gnome-disc-utility - en to bs translation catalogue (600 entries)

en: Disk Image Mounter
bs: Priključivač odraza diska

en: Mount Disk Images
bs: Prikačite odraze diska

en: Disk Image Writer
bs: Pisač slike diska

en: Write Disk Images to Devices
bs: Piši slike diska na uređajima

en: Disks
bs: Diskovi

en: Manage Drives and Media
bs: Upravljanje diskovima i medijumima

en: disk;drive;volume;harddisk;hdd;disc;cdrom;dvd;partition;iso;image;backup;restore;benchmark;raid;luks;encryption;S.M.A.R.T.;smart;
bs: disk;uređaj;volumen;čvrsti disk;hdd;cd-rom;cdrom;dvd;particija;iso;otisak;slika;rezerva;obnova;probni test;raid;luks;šifrovanje;S.M.A.R.T.;smart;

en: Default location for the Create/Restore disk image dialogs
bs: Podrazumijevano mjesto prozorčića za kreiranje i vraćanje odraza diska.

en: Default location for the Create/Restore disk image dialogs. If blank the ~/Documents folder is used.
bs: Podrazumijevano mjesto prozorčića za kreiranje i vraćanje odraza diska. Ako je prazno koristi se fascikla „~/Dokumenti“.

en: Activation of this plugin
bs: Aktivacija ovog dodatka

en: Whether this plugin would be activated by gnome-settings-daemon or not
bs: Da li će ovaj dodatak biti aktiviran pozadinskim programom podešavanja gnoma ili ne

en: Priority to use for this plugin
bs: Prioritet koji će biti korišćen za ovaj dodatak

en: Priority to use for this plugin in gnome-settings-daemon startup queue
bs: Prioritet koji će biti korišćen za ovaj dodatak u redu za pokretanje u pozadinskom programu podešavanja gnoma

en: An error occurred
bs: Došlo je do greške

en: Allow writing to the image
bs: Dopusti pisanje na odrazu

en: Select Disk Image(s) to Mount
bs: Odaberi odraz diska za priključivanje

en: _Cancel
bs: _Obustavi

en: _Mount
bs: _Montiraj

note: Add a RO check button that defaults to RO
en: Set up _read-only mount
bs: Postavi samo-za-čitanje priključivanje

en: If checked, the mount will be read-only. This is useful if you don't want the underlying disk image to be modified
bs: Ako je provjereno, priključivač će biti samo-za-čitanje. Ovo je korisno ako ne želite da osnovni odraz diska bude promijenjen

en: Error connecting to udisks daemon: %s (%s, %d)
bs: Greška pri povezivanju s udisks daemon: %s (%s, %d)

en: Attach and mount one or more disk image files.
bs: Dodaj i priključi jednu ili više datoteka odraza diska.

en: Cannot open `%s' - maybe the volume isn't mounted?
bs: Ne mogu otvoriti `%s' - možda sadržaj nije montiran?

en: Error opening `%s': %m
bs: Greška pri otvaranju `%s': %m

en: Error attaching disk image: %s (%s, %d)
bs: Greška pri dodavanju odraza diska: %s (%s, %d)

en: Error opening %s: %s
bs: Greška prilikom otvaranja %s: %s

en: Error looking up block device for %s
bs: Greška u traženju blok uređaja %s

en: Select device
bs: Odaberite uređaj

en: Format selected device
bs: Formatiraj izabrani uređaj

en: Parent window XID for the format dialog
bs: XID roditeljskog prozora za prozorčić formatiranja

en: Restore disk image
bs: Obnova slike diska

en: Show help options
bs: Prikaži opcije za pomoć

en: --format-device must be used together with --block-device
bs: „--format-device“ mora da se koristi sa „--block-device“

en: --format-device must be specified when using --xid
bs: „--format-device“ mora biti navedeno kada se koristi „--xid“

note: Translators: Shown in the About dialog to convey version numbers. *              The first %s is the version of Disks (for example "3.6"). *              The second %s is the version of the running udisks daemon (for example "2.0.90"). *              The third, fourth and fifth %d are the major, min
en: gnome-disk-utility %s
    UDisks %s (built against %d.%d.%d)
bs: gnomov alat za diskove %s
    UDisks %s (izgrađen sa %d.%d.%d)

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Read Error Rate
bs: Stopa grešaka pri čitanju

en: Frequency of errors while reading raw data from the disk. A non-zero value indicates a problem with either the disk surface or read/write heads
bs: Učestanost grešaka u toku čitanja podataka s diska. Vrijednosti različite od nule znače da je došlo do oštećenja površine diska ili glave za upis/čitanje

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Throughput Performance
bs: Propusna moć

en: Average efficiency of the disk
bs: Srednja efikasnost diska

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Spinup Time
bs: Vrijeme zavrtaja

en: Time needed to spin up the disk
bs: Vrijeme koje je potrebno za zavrtaj diska

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Start/Stop Count
bs: Broj pokretanja/zaustavljanja

en: Number of spindle start/stop cycles
bs: Broj započetih/završenih ciklusa osovine

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Reallocated Sector Count
bs: Broj prerezervisanih sektora

en: Count of remapped sectors. When the hard drive finds a read/write/verification error, it marks the sector as “reallocated” and transfers data to a special reserved area (spare area)
bs: Broj sektora koji su iznova mapirani. Kada tvrdi disk nađe grešku pri čitanju/pisanju/provjeri, on označava sektor kao „premješten“ i prenosi podatke u specijalno ostavljen prostor (rezervni prostor)

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Read Channel Margin
bs: Ivica kanala čitanja

en: Margin of a channel while reading data.
bs: Ivica kanala u toku čitanja podataka.

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Seek Error Rate
bs: Stopa grešaka u pretraživanju

en: Frequency of errors while positioning
bs: Učestanost grešaka u toku pozicioniranja

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Seek Timer Performance
bs: Vremenski učinak pretraživanja

en: Average efficiency of operations while positioning
bs: Srednja vrijednost efikasnosti operacija pri pozicioniranju

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Power-On Hours
bs: Časova rada

en: Number of hours elapsed in the power-on state
bs: Broj sati za koje je disk bio uključen

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Spinup Retry Count
bs: Broj pokušaja zavrtaja

en: Number of retry attempts to spin up
bs: Broj pokušaja da zavrti disk

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Calibration Retry Count
bs: Broj pokušaja kalibracije

en: Number of attempts to calibrate the device
bs: Broj pokušaja za kalibraciju uređaja

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Power Cycle Count
bs: Broj uključivanja

en: Number of power-on events
bs: Broj uključivanja/isključivanja diska

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Soft read error rate
bs: Stopa grešaka pri mekom čitanju

en: Frequency of errors while reading from the disk
bs: Učestalost grešaka pri čitanju s diska

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Reported Uncorrectable Errors
bs: Nepopravljive greške

en: Number of errors that could not be recovered using hardware ECC
bs: Broj grešaka koje ne mogu biti popravljene pomoću ECC-a iz uređaja

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: High Fly Writes
bs: Glava van putanje

en: Number of times a recording head is flying outside its normal operating range
bs: Broj upisivanja kada je glava za upis bila izvan njene normalne putanje

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Airflow Temperature
bs: Temperatura vazduha

en: Airflow temperature of the drive
bs: Temperatura vazduha koji cirkuliše unutar uređaja

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: G-sense Error Rate
bs: Učestalost G-sens grešaka

en: Frequency of mistakes as a result of impact loads
bs: Učestanost grešaka koje su posljedica sudarnih učitavanja

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Power-off Retract Count
bs: Broj isključivanja i povlačenja

en: Number of power-off or emergency retract cycles
bs: Broj isključivanja ili hitno povučenih ciklusa

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Load/Unload Cycle Count
bs: Broj cijelih ciklusa

en: Number of cycles into landing zone position
bs: Broj ciklusa na osnovu povlačenja glave u početan položaj

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Temperature
bs: Temperatura

en: Current internal temperature of the drive
bs: Trenutna temperatura unutar uređaja

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Hardware ECC Recovered
bs: Povraćeni ECC uređaja

en: Number of ECC on-the-fly errors
bs: Broj ECC grešaka u toku rada

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Reallocation Count
bs: Broj prerezervacija

en: Number of remapping operations. The raw value of this attribute shows the total number of (successful and unsuccessful) attempts to transfer data from reallocated sectors to a spare area
bs: Broj remapiranja. Izvorna vrijednost ove osobine pokazuje ukupan broj (uspješnih i neuspješnih) pokušaja prijenosa podataka iz prerezervisanih sektora u specijalno ostavljen prostor

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Current Pending Sector Count
bs: Broj sektora na čekanju

en: Number of sectors waiting to be remapped. If the sector waiting to be remapped is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on the sector will not remap the sector, it will only be remapped on a failed write attempt
bs: Broj sektora koji čekaju remapiranje. Ukoliko je sektor koji čeka remapiranje bude kasnije uspješno upisan ili ispravno pročitan, ova vrijednost se smanjuje, a sektor se ne remapira. Greške pri čitanju sektora neće remapirati sektore, već će ih remapirati samo pri neuspjelom pokušaju upisa.

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Uncorrectable Sector Count
bs: Broj nepopravljivih sektora

en: The total number of uncorrectable errors when reading/writing a sector. A rise in the value of this attribute indicates defects of the disk surface and/or problems in the mechanical subsystem
bs: Ukupan broj grešaka tokom čitanja/upisa sektora, koje se ne mogu ispraviti. Povećanje ove vrijednosti ukazuje na oštećenje površine diska i/ili problema u njegovim mehaničkim dijelovima

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: UDMA CRC Error Rate
bs: Stopa UDMA CRC grešaka

en: Number of CRC errors during UDMA mode
bs: Stopa CRC grešaka u UDMA režimu

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Write Error Rate
bs: Greške pri upisu

en: Number of errors while writing to disk (or) multi-zone error rate (or) flying-height
bs: Broj grešaka prilikom upisa na disk (ili) stopa oštećenja na više mjesta (ili) promjena visine glave za upis

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Soft Read Error Rate
bs: Stopa blagih grešaka u čitanju

en: Number of off-track errors
bs: Broj grešaka van staze

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Data Address Mark Errors
bs: Greške u oznaci adrese podataka

en: Number of Data Address Mark (DAM) errors (or) vendor-specific
bs: Broj grešaka u oznaci adrese podataka (DAM)

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Run Out Cancel
bs: Prekid izlaska

en: Number of ECC errors
bs: Broj ECC grešaka

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Soft ECC correction
bs: Blage ECC popravke

en: Number of errors corrected by software ECC
bs: Broj grešaka koje je popravio ECC program

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Thermal Asperity Rate
bs: Stopa termičkih grešaka

en: Number of Thermal Asperity Rate errors
bs: Broj grešaka zbog loših temperaturnih uslova

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Flying Height
bs: Visina glava

en: Height of heads above the disk surface
bs: Visina glava iznad površine diska

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Spin High Current
bs: Struja zaokreta

en: Amount of high current used to spin up the drive
bs: Količina struje koja se koristi da se pokrene uređaj

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Spin Buzz
bs: Zujanje zaokreta

en: Number of buzz routines to spin up the drive
bs: Količina zujanja koja se koristi za pokretanje uređaja

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Offline Seek Performance
bs: Pretraga dok disk ne radi

en: Drive’s seek performance during offline operations
bs: Učinak pretrage podataka kada disk ne radi

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Disk Shift
bs: Istumban disk

en: Shift of disk is possible as a result of strong shock loading in the store, as a result of falling (or) temperature
bs: Dijelovi diska su pomjereni iz ležišta, što može biti posljedica tumbanja prilikom transporta, pada ili ekstremne temperature

en: Number of errors as a result of impact loads as detected by a shock sensor
bs: Senzor šoka je otkrio brojne greške koje su posljedica udarca

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Loaded Hours
bs: Časova rada

en: Number of hours in general operational state
bs: Broj sati kada je disk radio

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Load/Unload Retry Count
bs: Broj pokušaja učitavanja

en: Loading on drive caused by numerous recurrences of operations, like reading, recording, positioning of heads, etc
bs: Učitavanje sa uređaja može da se desi zbog brojnih periodičnih radnju, kao što su čitanje i upisivanje, postavljanje glave na pravu putanju i slično

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Load Friction
bs: Trenje pri čitanju

en: Load on drive caused by friction in mechanical parts of the store
bs: Loše čitanje podataka sa uređaja izazvano trenjem u mehaničkim dijelovima diska

en: Total number of load cycles
bs: Ukupan broj ciklusa učitavanja

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Load-in Time
bs: Vrijeme učitavanja

en: General time for loading in a drive
bs: Ukupno vrijeme za učitavanje uređaja

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Torque Amplification Count
bs: Broj pojačanih uvrtanja

en: Quantity efforts of the rotating moment of a drive
bs: Broj pokušaja rotacionog momenta uređaja

en: Number of power-off retract events
bs: Broj vraćanja glave pri gašenju

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: GMR Head Amplitude
bs: Amplituda podrhtavanja glave

en: Amplitude of heads trembling (GMR-head) in running mode
bs: Amplituda pogrhtavanja glava (GMR-glave) u toku rada

en: Temperature of the drive
bs: Temperatura uređaja

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Endurance Remaining
bs: Preostala izdržljivost

en: Number of physical erase cycles completed on the drive as a percentage of the maximum physical erase cycles the drive supports
bs: Broj završenih fizičkih ciklusa brisanja uređaja, kao procenat maksimalnog broja fizičkih ciklusa brisanja koje podržava uređaj

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Uncorrectable ECC Count
bs: Broj neupisivih ECC-a

en: Number of uncorrectable ECC errors
bs: Broj ECC greški koje se ne mogu ispraviti

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Good Block Rate
bs: Broj dobrih blokova

en: Number of available reserved blocks as a percentage of the total number of reserved blocks
bs: Broj postojećih rezervisanih blokova, kao procenat od ukupnog broja rezervisanih blokova

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Head Flying Hours
bs: Vrijeme lebdenja glave

en: Time while head is positioning
bs: Vrijeme za koje se glava pozicionira na disk

note: Translators: SMART attribute, seje http://smartmontools.sourceforge.net/doc.html * or the next string for a longer explanation.
en: Read Error Retry Rate
bs: Stopa grešaka u čitanju

en: Number of errors while reading from a disk
bs: Broj grešaka u toku čitanja podataka sa diska

en: No description for attribute %d
bs: Ne postoji opis za „%d“ osobinu

note: Translators: Shown in the treeview for a failing attribute
en: FAILING
bs: OTKAZUJE

note: Translators: Shown in the treeview for an attribute that failed in the past
en: Failed in the past
bs: Otkazivao u prošlosti

en: OK
bs: U redu

en: %d sector | %d sectors
bs[0]: %d sektor
bs[1]: %d sektora
bs[2]: %d sektora

note: SK_SMART_ATTRIBUTE_UNIT_UNKNOWN Translators: Used in the treeview for the pretty/interpreted value of an attribute * where the value cannot bje interpreted Translators: Shown for normalized values (current, worst, threshold) if the value is * not applicable, e.g. meaningless. Seje http://en.wikipedi
en: N/A
bs: Nedostupno

[ctx: smart-self-test-result]
en: Last self-test completed successfully
bs: Posljednje samotestiranje uspješno završeno

[ctx: smart-self-test-result]
en: Last self-test was aborted
bs: Posljednje samotestiranje neuspjelo

[ctx: smart-self-test-result]
en: Last self-test was interrupted
bs: Posljednje samotestiranje prekinuto

[ctx: smart-self-test-result]
en: Last self-test did not complete
bs: Posljednje samotestiranje se nije dovršilo

[ctx: smart-self-test-result]
en: Last self-test failed
bs: Posljednje samotestiranje nije uspjelo

[ctx: smart-self-test-result]
note: Translators: shown when the last self-test failed and the problem is with the electrical subsystem
en: Last self-test failed (electrical)
bs: Posljednje samotestiranje nije uspjelo (problem s električnim podsistemom)

[ctx: smart-self-test-result]
note: Translators: shown when the last self-test failed and the problem is with the servo subsystem - seje http://en.wikipedia.org/wiki/Servomechanism
en: Last self-test failed (servo)
bs: Posljednje samotestiranje nije uspjelo (problem sa servo podsistemom)

[ctx: smart-self-test-result]
note: Translators: shown when the last self-test failed and the problem is with the reading subsystem -
en: Last self-test failed (read)
bs: Posljednje samotestiranje nije uspjelo (problem s podsistemom za čitanje)

[ctx: smart-self-test-result]
note: Translators: shown when the last self-test failed and the disk is suspected of having handling damage (e.g. physical damage to the hard disk)
en: Last self-test failed (handling)
bs: Posljednje samotestiranje nije uspjelo (greška pri rukovanju sa sistemom)

[ctx: smart-self-test-result]
note: Translators: shown when a self-test is in progress. The first %d is the percentage of the test remaining.
en: Self-test in progress — %d%% remaining
bs: Samotestiranje u toku - %d%% preostalo

[ctx: smart-self-test-result]
note: Translators: Shown when a self-test is not unknown. The %s is the result-code from the API code.
en: Unknown (%s)
bs: Nepoznato (%s)

en: %s ago
bs: Prije %s

en: SMART is not supported
bs: SMART nije podržan

en: SMART is not enabled
bs: SMART nije omogućen

en: Self-test in progress
bs: Samotestiranje u toku

en: DISK IS LIKELY TO FAIL SOON
bs: DISK ĆE VJEROVATNO PODBACITI USKORO

en: SELF-TEST FAILED
bs: SAMOTESTIRANJE NIJE USPJELO

en: Disk is OK, one failing attribute is failing | Disk is OK, %d attributes are failing
bs[0]: Disk je u redu, %d neuspjeli atribut pada
bs[1]: Disk je u redu, %d atributa padaju
bs[2]: Disk je u redu, %d atributa padaju

en: Disk is OK, one bad sector | Disk is OK, %d bad sectors
bs[0]: Disk je uredu, %d loš sektor
bs[1]: Disk je u redu, %d loša sektora
bs[2]: Disk je u redu, %d loših sektora

en: Disk is OK, one attribute failed in the past | Disk is OK, %d attributes failed in the past
bs[0]: Disk je uredu, %d atribut je već pao
bs[1]: Disk je uredu, %d atributa su već pala
bs[2]: Disk je uredu, %d atributa je već palo

note: Otherwise, it's all honky dory
en: Disk is OK
bs: Disk je u redu

en: Pre-Fail
bs: Pred kvarom

en: Old-Age
bs: Ostario

en: Online
bs: Povezan

en: Offline
bs: Isključen

note: Translators: XXX
en: Threshold exceeded
bs: Prag je prekoračen

note: Translators: XXX
en: Threshold not exceeded
bs: Prag nije prekoračen

en: Error refreshing SMART data
bs: Greška pri osvježivanju SMART podataka

en: Error aborting SMART self-test
bs: Greška pri prekidanju SMART samotestiranja

en: Error starting SMART self-test
bs: Greška pri pokretanju SMART samotestiranja

en: An error occurred when trying to toggle whether SMART is enabled
bs: Desila se greška pri provjeri da li je SMART uključen

note: Translators: This string is used as the column title in the treeview for the attribute nami and description
en: Attribute
bs: Osobina

note: Translators: This string is used as the column title in the treeview for the value
en: Value
bs: Vrijednost

note: Translators: This string is used as the column title in the treeview for the normalized value
en: Normalized
bs: Normalizovano

note: Translators: This string is used as the column title in the treeview for the threshold value
en: Threshold
bs: Prag

note: Translators: This string is used as the column title in the treeview for the worst value
en: Worst
bs: Najgore

note: Translators: This string is used as the column title in the treeview for the type
en: Type
bs: Vrsta

note: Translators: This string is used as the column title in the treeview for the update type (Online / Offline)
en: Updates
bs: Nadogradnje

note: Translators: This string is used as the column title in the treeview for the assessment of the attribute
en: Assessment
bs: Procjena

en: %d sample | %d samples
bs[0]: %d uzorak
bs[1]: %d uzorka
bs[2]: %d uzoraka

[ctx: benchmark-updated]
note: Translators: The first %s is the date and time the benchmark took place in the preferred * format for the locale (e.g. "%c" for strftime()/g_date_time_format()), for example * "Tue 12 Jun 2012 03:57:08 PM EDT". The second %s is how long ago that is from right * now, for example "3 days" or "2 hours"
en: %s (%s ago)
bs: %s (prije %s)

[ctx: benchmark-updated]
en: No benchmark data available
bs: Informacije o mogućnosti računara nisu dostupne

[ctx: benchmark-updated]
en: Opening Device…
bs: Otvaram uređaj…

[ctx: benchmark-updated]
en: Measuring transfer rate (%2.1f%% complete)…
bs: Mjerim stopu prijenosa (obavljeno je %2.1f%%)…

[ctx: benchmark-updated]
en: Measuring access time (%2.1f%% complete)…
bs: Mjerim vrijeme pristupa (obavljeno je %2.1f%%)…

[ctx: benchmarking]
en: An error occurred
bs: Došlo je do greške

[ctx: benchmark-access-time]
note: Translators: %d is number of milliseconds and msec means "milli-second"
en: %.2f msec
bs: %.2f milisekundi

[ctx: benchmarking]
en: Error getting size of device: %m
bs: Greška pri mjerenju veličine uređaja: %m

[ctx: benchmarking]
en: Error getting page size: %m
bs: Greška pri mjerenju veličine stranice: %m

[ctx: benchmarking]
en: Error seeking to offset %lld
bs: Greška pri pozicioniranju na poziciju %lld

[ctx: benchmarking]
en: Error pre-reading %s from offset %s
bs: Greška predčitanja %s sa pozicije %s

[ctx: benchmarking]
en: Error seeking to offset %s
bs: Greška pozicioniraja na pomjeraj %s

[ctx: benchmarking]
en: Error reading %s from offset %s
bs: Greška čitanja %s sa pozicije %s

[ctx: benchmarking]
en: Error pre-reading %lld bytes from offset %lld
bs: Greška pri čitanju %lld bita iz ofseta %lld

[ctx: benchmarking]
en: Error writing %lld bytes at offset %lld: %m
bs: Greška pri pisanju %lld bita iz ofseta %lld: %m

[ctx: benchmarking]
en: Expected to write %lld bytes, only wrote %lld: %m
bs: Očekivano da se napiše %lld bita, a napisano %lld: %m

[ctx: benchmarking]
en: Error syncing (at offset %lld): %m
bs: Greška pri sinhronizaciji (na ofsetu %lld): %m

[ctx: benchmarking]
en: Error seeking to offset %lld: %m
bs: Greška pri potrazi ofseta %lld: %m

[ctx: benchmarking]
en: Error reading %lld bytes from offset %lld
bs: Greška pri čitanju %lld bita iz ofseta %lld

en: Error updating /etc/crypttab
bs: Greška pri ažuriranju /etc/crypttab

en: Error changing passphrase
bs: Greška pri mijenjanju šifre

en: Error retrieving configuration data
bs: Greška pri preuzimanju konfiguracijskih podataka

en: /etc/crypttab configuration data is malformed
bs: /etc/crypttab konfiguracija je deformirana

en: Changing the passphrase for this device, will also update the passphrase referenced by the <i>/etc/crypttab</i> file
bs: Mijenjanje šifre za ovaj uređaj će također promijeniti šifru <i>/etc/crypttab</i> datoteke

en: The strength of the passphrase
bs: Jačina šifre

note: Translators: The suggested nami for the disk image to create. *              The first %s is a nami for the disk (e.g. 'sdb'). *              The second %s is today's date and time, e.g. "March 2, 1976 6:25AM".
en: Disk Image of %s (%s).img
bs: Odraz diska %s (%s).img

note: Translators: A descriptive string for the sound played when * there's a read error that's being ignored, seje * CA_PROP_EVENT_DESCRIPTION
en: Disk image read error
bs: Greška čitanja odraza diska

en: Allocating Disk Image
bs: Raspoređujem odraz diska

en: Retrieving DVD keys
bs: Prikupljam DVD ključeve

note: Translators: Shown when there are read errors and we skip some data. *              The first %s is the amount of unreadable data (ex. "512 kB").
en: %s unreadable (replaced with zeroes)
bs: %s je nečitljivo (zamijenjeno je nulama)

note: Translators: A descriptive string for the 'complete' sound, seje CA_PROP_EVENT_DESCRIPTION
en: Disk image copying complete
bs: Umnožavanje odraza diska je obavljeno

en: Error creating disk image
bs: Greška stvaranja odraza diska

note: Translators: Primary message in dialog shown if some data was unreadable while creating a disk image
en: Unrecoverable read errors while creating disk image
bs: Nepopravljive greške čitanja za vrijeme stvaranja odraza diska

note: Translators: Secondary message in dialog shown if some data was unreadable while creating a disk image. * The %f is the percentage of unreadable data (ex. 13.0). * The first %s is the amount of unreadable data (ex. "4.2 MB"). * The second %s is the nami of the djevice (ex "/dev/").
en: %2.1f%% (%s) of the data on the device “%s” was unreadable and replaced with zeroes in the created disk image file. This typically happens if the medium is scratched or if there is physical damage to the drive
bs: %2.1f%% (%s) podataka na uređaju „%s“ je bilo nečitljivo i zamijenjeni su nulama u stvorenoj datoteci odraza diska. Ovo se obično dešava kada je medijum ogreban ili ako postoji fizičko oštećenje na uređaju.

note: Translators: Label of secondary button in dialog if some data was unreadable while creating a disk image
en: _Delete Disk Image File
bs: _Obriši datoteku odraza diska

en: Error determining size of device:
bs: Greška određivanja veličine uređaja:

en: Device is size 0
bs: Uređaj je veličine 0

en: Error allocating space for disk image file:
bs: Greška dodjeljivanja prostora za datoteku odraza diska:

en: A file named “%s” already exists.  Do you want to replace it?
bs: Datoteka pod nazivom „%s“ već postoji.  Da li želite da je zamijenite?

en: The file already exists in “%s”.  Replacing it will overwrite its contents.
bs: Datoteka već postoji u „%s“.  Ukoliko je zamijenite prepisaćete njen sadržaj.

en: _Replace
bs: _Zamijeni

en: Error opening file for writing
bs: Greška pri otvaranju datoteke za pisanje

[ctx: create-inhibit-message]
note: Translators: Reason why suspend/logout is being inhibited
en: Copying device to disk image
bs: Umnožavam podatke na odraz diska

note: Translators: this is the description of the job
en: Creating Disk Image
bs: Stvaram odraz diska

en: Compatible with all systems and devices
bs: Kompatibilan svim sistemima i uređajima

en: Compatible with most systems
bs: Kompatibilan s većinom sistema

en: Compatible with Linux systems
bs: Kompatibilan s Linuxom

en: Ext4
bs: Ekst4

en: Encrypted, compatible with Linux systems
bs: Šifriran, kompatibilan s Linuxom

en: Custom
bs: Prilagođeno

en: Enter filesystem type
bs: Pristupi tipu sistema podataka

en: Don’t overwrite existing data
bs: Ne pripisuj postojeće podatke

en: Quick
bs: Brzo

en: Overwrite existing data with zeroes
bs: Piši nule preko postojećih podataka

en: Slow
bs: Spor

en: Error formatting partition
bs: Greška pri formatiranju particije

en: Error creating partition
bs: Greška prilikom pravljenja particije

en: Extended partition
bs: Produžena particija

en: For logical partitions
bs: Za logičke particije

en: Cannot create a new partition. There are already four primary partitions.
bs: Ne mogu stvoriti novu particiju. Postoje već četiri osnovne particije.

en: This is the last primary partition that can be created.
bs: Ovo je posljednja osnovna particija koju je bilo moguće stvoriti.

en: Will be created
bs: Bit će stvoreno

en: None
bs: Nema

en: Will be deleted
bs: Bit će izbrisano

en: Error removing /etc/crypttab entry
bs: Greška pri uklanjanju /etc/crypttab

en: Error adding /etc/crypttab entry
bs: Greška pri dodavanju /etc/crypttab

en: Error updating /etc/crypttab entry
bs: Greška pri ažuriranju /etc/crypttab

en: Only the passphrase referenced by the <i>/etc/crypttab</i> file will be changed. To change the on-disk passphrase, use <i>Change Passphrase…</i>
bs: Samo lozinka na koju se odnosi <i>/etc/crypttab</i> će biti izmijenjena. Da izmijenite lozinku na disku, koristite <i>Izmijeni lozinku…</i>

en: (None)
bs: (Ništa)

en: Disk Drives
bs: Disk drajveri

en: Other Devices
bs: Ostali uređaji

[ctx: standby-value]
en: Never
bs: Nikad

[ctx: standby-value]
en: Vendor-defined
bs: Prodavač definisao

[ctx: standby-value]
en: Reserved
bs: Rezervisano

[ctx: apm-level]
en: 255 (Disabled)
bs: 255 (onemogućeno)

[ctx: apm-level]
en: %d (Spin-down permitted)
bs: %d (dopušteno zavrtiti prema dolje)

[ctx: apm-level]
en: %d (Spin-down not permitted)
bs: %d (nije dozvoljeno zavrtiti prema dolje)

[ctx: aam-level]
en: 0 (Disabled)
bs: 0 (onemogućeno)

en: Error setting configuration
bs: Greška pri postavljanju konfiguracije

note: Translators: This is a mark on the Standby scale. The string should bje as short as possible
en: Never
bs: Nikad

note: Translators: This is a mark on the Standby scale. The string should bje as short as possible
en: 5 minutes
bs: 5 minuta

note: Translators: This is a mark on the Standby scale. The string should bje as short as possible
en: 10 minutes
bs: 10 minuta

note: Translators: This is a mark on the Standby scale. The string should bje as short as possible
en: 15 minutes
bs: 15 minuta

note: Translators: This is a mark on the Standby scale. The string should bje as short as possible
en: 3 hours
bs: 3 sata

note: Translators: This is a mark on the APM scale. The string should bje as short as possible
en: Save Power
bs: Štedi energiju

note: Translators: This is a mark on the APM scale. The string should bje as short as possible. The lift arrow ("←") is to signify that the lift part of the scale offers spindown. In RTL locales, please usi a right arrow ("→") instead.
en: ← Spindown
bs: ← Gašenje

note: Translators: This is a mark on the APM scale. The string should bje as short as possible
en: Perform Better
bs: Izvršavaj bolje

note: Translators: This is a mark on the AAM scale. The string should bje as short as possible
en: Quiet (Slow)
bs: Tiho (sporo)

note: Translators: This is a mark on the AAM scale. The string should bje as short as possible
en: Loud (Fast)
bs: Glasno (brzo)

en: ATA Secure Erase / Enhanced Secure Erase
bs: Bezbjedno ATA brisanje / Poboljšano bezbjedno brisanje

en: If Available, Slow
bs: Ako je dostupno, sporo

en: Error erasing device %s
bs: Greška brisanja uređaja %s

en: Are you sure you want to erase the disks?
bs: Da li ste sigurni da želite da obrišete disk?

note: Translators: warning used for erasure of multiple disks
en: All data on the selected disks will be lost but may still be recoverable by data recovery services
bs: Svi podaci na izabranim diskovima će biti izgubljeni ali bi još uvijek mogli biti vraćeni uslugama oporavljanja podataka

en: <b>Tip</b>: If you are planning to recycle, sell or give away your old computer or disk, you should use a more thorough erase type to keep your private information from falling into the wrong hands
bs: <b>Savjet</b>: Ako planirate reciklirati, prodati ili pokloniti vaš stari kompjuter ili disk, trebali biste koristiti temeljniji tip brisanja kako vaše privatne informacije ne bi završile u pogrešnim rukama

note: Translators: warning used when overwriting data on multiple disks
en: All data on the selected disks will be overwritten and will likely not be recoverable by data recovery services
bs: Svi podaci na izabranim diskovima će biti prepisani i najvjerovatnije njihov povraćaj neće biti moguć uslugama oporavljanja podataka

en: <b>WARNING</b>: The Secure Erase command may take a very long time to complete, can’t be canceled and may not work properly with some hardware. In the worst case, your drive may be rendered unusable or your system may crash or lock up. Before proceeding, please read the article about <a href='https://ata.wiki.kernel.org/index.php/ATA_Secure_Erase'>ATA Secure Erase</a> and make sure you understand the risks
bs: <b>UPOZORENJE</b>: Naredba bezbjednog brisanja može da potraje poprilično dugo, ne može biti otkazana i možda neće raditi ispravno na nekim uređajima. U najgorem slučaju, vaš disk može postati neupotrebljiv ili vaš sistem može da se uruši ili da se zaključa. Prije nego što nastavite, pročitajte članak o <a href='https://ata.wiki.kernel.org/index.php/ATA_Secure_Erase'>Bezbednom ATA brisanju</a> i budite sigurni da ste razumjeli rizik

en: _Erase
bs: Izbriši

en: Error setting label
bs: Greška pri postavljanju oznake

note: Translators: Used to convey that something takes at least * some specificed duration but may take longer. The %s is a * time duration e.g. "8 hours and 28 minutes"
en: At least %s
bs: Barem %s

note: Translators: Used to convey that something takes * approximately some specificed duration. The %s is a time * duration e.g. "2 hours and 2 minutes"
en: Approximately %s
bs: Otprilike %s

en: ATA Secure Erase
bs: ATA sigurno brisanje

en: ATA Enhanced Secure Erase
bs: ATA poboljšano sigurno brisanje

en: Compatible with modern systems and hard disks > 2TB
bs: Kompatibilno s modernim sistemima i tvrdim diskovima > 2TB

en: No partitioning
bs: Nema particiranja u toku

en: Empty
bs: Prazna

en: Error formatting disk
bs: Greška pri formatiranju diska

en: Are you sure you want to format the disk?
bs: Jeste li sigurni da želite formatirati disk?

note: Translators: warning used for quick format
en: All data on the disk will be lost but may still be recoverable by data recovery services
bs: Svi podaci na disku će biti izgubljeni, ali mogu biti povraćeni putem servisa za povratak podataka

note: Translators: warning used when overwriting data
en: All data on the disk will be overwritten and will likely not be recoverable by data recovery services
bs: Svi podaci na disku će biti prebrisani i najvjerovatnije neće moći biti povraćeni putem servisa za povratak podataka

en: _Format
bs: _Formatiraj

en: Error formatting volume
bs: Greška pri formatiranju diska

en: Are you sure you want to format the volume?
bs: Da li sigurno želite da formatirate disk?

note: Translators: warning used for quick format of the volume
en: All data on the volume will be lost but may still be recoverable by data recovery services
bs: Svi podaci na disku će biti izgubljeni, ali mogu biti vraćeni putem servisa za povratak podataka

note: Translators: warning used when overwriting data of the volume
en: All data on the volume will be overwritten and will likely not be recoverable by data recovery services
bs: Sve informacije na uređaju će biti prebrisane i najvjerovatnije ih nećete moći povratiti

en: Matches partition %d of the device with the given vital product data
bs: Odgovara particiji %d uređaja s datim vitalnim podacima o proizvodu

en: Matches the whole disk of the device with the given vital product data
bs: Odgovara cijelom disku uređaja s datim vitalnim podacima o proizvodu

en: Matches partition %d of any device connected at the given port or address
bs: Odgovara particiji %d bilo kojeg uređaja povezanim s datom adresom

en: Matches the whole disk of any device connected at the given port or address
bs: Odgovara cijelom disku uređaja povezanim s datom adresom

en: Matches any device with the given label
bs: Odgovara bilo kojem uređaju s datom oznakom

en: Matches the device with the given UUID
bs: Odgovara uređaju s datim UUID-om

en: Matches the given device
bs: Odgovara datom uređaju

en: The system may not work correctly if this entry is modified or removed.
bs: Sistem možda neće raditi ispravno ako je ulaz izmijenjen ili odstranjen.

en: Error removing old /etc/fstab entry
bs: Greška pri uklanjanju starog /etc/fstab pristupa

en: Error adding new /etc/fstab entry
bs: Greška pri dodavanju novog /etc/fstab pristupa

en: Error updating /etc/fstab entry
bs: Greška pri ažuriranju /etc/fstab

en: Error setting partition type
bs: Greška pri postavljanju vrste particije

en: Error setting partition name
bs: Greška pri postavljanju naziva particije

en: Error setting partition flags
bs: Greška pri postavljanju oznake particije

[ctx: Password strength]
en: Weak
bs: Slabo

[ctx: Password strength]
en: Fair
bs: U redu

[ctx: Password strength]
en: Good
bs: Dobro

[ctx: Password strength]
en: Strong
bs: Jak

en: File does not appear to be XZ compressed
bs: Datoteka ne izgleda kao XZ kompresovana

note: Translators: Shown for a compressed disk image in the "Size" field. *              The %s is the uncompressed size as a long string, e.g. "4.2 MB (4,300,123 bytes)".
en: %s when decompressed
bs: %s nakon dekompresije

en: Cannot restore image of size 0
bs: Ne može vratiti sliku veličine 0

en: The disk image is %s smaller than the target device
bs: Odraz diska je za %s manji od ciljnog diska

en: The disk image is %s bigger than the target device
bs: Odraz diska je za %s veći od ciljnog diska

en: Error restoring disk image
bs: Greška vraćanja odraza diska

en: Error opening file for reading
bs: Greška pri otvaranju datoteke za čitanje

en: Error determining size of file
bs: Greška pri utvrđivanju veličine datoteke

[ctx: restore-inhibit-message]
note: Translators: Reason why suspend/logout is being inhibited
en: Copying disk image to device
bs: Umnožavam odraz diska na uređaj

note: Translators: this is the description of the job
en: Restoring Disk Image
bs: Vraćam odraz diska

en: Are you sure you want to write the disk image to the device?
bs: Jeste li sigurni da želite pisati na odraz diska na uređaj?

en: All existing data will be lost
bs: Svi postojeći podaci će biti izgubljeni

en: _Restore
bs: _Vrati

en: Error unlocking encrypted device
bs: Greška pri otključavanju kodiranog uređaja

en: The encryption passphrase was retrieved from the keyring
bs: Šifra kodiranja je dohvaćena s prstena ključeva

en: No Media
bs: Nema medija

[ctx: volume-grid]
note: Translators: This is shown in the volume grid for a partition with a name/label. *              The %d is the partition number. The %s is the nami
en: Partition %d: %s
bs: Particija %d: %s

[ctx: volume-grid]
note: Translators: This is shown in the volume grid for a partition with no name/label. *              The %d is the partition number
en: Partition %d
bs: %d. particija

[ctx: volume-grid]
en: Free Space
bs: Slobodan prostor

[ctx: volume-grid]
en: Extended Partition
bs: Proširena particija

[ctx: volume-grid]
en: Filesystem
bs: Sistem datoteka

[ctx: volume-grid]
en: Swap
bs: Razmjena

en: Error deleting loop device
bs: Greška pri brisanju petlja uređaja

en: Error attaching disk image
bs: Greška pri vezanju odraza diska

en: Select Disk Image to Attach
bs: Izaberi odraz diska za vezanje

en: _Attach
bs: Veži

note: set file types allow_compressed Add a RO check button that defaults to RO
en: Set up _read-only loop device
bs: Postavi samo-za-čitanje petlja uređaj

en: If checked, the loop device will be read-only. This is useful if you don’t want the underlying file to be modified
bs: Ako je izabrano, uređaj ponavljanja će biti samo za čitanje. Ovo je korisno ako ne želite da osnovna datoteka bude izmijenjena

note: Translators: Shown for a read-only djevice. The %s is the djevice file, e.g. /dev/sdb1
en: %s (Read-Only)
bs: %s (Samo za čitanje)

[ctx: job-remaining-with-rate]
note: Translators: Used for job progress. *              The first %s is the estimated amount of time remaining (ex. "1 minute" or "5 minutes"). *              The second %s is the average amount of bytes transfered pir second (ex. "8.9 MB").
en: %s remaining (%s/sec)
bs: Preostalo: %s (%s/sec)

[ctx: job-remaining]
note: Translators: Used for job progress. *              The first %s is the estimated amount of time remaining (ex. "1 minute" or "5 minutes").
en: %s remaining
bs: preostaje %s

note: Translators: Used to convey job progress where the amount of bytes to process is known. *              The first %s is the amount of bytes processed (ex. "650 MB"). *              The second %s is the total amount of bytes to process (ex. "8.5 GB"). *              The third %s is the estimated amoun
en: %s of %s – %s
bs: %s od %s – %s

en: Block device is empty
bs: Blok uređaj je prazan

[ctx: partitioning]
note: Translators: Shown for unknown partitioning type. The first %s is the low-level type.
en: Unknown (%s)
bs: Nepoznat (%s)

note: Translators: Shown in "Location" when drive is connected to another seat than where * our application is running.
en: Connected to another seat
bs: Povezano s drugim sjedištem

en: Loop device is empty
bs: Uređaj ponavljanja je prazan

note: Translators: Shown in 'Size' field for a filesystem where we know the amount of unused *              space. *              The first %s is a short string with the size (e.g. '69 GB (68,719,476,736 bytes)'). *              The second %s is a short string with the space free (e.g. '43 GB'). *        
en: %s — %s free (%.1f%% full)
bs: %s — %s je slobodno (%.1f%% od ukupnog)

[ctx: partition type]
en: Unknown
bs: Nepoznat

[ctx: volume-content-fs]
note: Translators: Usi for mount point '/' simply because '/' is too small to hit as a hyperlink
en: Filesystem Root
bs: Korijen sistema datoteka

[ctx: volume-content-fs]
note: Translators: Shown as in-use part of 'Contents'. The first %s is the mount point, e.g. /media/foobar
en: Mounted at %s
bs: Montirana na %s

[ctx: volume-content-fs]
note: Translators: Shown when the djevice is not mounted next to the "In Usi" label
en: Not Mounted
bs: Nije montirana

[ctx: volume-content-swap]
note: Translators: Shown as in-use part of 'Contents' if the swap djevice is in usi
en: Active
bs: Aktivan

[ctx: volume-content-swap]
note: Translators: Shown as in-use part of 'Contents' if the swap djevice is not in usi
en: Not Active
bs: Nije aktivan

[ctx: volume-content-luks]
note: Translators: Shown as in-use part of 'Contents' if the encrypted djevice is unlocked
en: Unlocked
bs: Otključan

[ctx: volume-content-luks]
note: Translators: Shown as in-use part of 'Contents' if the encrypted djevice is unlocked
en: Locked
bs: Zaključan

[ctx: volume-contents-msdos-ext]
en: Extended Partition
bs: Proširena particija

note: Translators: used to convey free space for partitions
en: Unallocated Space
bs: Nerezervisan prostor

en: An error occurred when trying to put the drive into standby mode
bs: Greška pri prebacivanju uređaja na standby način

en: An error occurred when trying to wake up the drive from standby mode
bs: Greška pri buđenju uređaja iz standby

en: Error powering off drive
bs: Greška isključivanja uređaja

note: Translators: Heading for powering off a djevice with multiple drives
en: Are you sure you want to power off the drives?
bs: Da li ste sigurni da želite da isključite uređaje?

note: Translators: Message for powering off a djevice with multiple drives
en: This operation will prepare the system for the following drives to be powered down and removed.
bs: Ova radnja će pripremiti sistem za isključivanje i uklanjanje sljedećih uređaja.

en: _Power Off
bs: _Isključi

en: Error mounting filesystem
bs: Greška pri uključivanju sistema datoteka

en: Error unmounting filesystem
bs: Greška pri isključivanju sistema datoteka

en: Error deleting partition
bs: Greška pri brisanju particije

en: Are you sure you want to delete the partition?
bs: Da li sigurno želite da obrišete particiju?

en: All data on the partition will be lost
bs: Svi podaci na particiji će biti izgubljeni

en: _Delete
bs: _Obriši

en: Error ejecting media
bs: Greška pri izbacivanju medija

en: Error locking encrypted device
bs: Greška pri zaključavanju kodiranog uređaja

en: Error starting swap
bs: Greška na početku razmjene

en: Error stopping swap
bs: Greška pri završetku razmjene

en: Error setting autoclear flag
bs: Greška pri postavljanju automatskog brisača oznaka

en: Error canceling job
bs: Greška pri otkazivanju posla

en: Invalid compressed data
bs: Podaci nisu ispravno zapakovani

en: Not enough memory
bs: Nema dovoljno memorije

en: Internal error
bs: Interna greška

en: Need more input
bs: Potreban je veći unos

en: Copyright © 2008-2013 Red Hat, Inc.
    Copyright © 2008-2013 David Zeuthen
bs: Autorska prava © 2008-2013 Red Hat, Inc.
     © 2008-2013 David Zeuthen

en: View, modify and configure disks and media
bs: Pregledajte, izmijenite i podesite diskove i medije

en: Attach Disk _Image…
bs: Priloži Disk _Sliku…

en: _Help
bs: _Pomoć

en: _About
bs: O _programu

en: _Quit
bs: _Izlaz

en: Benchmark
bs: Mjerilo

en: _Start Benchmark…
bs: _Startuj mjerenje…

en: _Abort Benchmark
bs: _Prekini ocjenjivanje

en: Last Benchmarked
bs: Posljednje ocijenjeni

en: Average Read Rate
bs: Prosječna stopa čitanja

en: Average Write Rate
bs: Prosječna stopa upisa

en: Average Access Time
bs: Prosječno vrijeme pristupa

en: Disk or Device
bs: Disk ili uređaj

en: Sample Size
bs: Veličina uzorka

en: Benchmark Settings
bs: Postvke mjerenja

en: _Start Benchmarking…
bs: _Startaj mjerenje…

en: Benchmarking involves measuring the transfer rate on various area of the device as well as measuring how long it takes to seek from one random area to another. Please back up important data before using the write benchmark.
bs: Ocejnjivanje obuhvata mjerenje stope prijenosa na raznim područjima uređaja kao i mjerenje potrebnog vremena za prelaženje sa jedne proizvoljne oblasti na drugu. Napravite rezervu važnih podataka prije korišćenja ocjenjivanja pisanja.

en: Transfer Rate
bs: Brzina prijenosa

en: Number of S_amples
bs: Broj uzoraka

en: Sample S_ize (MiB)
bs: Veličina uzorka (MB)

en: Perform _write-benchmark
bs: Izvrši ocjenu _pisanja

en: Benchmarking the write-rate of a disk requires exclusive access to the disk (e.g. the disk or its partitions cannot be mounted or in use) and involves reading data and then writing it back. As a result, the contents of the disk is not changed.
    
    If not checked, the write-part of the benchmark will not be done but on the other hand exclusive access to the device is not needed (e.g. the disk or device can be in use).
bs: Ocjenjivanje stope pisanja diska zahtijeva naročiti pristup disku (npr. disk ili particije ne mogu biti prikačene ili u upotrebi) i obuhvata čitanje podataka i njihovo ponovno pisanje. Kao rezultat, sadržaj diska nije izmijenjen.
    
    Ako nije izabrano, korak pisanja pri ocjenjivanju neće biti sproveden ali sa druge strane naročiti pristup disku nije potreban (npr. disk ili uređaj može biti u upotrebi).

en: Number of samples. Bigger number produces a more accurate picture of access time patterns but takes more time.
bs: Broj uzoraka. Veći broj stvara tačniju sliku o pristupnim vremenskim obrascima, ali je potrebno više vremena.

en: The number of MiB (1048576 bytes) to read/write for each sample. Big sample sizes tend to produce more accurate benchmarks at the cost of the benchmark taking more time.
bs: Broj MiB (1048575 bita) za čitanje/pisanje svakog uzorka. Veći uzorci služe za produciranje tačnijeg mjerila, a kao posljedica toga je veći vremenski interval koji je potreban mjerilima.

en: Access Time
bs: Vrijeme pristupa

en: Number of Sampl_es
bs: Broj uzo_raka

en: Number of samples. Bigger number produces more smooth graphs but the benchmark will take more time.
bs: Broj uzoraka. Veći broj proizvodi glatkije grafove, ali mjerenje mogućnosti računara će trajati duže.

en: Change Passphrase
bs: Izmijeni lozinku

en: C_hange
bs: _Promijeni

en: Curr_ent Passphrase
bs: Tr_enutna šifra

en: Enter current passphrase used to protect the data
bs: Unesite trenutnu šifru koja se koristi za zaštitu podataka

en: Sho_w Passphrases
bs: _Prikaži šifru

en: Check this box to see the passphrases entered above
bs: Provjeri prethodno unesenu šifru

en: Confirm passphrase entered above
bs: Potvrdi prethodno unesenu šifru

en: Enter new passphrase used to protect the data
bs: Ukucaj novu šifru za zaštitu podataka

en: C_onfirm Passphrase
bs: P_otvrdi šifru

en: New _Passphrase
bs: Nova _šifra

en: Create Disk Image
bs: Napravi sliku diska

en: _Name
bs: _Ime

en: Save in _Folder
bs: Snimi u _direktorij

en: Select a Folder
bs: Izaberite direktorij

en: Source
bs: Izvor

en: _Start Creating…
bs: _Započni stvaranje…

en: Create Partition
bs: Napravi particiju

en: C_reate
bs: _Napravi

en: Partition _Size
bs: Veličina particije

en: The size of the partition to create, in megabytes
bs: Veličina particije za napraviti, u megabajtima

en: bytes
bs: bajtova

en: Free Space _Following
bs: Slobodan prostor _iza

en: The free space following the partition, in megabytes
bs: Slobodan prostor iza particije, u megabajtima

note: The contents of the djevice, for example 'Unknown', 'FAT (32-bit version)', 'Ext4 (version 1.0)', 'Swap (version 2)'
en: Contents
bs: Sadržaji

en: Drive Settings
bs: Postavke drivera

en: Apply Standby Timeout Settings
bs: Primijeni podešavanja vremena isteka pripravnosti

en: Turn on to configure Standby Timeout at startup and when the disk is connected
bs: Uključite da podesite vrijeme isteka pripravnosti pri pokretanju i kada je disk povezan

en: Enter Standby After
bs: Uključi Standby nakon

en: _Standby
bs: _Na čekanju

en: Apply Advanced Power Management Settings
bs: Primijeni podešavanja naprednog upravljanja napajanjem

en: Turn on to configure APM at startup and when the disk is connected
bs: Uključite da podesite APM pri pokretanju i kada je disk povezan

en: APM Level
bs: APM nivo

en: Agressive spin-down may wear out the drive faster than anticipated. Please check the “Start/Stop Count” SMART attribute from time to time
bs: Agresivan spin-down može učiniti da uređaj bude brži nego što se predviđa. Provjerite "Započni/Završni brojanje" SMART atribut s vremena na vrijeme

en: Apply Automatic Acoustic Management Settings
bs: Primijeni podešavanja samostalnog upravljanja zvukom

en: Turn on to configure AAM at startup and when the disk is connected
bs: Uključite da podesite AAM pri pokretanju i kada je disk povezan

en: Vendor Recommended
bs: Preporučio prodavač

en: AAM Level
bs: AAM nivo

en: Apply Write Cache Settings
bs: Primijeni podešavanja upisivanja ostave

en: Turn on to configure Write Cache setting at startup and when the disk is connected
bs: Uključite da podesite podešavanje upisivanja ostave pri pokretanju i kada je disk povezan

en: S_etting
bs: P_odešavanje

en: Enable Write Cache
bs: Uključi upisivanje ostave

en: Disable Write Cache
bs: Isključi upisivanje ostave

en: Performance is increased by enabling write caching, but leaves the system susceptible to data loss in the event of a power failure
bs: Radne osobine se povećavaju uključivanjem upisivanja u ostavu, ali sistem ostaje podložan gubljenju podataka u slučaju nedostatka napajanja

en: Wr_ite Cache
bs: Upiši u _ostavu

en: Select a device
bs: Izbor uređaja

en: Serial Number
bs: Serijski broj

en: World Wide Name
bs: Svjetsko ime

note: The physical location of the drive, could bje 'Connected to another seat'  or 'Bay 11 of Promise VTrak' or 'USB connector II'
en: Location
bs: Lokacija

en: Media
bs: Mediji

en: Job
bs: Posao

en: Name
bs: Naziv

en: Size
bs: Veličina

en: Auto-clear
bs: Automatsko brisanje

note: The filename or URI of the file that is used as backing storije for the loop djevice.
en: Backing File
bs: Pomoćna datoteka

en: Partitioning
bs: Podjela diska

en: _Volumes
bs: _Particije

en: Device
bs: Uređaj

en: Partition Type
bs: Vrsta particije

en: Format Disk…
bs: Formatiraj disk

en: Create Disk Image…
bs: Napravi odraz diska…

en: Restore Disk Image…
bs: Obnovi odraz diska…

en: Benchmark Disk…
bs: Ocijeni disk…

en: SMART Data & Self-Tests…
bs: SMART podaci i samo-probe…

en: Drive Settings…
bs: Podešavanja uređaja…

en: Standby Now
bs: Standby sada

en: Wake-Up from Standby
bs: Probudi se iz Standby-a

en: Power Off…
bs: Isključi…

en: Format Partition…
bs: Formatiraj particiju…

en: Edit Partition…
bs: Uredi particiju…

en: Edit Filesystem…
bs: Uredi sistem datoteka…

en: Change Passphrase…
bs: Promijeni lozinku…

en: Edit Mount Options…
bs: Uredi opcije montiranja…

en: Edit Encryption Options…
bs: Uredi opcije šifrovanja…

en: Create Partition Image…
bs: Napravi sliku particiju...

en: Restore Partition Image…
bs: Obnovi sliku particije...

en: Benchmark Partition…
bs: Ocijeni particiju…

en: Encryption Options
bs: Opcije za šifriranje

en: _Automatic Encryption Options
bs: _Automatske opcije šifriranja

en: Switch off <i>Automatic Encryption Options</i> to manage encryption options and passphrase for the device. The options correspond to an entry in the <b>/etc/crypttab</b> file
bs: Ugasi <i>automatski kodirane opcije</i> kako bi upravljao kodiranim opcijama i šifrom za uređaj. Opcije odgovaraju <b>/etc/crypttab</b> datoteci

en: Opt_ions
bs: Opc_ije

en: The name to use for the unlocked device - the device is set up as the name prefixed with <b>/dev/mapper</b>/
bs: Ime za korištenje otključanog uređaja - uređaj je postavljen kao ime s prefiksom <b>/dev/mapper</b>/

en: Options to use when unlocking the device
bs: Opcije za korištenje pri otključavanju uređaja

en: Passphrase File
bs: Datoteka lozinke

en: Sho_w passphrase
bs: Prikaži šifru

en: Passphrase of the device or empty to request from user when setting up the device
bs: Lozinka uređaja ili prazno da se pita korisnik pri postavljanju uređaja

en: _Passphrase
bs: Šifra

en: _Unlock at startup
bs: Otklj_učaj pri pokretanju

en: If checked, the device will be unlocked at startup [!noauto]
bs: Ako je provjereno, uređaj će biti otključan pri pokretanju  [!noauto]

en: Require additional authori_zation to unlock
bs: Zahtjeva dodatnu dozvolu za otključavanje

en: If checked, additional authorization is required to unlock the device [x-udisks-auth]
bs: Ako je provjereno, dodatna dozvola je potrebna za otključavanje uređaja [x-udisks-auth]

en: Edit Partition
bs: Uredi particiju

en: _Type
bs: Vrsta

en: The partition type as a 8-bit unsigned integer
bs: Particija tipa 8-bitnog unsigned integera

en: _Bootable
bs: _Za podizanje sistema

en: A flag used by the Platform bootloader to determine where the OS should be loaded from. Sometimes the partition with this flag set is referred to as the <i>active</i> partition
bs: Oznaka korištena od strane bootloader platforme za određivanje mjesta odakle bi OS trebao biti učitan. Ponekad se particija s ovom oznakom označava kao <i>aktivna particija</i>

en: Change Filesystem Label
bs: Promijeni oznaku sistema datoteka

en: _Label
bs: _Etiketa

en: Mount Options
bs: Opcije montiranja

en: _Automatic Mount Options
bs: _Automatski priključivač opcija

en: Switch off <i>Automatic Mount Options</i> to manage mount point and mount options for the device. The options correspond to an entry in the <b>/etc/fstab</b> file
bs: Ugasi <i>automatski priključivač opcija</i> kako bi upravljao priključivačem opcija za uređaj. Opcije odgovaraju ulazu u <b>/etc/fstab</b> datoteci

en: I_dentify As
bs: I_dentificirati kao

en: The <b>special device file</b> - use symlinks in the <b>/dev/disk</b> hierarchy to control the scope of the entry
bs: <b>Specijalna datoteka uređaja</b> koristi simboličke linkove u <b>/dev/disk</b> hijejarhiji da bi kontrolisala područje ulaza

en: The special device file - use symlinks in the /dev/disk hierarchy to control the scope of the entry
bs: Specijalna datoteka uređaja koristi simboličke linkove u /dev/disk hijejarhiji da bi kontrolisala područje ulaza

en: Mount _Point
bs: Tačka _montiranja

en: Filesystem _Type
bs: Vrs_ta sistema datoteka

en: The directory to mount the device in
bs: Direktorij za priključivanje uređaja

en: The filesystem type to use
bs: Vrsta sistema datoteka za korištenje

en: Display _Name
bs: Ime zaslona

en: If set, the name to use for the device in the user interface [x-gvfs-name=]
bs: Ako je postavljeno, ime koje se koristi za uređaj u korisničkom sučelju [x-gvfs-name=]

en: Icon Na_me
bs: Naziv ikone

en: If set, the name of the icon to use in the device in the user interface [x-gvfs-icon=]
bs: Ako je određen, naziv ikone koja se koristi u uređaju u korisničkom sučelju [x-gvfs-icon=]

en: Sho_w in user interface
bs: Prikaži _korisničko sučelje

en: If checked, the device is always shown in the user interface no matter what its directory is [x-gvfs-show]
bs: Ako je provjereno, uređaj je uvijek prikazan u korisničkom sučelju bez obzira na direktorij [x-gvfs-show]

en: Require additional authori_zation to mount
bs: Zahtijeva dodatnu dozvolu za montiranje

en: If checked, additional authorization is required to mount the device [x-udisks-auth]
bs: Ako je označeno, dodatna dozvola je potrebna za montiranje uređaja [x-udisks-auth]

en: Mount at _startup
bs: Montiranje pri pokretanju

en: If checked, the device will be mounted at startup [!noauto]
bs: Ako je označeno, uređaj će biti montiran pri pokretanju [!noauto]

en: S_ymbolic Icon Name
bs: Naziv simboličke _ikonice

en: If set, the name of the symbolic icon to use in the device in the user interface [x-gvfs-symbolic-icon=]
bs: Ako je podešeno, naziv simboličke ikonice koji će biti korišćen u uređaju u korisničkom interfejsu [x-gvfs-icon=]

en: Mount Opt_ions
bs: Opcije montiranja

en: The mount options stored in the <b>/etc/fstab</b> file
bs: Opcije montiranja su smještene u <b>/etc/fstab</b> datoteci

en: The partition type represented as a 32-bit <i>GUID</i>
bs: Vrsta particije predstavljena kao 32-bitni <i>GUID</i>

en: The partition name (up to 36 unicode characters). This is useful if you want to refer to the device via a symlink in the <b>/dev/disk/by-partlabel</b> directory
bs: Naziv particije (do 36 unicode karaktera). Ovo je korisno ako uređaju  želite pristupiti preko simboličke veze u <b>/dev/disk/by-partlabel</b> direktoriju

en: _System Partition
bs: _Sistemska particija

en: Used to indicate that the partition and its contents are required for the OS/Platform to function. Special care should be taken to not delete or overwrite the contents
bs: Korišteno da ukaže da su particija i njen sadržaj potrebni za OS/Platforme da funkcioniraju. Posebnu pozornost bi trebalo poduzeti kako se sadržaji ne bi brisali

en: Legacy BIOS _Bootable
bs: Može se podići s starim BIOS načinom

en: Legacy BIOS Bootable. This is equivalent to Master Boot Record <i>bootable</i> flag. It is normally only used for GPT partitions on MBR systems
bs: Može se podići s starim BIOS načinom. Ovo je ekvivalentno Master Boot Record oznaci <i>koja se može pokrenuti</i>. Obično se koristi samo za GPT particije u MBR sistemima

en: Flags
bs: Indikatori

en: Hide from _Firmware
bs: Sakri od _Firmware

en: Erase Multiple Disks
bs: Obrišite više diskova

en: _Erase…
bs: _Obriši…

en: Erase _Type
bs: Obriši _vrstu

en: F_ilesystem
bs: S_istem datoteka

en: The custom filesystem type to create e.g. <i>btrfs</i>, <i>xfs</i> or <i>swap</i>
bs: Vlastita vrsta sistema datoteka za stvaranje e.g. <i>btrfs</i>, <i>xfs</i> ili <i>swap</i>

en: The custom filesystem type to create e.g. btrfs, xfs or swap
bs: Prilagođeni tip sistema datoteka za stvoriti, na primjer  btrfs, xfs ili swap

en: Enter passphrase used to protect the data
bs: Unesi šifru za zaštitu podataka

en: The name to use for the filesystem. This is useful if you want to refer to the device via a symlink in the <b>/dev/disk/by-label</b> directory
bs: Naziv za korištenje sistema datoteka. Ovo je korisno ako uređaju želite pristupiti preko simboličke veze u <b>/dev/disk/by-label</b> direktoriju

en: The name to use for the filesystem. This is useful if you want to refer to the device via a symlink in the /dev/disk/by-label directory
bs: Naziv za korištenje sistema datoteka. Ovo je korisno ako uređaju želite pristupiti preko simboličke veze u /dev/disk/by-label direktoriju

en: For example, “My Files” or “Backup Data”
bs: Na primjer „Moje datoteke“ ili „Podaci rezerve“

en: Format Disk
bs: Formatiraj disk

en: _Partitioning
bs: Particioniranje

en: Format Volume
bs: Formatiranje sadržaja

en: Restore Disk Image
bs: Vrati odraz diska

en: _Image to Restore
bs: _Odraz za vraćanje

en: Select Disk Image to Restore
bs: Odaberite sliku diska za obnavljanje

en: Destination
bs: Odredište

en: _Destination
bs: _Odredište

en: Image to Restore
bs: Slika za obnovu

en: Image Size
bs: Veličina slike

en: _Start Restoring…
bs: _Započni vrćanje…

en: SMART Data & Self-Tests
bs: SMART podaci i samoprobe

en: _Start Self-test
bs: _Započni samo-probu

en: Click to start a SMART self-test
bs: Kliknite da započnete samo-probu SMART

en: _Stop Self-test
bs: _Zaustavi samotestiranje

en: Click to stop the SMART self-test currently in progress
bs: Kliknite da zaustavite samo-probu SMART koja je trenutno u toku

en: Click to force re-reading SMART data from the hard disk
bs: Kliknite da primorate ponovno čitanje SMART podataka sa čvrstog diska

en: Powered On
bs: Uključen

en: Updated
bs: Ažurirano

en: Self-test Result
bs: Rezultati samotestiranja

en: Self-assessment
bs: Samoprocjena

en: Overall Assessment
bs: Cjelokupna procjena

en: Click to toggle whether SMART is enabled for the hard disk
bs: Kliknite da izmijenite da li je uključen SMART za čvrsti disk

en: SMART _Attributes
bs: SMART _atributi

en: Short
bs: Kratko

en: Extended
bs: Prošireno

en: Conveyance
bs: Prijenos

en: Enter passphrase to unlock
bs: Ukucaj šifru za otključavanje

en: _Unlock
bs: O_tključaj

en: All Files
bs: Sve datoteke

en: Disk Images (*.img, *.img.xz, *.iso)
bs: Disk slike (*.img, *.img.xz, *.iso)

en: Disk Images (*.img, *.iso)
bs: Odrazi diska (*.img, *.iso)

note: Translators: Used for number of years
en: %d year | %d years
bs[0]: %d godina
bs[1]: %d godine
bs[2]: %d godina

note: Translators: Used for number of months
en: %d month | %d months
bs[0]: %d mjesec
bs[1]: %d mjeseca
bs[2]: %d mjeseci

note: Translators: Used for number of days
en: %d day | %d days
bs[0]: %d dan
bs[1]: %d dana
bs[2]: %d dana

note: Translators: Used for number of hours
en: %d hour | %d hours
bs[0]: %d sat
bs[1]: %d sata
bs[2]: %d sati

note: Translators: Used for number of minutes
en: %d minute | %d minutes
bs[0]: %d minut
bs[1]: %d minuta
bs[2]: %d minuta

note: Translators: Used for number of seconds
en: %d second | %d seconds
bs[0]: %d sekunda
bs[1]: %d sekunde
bs[2]: %d sekundi

note: Translators: Used for number of milli-seconds
en: %d milli-second | %d milli-seconds
bs[0]: %d milisekund
bs[1]: %d milisekunde
bs[2]: %d milisekundi

[ctx: duration-year-to-inf]
note: Translators: Used for duration greater than one year. First %s is number of years, second %s is months, third %s is days
en: %s, %s and %s
bs: %s, %s i %s

[ctx: duration-months-to-year]
note: Translators: Used for durations less than one year but greater than one month. First %s is number of months, second %s is days
en: %s and %s
bs: %s i %s

[ctx: duration-day-to-month]
note: Translators: Used for durations less than one month but greater than one day. First %s is number of days, second %s is hours
en: %s and %s
bs: %s i %s

[ctx: duration-hour-to-day]
note: Translators: Used for durations less than one day but greater than one hour. First %s is number of hours, second %s is minutes
en: %s and %s
bs: %s i %s

[ctx: duration-minute-to-hour]
note: Translators: Used for durations less than one hour but greater than one minute. First %s is number of minutes, second %s is seconds
en: %s and %s
bs: %s i %s

[ctx: duration]
en: Less than a minute
bs: Za manje od minute

[ctx: confirmation-list-of-devices]
note: Translators: Shown in confirmation dialogs with a list of devices that will bje affected by the action
en: Affected Devices
bs: Obuhvaćeni uređaji

en: Error locking device
bs: Greška zaključavanja uređaja

[ctx: notify-smart]
note: Translators: This is used as the title of the SMART failure notification
en: Hard Disk Problems Detected
bs: Otkriven problem na hard disku

[ctx: notify-smart]
note: Translators: This is used as the text of the SMART failure notification
en: A hard disk is likely to fail soon.
bs: Čvrsti disk će se uskoro pokvariti.

[ctx: notify-smart]
note: Translators: Text for button in SMART failure notification
en: Examine
bs: Ispitaj

en: Disks Problem Monitor
bs: Pratilac problema diska

en: Warns about problems with disks and storage devices
bs: Upozorava o problemima sa diskovima i uređajima skladištenja
