinduet <quote>Afrundet rektangel</quote>

en: The <quote>Rounded Rectangle</quote> dialog
da: Dialogen <quote>Afrundet rektangel</quote>

en: You can enter the radius of the rounded corner in percent by using a slider or a text field. This value is a percentage of the height or the width, whichever is less.
da: Du kan angive radius for det afrundede hjørne i procent ved hjælp af en skyder eller et tekstfelt. Denne værdi er en procentdel af højden eller bredden, alt efter hvad der er mindst.

en: Concave
da: Konkav

en: If you check this box, the corners will be concave (curving toward the inside), rather than convex (curving toward the outside).
da: Afkrydses dette felt, vil hjørnerne være konkave (buet mod indersiden) i stedet for konvekse (buet mod ydersiden).

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/remove-holes-ex1.png'; md5=9477566c923a0ef098c7cfcce3fdd22d
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/remove-holes-ex2.png'; md5=abee6011d9b060c737eeee617b3f2420
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/remove-holes-ex3.png'; md5=ab72341c8ec096ecb0436f6d1af1d73f
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/remove-holes-ex4.png'; md5=feb59169a4aab1cf811f5ace9421709d
da: [Strengen bruges ikke]

en: Remove Holes
da: Fjern huller

en: This command removes the holes of a selection. Holes are unselected or partially selected areas in the selection.
da: Denne kommando fjerner hullerne i en markering. Huller er umarkerede eller delvist umarkerede områder i markeringen.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>Remove Holes</guimenuitem></menuchoice>.
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Fjern huller</guimenuitem></menuchoice>.

en: Example for Remove Holes
da: Eksempel på Fjern huller

en: A selection and the Selection Editor
da: En markering og Markeringsredigeringen

en: Selection using the Fuzzy Select tool.
da: En markering foretaget med værktøjet Udflydende markering.

en: The Selection Editor shows several holes.
da: Markeringsredigeringen viser flere huller.

en: Remove Holes applied and the Selection Editor
da: Fjern huller anvendt og Markeringsredigeringen

en: Remove Holes applied.
da: Fjern huller anvendt.

en: Holes disappeared.
da: Hullerne er væk.

en: Toggle Quick Mask
da: Ekspresmaske til/fra

en: This command has the same action as clicking on the small button in the bottom left corner of the image. See <link linkend="gimp-quick-mask">Quick Mask</link>.
da: Denne kommando har samme virkning som at klikke på den lille knap i billedets nederste venstre hjørne. Se <link linkend="gimp-quick-mask">Ekspresmaske</link>.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>Toggle Quick Mask</guimenuitem></menuchoice>.
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Ekspresmaske til/fra</guimenuitem></menuchoice>.

en: None
da: Intet

en: Delete selections
da: Slet markeringer

en: The <guimenuitem>None</guimenuitem> command cancels all selections in the image. If there are no selections, the command doesn't do anything. Floating selections are not affected.
da: Kommandoen <guimenuitem>Intet</guimenuitem> annullerer alle markeringer i billedet. Hvis der ikke er nogen markeringer, gør kommandoen ikke noget. Flydende markeringer påvirkes ikke.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>None</guimenuitem></menuchoice>,
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Intet</guimenuitem></menuchoice>,

en: or by using the keyboard shortcut <keycombo><keycap>Shift</keycap><keycap>Ctrl</keycap><keycap>A</keycap></keycombo>.
da: eller med tastaturgenvejen <keycombo><keycap>Skift</keycap><keycap>Ctrl</keycap><keycap>A</keycap></keycombo>.

en: You can also access this command from the bottom bar of the <link linkend="gimp-selection-dialog">Selection Editor</link>, or through the <link linkend="tab-menus">Tab menu</link> in the <guisubmenu>Selection Editor Menu</guisubmenu>.
da: Du kan også få adgang til denne kommando i den nederste bjælke i <link linkend="gimp-selection-dialog">Markeringsredigering</link> eller gennem <link linkend="tab-menus">fanebladsmenuen</link> i <guisubmenu>Markeringsredigeringsmenuen</guisubmenu>.

en: Invert
da: Invertér

en: Invert selection
da: Invertér markering

en: The <guimenuitem>Invert</guimenuitem> command inverts the selection in the current layer. That means that all of the layer contents which were previously outside of the selection are now inside it, and vice versa. If there was no selection before, the command selects the entire layer.
da: Kommandoen <guimenuitem>Invertér</guimenuitem> inverterer markeringen i det aktuelle lag. Det betyder, at alt lagets indhold, som tidligere var uden for markeringen, nu er inden for den og omvendt. Hvis der ikke var nogen markering før, vælger kommandoen hele laget.

en: Do not confuse this command with the <link linkend="gimp-filter-invert-perceptual">Invert colors</link> command.
da: Forveksl ikke denne kommando med kommandoen <link linkend="gimp-filter-invert-perceptual">Invertér farver</link>.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>Invert</guimenuitem></menuchoice>,
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Invertér</guimenuitem></menuchoice>

en: or by using the keyboard shortcut <keycombo><keycap>Ctrl</keycap><keycap>I</keycap></keycombo>.
da: eller med tastaturgenvejen <keycombo><keycap>Ctrl</keycap><keycap>I</keycap></keycombo>.

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/grow.png'; md5=e9e4bb56a89beb71f1c63d991d7fb4b8
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/grow-at-corners.png'; md5=277cddb04171b7424a733298df39002f
da: [Strengen bruges ikke]

en: Grow
da: Udvid

en: The <guimenuitem>Grow</guimenuitem> command increases the size of a selection in the current image. It works in a similar way to the <link linkend="gimp-selection-shrink">Shrink</link> command, which reduces the size of a selection.
da: Kommandoen <guimenuitem>Udvid</guimenuitem> øger størrelsen på en markering i det aktuelle billede. Den fungerer på samme måde som kommandoen <link linkend="gimp-selection-shrink">Formindsk</link>, der reducerer størrelsen på en markering.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>Grow</guimenuitem></menuchoice>.
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Udvid</guimenuitem></menuchoice>.

en: Description of the <quote>Grow Selection</quote> dialog
da: Beskrivelse af dialogen <quote>Udvid markering</quote>

en: The <quote>Grow Selection</quote> dialog window
da: Dialogvinduet <quote>Udvid markering</quote>

en: Grow selection by
da: Udvid markeringen med

en: You can enter the amount by which to increase the selection in the text box. The default unit of measurement is pixels, but you can choose a different unit by using the drop-down menu.
da: Du kan indtaste, hvor meget markeringen skal øges med, i tekstfeltet. Standardmåleenheden er pixels, men du kan vælge en anden enhed ved at bruge rullemenuen.

en: A Peculiarity of Rectangular Selections
da: En ejendommelighed ved rektangulære markeringer

en: When you grow a rectangular selection, the resulting selection has rounded corners. The reason for this is shown in the image below:
da: Når du udvider en rektangulær markering, har den resulterende markering afrundede hjørner. Grunden til dette er vist på billedet nedenfor:

en: Why growing a rectangular selection results in rounded corners
da: Hvorfor udvidelse af en rektangulær markering resulterer i afrundede hjørner

en: If you do not want rounded corners, you can use the <link linkend="script-fu-selection-rounded-rectangle">Rounded Rectangle</link> command with a 0% radius.
da: Hvis du ikke vil have afrundede hjørner, kan du bruge kommandoen <link linkend="script-fu-selection-rounded-rectangle">Afrundet rektangel</link> med en radius på 0 %.

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/stock-icons/gimp-selection.svg'; md5=037e0db3cd91b6fa7d98ad87dc8896b7
da: [Strengen bruges ikke]

en: Selection From Paths
da: Markering fra kurver

en: Create a selection from Paths
da: Opret en markering fra kurver

en: The <guimenuitem>Selection From Paths</guimenuitem> command transforms the selected paths into a selection. If a path is not closed, the command connects the two end points with a straight line. The original path is unchanged.
da: Kommandoen <guimenuitem>Markering fra kurver</guimenuitem> omdanner de valgte kurver til en markering. Hvis en kurve ikke er lukket, forbinder kommandoen de to endepunkter med en lige linje. Den oprindelige kurve forbliver uændret.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>Selection From Paths</guimenuitem></menuchoice>.
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Markering fra kurver</guimenuitem></menuchoice>.

en: In addition, you can click on the <guibutton>Path to Selection</guibutton> button <placeholder-1/> in the Paths dialog to access the command.
da: Derudover kan du klikke på knappen <placeholder-1/> <guibutton>Kurve til markering</guibutton> i dialogen Kurver for at få adgang til kommandoen.

en: You can also use the keyboard shortcut <keycombo><keycap>Shift</keycap><keycap>V</keycap></keycombo>.
da: Du kan også bruge tastaturgenvejen <keycombo><keycap>Skift</keycap><keycap>V</keycap></keycombo>.

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/stock-icons/gimp-anchor.svg'; md5=103e738c35821502338ebf78eb3ba7ca
da: [Strengen bruges ikke]

en: Float
da: Gør flydende

en: Floating selection (command)
da: Flydende markering (kommando)

en: Cut and Float
da: Klip og flyd

en: Copy and Float
da: Kopiér og flyd

en: The <guimenuitem>Float</guimenuitem> submenu consists of commands to convert a selection into a <quote>floating selection</quote>.
da: Undermenuen <guimenuitem>Flyd</guimenuitem> består af kommandoer til at konvertere en markering til en <quote>flydende markering</quote>.

en: A floating selection (sometimes called a <quote>floating layer</quote>) is a type of temporary layer which is similar in function to a normal layer, except that before you can resume working on any other layers in the image, a floating selection must be <emphasis>anchored</emphasis>. That is, you have to attach it to a normal (non-floating) layer, usually the original layer (the one which was active previously), or turn it into a new layer.
da: En flydende markering (nogle gange kaldet et <quote>flydende lag</quote>) er en type midlertidigt lag, som har samme funktion som et normalt lag, bortset fra at en flydende markering skal være <emphasis>forankret</emphasis>, før du kan fortsætte med at arbejde på andre lag i billedet. Det vil sige, at du skal knytte det til et normalt (ikkeflydende) lag, normalt det oprindelige lag (det der var aktivt tidligere), eller gøre det til et nyt lag.

en: You cannot perform any operations on other layers while the image has a floating selection!
da: Du kan ikke udføre nogen handlinger på andre lag, hvis billedet indeholder en flydende markering!

en: You can use various operations to change the image data on the floating selection. There can only be one floating selection in an image at a time.
da: Du kan bruge forskellige handlinger til at ændre billeddataene i den flydende markering. Der kan kun være én flydende markering i et billede ad gangen.

en: If you display the layer boundary by using the <link linkend="gimp-view-show-layer-boundary">Show Layer Boundary</link> command, you may have difficulty selecting a precise area of the image which you want in a layer. To avoid this problem, you can make a rectangular selection, transform it into a floating selection and anchor it to a new layer. Then simply remove the original layer.
da: Hvis du viser lagets kant ved hjælp af kommandoen <link linkend="gimp-view-show-layer-boundary">Vis lagets kant</link>, kan du have svært ved at vælge et præcist område af billedet, som du vil have i et lag. For at undgå dette problem kan du lave en rektangulær markering, omdanne den til en flydende markering og forankre den til et nyt lag. Derefter skal du blot fjerne det oprindelige lag.

en: Activating the Submenu
da: Aktivering af undermenuen

en: You can access this submenu from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>Float</guimenuitem></menuchoice>.
da: Du kan tilgå denne undermenu i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Flyd</guimenuitem></menuchoice>.

en: Contents of the <quote>Float</quote> submenu
da: Indholdet i undermenuen <quote>Flyd</quote>

en: The <quote>Float</quote> submenu commands are described below.
da: Kommandoerne i undermenuen <quote>Flyd</quote> er beskrevet nedenfor.

en: The <quote>Cut and Float</quote> command cuts the image selection from the layer and converts it into a floating selection.
da: Kommandoen <quote>Klip og flyd</quote> klipper billedmarkeringen ud af laget og konverterer den til en flydende markering.

en: Activating the command
da: Aktivering af kommandoen

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guisubmenu>Float</guisubmenu><guimenuitem>Cut and Float</guimenuitem></menuchoice>.
da: Du kan tilgå kommandoen i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guisubmenu>Flyd</guisubmenu><guimenuitem>Klip og flyd</guimenuitem></menuchoice>.

en: By using the keyboard shortcut <keycombo><keycap>Shift</keycap><keycap>Ctrl</keycap><keycap>L</keycap></keycombo>.
da: Eller med tastaturgenvejen <keycombo><keycap>Skift</keycap><keycap>Ctrl</keycap><keycap>L</keycap></keycombo>.

en: The <quote>Copy and Float</quote> command copies the image selection from the layer and converts it into a floating selection.
da: Kommandoen <quote>Klip og flyd</quote> kopierer billedmarkeringen i laget og konverterer den til en flydende markering.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guisubmenu>Float</guisubmenu><guimenuitem>Copy and Float</guimenuitem></menuchoice>.
da: Du kan tilgå kommandoen i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guisubmenu>Flyd</guisubmenu><guimenuitem>Kopiér og flyd</guimenuitem></menuchoice>.

en: Creating a Floating Selection Automatically
da: Opret automatisk en flydende markering

en: Some image operations create a floating selection automatically:
da: Nogle billedoperationer opretter automatisk en flydende markering:

en: The <quote>paste</quote> operations <link linkend="gimp-buffer-paste">Paste Buffer</link>, <link linkend="gimp-buffer-paste-in-place">Paste Buffer In Place</link>, <link linkend="gimp-buffer-paste-into">Paste Buffer Into The Selection</link>, <link linkend="gimp-buffer-paste-into-in-place">Paste Buffer Into The Selection In Place</link>, <link linkend="gimp-edit-paste-float">Paste as Floating Data</link> or <link linkend="gimp-edit-paste-float-in-place">Paste as Floating Data In Place</link> or <link linkend="gimp-edit-paste-into">Paste as Floating Data Into Selection</link> or <link linkend="gimp-edit-paste-into-in-place">Paste as Floating Data Into Selection In Place</link>, also create a floating selection.
da: <quote>Indsæt</quote>-operationerne <link linkend="gimp-buffer-paste">Indsæt buffer</link>, <link linkend="gimp-buffer-paste-in-place">Indsæt buffer på samme placering</link>, <link linkend="gimp-buffer-paste-into">Indsæt buffer i markeringen</link>, <link linkend="gimp-buffer-paste-into-in-place">Indsæt buffer i markeringen på samme placering</link>, <link linkend="gimp-edit-paste-float">Indsæt som flydende data</link> eller <link linkend="gimp-edit-paste-float-in-place">Indsæt som flydende data på samme placering</link> eller <link linkend="gimp-edit-paste-into">Indsæt i markeringen som flydende data</link> eller <link linkend="gimp-edit-paste-into-in-place">Indsæt på samme placering i markeringen som flydende data</link> opretter også en flydende markering.

en: In addition, all the Transform tools: <link linkend="gimp-tool-unified-transform">Unified Transform</link>, <link linkend="gimp-tool-rotate">Rotate</link>, <link linkend="gimp-tool-scale">Scale</link>, <link linkend="gimp-tool-shear">Shear</link>, <link linkend="gimp-tool-flip">Flip</link>, <link linkend="gimp-tool-perspective">Perspective</link>, <link linkend="gimp-tool-transform-3d">3D Transform</link>, and <link linkend="gimp-tool-handle-transform">Handle Transform</link>, create a floating selection when they are used on a selection, rather than a layer. When the <guilabel>Affect</guilabel> mode is <emphasis>Transform Layer</emphasis> and a selection already exists, these tools transform the selection and create a floating selection with the result. If a selection does not exist, they transform the current layer and do not create a floating selection. (If the <guilabel>Affect</guilabel> mode is <emphasis>Transform Selection</emphasis>, they also do not create a floating selection.)
da: Desuden alle transformationsværktøjerne: <link linkend="gimp-tool-unified-transform">Samlet transformering</link>, <link linkend="gimp-tool-rotate">Rotation</link>, <link linkend="gimp-tool-scale">Skalering</link>, <link linkend="gimp-tool-shear">Vridning</link>, <link linkend="gimp-tool-flip">Vending</link>, <link linkend="gimp-tool-perspective">Perspektiv</link>, <link linkend="gimp-tool-transform-3d">3D-transformering</link> og <link linkend="gimp-tool-handle-transform">Håndtagstransformering</link> opretter en flydende markering, når de bruges på en markering i stedet for et lag. Når <guilabel>Effekt</guilabel>-tilstanden er <emphasis>Transformér lag</emphasis>, og der allerede findes en markering, transformerer disse værktøjer markeringen og skaber en flydende markering med resultatet. Hvis der ikke findes en markering, transformerer de det aktuelle lag og opretter ikke en flydende markering. (Hvis <guilabel>Effekt</guilabel>-tilstanden er <emphasis>Transformér markering</emphasis>, opretter de heller ikke en flydende markering).

en: By click-and-dragging a selection while pressing the <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap></keycombo>, or <keycombo><keycap>Shift</keycap><keycap>Alt</keycap></keycombo> keys (see <xref linkend="gimp-using-selections-moving"/>) you also automatically create a floating selection.
da: Ved at klikke og trække en markering, mens du trykker på <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap></keycombo> eller <keycombo><keycap>Skift</keycap><keycap>Alt</keycap></keycombo> (se <xref linkend="gimp-using-selections-moving"/>), oprettes også automatisk en flydende markering.

en: Anchor a Floating Selection
da: Forankring af en flydende markering

en: You can anchor a floating selection in various ways:
da: Du kan forankre en flydende markering på flere måder:

en: You can anchor the floating selection to the current layer the selection is originating from. To do this, click anywhere on the image except on the floating selection. This merges the floating selection with the current layer.
da: Du kan forankre den flydende markering til det aktuelle lag, som markeringen stammer fra. Det gør du ved at klikke hvor som helst på billedet undtagen på den flydende markering. Dette lægger den flydende markering sammen med det aktuelle lag.

en: Use the <link linkend="gimp-layer-anchor">Anchor layer</link> command (<keycombo><keycap>Ctrl</keycap><keycap>H</keycap></keycombo>).
da: Brug kommandoen <link linkend="gimp-layer-anchor">Forankr lag</link> (<keycombo><keycap>Ctrl</keycap><keycap>H</keycap></keycombo>).

en: By clicking on the anchor button <placeholder-1/> of the <link linkend="gimp-layer-dialog">Layers Dialog</link>, that appears when the floating selection is created, instead of the default Merge layers icon.
da: Ved at klikke på forankringsknappen <placeholder-1/> i <link linkend="gimp-layer-dialog">dialogen Lag</link>, som vises, når den flydende markering oprettes, i stedet for standardikonet Sammenlæg lag.

en: Use the <link linkend="gimp-layer-new">To New Layer</link> command ( <keycombo><keycap>Shift</keycap><keycap>Ctrl</keycap><keycap>N</keycap></keycombo>) to turn the floating selection into a newly created layer.
da: Brug kommandoen <link linkend="gimp-layer-new">Til nyt lag</link> (<keycombo><keycap>Skift</keycap><keycap>Ctrl</keycap><keycap>N</keycap></keycombo>) for at lave den flydende markering til et nyoprettet lag.

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/feather-dialog.png'; md5=aa854cbadbc4253e74b1c499ebcd227e
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/feather-ex-0.png'; md5=305040e781d9744c537e3a133ea4cad2
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/feather-ex-1.png'; md5=92332990795d28d05193b4b618e9d8b6
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/feather-ex-2.png'; md5=fa4f374357798c0f5bc3967dd2ea1893
da: [Strengen bruges ikke]

en: Feather
da: Udtynd

en: Feather selection edges
da: Udtynd markeringskanter

en: The <guimenuitem>Feather</guimenuitem> command feathers the edges of the selection. This creates a smooth transition between the selection and its surroundings. You normally feather selection borders with the <quote>Feather Edges</quote> option of the selection tools, but you may feather them again with this command.
da: Kommandoen <guimenuitem>Udtynd</guimenuitem> udtynder markeringens kanter. Det skaber en jævn overgang mellem markeringen og dens omgivelser. Sædvanligvis udtyndes markeringskanter med <quote>Udtynd kanter</quote> i markeringsværktøjerne, men du kan udtynde dem igen med denne kommando.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>Feather</guimenuitem></menuchoice>.
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Udtynd …</guimenuitem></menuchoice>.

en: Description of the <quote>Feather Selection</quote> dialog window
da: Beskrivelse af dialogvinduet <quote>Udtynd markering</quote>

en: The <quote>Feather Selection</quote> dialog
da: Dialogen <quote>Udtynd markering</quote>

en: Feather selection by
da: Udtynd det markerede over

en: Enter the width of the selection border feathering. The default units are pixels, but you can also choose other units with the drop-down menu.
da: Indtast bredden på markeringskantens udtynding. Standardenhederne er pixels, men du kan også vælge andre enheder i rullemenuen.

en: If the selection is on border of the image (or goes beyond the border), this option acts as if the selected area continued outside the image.
da: Hvis markeringen er på kanten af billedet (eller går ud over kanten), fungerer denne indstilling, som om det markerede område fortsatte uden for billedet.

en: Example
da: Eksempel

en: Original. Selection on border.
da: Oprindelig. Markering på kanten.

en: Option checked. The right border is not feathered.
da: Indstilling afkrydset. Den højre kant er ikke udtyndet.

en: Option unchecked
da: Indstilling ikke afkrydset

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/distort-selection-01.png'; md5=94628eca3e0fe31d897c61557440e65d
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/distort-selection-02.png'; md5=0ad7cfc060bd1b7ecf89450d4877581a
da: [Strengen bruges ikke]

en: Distort
da: Forvræng

en: Distort Selection
da: Forvræng markering

en: Example of using Distort on a selection
da: Eksempel på brug af Forvræng på en markering

en: After <quote>Distort</quote>
da: Efter <quote>Forvræng</quote>

en: The <quote>Distort</quote> command deforms the selection contour.
da: Kommandoen <quote>Forvræng</quote> deformerer markeringens omrids.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>Distort…</guimenuitem></menuchoice>.
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Forvræng …</guimenuitem></menuchoice>.

en: Description of the <quote>Distort</quote> Dialog Window
da: Beskrivelse af dialogvinduet <quote>Forvræng</quote>

en: The <quote>Distort</quote> dialog
da: Dialogen <quote>Forvræng</quote>

en: This command has several options which allow to increase or reduce the deformation. It is not possible to foresee the result and you have to experiment.
da: Denne kommando har flere indstillinger, som gør det muligt at øge eller reducere deformationen. Det er ikke muligt at forudse resultatet, og man er nødt til at eksperimentere.

en: Threshold
da: Tærskel

en: A higher threshold shrinks the distorted selection. A lower threshold makes the selection bigger.
da: En højere tærskel gør den forvrængede markering mindre. En lavere tærskel gør markeringen større.

en: If the active selection has a regular shape (e.g. rectangle or ellipse selection), this option controls if the new outline is more inside the original selection or more outside the original selection.
da: Hvis den aktive markering har en regelmæssig form (f.eks. rektangel- eller ellipsemarkering), styrer denne indstilling, om det nye omrids er mere inden for den oprindelige markering eller mere uden for den oprindelige markering.

en: Spread
da: Spredning

en: A higher <quote>Spread</quote> increases the deformation.
da: En større <quote>Spredning</quote> øger deformationen.

en: Granularity
da: Kornethed

en: A higher <quote>Granularity</quote> increases the deformation.
da: En større <quote>Kornethed</quote> øger deformationen.

en: Smooth
da: Udglat

en: A higher <quote>Smooth</quote> decreases the deformation.
da: En større <quote>Udglatning</quote> øger deformationen.

en: Deactivating <guilabel>Smooth horizontally</guilabel> or <guilabel>Smooth vertically</guilabel> increases the deformation.
da: Deaktivering af <guilabel>Udglat vandret</guilabel> eller <guilabel>Udglat lodret</guilabel> øger deformationen.

en: By Color
da: Efter farve

en: By Color select
da: Markering efter farve

en: The <guimenuitem>By Color</guimenuitem> command is an alternate way of accessing the <quote>Select By Color</quote> tool, one of the basic selection tools. You can find more information about using this tool in <link linkend="gimp-tool-by-color-select">Select By Color</link>.
da: Kommandoen <guimenuitem>Efter farve</guimenuitem> er en alternativ måde at få adgang til værktøjet <quote>Markering efter farve</quote>, som er et af de grundlæggende markeringsværktøjer. Du kan finde flere oplysninger om brug af dette værktøj i <link linkend="gimp-tool-by-color-select">Markering efter farve</link>.

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/border-selection-01.png'; md5=433da1e2971e694bcfcfeb0d2bfa5454
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/border-selection-02.png'; md5=5e67776ff38132ae80a626bae244b627
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/border.png'; md5=2e712fd32ab1f3133dad4cf207b67f10
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/border-hard.png'; md5=9804ef41144d66ac5dfbe1006f853103
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/border-smooth.png'; md5=b3b66ff6f6eefe315c9a0a2a0d8fe001
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/border-feathered.png'; md5=8a7d79708d855754adc9c7319802d740
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/border-selection-lock1.png'; md5=64edcfa57dd31046b4cc02211e21e00c
da: [Strengen bruges ikke]

note: When image changes, this message will be marked fuzzy or untranslated for you. It doesn't matter what you translate it to: it's not used at all.
en: @@image: 'images/menus/select/border-selection-lock2.png'; md5=1eb066378a3e3bd312536e3b96d65c71
da: [Strengen bruges ikke]

en: Border
da: Indram

en: Create a selection border
da: Opret en markeringsramme

en: Example of creating a border from a selection
da: Eksempel på oprettelse af en ramme ud fra en markering

en: After <quote>Select Border</quote>
da: Efter <quote>Indram</quote>

en: The <guimenuitem>Select Border</guimenuitem> command creates a new selection along the edge of an existing selection in the current image. The edge of the current selection is used as a form and the new selection is then created around it. You enter the width of the border, in pixels or some other unit, in the dialog window. Half of the new border lies inside of the selected area and half outside of it.
da: Kommandoen <guimenuitem>Indram</guimenuitem> opretter en ny markering langs kanten af en eksisterende markering i det aktuelle billede. Kanten af den aktuelle markering bruges som en form, og den nye markering oprettes derefter omkring den. Du indtaster bredden på kanten i pixels eller en anden enhed i dialogvinduet. Halvdelen af den nye kant ligger inden for det valgte område og halvdelen uden for det.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>Border…</guimenuitem></menuchoice>.
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Indram …</guimenuitem></menuchoice>.

en: If there is no selection, this menu entry is disabled.
da: Er der ikke nogen markering, er menupunktet deaktiveret.

en: The image must have an alpha channel.
da: Billedet skal have en alfakanal.

note: </sect3> <sect3> <note>
en: Two conditions must be respected to use this command: <placeholder-1/>
da: To betingelser skal være opfyldt, for at kommandoen kan bruges: <placeholder-1/>

en: Description of the <quote>Border</quote> dialog window
da: Beskrivelse af dialogvinduet <quote>Indram markering</quote>

en: The <quote>Border</quote> dialog window
da: Dialogvinduet <quote>Indram markering</quote>

en: Border selection by
da: Indram det markerede med

en: Enter the width of the border selection in the box. The default units are pixels, but you can also choose the units with the drop-down menu.
da: Indtast bredden på den indrammede markering i feltet. Standardenhederne er pixels, men du kan også vælge enhederne i rullemenuen.

en: Border Style
da: Kantstil

en: <emphasis role="bold">Hard</emphasis>: this option does not keep antialiasing. This can be useful in some cases.
da: <emphasis role="bold">Hård</emphasis>: Denne indstilling bevarer ikke kantudjævning. Det kan være nyttigt i nogle tilfælde.

en: <emphasis role="bold">Feathered</emphasis>: this option does the same things as <quote>Hard</quote>, but instead of the resulting border being fully selected, it fades outwards. The result is not very good; if you want a feathered border, better is use one of the other modes, and then feather the result. It's there for history reason.
da: <emphasis role="bold">Udtyndet</emphasis>: Denne indstilling gør det samme som <quote>Hård</quote>, men i stedet for at den resulterende kant er fuldt markeret, fader den udad. Resultatet er ikke særlig godt; hvis du vil have en udtyndet kant, er det bedre at bruge en af de andre tilstande og så gøre resultatet mere udtyndet. Den er der af historiske årsager.

en: Border Style Comparison
da: Sammenligning af indramningsstile

en: <quote>Hard</quote> option. Selection editor, zoom 800%
da: Indstillingen <quote>Hård</quote>. Markeringsredigering zoomet til 800 %

en: <quote>Smooth</quote> option. Selection editor, zoom 800%
da: Indstillingen <quote>Blød</quote>. Markeringsredigering zoomet til 800 %

en: <quote>Feathered</quote> option. Selection editor, zoom 800%
da: Indstillingen <quote>Udtyndet</quote>. Markeringsredigering zoomet til 800 %

en: With this option enabled, an edge of an (usually rectangle) selection remains unchanged if it is aligned with an edge of the image; no new selection will be created around it.
da: Når denne indstilling er aktiveret, forbliver en kant af en markering (normalt et rektangel) uændret, hvis den er på linje med en kant af billedet; der oprettes ikke en ny markering omkring den.

en: Select border with and without <quote>Selected areas continue outside the image</quote>
da: Indramningsmarkering med og uden <quote>Markerede områder fortsætter uden for billedet</quote>

en: Select border without (middle) and with (right) locked selection.
da: Indramningsmarkering uden (i midten) og med (til højre) låst markering.

en: Same selections filled with red.
da: Samme markeringer udfyldt med rød farve.

en: Select All
da: Markér alt

en: The <guimenuitem>Select All</guimenuitem> command creates a new selection which contains everything on the current layer.
da: Kommandoen <guimenuitem>Markér alt</guimenuitem> opretter en ny markering, som indeholder alt i det aktuelle lag.

en: You can access this command from the main menu through <menuchoice><guimenu>Select</guimenu><guimenuitem>All</guimenuitem></menuchoice>,
da: Du kan tilgå denne kommando i hovedmenuen via <menuchoice><guimenu>Markering</guimenu><guimenuitem>Alt</guimenuitem></menuchoice>

en: or by using the keyboard shortcut <keycombo><keycap>Ctrl</keycap><keycap>A</keycap></keycombo>.
da: eller med tastaturgenvejen <keycombo><keycap>Ctrl</keycap><keycap>A</keycap></keycombo>.
