gnome-user-docs master - en to hr translation catalogue (551 entries)

note: (itstool) path: info/desc
en: <link xref="desktop-shield">Change the lock screen shield</link>, <link xref="desktop-favorite-applications">default favorite applications</link>, <link xref="desktop-lockscreen">lock the screen when idle</link>…
hr: <link xref="desktop-shield">Promjena zavjese zaključanog zaslona</link>, <link xref="desktop-favorite-applications">omiljenih zadanih aplikacija</link>, <link xref="desktop-lockscreen">zaključavanje zaslona kada je u mirovanju</link>…

note: (itstool) path: page/title (itstool) path: section/title
en: Appearance
hr: Izgled

note: (itstool) path: info/desc
en: How can I add an autostart application for all users?
hr: Kako dodati automatsko pokretanje aplikacije za sve korisnike?

note: (itstool) path: page/title
en: Add an autostart application for all users
hr: Dodavanje automatskog pokretanja aplikacije za sve korisnike

note: (itstool) path: page/p
en: To start an application automatically when the user logs in, you need to create a <file>.desktop</file> file for that application in the <file>/etc/xdg/autostart/</file> directory.
hr: Kako bi automatski pokrenuli aplikaciju kada se korisnik prijavi, trebate stvoriti <file>.desktop</file> datoteku za tu aplikaciju u <file>/etc/xdg/autostart/</file> direktoriju.

note: (itstool) path: steps/title
en: To add an autostart application for all users:
hr: Za dodavanje automatskog pokretanja aplikacije za sve korisnike:

note: (itstool) path: item/p
en: Create a <file>.desktop</file> file in the <file>/etc/xdg/autostart/</file> directory:
hr: Stvorite <file>.desktop</file> datoteku u <file>/etc/xdg/autostart/</file> direktoriju:

note: (itstool) path: item/p
en: Replace <var>Files</var> with the name of the application.
hr: Zamijenite <var>Files</var> nazivom aplikacije.

note: (itstool) path: item/p
en: Replace <var>nautilus -n</var> with the command you wish to use to run the application.
hr: Zamijenite <var>nautilus -n</var> naredbom koju želite koristiti za pokretanje aplikacije.

note: (itstool) path: item/p
en: You can use the <code>AutostartCondition</code> key to check for a value of a GSettings key.
hr: Možete koristiti <code>AutostartCondition</code> ključ za provjeru vrijednosti GSettings ključa.

note: (itstool) path: item/p
en: The session manager runs the application automatically if the key's value is true. If the key's value changes in the running session, the session manager starts or stops the application, depending on what the previous value for the key was.
hr: Upravitelj sesije automatski pokreće aplikaciju ako je vrijednost ključa istina. Ako se vrijednost ključa promijeni u sesiji koja se izvodi, upravitelj sesije pokreće ili zaustavlja aplikaciju, ovisno o tome koja je bila prijašnja vrijednost ključa.

note: (itstool) path: info/desc
en: How do I make extra backgrounds available to my users?
hr: Kako se dodatne pozadine mogu učiniti dostupnima korisnicima?

note: (itstool) path: page/title
en: Add extra backgrounds
hr: Dodavanje dodatnih pozadina

note: (itstool) path: page/p
en: You can make extra backgrounds available to users on your system by following the steps below.
hr: Dodatne pozadine možete učiniti dostupnima korisnicima na vašem sustavu slijedeći korake u nastavku.

note: (itstool) path: steps/title
en: Set extra backgrounds
hr: Postavljanje dodatnih pozadina

note: (itstool) path: item/p
en: Create an XML file, for example <file><var>filename</var>.xml</file>. In this file, use keys from the <sys>org.gnome.desktop.background</sys> GSettings schema to specify extra backgrounds and their appearance.
hr: Stvorite XML datoteku, primjerice <file><var>nazivdatoteke</var>.xml</file>. U ovoj datoteci koristite ključeve iz <sys>org.gnome.desktop.background</sys> GSettings sheme za određivanje dodatne pozadine i njihov izgled.

note: (itstool) path: item/p
en: Below is a list of the most frequently used keys:
hr: Ispod je popis najčešće korištenih ključeva:

note: (itstool) path: table/title
en: org.gnome.desktop.background schemas GSettings keys
hr: org.gnome.desktop.background schemas GSettings ključevi

note: (itstool) path: td/p
en: Key name
hr: Naziv ključa

note: (itstool) path: td/p
en: Possible values
hr: Moguće vrijednosti

note: (itstool) path: td/p
en: Description
hr: Opis

note: (itstool) path: td/p
en: Determines how the image set by <var>wallpaper_filename</var> is rendered.
hr: Određuje kako se prikazuje slika koju postavlja <var>pozadina_nazivdatoteke</var>.

note: (itstool) path: td/p
en: "horizontal", "vertical", and "solid"
hr: "horizontal", "vertical", i "solid"

note: (itstool) path: td/p
en: How to shade the background color.
hr: Kako zasjeniti boju pozadine.

note: (itstool) path: td/p
en: Left or top color when drawing gradients, or the solid color.
hr: Lijeva ili gornja boja pri iscrtavanju gradijenata ili pune boje.

note: (itstool) path: td/p
en: Right or bottom color when drawing gradients, not used for solid color.
hr: Desna ili donja boja pri iscrtavanju gradijenata, ne koristi se za punu boju.

note: (itstool) path: item/p
en: You can view a complete list of <sys>org.gnome.desktop.background</sys> keys and possible values using <app>dconf-editor</app> or the <cmd>gsettings</cmd> command-line utility. See <link xref="gsettings-browse"/> for more information.
hr: Možete vidjeti potpuni popis <sys>org.gnome.desktop.background</sys> ključeva i mogućih vrijednosti koristeći <app>dconf-editor</app> ili <cmd>gsettings</cmd> pomagalo naredbenog retka . Pogledajte <link xref="gsettings-browse"/> za više informacija.

note: (itstool) path: item/p
en: Below is a sample <file><var>filename</var>.xml</file> file:
hr: Ispod je primjer <file><var>nazivdatoteke</var>.xml</file> datoteke:

note: (itstool) path: item/code
en: 
    &lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;!DOCTYPE wallpapers SYSTEM "gnome-wp-list.dtd"&gt;
    &lt;wallpapers&gt;
      &lt;wallpaper deleted="false"&gt;
        &lt;name&gt;Company Background&lt;/name&gt;
        &lt;name xml:lang="de"&gt;Firmenhintergrund&lt;/name&gt;
        &lt;filename&gt;/usr/local/share/backgrounds/company-wallpaper.jpg&lt;/filename&gt;
        &lt;options&gt;zoom&lt;/options&gt;
        &lt;shade_type&gt;solid&lt;/shade_type&gt;
        &lt;pcolor&gt;#ffffff&lt;/pcolor&gt;
        &lt;scolor&gt;#000000&lt;/scolor&gt;
      &lt;/wallpaper&gt;
    &lt;/wallpapers&gt;
hr: 
    &lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;!DOCTYPE wallpapers SYSTEM "gnome-wp-list.dtd"&gt;
    &lt;wallpapers&gt;
      &lt;wallpaper deleted="false"&gt;
        &lt;name&gt;Company Background&lt;/name&gt;
        &lt;name xml:lang="de"&gt;Firmenhintergrund&lt;/name&gt;
        &lt;filename&gt;/usr/local/share/backgrounds/pozadina-tvrtke.jpg&lt;/filename&gt;
        &lt;options&gt;zoom&lt;/options&gt;
        &lt;shade_type&gt;solid&lt;/shade_type&gt;
        &lt;pcolor&gt;#ffffff&lt;/pcolor&gt;
        &lt;scolor&gt;#000000&lt;/scolor&gt;
      &lt;/wallpaper&gt;
    &lt;/wallpapers&gt;

note: (itstool) path: item/p
en: Place the <file><var>filename</var>.xml</file> file in the <file>/usr/share/gnome-background-properties/</file> directory.
hr: Smjestite datoteku <file><var>nazivdatoteke</var>.xml</file> u direktorij <file>/usr/share/gnome-background-properties/</file>.

note: (itstool) path: item/p
en: Users will have the extra backgrounds available for configuration from <guiseq><gui>Settings</gui> <gui>Background</gui></guiseq>.
hr: Korisnici će imati dodatne pozadine dostupne za podešavanje u postavkama <guiseq><gui>Izgled</gui> u odjeljku <gui>Pozadina</gui></guiseq>.

note: (itstool) path: section/title
en: Specify multiple backgrounds
hr: Navođenje više pozadina

note: (itstool) path: section/p
en: In one configuration file, you can specify multiple <code>&lt;wallpaper&gt;</code> elements to add more backgrounds.
hr: U jednoj datoteci podešavanja možete navesti više <code>&lt;wallpaper&gt;</code> elemenata za dodavanje više pozadina.

note: (itstool) path: section/p
en: See the following example with two <code>&lt;wallpaper&gt;</code> elements, adding two different backgrounds:
hr: Pogledajte sljedeći primjer s dva <code>&lt;wallpaper&gt;</code> elementa, dodajući dvije različite pozadine:

note: (itstool) path: section/code
en: 
    &lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;!DOCTYPE wallpapers SYSTEM "gnome-wp-list.dtd"&gt;
    &lt;wallpapers&gt;
      &lt;wallpaper deleted="false"&gt;
        &lt;name&gt;Company Background&lt;/name&gt;
        &lt;name xml:lang="de"&gt;Firmenhintergrund&lt;/name&gt;
        &lt;filename&gt;/usr/local/share/backgrounds/company-wallpaper.jpg&lt;/filename&gt;
        &lt;options&gt;zoom&lt;/options&gt;
        &lt;shade_type&gt;solid&lt;/shade_type&gt;
        &lt;pcolor&gt;#ffffff&lt;/pcolor&gt;
        &lt;scolor&gt;#000000&lt;/scolor&gt;
      &lt;/wallpaper&gt;
      &lt;wallpaper deleted="false"&gt;
        &lt;name&gt;Company Background 2&lt;/name&gt;
        &lt;name xml:lang="de"&gt;Firmenhintergrund 2&lt;/name&gt;
        &lt;filename&gt;/usr/local/share/backgrounds/company-wallpaper-2.jpg&lt;/filename&gt;
        &lt;options&gt;zoom&lt;/options&gt;
        &lt;shade_type&gt;solid&lt;/shade_type&gt;
        &lt;pcolor&gt;#ff0000&lt;/pcolor&gt;
        &lt;scolor&gt;#00ffff&lt;/scolor&gt;
      &lt;/wallpaper&gt;
    &lt;/wallpapers&gt;
hr: 
    &lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;!DOCTYPE wallpapers SYSTEM "gnome-wp-list.dtd"&gt;
    &lt;wallpapers&gt;
      &lt;wallpaper deleted="false"&gt;
        &lt;name&gt;Company Background&lt;/name&gt;
        &lt;name xml:lang="de"&gt;Firmenhintergrund&lt;/name&gt;
        &lt;filename&gt;/usr/local/share/backgrounds/pozadina-tvrtke.jpg&lt;/filename&gt;
        &lt;options&gt;zoom&lt;/options&gt;
        &lt;shade_type&gt;solid&lt;/shade_type&gt;
        &lt;pcolor&gt;#ffffff&lt;/pcolor&gt;
        &lt;scolor&gt;#000000&lt;/scolor&gt;
      &lt;/wallpaper&gt;
      &lt;wallpaper deleted="false"&gt;
        &lt;name&gt;Company Background 2&lt;/name&gt;
        &lt;name xml:lang="de"&gt;Firmenhintergrund 2&lt;/name&gt;
        &lt;filename&gt;/usr/local/share/backgrounds/pozadina-tvrtke-2.jpg&lt;/filename&gt;
        &lt;options&gt;zoom&lt;/options&gt;
        &lt;shade_type&gt;solid&lt;/shade_type&gt;
        &lt;pcolor&gt;#ff0000&lt;/pcolor&gt;
        &lt;scolor&gt;#00ffff&lt;/scolor&gt;
      &lt;/wallpaper&gt;
    &lt;/wallpapers&gt;

note: (itstool) path: info/desc
en: Set system-wide default settings using <_:sys-1/> profiles.
hr: Postavljanje zadanih postavki za cijeli sustav koristeći <_:sys-1/> profile.

note: (itstool) path: page/title
en: Custom default values for system settings
hr: Prilagođene zadane vrijednosti za postavke sustava

note: (itstool) path: page/p
en: System-wide default settings can be set by providing a default for a key in a <_:sys-1/> profile. These defaults can be overridden by the user.
hr: Zadane postavke za cijeli sustav mogu se postaviti davanjem zadane vrijednosti za ključ u <_:sys-1/> profilu. Korisnik može zaobići te zadane vrijednosti.

note: (itstool) path: section/title
en: Set a default value
hr: Postavljanje zadane postavke

note: (itstool) path: section/p
en: To set a default for a key, the <sys>user</sys> profile must exist and the value for the key must be added to a <_:sys-1/> database.
hr: Kako bi postavili zadanu vrijednost za ključ, <sys>korisnički</sys> profil mora postojati i vrijednost za ključ mora biti dodana <_:sys-1/> bazi podataka.

note: (itstool) path: steps/title
en: An example setting the default background
hr: Primjer postavljanja zadane pozadine

note: (itstool) path: item/p
en: Create the <_:file-1/> profile:
hr: Stvorite <_:file-1/> profil:

note: (itstool) path: item/p
en: <_:input-1/> is the name of a <_:sys-2/> database.
hr: <_:input-1/> je naziv <_:sys-2/> baze podataka.

note: (itstool) path: item/p
en: Create a <em>keyfile</em> for the <_:input-1/> database which contains the default settings:
hr: Stvorite <em>datoteku ključa</em> za <_:input-1/> bazu podataka koja sadrži zadane postavke:

note: (itstool) path: code/span
en: dconf path
hr: dconf putanja

note: (itstool) path: code/span
en: dconf key names and their corresponding values
hr: nazivi dconf ključeva i njihove odgovarajuće vrijednosti

note: (itstool) path: note/p
en: When the <_:sys-1/> profile is created or changed, the user will need to log out and log in again before the changes will be applied.
hr: Kada je <_:sys-1/> profil stvoren ili promijenjen, korisnik će se morati odjaviti i ponovno prijaviti kako bi se promjene primijene.

note: (itstool) path: section/p
en: If you want to avoid creating the <_:sys-1/> profile, you can use the <cmd>dconf</cmd> command-line utility to read and write individual values or entire directories from and to a <_:sys-2/> database. For more information, see the <_:link-3/> man page.
hr: Ako želite izbjeći stvaranje <_:sys-1/> profila , možete koristiti <cmd>dconf</cmd> pomagalo naredbenog retka za čitanje i pisanje pojedinačnih vrijednosti ili cijelih direktorija iz i u <_:sys-2/> bazu podataka. Za više informacija pogledajte <_:link-3/> stranicu priručnika.

note: (itstool) path: info/desc
en: Use <_:sys-1/> <em>keyfiles</em> to configure specific settings with a text editor.
hr: Koristite <_:sys-1/> <em>datoteke ključeva</em> za podešavanje određenih postavki pomoću uređivača teksta.

note: (itstool) path: page/title
en: Control system settings with keyfiles
hr: Upravljanje postavkama sustava pomoću datoteka ključeva

note: (itstool) path: page/p
en: System database files, located in <_:file-1/>, cannot be edited because they are written in GVDB format. In order to change system settings using a text editor, you can modify <em>keyfiles</em> found in <em>keyfile directories</em>. Each keyfile directory corresponds to a particular system database file, and has the same name as the database file with a “.d” extension appended (for example, <file>/etc/dconf/db/local.d</file>). All keyfile directories are found in <_:file-2/>, and each one contains keyfiles in a special format that can be compiled into the <_:sys-3/> database.
hr: Datoteke baze podataka sustava, koje se nalaze u <_:file-1/>, ne mogu se uređivati jer su napisane u GVDB formatu. Kako bi promijenili postavke sustava pomoću uređivača teksta, možete promijeniti <em>datoteke ključeva</em> sadržane u <em>direktorijima datoteka ključeva</em>. Svaki direktorij datoteke ključeva odgovara određenoj datoteci baze podataka sustava i ima isti naziv kao datoteka baze podataka s dodanim datotečnim proširenjem “.d” (primjerice, <file>/etc/dconf/db/local.d</file>) . Svi direktoriji datoteka ključeva nalaze se u <_:file-2/>, a svaki sadrži datoteke ključeva u posebnom formatu koji se mogu kompilirati u bazu podataka <_:sys-3/>.

note: (itstool) path: listing/title
en: A keyfile in this directory will look something like this:
hr: Datoteka ključa u ovom direktoriju izgledat će otprilike ovako:

note: (itstool) path: listing/code
en: 
    # Some useful default settings for our site
    
    [system/proxy/http]
    host='172.16.0.1'
    enabled=true
    
    [org/gnome/desktop/background]
    picture-uri='file:///usr/local/rupert-corp/company-wallpaper.jpeg'
hr: 
    # Određena korisna zadana postavka za našu stranicu
    
    [system/proxy/http]
    host='172.16.0.1'
    enabled=true
    
    [org/gnome/desktop/background]
    picture-uri='file:///usr/local/linux-zajednica/gnome-pozadina.jpeg'

note: (itstool) path: note/p
en: <cmd>dconf update</cmd> must be run whenever you modify a keyfile. When you do this, <_:sys-1/> compares the timestamp on a system database file with the timestamp on the corresponding keyfile directory. If the timestamp on the keyfile directory is more recent than the one on the database file, <_:sys-2/> regenerates the <code>system-db</code> file and sends a notification to the system <sys>D-Bus</sys>, which in turn notifies all running applications to reread their settings.
hr: <cmd>dconf nadopuna</cmd> mora se pokrenuti uvijek kada promijenite datoteku ključa. Kada to učinite, <_:sys-1/> uspoređuje vremensku oznaku u datoteci baze podataka sustava s vremenskom oznakom u odgovarajućem direktoriju datoteke ključa. Ako je vremenska oznaka u direktoriju datoteke ključa novija od one u datoteci baze podataka, <_:sys-2/> ponovno stvara <code>system-db</code> datoteku i šalje obavijest <sys>D-Busu</sys> sustava, koji zauzvrat obavještava sve pokrenute aplikacije da ponovno pročitaju svoje postavke.

note: (itstool) path: page/p
en: The group name in the keyfile references a <link href="https://developer.gnome.org/GSettings/">GSettings schema ID</link>. For example, <code>org/gnome/desktop/background</code> references the schema <code>org.gnome.desktop.background</code>, which contains the key <code>picture-uri</code>.
hr: Naziv grupe u ključnoj datoteci upućuje na <link href="https://developer.gnome.org/GSettings/">GSettings ID sheme</link>. Primjerice, <code>org/gnome/desktop/background</code> upućuje na shemu <code>org.gnome.desktop.background</code>, koja sadrži ključ <code>picture-uri</code>.

note: (itstool) path: page/p
en: The values under a group are expected in <link href="https://developer.gnome.org/glib/stable/gvariant-text.html">serialized GVariant form</link>.
hr: Vrijednosti unutar grupe očekuju se u <link href="https://developer.gnome.org/glib/stable/gvariant-text.html">serializiranom GVariant obliku</link>.

note: (itstool) path: info/desc
en: Use the <em>lockdown</em> mode in <_:sys-1/> to prevent users from changing specific settings.
hr: Koristite način <em>zaključavanja</em> u <_:sys-1/> pomagalu kako bi spriječili korisnike u mijenjaju određene postavke.

note: (itstool) path: page/title
en: Lock down specific settings
hr: Zaključavanje određene postavke

note: (itstool) path: page/p
en: By using the lockdown mode in dconf, you can prevent users from changing specific settings. Without locking down the system settings, user settings take precedence over the system settings.
hr: Korištenjem načina zaključavanja u dconf pomagalu, možete spriječiti korisnike u mijenjaju određene postavke. Bez zaključavanja postavki sustava, korisničke postavke imaju prednost nad postavkama sustava.

note: (itstool) path: page/p
en: To <em>lock down</em> a <_:sys-1/> key or subpath, you will need to create a <_:file-2/> subdirectory in the keyfile directory. The files inside this directory contain a list of keys or subpaths to lock. Just as with the <link xref="dconf-keyfiles">keyfiles</link>, you may add any number of files to this directory.
hr: Za <em>zaključavanje</em> <_:sys-1/> ključa ili podputanje, morat ćete stvoriti poddirektorij <_:file-2/> u direktoriju datoteke ključa. Datoteke unutar ovog direktorija sadrže popis ključeva ili podputanje za zaključavanje. Kao i kod <link xref="dconf-keyfiles">datoteka ključeva</link>, u ovaj direktorij možete dodati bilo koji broj datoteka.

note: (itstool) path: steps/title
en: Lock a setting
hr: Zaključavanje postavke

note: (itstool) path: item/p
en: Before you can lock down a key or subpath, you need to set it. This example shows how to lock <link xref="desktop-background">a background setting</link> once it has been set.
hr: Prije nego što možete zaključati ključ ili podputanju, morate ga postaviti. Ovaj primjer pokazuje kako zaključati <link xref="desktop-background">postavku pozadine</link> nakon što je postavljena.

note: (itstool) path: item/p
en: At this point, you should have <link xref="dconf-profiles">a <sys>user</sys> profile</link> and <link xref="dconf-keyfiles">a keyfile</link> with the settings that you want to lock down.
hr: U ovom trenutku, trebali bi imati <link xref="dconf-profiles"><sys>korisnički</sys> profil</link> i <link xref="dconf-keyfiles">datoteku ključa</link> s postavkama koje želite zaključati.

note: (itstool) path: item/p
en: Create a directory named <_:file-1/>.
hr: Stvorite direktorij naziva <_:file-1/>.

note: (itstool) path: item/p
en: Create a file in the <_:file-1/> directory and list one key or subpath per line. For example, create <_:file-2/>:
hr: Stvorite datoteku u direktoriju <_:file-1/> i navedite jedan ključ ili podputanju po retku. Primjerice, stvorite <_:file-2/>:

note: (itstool) path: code/span
en: prevent changes to the background
hr: spriječi promjene pozadine

note: (itstool) path: info/desc
en: Update the system configuration for <sys>dconf</sys> to store settings in an <sys>NFS</sys> home directory.
hr: Nadopuna podešavanja sustava za <sys>dconf</sys> kako bi se pohranile postavke u <sys>NFS</sys> osobni direktorij.

note: (itstool) path: page/title
en: Store settings over <sys>NFS</sys>
hr: Pohrana postavki putem <sys>NFS-a</sys>

note: (itstool) path: page/p
en: For <_:sys-1/> to work correctly when using <sys>Network File System</sys> (<sys>NFS</sys>) home directories, the <_:sys-2/> <em>keyfile back end</em> must be used.
hr: Kako bi <_:sys-1/> ispravno radio pri korištenju <sys>Mrežnog datotečnog sustava</sys> (<sys>NFS</sys>) osobnih direktorija, <_:sys-2/> <em>pozadinska datoteka ključa </em>mora se koristiti.

note: (itstool) path: item/p
en: Create or edit the <_:file-1/> file on every client.
hr: Stvorite ili uredite <_:file-1/> datoteku na svakom klijentu.

note: (itstool) path: item/p
en: At the very beginning of this file, add the following line:
hr: Na samom početku ove datoteke, dodajte sljedeći redak:

note: (itstool) path: page/p
en: The <_:sys-1/> <em>keyfile back end</em> will only take effect the next time that the user logs in. It polls the keyfile to determine whether updates have been made, so settings may not be updated immediately.
hr: <_:sys-1/> <em>pozadinska datoteka ključa</em> će se primijeniti kada se korisnik prijavi sljedeći puta. Ispituje datoteku ključa kako bi utvrdio jesu li napravljene nadopune, stoga postavke možda neće biti odmah nadopunjene.

note: (itstool) path: page/p
en: If a <em>keyfile back end</em> is not used, the user settings may not be retrieved or updated correctly.
hr: Ako se <em>pozadinska datoteka ključa</em> ne koristi, postavke korisnika se možda neće ispravno primijeniti ili nadopuniti.

note: (itstool) path: info/desc
en: What is <sys>dconf</sys>? How can it be used to edit configurations?
hr: Što je <sys>dconf</sys>? Kako se koristiti za uređivanje podešavanja?

note: (itstool) path: page/title
en: Manage user and system settings with dconf
hr: Upravljanje korisničkim i postavkama sustava pomoću dconf pomagala

note: (itstool) path: page/p
en: <sys>dconf</sys> is one of the main configuration utilities in GNOME. Its purpose is to help you set and manage GNOME system and application settings.
hr: <sys>dconf</sys> je jedan od glavnih pomagala podešavanja u GNOMU. Njegova je svrha pomoć u postavljanju i upravljanju postavkama GNOME sustava i aplikacija.

note: (itstool) path: page/p
en: To give you an idea of the power of <sys>dconf</sys> within GNOME, a <sys>dconf</sys> key exists for most every setting that a user can click on in the GNOME desktop or in any GNOME application. In addition to this, there are some system and application settings that cannot even be changed from within the user interface, but which <em>can</em> be changed by using <sys>dconf</sys>.
hr: Kako bi vam dali predodžbu o moći <sys>dconf</sys> pomagala unutar GNOMA, <sys>dconf</sys> ključ postoji za gotovo svaku postavku koju korisnik može kliknuti na GNOME radnoj površini ili u bilo kojoj GNOME aplikaciji. Uz ovo, postoje neke postavke sustava i aplikacija koje se čak ne mogu promijeniti unutar korisničkog sučelja, ali koje se <em>mogu</em> promijeniti pomoću <sys>dconf</sys> pomagala.

note: (itstool) path: page/p
en: As an administrator, this means that knowing how to use <sys>dconf</sys> will help you to customize GNOME and GNOME-based applications to best suit the needs of your particular environment.
hr: Kao administratoru, to će vam znanje o korištenju <sys>dconf</sys> pomagala pomoći u prilagodbi GNOMA i aplikacija temeljenih na GNOMU kako bi najbolje odgovarale potrebama vašeg okruženja.

note: (itstool) path: page/p
en: Users can override the customized defaults with their own settings, unless the administrator locks these defaults to prevent overriding.
hr: Korisnici mogu zaobići prilagođene zadane vrijednosti vlastitim postavkama, osim ako administrator ne zaključa te zadane postavke kako bi spriječio zaobilaženje.

note: (itstool) path: info/desc
en: Detailed information about profile and profile selection.
hr: Opširnije informacije o profilu i odabiru profila.

note: (itstool) path: page/title
en: Profiles
hr: Profili

note: (itstool) path: page/p
en: A <em>profile</em> is a list of configuration databases. The first database in a profile is the write-to database and the remaining databases are read-only. Each of the system databases is generated from a keyfile directory. Each keyfile directory contains one or more keyfiles. Each keyfile contains at least one dconf path and one or more keys and the corresponding values.
hr: <em>Profil</em> je popis baza podataka podešavanja. Prva baza podataka u profilu je baza podataka za pisanje, a ostale baze podataka su samo za čitanje. Svaka baza podataka sustava stvorena je iz direktorija datoteke ključa. Svaki direktorij datoteke ključa sadrži jednu ili više datoteka ključa. Svaka datoteka ključa sadrži barem jednu dconf putanju i jedan ili više ključeva i odgovarajuće vrijednosti.

note: (itstool) path: page/p
en: Key pairs which are set in a <sys>dconf</sys> <em>profile</em> will override the default settings unless there is a problem with the value that you have set.
hr: Parovi ključeva koji su postavljeni u <sys>dconf</sys> <em>profilu</em> zaobići će zadane postavke osim ako postoji problem s vrijednošću koju ste postavili.

note: (itstool) path: page/p
en: You will usually want your <sys>dconf</sys> profile to consist of a <em>user database</em> and at least one system database. The profile must list one database per line.
hr: Ubičajeno ćete željeti da se vaš <sys>dconf</sys> profil sastoji od <em>baze podataka korisnika</em> i najmanje jedne baze podataka sustava. Profil mora navoditi jednu bazu podataka po retku.

note: (itstool) path: page/p
en: The first line in a profile is the database that changes are written to. It is usually <code>user-db:<input>user</input></code>. <input>user</input> is the name of the user database which can normally be found in <file>~/.config/dconf</file>.
hr: Prvi redak u profilu je baza podataka u koju se upisuju promjene. uobičajeno je <code>user-db:<input>user</input></code>. <input>user</input> je naziv baze podataka korisnika koja se ubičajeno može pronaći u <file>~/.config/dconf</file>.

note: (itstool) path: page/p
en: A <code>system-db</code> line specifies a system database. These databases are found in <file>/etc/dconf/db/</file>.
hr: Redak <code>system-db</code> navodi bazu podataka sustava. Ove baze podataka nalaze se u <file>/etc/dconf/db/</file>.

note: (itstool) path: listing/title
en: Sample profile
hr: Primjerak profila

note: (itstool) path: page/p
en: Configuring a single user and multiple system databases allows for layering of preferences. Settings from the <code>user</code> database file take precedence over the settings in the <code>local</code> database file, and the <code>local</code> database file in turn takes precedence over the <code>site</code> database file.
hr: Podešavanje jednog korisnika i višestrukih baza podataka sustava omogućuje slojevitost osobitosti. Postavke iz <code>user</code> datoteke baze podataka imaju prednost nad postavkama u <code>local</code> datoteci baze podataka, a <code>local</code> datoteka baze podataka zauzvrat ima prednost nad <code>site</code> datotekom baze podataka.

note: (itstool) path: page/p
en: However, the order of precedence for <link xref="dconf-lockdown">locks</link> is reversed. Locks introduced in the <code>site</code> or <code>local</code> database files take priority over those present in <code>user</code>.
hr: Ipak, redoslijed prednosti za <link xref="dconf-lockdown">zaključavanja</link> je obrnut. Zaključavanja uvedena u <code>site</code> ili <code>local</code> datoteke baze podataka imaju prednost nad onima prisutnima u <code>user</code>.

note: (itstool) path: note/p
en: The <sys>dconf</sys> profile for a session is determined at login, so users will have to log out and log in to apply a new <sys>dconf</sys> user profile to their session.
hr: Profil <sys>dconf</sys> za sesiju se određuje prilikom prijave, stoga će se korisnici morati odjaviti i ponovno prijaviti kako bi primijenili novi <sys>dconf</sys> korisnički profil na svoju sesiju.

note: (itstool) path: page/p (itstool) path: section/p
en: For more information, see the <_:link-1/> man page.
hr: Za više informacija, pogledajte <_:link-1/> stranicu priručnika.

note: (itstool) path: section/title
en: Select a profile
hr: Odabir profila

note: (itstool) path: section/p
en: On startup, <sys>dconf</sys> consults the <sys>DCONF_PROFILE</sys> environment variable. The variable can specify a relative path to a file in <file>/etc/dconf/profile/</file>, or an absolute path, for example, to the user's home directory.
hr: Pri pokretanju, <sys>dconf</sys> konzultira <sys>DCONF_PROFILE</sys> varijablu okruženja. Varijabla može odrediti relativnu putanju do datoteke u <file>/etc/dconf/profile/</file> ili apsolutni putanju, primjerice, do korisničkog osobnog direktorija.

note: (itstool) path: section/p
en: If the environment variable is set, <sys>dconf</sys> attempts to open the named profile and aborts if that fails. If the variable is not set, <sys>dconf</sys> attempts to open the profile named “user”. If that fails, it will fall back to an internal hard-wired configuration.
hr: Ako je postavljena varijabla okruženja, <sys>dconf</sys> pokušava otvoriti navedeni profil i prekida ako to ne uspije. Ako varijabla nije postavljena, <sys>dconf</sys> pokušava otvoriti profil pod nazivom “user”. Ako to ne uspije, vratit će se na unutarnje nepromjenjivo podešavanje.

note: (itstool) path: item/p
en: Create the <_:file-1/> profile which contains the following lines:
hr: Stvorite <_:file-1/> profil koji sadrži sljedeće retke:

note: (itstool) path: item/p
en: Create the directory <_:file-1/> if it does not already exist.
hr: Stvorite direktorij <_:file-1/> ako već ne postoji.

note: (itstool) path: item/p
en: Update the system databases:
hr: Nadopunite bazu podataka sustava:

note: (itstool) path: item/p
en: Users must log out and back in again before the system-wide settings take effect.
hr: Korisnici se moraju odjaviti i ponovno prijaviti kako bi se primijenile postavke za cijeli sustav.

note: (itstool) path: revision/desc
en: All prose and instructions are up to par. Extra info needs to be provided on picture options, per comment below. --shaunm
hr: Sve proze i upute su na nivou. Potrebno je navesti dodatne informacije o mogućnostima slike, po komentaru ispod. --shaunm

note: (itstool) path: info/desc
en: Change the default desktop background for all users.
hr: Promjena zadane pozadine radne površine za sve korisnike.

note: (itstool) path: page/title
en: Set custom background
hr: Postavljanje prilagođene pozadine

note: (itstool) path: page/p
en: You can change the default desktop background to one that you want to use. For example, you may want to use a background with your company or university logo instead of the default GNOME background.
hr: Zadanu pozadinu radne površine možete promijeniti u onu koju želite koristiti. Primjerice, možda želite koristiti pozadinu s logotipom vaše tvrtke ili sveučilišta umjesto zadane GNOME pozadine.

note: (itstool) path: steps/title
en: Set the default background
hr: Postavljanje zadane pozadine

note: (itstool) path: item/p
en: Create the key file <file>/etc/dconf/db/local.d/00-background</file> to provide information for the <sys>local</sys> database.
hr: Stvorite datoteku ključa <file>/etc/dconf/db/local.d/00-background</file> kako bi pružili informacija za <sys>lokalnu</sys> bazu podataka.

note: (itstool) path: listing/code
en: 
    # Specify the dconf path
    [org/gnome/desktop/background]
    
    # Specify the path to the desktop background image file
    picture-uri='file:///usr/local/share/backgrounds/wallpaper.jpg'
    
    # Specify one of the rendering options for the background image:
    picture-options='scaled'
    
    # Specify the left or top color when drawing gradients, or the solid color
    primary-color='000000'
    
    # Specify the right or bottom color when drawing gradients
    secondary-color='FFFFFF'
hr: 
    # Navedi dconf putanju
    [org/gnome/desktop/background]
    
    # Navedi putanju do datoteke slike pozadine radne površine
    picture-uri='file:///usr/local/share/backgrounds/pozadina.jpg'
    
    # Navedi jednu od mogućnosti prikazivanja slike pozadine:
    picture-options='scaled'
    
    # Navedi lijevu ili gornju boju pri iscrtavanju gradijenta ili pune boje
    primary-color='000000'
    
    # Navedi desnu ili donju boju pri iscrtavanju gradijenata
    secondary-color='FFFFFF'

note: (itstool) path: item/p
en: To prevent the user from overriding these settings, create the file <file>/etc/dconf/db/local.d/locks/background</file> with the following content:
hr: Kako bi spriječili korisnika da zaobiđe ove postavke, stvorite datoteku <file>/etc/dconf/db/local.d/locks/secondary-color</file> sa sljedećim sadržajem:

note: (itstool) path: listing/code
en: 
    # Lock desktop background settings
    /org/gnome/desktop/background/picture-uri
    /org/gnome/desktop/background/picture-options
    /org/gnome/desktop/background/primary-color
    /org/gnome/desktop/background/secondary-color
hr: 
    # Zaključavanje postavki pozadine radne površine
    /org/gnome/desktop/background/picture-uri
    /org/gnome/desktop/background/picture-options
    /org/gnome/desktop/background/primary-color
    /org/gnome/desktop/background/secondary-color

note: (itstool) path: info/desc
en: Customize the default favorites in the Activities overview.
hr: Prilagodba zadanih omiljenih aplikacija u aktivnosti pregledu.

note: (itstool) path: page/title
en: Set default favorite applications
hr: Postavljanje zadane omiljene aplikacije

note: (itstool) path: page/p
en: Favorite applications are those visible on the GNOME Shell <link href="help:gnome-help/shell-introduction#activities">dash</link>. You can use <_:sys-1/> to set favorite applications for one user, or to set the same favorite applications for all users. For both cases, you must first edit the <_:sys-2/> profile found in <_:file-3/>.
hr: Omiljene aplikacije su one vidljive na <link href="help:gnome-help/shell-introduction#activities">pokretaču</link> GNOME ljuske. Možete koristiti <_:sys-1/> za postavljanje omiljenih aplikacija pojedinog korisnika ili za postavljanje istih omiljenih aplikacija za sve korisnike. U oba slučaja, prvo morate urediti <_:sys-2/> profil koji se nalazi u <_:file-3/>.

note: (itstool) path: section/title
en: Set different favorite applications for different users
hr: Postavljanje različitih omiljenih aplikacija za različite korisnike

note: (itstool) path: section/p
en: You can set the default favorite applications for each user by modifying their user database file found in <_:file-1/>. The following example snippet uses <_:sys-2/> to set <app>gedit</app>, <app>Terminal</app> and <app>Files</app> (<sys>nautilus</sys>) as default favorites for a user. The example code allows users to modify the list later, if they wish to do so.
hr: Možete postaviti zadane omiljene aplikacije za pojedinog korisnika promjenom njihove korisničke baze podataka u <_:file-1/>. Sljedeći primjer isječka koristi <_:sys-2/> za postavljanje <app>gedit</app>, <app>Terminal</app> i <app>Datoteke</app> (<sys>nautilus</sys> ) kao zadane omiljene aplikacije za korisnika. Primjer kôda omogućuje korisnicima da kasnije promijene popis, ako to žele.

note: (itstool) path: listing/title
en: Contents of <_:file-1/>:
hr: Sadržaj u <_:file-1/>:

note: (itstool) path: code/span
en: This line allows the user to change the default favorites later
hr: Ovaj redak omogućuje korisniku kasniju promjenu zadane omiljene aplikacije

note: (itstool) path: code/span
en: Set gedit, terminal and nautilus as default favorites
hr: Postavi gedit, terminal i nautilus kao omiljene aplikacije

note: (itstool) path: note/p
en: You can also <link xref="dconf-lockdown">lock down</link> the above settings to prevent users from changing them.
hr: Možete <link xref="dconf-lockdown">zaključati</link> gornje postavke kako bi spriječili korisnike da ih mijenjaju.

note: (itstool) path: section/title
en: Set the same favorite applications for all users
hr: Postavljanje iste omiljene aplikacije za sve korisnike

note: (itstool) path: section/p
en: In order to have the same favorites for all users, you must modify system database files using <link xref="dconf-keyfiles">dconf keyfiles</link>. The following steps edit the <_:sys-1/> profile and then create a keyfile to set default favorite applications for all users in the <code>local</code> configuration database.
hr: Kako bi imali iste omiljene aplikacije za sve korisnike, morate promijeniti datoteke baze podataka sustava koristeći <link xref="dconf-keyfiles">dconf datoteke ključeva</link>. Sljedeći koraci uređuju <_:sys-1/> profil i zatim stvaraju datoteku ključa za postavljanje zadanih omiljenih aplikacija za sve korisnike u <code>local</code> bazi podataka podešavanja.

note: (itstool) path: steps/title
en: Set the favorite applications
hr: Postavljanje omiljenih aplikacija

note: (itstool) path: item/p
en: Create the key file <file>/etc/dconf/db/local.d/00-favorite-apps</file> to provide information for the <sys>local</sys> database.
hr: Stvorite datoteku ključa <file>/etc/dconf/db/local.d/00-favorite-apps</file> kako bi pružili informacija za <sys>lokalnu</sys> bazu podataka.

note: (itstool) path: listing/code
en: 
    # Snippet sets gedit, terminal and nautilus as default favorites for all users
    [org/gnome/shell]
    favorite-apps = [<var>'gedit.desktop'</var>, <var>'gnome-terminal.desktop'</var>, <var>'nautilus.desktop'</var>]
hr: 
    # Isječak postavlja gedit, terminal i nautilus kao zadane omiljene aplikacije za sve korisnike
    [org/gnome/shell]
    favorite-apps = [<var>'gedit.desktop'</var>, <var>'gnome-terminal.desktop'</var>, <var>'nautilus.desktop'</var>]

note: (itstool) path: item/p
en: To prevent the user from overriding these settings, create the file <file>/etc/dconf/db/local.d/locks/favorite-apps</file> with the following content:
hr: Kako bi spriječili korisnika da zaobiđe ove postavke, stvorite datoteku <file>/etc/dconf/db/local.d/locks/favorite-apps</file> sa sljedećim sadržajem:

note: (itstool) path: listing/code
en: 
    # Lock default favorite applications
    /org/gnome/shell/favorite-apps
hr: 
    # Zaključavanje zadanih omiljenih aplikacija
    /org/gnome/shell/favorite-apps

note: (itstool) path: info/desc
en: Make the screen automatically lock, so the user must enter a password after being idle.
hr: Automatsko zaključavanje zaslona, tako da korisnik mora upisati lozinku nakon mirovanja.

note: (itstool) path: page/title
en: Lock the screen when the user is idle
hr: Zaključavanje zaslona kada je korisnik neaktivan

note: (itstool) path: page/p
en: You can make the screen lock automatically whenever the user is idle for some amount of time. This is useful if users may leave their computers unattended in public or unsecure locations.
hr: Možete postaviti automatsko zaključavanje zaslona kada je korisnik određeno vrijeme neaktivan. Ovo je korisno ako korisnici ostavljaju svoja računala bez nadzora na javnim ili nesigurnim mjestima.

note: (itstool) path: steps/title
en: Enable automatic screen lock
hr: Omogućavanje automatskog zaključavanja zaslona

note: (itstool) path: item/p
en: Create the key file <file>/etc/dconf/db/local.d/00-screensaver</file> to provide information for the <sys>local</sys> database.
hr: Stvorite datoteku ključa <file>/etc/dconf/db/local.d/00-screensaver</file> kako bi pružili informacija za <sys>lokalnu</sys> bazu podataka.

note: (itstool) path: listing/code
en: 
    # Specify the dconf path
    [org/gnome/desktop/session]
    
    # Number of seconds of inactivity before the screen goes blank
    # Set to 0 seconds if you want to deactivate the screensaver.
    idle-delay=uint32 180
    
    # Specify the dconf path
    [org/gnome/desktop/screensaver]
    
    # Number of seconds after the screen is blank before locking the screen
    lock-delay=uint32 0
hr: 
    # Navedi dconf putanju
    [org/gnome/desktop/session]
    
    # Broj sekundi neaktivnosti prije nego što se zaslon zatamni
    # Postavite na 0 sekundi ako želite deaktivirati čuvara zaslona.
    idle-delay=uint32 180
    
    # Navedi dconf putanju
    [org/gnome/desktop/screensaver]
    
    # Broj sekundi nakon što se zaslon zatamni prije zaključavanja zaslona
    lock-delay=uint32 0

note: (itstool) path: item/p
en: You must include the <code>uint32</code> along with the integer key values as shown.
hr: Morate uključiti <code>uint32</code> zajedno s vrijednostima ključa cijelog broja kao što je prikazano.

note: (itstool) path: item/p
en: To prevent the user from overriding these settings, create the file <file>/etc/dconf/db/local.d/locks/screensaver</file> with the following content:
hr: Kako bi spriječili korisnika da zaobiđe ove postavke, stvorite datoteku <file>/etc/dconf/db/local.d/locks/screensaver</file> sa sljedećim sadržajem:

note: (itstool) path: listing/code
en: 
    # Lock desktop screensaver settings
    /org/gnome/desktop/session/idle-delay
    /org/gnome/desktop/screensaver/lock-delay
hr: 
    # Zaključaj postavke čuvara zaslona radne površine
    /org/gnome/desktop/session/idle-delay
    /org/gnome/desktop/screensaver/lock-delay

note: (itstool) path: info/desc
en: Change the background of the lock screen shield.
hr: Promjena pozadine zavjese zaključanog zaslona.

note: (itstool) path: page/title
en: Change the lock screen shield
hr: Promjena zavjese zaključanog zaslona

note: (itstool) path: page/p
en: The <em>lock screen shield</em> is the screen that quickly slides down when the system is locked. The background of the lock screen shield is controlled by the <sys>org.gnome.desktop.screensaver.picture-uri</sys> GSettings key. Since <sys>GDM</sys> uses its own <sys>dconf</sys> profile, you can set the default background by changing the settings in that profile.
hr: <em>Zavjesa zaključanog zaslona</em> je zaslon koji brzo klizi prema dolje kada je sustav zaključan. Pozadinom zavjese zaključanog zaslona upravlja <sys>org.gnome.desktop.screensaver.picture-uri</sys> GSettings ključ. Budući da <sys>GDM</sys> koristi vlastiti <sys>dconf</sys> profil, možete postaviti zadanu pozadinu promjenom postavki u tom profilu.

note: (itstool) path: steps/title
en: Set the org.gnome.desktop.screensaver.picture-uri key
hr: Postavljanje the org.gnome.desktop.screensaver.picture-uri ključa

note: (itstool) path: item/p
en: Create a <sys>gdm</sys> database for machine-wide settings in <file>/etc/dconf/db/gdm.d/<var>01-screensaver</var></file>:
hr: Stvorite <sys>gdm</sys> bazu podataka za postavke cijelog sustava u <file>/etc/dconf/db/gdm.d/<var>01-screensaver</var></file>:

note: (itstool) path: item/code
en: [org/gnome/desktop/screensaver]
    picture-uri='file://<var>/opt/corp/background.jpg</var>'
hr: [org/gnome/desktop/screensaver]
    picture-uri='file://<var>/opt/corp/pozadina.jpg</var>'

note: (itstool) path: item/p
en: Replace <var>/opt/corp/background.jpg</var> with the path to the image file you want to use as the lock screen background.
hr: Zamijenite <var>/opt/corp/pozadina.jpg</var> putanjom do datoteke slike koju želite koristiti kao pozadinu zaključanog zaslona.

note: (itstool) path: item/p
en: Supported formats are PNG, JPG, JPEG, and TGA. The image will be scaled if necessary to fit the screen.
hr: Podržani formati su PNG, JPG, JPEG i TGA. Slika će biti po potrebi prilagođena na veličinu zaslona.

note: (itstool) path: item/p
en: You must log out before the system-wide settings take effect.
hr: Morate se odjaviti kako bi se postavke za cijeli sustav primijenile.

note: (itstool) path: page/p
en: Next time you lock the screen, the new lock screen shield will show in the background. In the foreground, time, date and the current day of the week will be displayed.
hr: Sljedeći puta kada zaključate zaslon, nova zavjesa će se prikazati u pozadini zaključanog zaslona. U prvom planu bit će prikazani vrijeme, datum i trenutni dan u tjednu i obavijesti.

note: (itstool) path: section/title
en: What if the background does not update?
hr: Što ako se pozadina ne nadopuni?

note: (itstool) path: section/p
en: Make sure that you have run the <_:cmd-1/> command to update the system databases.
hr: Provjerite jeste li pokrenuli naredbu <_:cmd-1/> za nadopunu baza podataka sustava.

note: (itstool) path: section/p
en: In case the background does not update, try restarting <sys>GDM</sys>.
hr: U slučaju da se pozadina ne nadopuni, pokušajte ponovno pokrenuti <sys>GDM</sys>.

note: (itstool) path: info/desc
en: Enable GNOME Shell extensions for all users.
hr: Omogućavanje proširenja GNOME ljuske za sve korisnike.

note: (itstool) path: page/title
en: Enable machine-wide extensions
hr: Omogućavanje proširenja na cijelom sustavu

note: (itstool) path: page/p
en: To make extensions available to all users on the system, install them in the <file>/usr/share/gnome-shell/extensions</file> directory. Note that newly-installed machine-wide extensions are disabled by default.
hr: Kako bi proširenja bila dostupna svim korisnicima sustava, instalirajte ih u direktorij <file>/usr/share/gnome-shell/extensions</file>. Zapamtite da su novoinstalirana proširenja za cijeli sustav onemogućena po zadanome.

note: (itstool) path: page/p
en: You need to set the <code>org.gnome.shell.enabled-extensions</code> key in order to set the default enabled extensions. However, there is currently no way to enable additional extensions for users who have already logged in. This does not apply for existing users who have installed and enabled their own GNOME extensions.
hr: Morate postaviti <code>org.gnome.shell.enabled-extensions</code> ključ kako bi postavili zadano omogućena proširenja. Ipak, još ne postoji način za omogućavanje dodatnih proširenja trenutno prijavljenih korisnika. Ovo se ne odnosi na postojeće korisnike koji su instalirali i omogućili vlastita GNOME proširenja.

note: (itstool) path: steps/title
en: Setting the org.gnome.shell.enabled-extensions key
hr: Postavljanje org.gnome.shell.enabled-extensions ključa

note: (itstool) path: item/p
en: Create a <code>user</code> profile in <file>/etc/dconf/profile/user</file>:
hr: Stvorite <code>user</code> profil u <file>/etc/dconf/profile/user</file>:

note: (itstool) path: item/p
en: Create a <code>local</code> database for machine-wide settings in <file>/etc/dconf/db/local.d/00-extensions</file>:
hr: Stvorite <code>local</code> bazu podataka za postavke na cijelom sustavu u <file>/etc/dconf/db/local.d/00-extensions</file>:

note: (itstool) path: listing/code
en: 
    [org/gnome/shell]
    # List all extensions that you want to have enabled for all users
    enabled-extensions=['<input>myextension1@myname.example.com</input>', '<input>myextension2@myname.example.com</input>']
hr: 
    [org/gnome/shell]
    # Navedi sva proširenja koje želite omogućiti za sve korisnike
    enabled-extensions=['<input>mojeproširenje1@mojeime.primjer.com</input>', '<input>mojeproširenje2@mojeime.primjer.com</input>']

note: (itstool) path: item/p
en: The <code>enabled-extensions</code> key specifies the enabled extensions using the extensions’ uuid (<code>myextension1@myname.example.com</code> and <code>myextension2@myname.example.com</code>).
hr: Ključ <code>enabled-extensions</code> navodi omogućena proširenja pomoću uuid-a proširenja (<code>mojeproširenje1@mojeime.primjer.com</code> i <code>mojeproširenje2@mojeime.primjer.com</code >).

note: (itstool) path: info/desc
en: Disallow the user to enable or disable GNOME Shell extensions.
hr: Sprječavanje korisniku u omogućavanju ili onemogućavanju proširenja GNOME ljuske.

note: (itstool) path: page/title
en: Lock down enabled extensions
hr: Zaključavanje omogućenih proširenja

note: (itstool) path: page/p
en: In GNOME Shell, you can prevent the user from enabling or disabling extensions by locking down the <code>org.gnome.shell.enabled-extensions</code> and <code>org.gnome.shell.development-tools</code> keys. This allows you to provide a set of extensions that the user has to use.
hr: U GNOME ljusci možete spriječiti korisnika da omogući ili onemogući proširenja zaključavanjem <code>org.gnome.shell.enabled-extensions</code> i <code>org.gnome.shell.development-tools</code > ključeva. To vam omogućuje da pružite skup proširenja koje korisnik mora koristiti.

note: (itstool) path: page/p
en: Locking down the <code>org.gnome.shell.development-tools</code> key ensures that the user cannot use GNOME Shell’s integrated debugger and inspector tool (<app>Looking Glass</app>) to disable any mandatory extensions.
hr: Zaključavanje <code>org.gnome.shell.development-tools</code> ključa osigurava da korisnik ne može koristiti integrirani alat ispravljanja grešaka i alat inspekcije GNOME ljuske (<app>Looking Glass</app>) za onemogućavanje bilo kojeg obveznog proširenja.

note: (itstool) path: steps/title
en: Lock down the org.gnome.shell.enabled-extensions and org.gnome.shell.development-tools keys
hr: Zaključavanje org.gnome.shell.enabled-extensions i org.gnome.shell.development-tools ključeva

note: (itstool) path: listing/code
en: 
    [org/gnome/shell]
    # List all extensions that you want to have enabled for all users
    enabled-extensions=['<input>myextension1@myname.example.com</input>', '<input>myextension2@myname.example.com</input>']
    # Disable access to Looking Glass
    development-tools=false
hr: 
    [org/gnome/shell]
    # Navedi sva proširenja koja treba omogućiti ili onemogućiti za sve korisnike
    enabled-extensions=['<input>myextension1@myname.example.com</input>', '<input>myextension2@myname.example.com</input>']
    # Onemogući pristup Looking Glassu
    development-tools=false

note: (itstool) path: item/p
en: The <code>development-tools</code> key is set to false to disable access to Looking Glass.
hr: Ključ <code>development-tools</code> postavljen je na laž kako bi se onemogućio pristup Looking Glassu.

note: (itstool) path: item/p
en: Override the user’s setting and prevent the user from changing it in <file>/etc/dconf/db/local.d/locks/extensions</file>:
hr: Zaobiđite korisničku postavku i spriječite korisnika da je promijeni u <file>/etc/dconf/db/local.d/locks/extensions</file>:

note: (itstool) path: listing/code
en: 
    # Lock the list of enabled extensions
    /org/gnome/shell/enabled-extensions
    /org/gnome/shell/disabled-extensions
    /org/gnome/shell/development-tools
hr: 
    # Zaključaj popis omogućenih proširenja
    /org/gnome/shell/enabled-extensions
    /org/gnome/shell/disabled-extensions
    /org/gnome/shell/development-tools

note: (itstool) path: page/p
en: After locking down the <code>org.gnome.shell.enabled-extensions</code> and <code>org.gnome.shell.development-tools</code> keys, any extensions installed in <file>~/.local/share/gnome-shell/extensions</file> or <file>/usr/share/gnome-shell/extensions</file> that are not listed in the <code>org.gnome.shell.enabled-extensions</code> key will not be loaded by GNOME Shell, thus preventing the user from using them.
hr: Nakon zaključavanja <code>org.gnome.shell.enabled-extensions</code> i <code>org.gnome.shell.development-tools</code> ključeva, sva proširenja instalirana u <file>~/.local /share/gnome-shell/extensions</file> ili <file>/usr/share/gnome-shell/extensions</file> koja nisu navedena u <code>org.gnome.shell.enabled-extensions</code> ključu neće biti učitana od strane GNOME ljuske, čime se korisnik sprječava da ih koristi.

note: (itstool) path: info/desc
en: GNOME Shell extensions allow customizing the default GNOME Shell interface.
hr: Proširenja GNOME ljuske omogućuju prilagodbu zadanog sučelja GNOME ljuske.

note: (itstool) path: page/title
en: What are GNOME Shell extensions?
hr: Što su proširenja GNOME ljuske?

note: (itstool) path: page/p
en: GNOME Shell extensions allow customizing the default GNOME Shell interface and its parts, such as window management and application launching.
hr: Proširenja GNOME ljuske omogućuju prilagodbu zadanog sučelja GNOME ljuske i njegovih dijelova, poput upravljanja prozorima i pokretanja aplikacija.

note: (itstool) path: page/p
en: Each GNOME Shell extension is identified by a unique identifier, the uuid. The uuid is also used for the name of the directory where an extension is installed. You can either install the extension per-user in <file>~/.local/share/gnome-shell/extensions/&lt;uuid&gt;</file>, or machine-wide in <file>/usr/share/gnome-shell/extensions/&lt;uuid&gt;</file>.
hr: Svako proširenje GNOME ljuske identificirano je jedinstvenim identifikatorom, uuid. uuid se još koristi za naziv direktorija u koji je instalirano proširenje. Proširenje možete instalirati po pojedinom korisniku u <file>~/.local/share/gnome-shell/extensions/&lt;uuid&gt;</file> ili za cijeli sustav u <file>/usr/share/gnome-shell/extensions/&lt;uuid&gt;</file>.

note: (itstool) path: page/p
en: To view installed extensions, you can use <app>Looking Glass</app>, GNOME Shell’s integrated debugger and inspector tool.
hr: Za prikaz instaliranih proširenja možete koristiti <app>Looking Glass</app>, integrirani alat otklanjanja grešaka GNOME ljuske.

note: (itstool) path: steps/title
en: View installed extensions
hr: Prikaz instaliranih proširenja

note: (itstool) path: item/p
en: Press <keyseq type="combo"><key>Alt</key><key>F2</key></keyseq>, type in <em>lg</em> and press <key>Enter</key> to open <app>Looking Glass</app>.
hr: Pritisnite <keyseq type="combo"><key>Alt</key><key>F2</key></keyseq> tipke, upišite <em>lg</em> i pritisnite <key>Enter</key> tipku za otvaranje <app>Looking Glass</app> alata.

note: (itstool) path: item/p
en: On the top bar of <app>Looking Glass</app>, click <gui>Extensions</gui> to open the list of installed extensions.
hr: Na gornjoj traci <app>Looking Glass</app> alata kliknite na <gui>Extensions</gui> za otvaranje popisa instaliranih proširenja.

note: (itstool) path: info/desc
en: Add extra fonts for all users.
hr: Dodavanje dodatnih slova za sve korisnike.

note: (itstool) path: page/title
en: Add an extra font for all users
hr: Dodavanje dodatnih slova za sve korisnike

note: (itstool) path: page/p
en: You can install an extra font which will be available to users in applications that use <sys>fontconfig</sys> for font handling.
hr: Možete instalirati dodatna slova koja će biti dostupna korisnicima u aplikacijama koje koriste <sys>fontconfig</sys> za rukovanje slovima.

note: (itstool) path: steps/title
en: Install an extra font
hr: Instalacija dodatnih slova

note: (itstool) path: item/p
en: Copy the font to the <file>/usr/local/share/fonts/</file> directory to install it.
hr: Kopirajte slovo u direktorij <file>/usr/local/share/fonts/</file> kako bi ga instalirali.

note: (itstool) path: item/p
en: You may need to run the following command to update the font cache:
hr: Možda ćete morati pokrenuti sljedeću naredbu za nadopunu predmemorije slova:

note: (itstool) path: page/p
en: You may need to restart running applications to see the changes. User sessions do not need to be restarted.
hr: Možda ćete morati ponovno pokrenuti pokrenute aplikacije kako bi vidjeli promjene. Korisničke sesije se ne moraju ponovno pokretati.

note: (itstool) path: page/p
en: Alternatively, you can also install fonts in another system directory than <file>/usr/local/share/fonts/</file> if that directory is listed in the <file>/etc/fonts/fonts.conf</file> file. If it is not, then you need to create your own machine-wide configuration file in <file>/etc/fonts/local.conf</file> containing the directory you want to use. See the <cmd>fonts-conf</cmd>(5) man page for more information.
hr: Alternativno, možete instalirati slova u drugi direktorij sustava osim <file>/usr/local/share/fonts/</file> ako je taj direktorij naveden u <file>/etc/fonts/fonts.conf</file> datoteci. Ako nije, tada morate stvoriti vlastitu datoteku podešavanja cijelog sustava u <file>/etc/fonts/local.conf</file> koja sadrži direktorij koji želite koristiti. Za više informacija pogledajte <cmd>fonts-conf</cmd>(5) stranicu priručnika.

note: (itstool) path: page/p
en: If you are using an alternative directory, remember to specify the directory name when updating the font cache with the <cmd>fc-cache</cmd> command:
hr: Ako koristite alternativni direktorij, ne zaboravite navesti naziv direktorija kada nadopunjavate predmemoriju slova pomoću <cmd>fc-cache</cmd> naredbe:

note: (itstool) path: page/screen
en: <output>$ </output><input>fc-cache <var>directory_name</var></input>
hr: <output>$ </output><input>fc-cache <var>naziv_direktorija</var></input>

note: (itstool) path: info/desc
en: Add extra fonts for individual users.
hr: Dodavanje dodatnih slova za pojedinačne korisnike.

note: (itstool) path: page/title
en: Add an extra font for individual users
hr: Dodavanje dodatnih slova za pojedinačne korisnike

note: (itstool) path: page/p
en: You can install an extra font which will be available to a specific user on your system in applications that use <sys>fontconfig</sys> for font handling.
hr: Možete instalirati dodatna slova koja će biti dostupna pojedinom korisniku na vašem sustavu u aplikacijama koje koriste <sys>fontconfig</sys> za rukovanje slovom.

note: (itstool) path: item/p
en: Copy the font to the <file>~/.local/share/fonts/</file> directory to install it.
hr: Kopirajte slovo u direktorij <file>~/.local/share/fonts/</file> kako bi ga instalirali.

note: (itstool) path: info/desc
en: What tool can I use to explore system and application settings?
hr: Koji alat se može koristiti za istraživanje postavki sustava i aplikacije?

note: (itstool) path: page/title
en: Browse GSettings values for your applications
hr: Pregledavanje GSettings vrijednosti aplikacija

note: (itstool) path: page/p
en: There are two tools you can use to browse system and application preferences stored as GSettings values, the <app>dconf-editor</app> graphical utility and the <cmd>gsettings</cmd> command line utility.
hr: Postoje dva alata koja možete koristiti za pregledavanje postavki sustava i aplikacija pohranjenih kao GSettings vrijednosti, <app>dconf-editor</app> grafičko pomagalo i <cmd>gsettings</cmd> pomagalo naredbenog retka.

note: (itstool) path: page/p
en: Both <app>dconf-editor</app> and <cmd>gsettings</cmd> also allows you to change preferences for the current user.
hr: I <app>dconf-editor</app> i <cmd>gsettings</cmd> omogućuju promjenu postavki za trenutnog korisnika.

note: (itstool) path: note/p
en: Note that these tools always operate using the current user's GSettings database, so you should not run these applications as root.
hr: Zapamtite da ovi alati uvijek rade koristeći GSettings bazu podataka trenutnog korisnika, stoga ne bi trebali pokretati ove aplikacije kao korijenski korisnik.

note: (itstool) path: note/p
en: Both <app>dconf-editor</app> and <cmd>gsettings</cmd> require a D-Bus session bus in order to make any changes. This is because the <sys>dconf</sys> daemon must be activated using D-Bus.
hr: I <app>dconf-editor</app> i <cmd>gsettings</cmd> zahtijevaju sabirnicu D-Bus sesije kako bi učinili bilo kakve promjene. To je zato što <sys>dconf</sys> pozadinski program mora biti aktiviran pomoću D-Busa.

note: (itstool) path: note/p
en: You can get the required session bus by running <cmd>gsettings</cmd> under the <sys>dbus-launch</sys> utility, like this:
hr: Možete dobiti potrebnu sabirnicu sesije pokretanjem <cmd>gsettings</cmd> pod <sys>dbus-launch</sys> pomagalom, ovako:

note: (itstool) path: page/p
en: <app>dconf-editor</app> may be better to use if you are not familiar with the options available in an application. It shows the hierarchy of settings in a tree-view and also displays additional information about each setting, including the description, type and default value.
hr: <app>dconf-editor</app> je bolje koristiti ako niste upoznati s mogućnostima dostupnim u aplikaciji. Prikazuje hijerarhiju postavki u prikazu stabla i još prikazuje dodatne informacije o svakoj postavci, uključujući opis, vrstu i zadanu vrijednost.

note: (itstool) path: page/p
en: <cmd>gsettings</cmd> is more powerful than <app>dconf-editor</app>. Bash completion is provided for <cmd>gsettings</cmd>, and you can write scripts that include <cmd>gsettings</cmd> commands for automated configuration.
hr: <cmd>gsettings</cmd> je moćniji od <app>dconf-editor</app> pomagala. Bash dovršavanje omogućeno je za <cmd>gsettings</cmd>, a možete pisati i skripte koje uključuju <cmd>gsettings</cmd> naredbe za automatsko podešavanje.

note: (itstool) path: page/p
en: For a complete list of <cmd>gsettings</cmd> options, see the <_:link-1/> man page.
hr: Za potpuni popis <cmd>gsettings</cmd> mogućnosti pogledajte <_:link-1/> man stranicu.

[ctx: link:trail]
note: (itstool) path: info/title
en: System Administration Guide
hr: Priručnik administracije sustava

note: (itstool) path: info/desc
en: A guide for GNOME 3 system administrators.
hr: Priručnik za GNOME administratore sustava.

note: (itstool) path: page/title
en: GNOME System Administration Guide
hr: GNOME priručnik administracije sustava

note: (itstool) path: info/desc
en: Enable the compose key by default for all users.
hr: Omogućavanje tipke sastavljanja po zadanome za sve korisnike.

note: (itstool) path: page/title
en: Enable the compose key
hr: Omogućavanje tipke sastavljanja

note: (itstool) path: page/p
en: To enable the Compose key and configure a certain key on your keyboard as the Compose key, set the <sys>org.gnome.desktop.input-sources.xkb-options</sys> GSettings key. That way, the setting will be enabled by default for all users on your system.
hr: Kako bi omogućili tipku Sastavljanja i podesili određenu tipku na svojoj tipkovnici kao tipku Sastavljanja, postavite <sys>org.gnome.desktop.input-sources.xkb-options</sys> GSettings ključ. Na taj će način postavka biti omogućena po zadanome za sve korisnike na vašem sustavu.

note: (itstool) path: steps/title
en: Set the Right Alt key as the Compose key
hr: Postavljanje desne Alt tipke kao tipke Sastavljanja

note: (itstool) path: item/p
en: Create a <sys>local</sys> database for machine-wide settings in <file>/etc/dconf/db/local.d/00-input-sources</file>:
hr: Stvorite <sys>lokalnu</sys> bazu podataka za postavke na cijelom sustavu u <file>/etc/dconf/db/local.d/00-input-sources</file>:

note: (itstool) path: item/code
en: [org/gnome/desktop/input-sources]
    # Set the Right Alt key as the Compose key and enable it
    xkb-options=['compose:<var>ralt</var>']
hr: [org/gnome/desktop/input-sources]
    # Postavite desnu Alt tipku kao tipku Sastavljanja i omogućite je
    xkb-options=['compose:<var>ralt</var>']

note: (itstool) path: item/p
en: If you want to set a different key than Right <key>Alt</key>, replace <var>ralt</var> with the name of that key as specified in the <link href="man:xkeyboard-config"><cmd>xkeyboard-config</cmd>(7)</link> man page, section <em>Position of Compose key</em>.
hr: Ako želite postaviti drugu tipku od desne <key>Alt</key> tipke, zamijenite <var>ralt</var> nazivom te tipke kako je navedeno u <link href="man:xkeyboard-config"> <cmd>xkeyboard-config</cmd>(7)</link> stranici priručnika, odjeljku <em>Position of Compose key</em>.

note: (itstool) path: item/p
en: Override the user's setting and prevent the user from changing it in <file>/etc/dconf/db/local.d/locks/input-sources</file>:
hr: Zaobiđite korisničku postavku i spriječite korisnika da je promijeni u <file>/etc/dconf/db/local.d/locks/input-sources</file>:

note: (itstool) path: item/code
en: # Lock the list of enabled XKB options
    /org/gnome/desktop/input-sources/xkb-options
hr: # Zaključajte popis omogućenih XKB mogućnosti
    /org/gnome/desktop/input-sources/xkb-options

note: (itstool) path: info/desc
en: Populate the keyboard layout chooser on the login screen.
hr: Prikaz rasporeda tipkovnica na zaslonu prijave.

note: (itstool) path: page/title
en: Display multiple keyboard layouts on the login screen
hr: Prikaz više rasporeda tipkovnice na zaslonu prijave

note: (itstool) path: page/p
en: You can change the system keyboard layout settings to add alternative keyboard layouts for users to choose from on the login screen. This can be helpful for users who normally use different keyboard layouts from the default and who want to have those keyboard layouts available at the login screen.
hr: Možete promijeniti postavke rasporeda tipkovnice sustava kako bi dodali alternativne rasporede tipkovnice koje korisnici mogu odabrati na zaslonu prijave. Ovo može biti od pomoći korisnicima koji uobičajeno koriste rasporede tipkovnice različite od zadanih i koji žele imati te rasporede tipkovnice dostupne na zaslonu prijave.

note: (itstool) path: steps/title
en: Change the system keyboard layout settings
hr: Promjena postavki rasporeda tipkovnice sustava

note: (itstool) path: item/p
en: Find the codes of the desired language layouts in the <file>/usr/share/X11/xkb/rules/base.lst</file> file under the section named <sys>! layout</sys>.
hr: Potražite kôdove željenih jezičnih rasporeda u datoteci <file>/usr/share/X11/xkb/rules/base.lst</file> u odjeljku naziva <sys>! layout</sys>.

note: (itstool) path: item/p
en: Use the <cmd>localectl</cmd> tool to change the system keyboard layout settings as follows:
hr: Koristite <cmd>localectl</cmd> alat za promjenu postavki rasporeda tipkovnice sustava na sljedeći način:

note: (itstool) path: item/screen
en: <cmd>localectl set-x11-keymap <var>layout</var></cmd>
hr: <cmd>localectl set-x11-keymap <var>raspored</var></cmd>

note: (itstool) path: item/p
en: You can specify multiple layouts as a comma-separated list. For example, to set <sys>es</sys> as the default layout, and <sys>us</sys> as the secondary layout, run the following command:
hr: Možete navesti više rasporeda kao popis odvojen zarezom. Primjerice, kako bi postavili <sys>hr</sys> kao zadani raspored, a <sys>us</sys> kao pomoćni raspored, pokrenite sljedeću naredbu:

note: (itstool) path: item/screen
en: <output>$ </output><input>localectl set-x11-keymap es,us</input>
hr: <output>$ </output><input>localectl set-x11-keymap hr,us</input>

note: (itstool) path: item/p
en: Log out to find that the defined layouts are available at the top bar on the login screen.
hr: Odjavite se kako bi vidjeli jesu li postavljeni rasporedi dostupni na gornjoj traci zaslona prijave.

note: (itstool) path: page/p
en: Note that you can also use the <cmd>localectl</cmd> tool to specify the machine-wide default keyboard model, variant, and options. See the <cmd>localectl</cmd>(1) man page for more information.
hr: Zapamtite da možete koristiti <cmd>localectl</cmd> alat za određivanje zadanog modela, varijante i mogućnosti tipkovnice za cijeli sustav. Za više informacija pogledajte <cmd>localectl</cmd>(1) stranicu priručnika.

note: (itstool) path: section/title
en: Display multiple keyboard layouts without using localectl
hr: Prikaz više rasporeda tipkovnice bez localectl korištenja

note: (itstool) path: section/p
en: On systems that do not provide the <cmd>localectl</cmd> tool, you can change the system keyboard layout settings by editing a configuration file in <file>/usr/share/X11/xorg.conf.d/</file>.
hr: Na sustavima koji ne pružaju <cmd>localectl</cmd> alat, možete promijeniti postavke rasporeda tipkovnice sustava uređivanjem datoteke podešavanja u <file>/usr/share/X11/xorg.conf.d/</file >.

note: (itstool) path: item/p
en: Add the layout codes to <file>/usr/share/X11/xorg.conf.d/10-evdev.conf</file> in the following way:
hr: Dodajte kôdove jezičnih rasporeda u <file>/usr/share/X11/xorg.conf.d/10-evdev.conf</file> na sljedeći način:

note: (itstool) path: item/screen
en: 
    Section "InputClass"
      Identifier "evdev keyboard catchall"
      MatchIsKeyboard "on"
      MatchDevicePath "/dev/input/event*"
      Driver "evdev"
      <input>Option "XkbLayout" "en,fr"</input>
    EndSection
hr: 
    Section "InputClass"
      Identifier "evdev keyboard catchall"
      MatchIsKeyboard "on"
      MatchDevicePath "/dev/input/event*"
      Driver "evdev"
      <input>Option "XkbLayout" "hr,en"</input>
    EndSection

note: (itstool) path: item/p
en: Multiple layouts can be added as a comma separated list, as shown in the example for English (<sys>en</sys>) and French (<sys>fr</sys>) layouts.
hr: Više rasporeda može se dodati kao popis odvojen zarezom, kao što je prikazano u primjeru za hrvatski (<sys>hr</sys>) i engleski (<sys>en</sys>) raspored.

note: (itstool) path: p/link
en: Creative Commons Attribution-ShareAlike 3.0 Unported License
hr: Creative Commons Imenovanje-Dijeli pod istim uvjetima 3.0 Hrvatska

note: (itstool) path: license/p
en: This work is licensed under a <_:link-1/>.
hr: Ovaj rad je licenciran pod <_:link-1/>.

note: (itstool) path: info/desc
en: Prevent users from accessing the command-line.
hr: Sprječavanje korisnika u pristupu naredbenom retku.

note: (itstool) path: page/title
en: Disable command-line access
hr: Onemogućavanje pristupa naredbenom retku

note: (itstool) path: page/p
en: To disable command-line access for your desktop user, you need to make configuration changes in a number of different contexts. Bear in mind that the following steps do not remove the desktop user's permissions to access a command line, but rather remove the ways that the desktop user could access the command line.
hr: Kako bi onemogućili pristup naredbenom retku za korisnika računala, morate učiniti promjene podešavanja u više različitih sadržaja. Zapamtite da sljedeći koraci ne uklanjaju dopuštenja korisnika računala za pristup naredbenom retku, već uklanjaju načine na koje korisnik računala može pristupiti naredbenom retku.

note: (itstool) path: item/p
en: Set the <code>org.gnome.desktop.lockdown.disable-command-line</code> GSettings key, which prevents the user from accessing the terminal or specifying a command line to be executed (the <keyseq><key>Alt</key> <key>F2</key></keyseq> command prompt).
hr: Postavite <code>org.gnome.desktop.lockdown.disable-command-line</code> GSettings ključ, koji sprječava korisnika da pristupi terminalu ili odredi naredbeni redak koji će se izvršiti (<keyseq><key>Alt </key> <key>F2</key></keyseq> naredbeni redak).

note: (itstool) path: item/p
en: Prevent users from accessing the <keyseq><key>Alt</key><key>F2</key> </keyseq> command prompt.
hr: Spriječite korisnike da pristupe <keyseq><key>Alt</key><key>F2</key> </keyseq> naredbenom retku.

note: (itstool) path: item/p
en: Disable switching to virtual terminals (VTs) with the <keyseq> <key>Ctrl</key><key>Alt</key><key><var>function key</var></key></keyseq> shortcuts by modifying the X server configuration.
hr: Onemogućite prebacivanje na virtualne terminale (VT) pomoću <keyseq> <key>Ctrl</key><key>Alt</key><key><var>funkcijska tipka</var></key></keyseq> prečaca promjenom podešavanja X poslužitelja.

note: (itstool) path: item/p
en: Remove <app>Terminal</app> and all other terminal applications from the <gui>Activities</gui> overview in GNOME Shell. You will also need to prevent the user from installing a new terminal application.
hr: Uklonite <app>Terminal</app> i sve ostale terminalske aplikacije iz <gui>Aktivnosti</gui> pregleda u GNOME ljusci. Još ćete morati spriječiti korisnika da instalira novu terminalsku aplikaciju.

note: (itstool) path: section/title
en: Disable the command prompt
hr: Onemogućavanje naredbenog retka

note: (itstool) path: item/p
en: Create a <sys>local</sys> database for machine-wide settings in <file>/etc/dconf/db/local.d/00-lockdown</file>:
hr: Stvorite <sys>lokalnu</sys> bazu podataka za postavke na cijelom sustavu u <file>/etc/dconf/db/local.d/00-lockdown</file>:

note: (itstool) path: item/code
en: # Specify the dconf path
    [org/gnome/desktop/lockdown]
    
    # Disable the command prompt
    disable-command-line=true
hr: # Navedi dconf putanju
    [org/gnome/desktop/lockdown]
    
    # Onemogući naredbeni redak
    disable-command-line=true

note: (itstool) path: item/p
en: Override the user’s setting and prevent the user from changing it in <file>/etc/dconf/db/local.d/locks/lockdown</file>:
hr: Zaobiđite korisničku postavku i spriječite korisnika da je promijeni u <file>/etc/dconf/db/local.d/locks/lockdown</file>:

note: (itstool) path: item/code
en: # List the keys used to configure lockdown
    /org/gnome/desktop/lockdown/disable-command-line
hr: # Navedi ključeve koji se koriste za podešavanje zaključavanja
    /org/gnome/desktop/lockdown/disable-command-line

note: (itstool) path: section/title
en: Disable dropping to a virtual terminal
hr: Onemogućavanje prebacivanja na virtualni terminal

note: (itstool) path: section/p
en: Users can normally use the <keyseq><key>Ctrl</key><key>Alt</key><key><var>function key</var></key></keyseq> shortcuts (for example, <keyseq><key>Ctrl</key><key>Alt</key><key>F2</key></keyseq>) to switch from the GNOME desktop to a virtual terminal.
hr: Korisnici mogu uobičajeno koristiti <keyseq><key>Ctrl</key><key>Alt</key><key><var>funkcijske tipke</var></key></keyseq> prečace (primjerice, <keyseq><key>Ctrl</key><key>Alt</key><key>F2</key></keyseq>) za prebacivanje s GNOME radne površine na virtualni terminal.

note: (itstool) path: section/p
en: If the computer is running the <em>X Window System</em>, you can disable access to all virtual terminals by adding a <code>DontVTSwitch</code> option to the <code>Serverflags</code> section in an X configuration file in the <file>/etc/X11/xorg.conf.d/</file> directory.
hr: Ako računalo pokreće <em>X prozorski sustav</em>, možete onemogućiti pristup svim virtualnim terminalima dodavanjem mogućnosti <code>DontVTSwitch</code> u odjeljak <code>Serverflags</code> u X datoteku podešavanja u direktoriju <file>/etc/X11/xorg.conf.d/</file>.

note: (itstool) path: item/p
en: Create or edit an X configuration file in <file>/etc/X11/xorg.conf.d/</file>. For example, <file>/etc/X11/xorg.conf.d/10-xorg.conf</file>:
hr: Stvorite ili uredite X datoteku podešavanja u <file>/etc/X11/xorg.conf.d/</file>. Primjerice, <file>/etc/X11/xorg.conf.d/10-xorg.conf</file>:

note: (itstool) path: item/p
en: Restart the X server for the changes to take effect.
hr: Ponovno pokrenite X poslužitelja kako bi se promjene primijenile.

note: (itstool) path: info/desc
en: Prevent the user from saving files to disk.
hr: Sprječavanje korisnika u spremanju datoteka na disk.

note: (itstool) path: page/title (itstool) path: steps/title
en: Disable file saving
hr: Onemogućavanje spremanja datoteke

note: (itstool) path: page/p
en: You can disable the <gui>Save</gui> and <gui>Save As</gui> dialogs. This can be useful if you are giving temporary access to a user or you do not want the user to save files to the computer.
hr: Možete onemogućiti <gui>Spremi</gui> i <gui>Spremi kao</gui> dijaloge. Ovo je korisno ako korisniku dajete privremeni pristup ili ne želite da korisnik sprema datoteke na računalo.

note: (itstool) path: note/p
en: This feature will only work in applications which support it! Not all GNOME and third party applications have this feature enabled. These changes will have no effect on applications which do not support this feature.
hr: Ova značajka će raditi samo u aplikacijama koje je podržavaju! Nemaju sve GNOME aplikacije i aplikacije trećih strana omogućenu ovu značajku. Ove promjene neće imati utjecaja na aplikacije koje ne podržavaju ovu značajku.

note: (itstool) path: item/p
en: Create the key file <file>/etc/dconf/db/local.d/00-filesaving</file> to provide information for the <sys>local</sys> database.
hr: Stvorite datoteku ključa <file>/etc/dconf/db/local.d/00-filesaving:</file> kako bi pružili informacija za <sys>lokalnu</sys> bazu podataka.

note: (itstool) path: listing/code
en: 
    # Specify the dconf path
    [org/gnome/desktop/lockdown]
    
    # Prevent the user from saving files on disk
    disable-save-to-disk=true
hr: 
    # Navedi dconf putanju
    [org/gnome/desktop/lockdown]
    
    # Spriječi korisnika da sprema datoteke na disk
    disable-save-to-disk=true

note: (itstool) path: item/p
en: To prevent the user from overriding these settings, create the file <file>/etc/dconf/db/local.d/locks/filesaving</file> with the following content:
hr: Kako bi spriječili korisnika da zaobiđe ove postavke, stvorite datoteku <file>/etc/dconf/db/local.d/locks/filesaving</file> sa sljedećim sadržajem:

note: (itstool) path: listing/code
en: 
    # Lock file saving settings
    /org/gnome/desktop/lockdown/disable-save-to-disk
hr: 
    # Zaključaj postavke spremanja datoteke
    /org/gnome/desktop/lockdown/disable-save-to-disk

note: (itstool) path: info/desc
en: Prevent the user from logging out and from switching a user.
hr: Sprječavanje korisnika u odjavi i zamijeni korisnika.

note: (itstool) path: page/title (itstool) path: steps/title
en: Disable user logout and user switching
hr: Onemogućavanje odjave korisnika i zamjene korisnika

note: (itstool) path: page/p
en: Preventing the user from logging out is useful for special kind of GNOME deployments (unmanned kiosks, public internet access terminals, and so on).
hr: Sprječavanje korisnika u odjavi korisno je za posebne vrste implementacija GNOMA (kiosci bez osoblja, javni terminali za pristup internetu itd.).

note: (itstool) path: note/p
en: Users can evade the logout lockdown by switching to a different user. That is the reason why it is recommended to also disable <em>user switching</em> when configuring the system.
hr: Korisnici mogu izbjeći blokadu odjave zamjenom za drugog korisnika. To je razlog zašto se isto preporučuje onemogućiti <em>zamjenu korisnika</em> pri podešavanju sustava.

note: (itstool) path: item/p
en: Create the key file <file>/etc/dconf/db/local.d/00-logout</file> to provide information for the <sys>local</sys> database:
hr: Stvorite datoteku ključa <file>/etc/dconf/db/local.d/00-logout</file> kako bi pružili informacija za <sys>lokalnu</sys> bazu podataka:

note: (itstool) path: item/screen
en: 
    [org/gnome/desktop/lockdown]
    # Prevent the user from logging out
    disable-log-out=true
    
    # Prevent the user from user switching
    disable-user-switching=true
hr: 
    [org/gnome/desktop/lockdown]
    # Spriječi korisnika da se odjavi
    disable-log-out=true
    
    # Spriječi korisnika da zamijeni korisnika
    disable-user-switching=true

note: (itstool) path: item/p
en: Override the user's setting and prevent the user from changing it in <file>/etc/dconf/db/local.d/locks/lockdown</file>:
hr: Zaobiđite korisničku postavku i spriječite korisnika da je promijeni u <file>/etc/dconf/db/local.d/locks/lockdown</file>:

note: (itstool) path: item/screen
en: 
    # Lock user logout
    /org/gnome/desktop/lockdown/disable-log-out
    
    # Lock user switching
    /org/gnome/desktop/lockdown/disable-user-switching
hr: 
    # Zaključaj odjavu korisnika
    /org/gnome/desktop/lockdown/disable-log-out
    
    # Zaključaj zamjenu korisnika
    /org/gnome/desktop/lockdown/disable-user-switching

note: (itstool) path: item/p
en: Restart the system for the system-wide settings to take effect.
hr: Ponovno pokrenite sustav kako bi se postavke primijenile za cijeli sustav.

note: (itstool) path: info/desc
en: Enable or disable some or all online accounts.
hr: Omogućavanje ili onemogućavanje pojedinih ili svih mrežnih računa.

note: (itstool) path: page/title
en: Allow or disallow online accounts
hr: Omogućavanje ili onemogućavanje mrežnih računa

note: (itstool) path: page/p
en: The <app>GNOME Online Accounts</app> (GOA) are used for integrating personal network accounts with the GNOME Desktop and applications. The user can add their online accounts, such as Google, Facebook, Flickr, ownCloud, and others using the <app>Online Accounts</app> application.
hr: <app>GNOME mrežni računi</app> (GOA) koriste se za integraciju osobnih mrežnih računa s GNOME radnom površinom i aplikacijama. Korisnik može dodati svoje mrežne račune, poput Googla, Facebooka, Flickra, ownClouda i ostalih pomoću aplikacije <app>Mrežni računi</app>.

note: (itstool) path: page/p
en: As a system administrator, you can:
hr: Kao administrator sustava, možete:

note: (itstool) path: item/p
en: enable all online accounts;
hr: omogućiti mrežne račune;

note: (itstool) path: item/p
en: selectively enable a few online accounts;
hr: omogućiti pojedine mrežne račune;

note: (itstool) path: item/p
en: disable all online accounts.
hr: onemogućiti sve mrežne račune.

note: (itstool) path: steps/title
en: Configure online accounts
hr: Podešavanje mrežnih računa

note: (itstool) path: item/p
en: Make sure that you have the <sys>gnome-online-accounts</sys> package installed on your system.
hr: Provjerite imate li instaliran <sys>gnome-online-accounts</sys> paket na vašem sustavu.

note: (itstool) path: item/p
en: Create the key file <file>/etc/dconf/db/local.d/00-goa</file> to provide information for the <sys>local</sys> database containing the following configuration.
hr: Stvorite datoteku ključa <file>/etc/dconf/db/local.d/00-goa</file> kako bi pružili informacije za <sys>lokalnu</sys> bazu podataka koja sadrži sljedeće podešavanje.

note: (itstool) path: item/p
en: To enable specific providers:
hr: Za omogućavanje pojedinih pružatelja usluga:

note: (itstool) path: item/p
en: To disable all providers:
hr: Za onemogućavanje svih pružatelja usluga:

note: (itstool) path: item/p
en: To allow all available providers:
hr: Za omogućavanje svih dostupnih pružatelja usluga:

note: (itstool) path: item/p
en: This is the default setting.
hr: Ovo je zadana postavka.

note: (itstool) path: item/p
en: To prevent the user from overriding these settings, create the file <file>/etc/dconf/db/local.d/locks/goa</file> with the following content:
hr: Kako bi spriječili korisnika da zaobiđe ove postavke, stvorite datoteku <file>/etc/dconf/db/local.d/locks/goa</file> sa sljedećim sadržajem:

note: (itstool) path: listing/code
en: 
    # Lock the list of providers that are allowed to be loaded
    /org/gnome/online-accounts/whitelisted-providers
hr: 
    # Zaključavanje popisa pružatelja usluga kojima je dopušteno učitavanje
    /org/gnome/online-accounts/whitelisted-providers

note: (itstool) path: info/desc
en: Prevent the user from printing documents.
hr: Sprječavanje korisnika u ispisivanju dokumenata.

note: (itstool) path: page/title (itstool) path: steps/title
en: Disable printing
hr: Onemogućavanje ispisivanja

note: (itstool) path: page/p
en: You can disable the print dialog from being shown to users. This can be useful if you are giving temporary access to a user or you do not want the user to print to network printers.
hr: Možete onemogućiti prikaz dijaloga ispisa korisnicima. Ovo može biti korisno ako korisniku dajete privremeni pristup ili ne želite da korisnik ispisuje na mrežnim pisačima.

note: (itstool) path: item/p
en: Create the key file <file>/etc/dconf/db/local.d/00-printing</file> to provide information for the <sys>local</sys> database.
hr: Stvorite datoteku ključa <file>/etc/dconf/db/local.d/00-printing</file> kako bi pružili informacija za <sys>lokalnu</sys> bazu podataka.

note: (itstool) path: listing/code
en: 
    # Specify the dconf path
    [org/gnome/desktop/lockdown]
     
    # Prevent applications from printing
    disable-printing=true
hr: 
    # Navedi dconf putanju
    [org/gnome/desktop/lockdown]
     
    # Spriječi ispis aplikacija
    disable-printing=true

note: (itstool) path: item/p
en: To prevent the user from overriding these settings, create the file <file>/etc/dconf/db/local.d/locks/printing</file> with the following content:
hr: Kako bi spriječili korisnika da zaobiđe ove postavke, stvorite datoteku <file>/etc/dconf/db/local.d/locks/printing</file> sa sljedećim sadržajem:

note: (itstool) path: listing/code
en: 
    # Lock printing settings
    /org/gnome/desktop/lockdown/disable-printing
hr: 
    # Zaključava postavke ispisa
    /org/gnome/desktop/lockdown/disable-printing

note: (itstool) path: info/desc
en: Prevent the user from changing disk partitions.
hr: Sprječavanje korisnika u particioniranju diska.

note: (itstool) path: page/title (itstool) path: steps/title
en: Disable repartitioning
hr: Onemogućavanje particioniranja

note: (itstool) path: page/p
en: <sys>polkit</sys> enables you to set permissions for individual operations. For <sys>udisks2</sys>, the utility for disk management services, the configuration is located at <file>/usr/share/polkit-1/actions/org.freedesktop.udisks2.policy</file>. This file contains a set of actions and default values, which can be overridden by system administrator.
hr: <sys>polkit</sys> vam omogućuje postavljanje dopuštenja za pojedinačne radnje. Za <sys>udisks2</sys>, pomagalo usluga upravljanja diskom, podešavanje se nalazi u putanji <file>/usr/share/polkit-1/actions/org.freedesktop.udisks2.policy</file>. Ova datoteka sadrži skup radnji i zadanih vrijednosti, koje administrator sustava može zaobići.

note: (itstool) path: note/p
en: The <sys>polkit</sys> configuration in <file>/etc</file> overrides that shipped by packages in <file>/usr/share</file>.
hr: Podešavanje <sys>polkit</sys> u <file>/etc</file> zaobilazi onu isporučenu paketima u <file>/usr/share</file>.

note: (itstool) path: item/p
en: Create a file with the same content as in <file>/usr/share/polkit-1/actions/org.freedesktop.udisks2.policy</file>: <cmd>cp /usr/share/polkit-1/actions/org.freedesktop.udisks2.policy /etc/share/polkit-1/actions/org.freedesktop.udisks2.policy</cmd>
hr: Stvorite datoteku s istim sadržajem kao u <file>/usr/share/polkit-1/actions/org.freedesktop.udisks2.policy</file>: <cmd>cp /usr/share/polkit-1/actions/ org.freedesktop.udisks2.policy /etc/share/polkit-1/actions/org.freedesktop.udisks2.policy</cmd>

note: (itstool) path: note/p
en: Do not change the <file>/usr/share/polkit-1/actions/org.freedesktop.udisks2.policy</file> file, your changes will be overwritten by the next package update.
hr: Ne mijenjate <file>/usr/share/polkit-1/actions/org.freedesktop.udisks2.policy</file> datoteku, vaše će promjene biti prebrisane sljedećom nadopunom paketa.

note: (itstool) path: item/p
en: Delete any actions you do not need from within the <code>policyconfig</code> element and add the following lines to the <file>/etc/polkit-1/actions/org.freedesktop.udisks2.policy</file> file:
hr: Obrišite sve radnje koje vam nisu potrebne unutar <code>policyconfig</code> elementa i dodajte sljedeće retke u <file>/etc/polkit-1/actions/org.freedesktop.udisks2.policy</file> datoteku:

note: (itstool) path: item/p
en: Replace <code>no</code> by <code>auth_admin</code> if you want to ensure only the root user is able to carry out the action.
hr: Zamijenite <code>no</code> s <code>auth_admin</code> ako želite osigurati da samo korijenski korisnik može izvršiti radnju.

note: (itstool) path: item/p
en: Save the changes.
hr: Spremite promjene.

note: (itstool) path: page/p
en: When the user tries to change the disk settings, the following message is shown: <gui>Authentication is required to modify drive settings</gui>.
hr: Kada korisnik pokuša promijeniti postavke diska, prikazuje se sljedeća poruka: <gui>Potrebna je ovjera za promjenu postavki uređaja</gui>.

note: (itstool) path: info/desc
en: Set up a kiosk-like, single-application system.
hr: Postavljanje sustava s jednom aplikacijom nalik kiosku.

note: (itstool) path: page/title
en: Configure single-application mode
hr: Podešavanje načina rada jedne aplikacije

note: (itstool) path: page/p
en: Single-application mode is a modified GNOME Shell which configures the Shell as an interactive kiosk. The administrator locks down some behavior to make the standard desktop more restrictive for users, letting them focus on selected features.
hr: Način rada s jednom aplikacijom prilagođena je GNOME ljuska koja podešava ljusku kao interaktivni kiosk. Administrator zaključava određena ponašanja kako bi standardnu radnu površinu učinio restriktivnijom za korisnike, dopuštajući im da se usredotoče na odabrane značajke.

note: (itstool) path: page/p
en: Set up single-application mode for a wide range of functions in a number of fields (from communication to entertainment or education), and use it as a self-serve machine, event manager, registration point, and so on.
hr: Postavite način rada s jednom aplikacijom za širok raspon funkcija u brojnim poljima (od komunikacije do zabave ili obrazovanja) i koristite ga kao samouslužni stroj, upravitelj događaja, mjesto registracije itd.

note: (itstool) path: steps/title
en: Set up single-application mode
hr: Postavljanje načina rada jedne aplikacije

note: (itstool) path: item/p
en: Lock down settings to prevent printing, terminal access, and so on.
hr: Zaključajte postavke kako bi spriječili ispis, pristup terminalu itd..

note: (itstool) path: item/p
en: Configure automatic login in the <file>/etc/gdm/custom.conf</file> file for the user.
hr: Podesite automatsku prijavu u <file>/etc/gdm/custom.conf</file> datoteci za korisnika.

note: (itstool) path: item/p
en: See <link xref="login-automatic"/> for more information.
hr: Pogledajte <link xref="login-automatic"/> za više informacija.

note: (itstool) path: item/p
en: Create a new user with a name, which follows typical naming conventions (no space or special characters, do not start with a digit or a dash). Also, make sure the user name matches with the related names, such as when referring to a session. A good example is <em>kiosk-user</em>.
hr: Stvorite novog korisnika s imenom koje slijedi tipična pravila imenovanja (bez razmaka ili posebnih znakova, ne započinjite znamenkom ili crticom). Isto, provjerite podudara li se korisničko ime s povezanim imenima, primjerice kada se govori o sesiji. Dobar primjer je <em>kiosk-user</em>.

note: (itstool) path: item/p
en: Create a session with a name matching the user name (for example, for the <em>kiosk-user</em> mentioned above, <em>kiosk</em> is a good match). To do so, create a <file>/usr/share/xsessions/<var>kiosk</var>.desktop</file> file and set the <code>Exec</code> line as follows:
hr: Stvorite sesiju s imenom koje odgovara korisničkom imenu (primjerice, za <em>kiosk-user</em> koji je gore spomenut, <em>kiosk</em> dobro odgovara). Kako bi to učinili, stvorite datoteku <file>/usr/share/xsessions/<var>kiosk</var>.desktop</file> i postavite redak <code>Exec</code> na sljedeći način:

note: (itstool) path: item/p
en: Set the default session for <em>kiosk-user</em> by adding the following line to the <file>/var/lib/AccountsService/users/<var>kiosk-user</var> </file> file:
hr: Postavite zadanu sesiju za <em>kiosk-user</em> dodavanjem sljedećeg retka u <file>/var/lib/AccountsService/users/<var>kiosk-user</var> </file> datoteku:

note: (itstool) path: item/p
en: Define the <em>kiosk</em> session by writing a custom session definition, containing the following line:
hr: Definirajte <em>kiosk</em> sesiju pisanjem prilagođene definicije sesije koja sadrži sljedeći redak:

note: (itstool) path: item/p
en: This creates a session that runs three programs: <sys>kiosk-app</sys> (a sample application), <sys>gnome-settings-daemon</sys> (a standard component in the GNOME session), and <sys>kiosk-shell</sys> (which is a customized version of GNOME Shell).
hr: Ovo stvara sesiju koja pokreće tri programa: <sys>kiosk-app</sys> (uzorak aplikacije), <sys>gnome-settings-daemon</sys> (standardna komponenta u GNOME sesiji) i <sys >kiosk-shell</sys> (koji je prilagođena inačica GNOME ljuske).

note: (itstool) path: item/p
en: Create a desktop file for <sys>kiosk-shell</sys> in <file>/usr/share/applications/kiosk-shell.desktop</file>, containing the following lines:
hr: Stvorite .desktop datoteku za <sys>kiosk-shell</sys> u <file>/usr/share/applications/kiosk-shell.desktop</file>, koja sadrži sljedeće retke:

note: (itstool) path: item/p
en: Create a mode definition <file>/usr/share/gnome-shell/modes/kiosk.json</file>. This is a simple json file defining the available <sys>gnome-shell</sys> user interface.
hr: Stvorite definiciju načina rada <file>/usr/share/gnome-shell/modes/kiosk.json</file>. Ovo je jednostavna json datoteka koja definira dostupno <sys>gnome-shell</sys> korisničko sučelje.

note: (itstool) path: item/p
en: As the starting point, look at <file>/usr/share/gnome-shell/modes/classic.json</file> and <file>/usr/share/gnome-shell/modes/initial-setup.json</file> for examples.
hr: Kao polazište, pogledajte <file>/usr/share/gnome-shell/modes/classic.json</file> i <file>/usr/share/gnome-shell/modes/initial-setup.json</file> za primjere.

note: (itstool) path: info/desc
en: Log in automatically into a user account on startup.
hr: Automatska prijava u korisnički račun pri pokretanju.

note: (itstool) path: page/title
en: Configure automatic login
hr: Podešavanje automatske prijave

note: (itstool) path: page/p TRANSLATORS: 'Administrator' and 'Automatic Login' are strings from the Users dialog in the Settings panel user interface.
en: A user with an <em>Administrator</em> account type can <link href="help:gnome-help/user-autologin">enable <em>Automatic Login</em> from the <app>Settings</app></link> panel. You can also set up autologin manually in the <_:sys-1/> custom configuration file, as follows.
hr: Korisnik s <em>Administratorskim</em> računom može <link href="help:gnome-help/user-autologin">omogućiti <em>Automatsku prijavu</em> iz <app>Postavke</app></link> panela. Automatsku prijavu možete postaviti i ručno u <_:sys-1/> prilagođenoj datoteci postavki, kako slijedi.

note: (itstool) path: page/p
en: Edit the <_:file-1/> file and make sure that the <code>[daemon]</code> section in the file specifies the following:
hr: Uredite datoteku <_:file-1/> i provjerite navodi li <code>[daemon]</code> odjeljak u datoteci sljedeće:

note: (itstool) path: page/p
en: Replace the <_:input-1/> with the user that you want to be automatically logged in.
hr: Zamijenite <_:input-1/> korisnikom kojeg želite automatski prijaviti.

note: (itstool) path: note/p
en: The <_:file-1/> file can usually be found in <_:file-2/>, but the location may differ depending on your distribution.
hr: Datoteka <_:file-1/> uobičajeno se može pronaći u <_:file-2/>, ali lokacija se može razlikovati ovisno o vašoj distribuciji.

note: (itstool) path: info/desc
en: Show extra text on the login screen.
hr: Prikaz dodatnog teksta na zaslonu prijave.

note: (itstool) path: page/title
en: Display a text banner on the login screen
hr: Prikaz tekstnog natpisa na zaslonu prijave

note: (itstool) path: page/p
en: You can display extra text on the login screen, such as who to contact for support, by setting the <sys>org.gnome.login-screen.banner-message-enable</sys> and <sys>org.gnome.login-screen.banner-message-text</sys> GSettings keys.
hr: Možete prikazati dodatni tekst na zaslonu prijave, poput koga kontaktirati za podršku, postavljanjem <sys>org.gnome.login-screen.banner-message-enable</sys> i <sys>org.gnome.login -screen.banner-message-text</sys> GSettings ključeva.

note: (itstool) path: steps/title
en: Display a text banner on the login screen:
hr: Prikaz tekstnog natpisa na zaslonu prijave:

note: (itstool) path: item/p
en: Create a <sys>gdm</sys> keyfile for machine-wide settings in <_:file-1/>:
hr: Stvorite <sys>gdm</sys> datoteku ključa za postavke cijelog sustava u <_:file-1/>:

note: (itstool) path: code/input
en: Type the banner message here.
hr: Ovdje upišite poruku natpisa.

note: (itstool) path: note/p
en: There is no character limit for the banner message. <sys>gnome-shell</sys> autodetects longer stretches of text and enters two column mode.
hr: Ne postoji ograničenje broja znakova za poruku natpisa. <sys>gnome-shell</sys> automatski otkriva duže dijelove teksta i ulazi u način rada s dva stupca.

note: (itstool) path: note/p
en: The banner message cannot be read from an external file.
hr: Poruka natpisa ne može se pročitati iz vanjske datoteke.

note: (itstool) path: info/desc
en: Use your Active Directory or IPA domain credentials to log into GNOME.
hr: Korištenje vjerodajnica Aktivnog direktorija ili IPA domene za prijavu u GNOME.

note: (itstool) path: page/title
en: Use enterprise credentials to log into GNOME
hr: Korištenje vjerodajnica tvrtke za prijavu u GNOME

note: (itstool) path: page/p
en: If your network has an Active Directory or IPA domain available, and you have a domain account, you can use your domain credentials to log into GNOME.
hr: Ako vaša mreža ima dostupan Aktivan direktorij ili IPA domenu, a vi imate račun domene, možete koristiti svoje vjerodajnice domene za prijavu u GNOME.

note: (itstool) path: page/p
en: If the machine has been successfully configured for domain accounts, users can log into GNOME using their accounts. At the login prompt, type the domain user name followed by an <sys>@</sys> sign, and then your domain name. For example, if your domain name is <var>example.com</var> and the user name is <var>User</var>, type:
hr: Ako je sustav uspješno podešen za račune domene, korisnici se mogu prijaviti u GNOME pomoću svojih računa. Na upit za prijavu, upišite korisničko ime domene nakon čega slijedi <sys>@</sys> znak, a zatim naziv vaše domene. Primjerice, ako je naziv vaše domene <var>primjer.com</var>, a korisničko ime <var>Goran</var>, upišite:

note: (itstool) path: page/screen
en: <input>User@example.com</input>
hr: <input>Goran@primjer.com</input>

note: (itstool) path: page/p
en: In cases where the machine is already configured for domain accounts, you should see a helpful hint describing the login format.
hr: U slučajevima kada je sustav već podešen za račune domene, trebali bi vidjeti koristan savjet koji opisuje format prijave.

note: (itstool) path: section/title
en: Use enterprise credentials during Welcome screens
hr: Korištenje vjerodajnice tvrtke tijekom zaslona dobrodošlice

note: (itstool) path: section/p
en: If you have not yet configured the machine for enterprise credentials, you can do so at the <gui>Welcome</gui> screens that are part of the <app>GNOME Initial Setup</app> program.
hr: Ako još niste podesili sustav za vjerodajnice tvrtke, možete to učiniti na zaslonima <gui>Dobrodošlice</gui> koji su dio programa <app>GNOME početno postavljanje</app>.

note: (itstool) path: steps/title
en: Configure enterprise credentials
hr: Podešavanje vjerodajnica tvrtke

note: (itstool) path: item/p
en: At the <gui>Login</gui> welcome screen, choose <gui>Set Up Enterprise Login</gui>.
hr: Na zaslonu dobrodošlice <gui>Prijave</gui>, odaberite <gui>Poslovna prijava</gui>.

note: (itstool) path: item/p
en: Type the name of your domain in the <gui>Domain</gui> field if it is not already prefilled.
hr: Upišite naziv svoje domene u polje <gui>Domena</gui> ako već nije unaprijed popunjeno.

note: (itstool) path: item/p
en: Type your domain account user and password in the relevant fields.
hr: U odgovarajuća polja upišite korisnika računa domene i lozinku.

note: (itstool) path: item/p
en: Click <gui>Next</gui>.
hr: Kliknite na <gui>Sljedeće</gui>.

note: (itstool) path: section/p
en: Depending on how the domain is configured, a prompt may show up asking for the domain administrator’s name and password in order to proceed.
hr: Ovisno kako je domena podešena, može se pojaviti upit koji traži ime i lozinku administratora domene kako bi se prijava nastavila.

note: (itstool) path: section/title
en: Change to use enterprise credentials to log into GNOME
hr: Promjena u korištenje vjerodajnica tvrtke za prijavu u GNOME

note: (itstool) path: section/p
en: If you have already completed initial setup, and wish to start a domain account to log into GNOME, then you can accomplish this from the Users panel in the GNOME Settings.
hr: Ako ste već završili početno postavljanje i želite pokrenuti račun domene za prijavu u GNOME, to možete učiniti u Korisnici panelu u GNOME postavkama.

note: (itstool) path: item/p
en: Open the <gui href="help:gnome-help/shell-terminology">Activities</gui> overview and start typing <gui>Users</gui>.
hr: Otvorite <gui href="help:gnome-help/shell-terminology">Aktivnosti</gui> pregled i počnite upisivati <gui>Korisnici</gui>.

note: (itstool) path: item/p
en: Click on <gui>Users</gui> to open the panel.
hr: Kliknite na <gui>Korisnici</gui> u bočnoj traci za otvaranje panela.

note: (itstool) path: item/p
en: Click the <gui>Unlock</gui> button and type the computer administrator’s password.
hr: Kliknite na <gui>Otključaj…</gui> tipku i upišite administratorsku lozinku računala.

note: (itstool) path: item/p
en: Click the <gui>[+]</gui> button in the lower left of the window.
hr: Kliknite na <gui>[+]</gui> tipku u donjem lijevom dijelu prozora.

note: (itstool) path: item/p
en: Click the <gui>Enterprise Login</gui> button.
hr: Kliknite na <gui>Poslovna prijava</gui> tipku.

note: (itstool) path: item/p
en: Enter the domain, user, and password for your Enterprise account, and click <gui>Add</gui>.
hr: Upišite domenu, korisnika i lozinku za vaš poslovni račun zatim kliknite na <gui>Dodaj</gui>.

note: (itstool) path: section/p
en: Depending on how your domain is configured, a prompt may show up asking for the domain administrator’s name and password in order to proceed.
hr: Ovisno o tome kako je vaša domena podešena, može se pojaviti upit koji traži ime i lozinku administratora domene kako bi nastavili prijavu.

note: (itstool) path: section/title
en: Troubleshoot and advanced setup
hr: Rješavanje problema i napredno postavljanje

note: (itstool) path: section/p
en: The <cmd>realm</cmd> command and its various subcommands can be used to troubleshoot the enterprise login feature. For example, to see whether the machine has been configured for enterprise logins, run the following command:
hr: Naredba <cmd>realm</cmd> i njezine razne podnaredbe mogu se koristiti za rješavanje problema značajke poslovne prijave. Primjerice, kako bi vidjeli je li sustav podešen za poslovne prijave, pokrenite sljedeću naredbu:

note: (itstool) path: section/p
en: Network administrators are encouraged to pre-join workstations to a relevant domain. This can be done using the kickstart <cmd>realm join</cmd> command, or running <cmd>realm join</cmd> in an automated fashion from a script.
hr: Mrežni administratori se potiču da se unaprijed pridruže radnim stanicama na relevantnoj domeni. To se može učiniti pomoću kickstart <cmd>realm join</cmd> naredbe ili pokretanja <cmd>realm join</cmd> na automatiziran način iz skripte.

note: (itstool) path: section/title
en: Get more information
hr: Saznajte više informacija

note: (itstool) path: item/p
en: The realmd <link href="http://www.freedesktop.org/software/realmd/docs/"> Administrative Guide</link> provides more detailed information on using the enterprise login feature.
hr: Realmd <link href="http://www.freedesktop.org/software/realmd/docs/"> Administratorski priručnik</link> pruža opširnije informacije o korištenju značajke poslovne prijave.

note: (itstool) path: info/desc
en: Prevent the user from being able to log in using a fingerprint scanner.
hr: Sprječavanje prijave korisnika pomoću skenera otiska prsta.

note: (itstool) path: page/title
en: Disallow login using a fingerprint
hr: Onemogućavanje prijave otiskom prsta

note: (itstool) path: page/p
en: Users with a fingerprint scanner can use their fingerprints instead of a password to log in. Fingerprint login <link href="help:gnome-help#session-fingerprint">needs to be set up by the user</link> before it can be used.
hr: Korisnici sa skenerom otiska prsta mogu koristiti svoje otiske prstiju umjesto lozinke za prijavu. Prijavu otiskom prsta <link href="help:gnome-help#session-fingerprint">treba postaviti korisnik</link> prije nego što ju može koristiti.

note: (itstool) path: page/p
en: Fingerprint readers are not always reliable, so you may wish to disable login using the reader for security reasons.
hr: Čitači otisaka prstiju nisu uvijek pouzdani, stoga možete onemogućiti prijavu pomoću čitača iz sigurnosnih razloga.

note: (itstool) path: steps/title
en: Disable login using a fingerprint reader:
hr: Onemogućavanje prijave pomoću čitača otiska prsta:

note: (itstool) path: item/p
en: Create the key file <file>/etc/dconf/db/local.d/00-login</file> to provide information for the <sys>local</sys> database.
hr: Stvorite datoteku ključa <file>/etc/dconf/db/local.d/00-login:</file> kako bi pružili informacija za <sys>lokalnu</sys> bazu podataka.

note: (itstool) path: listing/code
en: 
    # Specify the dconf path
    [org/gnome/login-screen]
    
    # Disable fingerprint reader
    enable-fingerprint-authentication=false
hr: 
    # Navedi dconf putanju
    [org/gnome/login-screen]
    
    # Onemogući čitača otiska prsta
    enable-fingerprint-authentication=false

note: (itstool) path: item/p
en: To prevent the user from overriding these settings, create the file <file>/etc/dconf/db/local.d/locks/login</file> with the following content:
hr: Kako bi spriječili korisnika da zaobiđe ove postavke, stvorite datoteku <file>/etc/dconf/db/local.d/locks/login</file> sa sljedećim sadržajem:

note: (itstool) path: listing/code
en: 
    # List the keys used to configure login
    /org/gnome/login-screen/enable-fingerprint-authentication
hr: 
    # Navedi ključeve koji se koriste za podešavanje prijave
    /org/gnome/login-screen/enable-fingerprint-authentication

note: (itstool) path: info/desc
en: Edit a <_:sys-1/> <_:sys-2/> profile to display an image on the login screen.
hr: Uređivanje <_:sys-1/> <_:sys-2/> profila za prikaz slike na zaslonu prijave.

note: (itstool) path: page/title
en: Add a greeter logo to the login screen
hr: Dodavanje logotipa dobrodošlice na zaslon prijave

note: (itstool) path: page/p
en: The greeter logo on the login screen is controlled by the <sys>org.gnome.login-screen.logo</sys> GSettings key. Since <sys>GDM</sys> uses its own <sys>dconf</sys> profile, you can add a greeter logo by changing the settings in that profile.
hr: Logotipom dobrodošlice na zaslonu prijave upravlja se pomoću <sys>org.gnome.login-screen.logo</sys> GSettings ključa. Budući da <sys>GDM</sys> koristi vlastiti <sys>dconf</sys> profil, možete dodati logotip dobrodošlice promjenom postavki u tom profilu.

note: (itstool) path: page/p
en: When choosing an appropriate picture for the logo to your login screen, consider the following picture requirements:
hr: Pri odabiru odgovarajuće slike za logotip na zaslonu prijave, razmotrite sljedeće zahtjeve za sliku:

note: (itstool) path: item/p
en: All the major formats are supported: ANI, BPM, GIF, ICNS, ICO, JPEG, JPEG 2000, PCX, PNM, PBM, PGM, PPM, GTIFF, RAS, TGA, TIFF, XBM, WBMP, XPM, and SVG.
hr: Podržani su svi glavni formati: ANI, BPM, GIF, ICNS, ICO, JPEG, JPEG 2000, PCX, PNM, PBM, PGM, PPM, GTIFF, RAS, TGA, TIFF, XBM, WBMP, XPM i SVG.

note: (itstool) path: item/p
en: The size of the picture scales proportionally to the height of 48 pixels. So, if you set the logo to 1920x1080, for example, it changes into an 85x48 thumbnail of the original picture.
hr: Veličina slike proporcionalno se mijenja prema visini od 48 piksela. Stoga, ako logotip postavite na 1920x1080, primjerice, on se mijenja u 85x48 minijaturu izvorne slike.

note: (itstool) path: steps/title
en: Set the org.gnome.login-screen.logo key
hr: Postavljanje org.gnome.login-screen.logo ključa

note: (itstool) path: item/p
en: Create a <sys>gdm</sys> database for machine-wide settings in <file>/etc/dconf/db/gdm.d/<var>01-logo</var></file>:
hr: Stvorite <sys>gdm</sys> bazu podataka za postavke cijelog sustava u <file>/etc/dconf/db/gdm.d/<var>01-logo</var></file>:

note: (itstool) path: item/p
en: Replace <var>/usr/share/pixmaps/logo/greeter-logo.png</var> with the path to the image file you want to use as the greeter logo.
hr: Zamijenite <var>/usr/share/pixmaps/logo/greeter-logo.png</var> putanjom do datoteke slike koju želite koristiti kao logotip dobrodošlice.

note: (itstool) path: section/title
en: What if the logo does not update?
hr: Što ako se logotip ne nadopuni?

note: (itstool) path: section/p
en: Make sure that you have run the <cmd>dconf update</cmd> command to update the system databases.
hr: Provjerite jeste li pokrenuli <cmd>dconf update</cmd> naredbu za nadopunu baza podataka sustava.

note: (itstool) path: section/p
en: In case the logo does not update, try restarting <sys>GDM</sys>.
hr: U slučaju da se logotip ne nadopuni, pokušajte ponovno pokrenuti <sys>GDM</sys>.

note: (itstool) path: info/desc
en: <link xref="login-userlist-disable">Disable the user list</link>, <link xref="session-user">configure a user default session</link>, <link xref="login-automatic">automatic login</link>…
hr: <link xref="login-userlist-disable">Onemogućavanje popisa korisnika</link>, <link xref="session-user">podešavanje zadane sesije korisnika</link>, <link xref="login-automatic">automatska prijava</link>…

note: (itstool) path: page/title
en: Login
hr: Prijava

note: (itstool) path: section/title
en: Management
hr: Upravljanje

note: (itstool) path: info/desc
en: Make users type in their username on the login screen.
hr: Korisnici moraju upisati svoje korisničko ime na zaslonu prijave.

note: (itstool) path: page/title
en: Disable the user list
hr: Onemogućavanje popisa korisnika

note: (itstool) path: page/p
en: You can disable the user list shown on the login screen by setting the <sys>org.gnome.login-screen.disable-user-list</sys> GSettings key.
hr: Možete onemogućiti popis korisnika prikazan na zaslonu prijave postavljanjem <sys>org.gnome.login-screen.disable-user-list</sys> GSettings ključa.

note: (itstool) path: page/p
en: When the user list is disabled, users need to type their user name and password at the prompt to log in.
hr: Kada je popis korisnika onemogućen, korisnici moraju upisati svoje korisničko ime i lozinku na upit za prijavu.

note: (itstool) path: steps/title
en: Set the org.gnome.login-screen.disable-user-list key
hr: Postavljanje org.gnome.login-screen.disable-user-list ključa

note: (itstool) path: item/p
en: Create a <sys>gdm</sys> keyfile for machine-wide settings in <file>/etc/dconf/db/gdm.d/00-login-screen</file>:
hr: Stvorite <sys>gdm</sys> datoteku ključa za postavke cijelog sustava u <file>/etc/dconf/db/gdm.d/00-login-screen</file>:

note: (itstool) path: item/code
en: [org/gnome/login-screen]
    # Do not show the user list
    disable-user-list=true
hr: [org/gnome/login-screen]
    # Ne prikazuj popis korisnika
    disable-user-list=true

note: (itstool) path: info/desc
en: End an idle user session.
hr: Završetak neaktivne korisničke sesije.

note: (itstool) path: page/title
en: Configure automatic logout
hr: Podešavanje automatske odjave

note: (itstool) path: page/p
en: User sessions that have been idle for a specific period of time can be ended automatically. You can set different behaviour based on whether the machine is running from a battery or from mains power by setting the corresponding <_:sys-1/> key, then locking it.
hr: Korisničke sesije koje su bile neaktivne određeno vrijeme mogu se automatski završiti. Možete postaviti različito ponašanje ovisno o tome radi li sustav na bateriju ili na napajanje tako da postavite odgovarajući <_:sys-1/> ključ, a zatim je zaključate.

note: (itstool) path: note/p
en: Keep in mind that users can potentially lose unsaved data if an idle session is automatically ended.
hr: Zapamtite da korisnici potencijalno mogu izgubiti nespremljene podatke ako se sesija mirovanja automatski završi.

note: (itstool) path: steps/title
en: Set automatic logout for a mains powered machine
hr: Postavljanje automatske odjave za sustav s napajanjem

note: (itstool) path: item/p
en: Create a <code>local</code> database for machine-wide settings in <file>/etc/dconf/db/local.d/00-autologout</file>:
hr: Stvorite <code>local</code> bazu podataka za postavke na cijelom računalu u <file>/etc/dconf/db/local.d/00-autologout</file>:

note: (itstool) path: listing/code
en: 
    [org/gnome/settings-daemon/plugins/power]
    # Set the timeout to 900 seconds when on mains power
    sleep-inactive-ac-timeout=900
    # Set action after timeout to be logout when on mains power
    sleep-inactive-ac-type='logout'
hr: 
    [org/gnome/settings-daemon/plugins/power]
    # Postavi vrijeme čekanja na 900 sekundi kada je sustav na napajanju
    sleep-inactive-ac-timeout=900
    # Postavi radnju nakon isteka vremena za odjavu kada je sustav na napajanju
    sleep-inactive-ac-type='logout'

note: (itstool) path: item/p
en: Override the user's setting and prevent the user from changing it in <file>/etc/dconf/db/local.d/locks/autologout</file>:
hr: Zaobilaženje korisničke postavke i sprječavanje korisnika da je promijeni u <file>/etc/dconf/db/local.d/locks/autologout</file>:

note: (itstool) path: listing/code
en: 
    # Lock automatic logout settings
    /org/gnome/settings-daemon/plugins/power/sleep-inactive-ac-timeout
    /org/gnome/settings-daemon/plugins/power/sleep-inactive-ac-type
hr: 
    # Zaključavanje postavke automatske odjave
    /org/gnome/settings-daemon/plugins/power/sleep-inactive-ac-timeout
    /org/gnome/settings-daemon/plugins/power/sleep-inactive-ac-type

note: (itstool) path: page/p
en: The following GSettings keys are of interest:
hr: Sljedeći GSettings ključevi su od interesa:

note: (itstool) path: item/p
en: The number of seconds that the computer needs to be inactive before it goes to sleep if it is running from AC power.
hr: Broj sekundi za koliko računalo treba biti neaktivno prije nego što uđe u stanje mirovanja ako radi na napajanju.

note: (itstool) path: item/p
en: What should happen when the timeout has passed if the computer is running from AC power.
hr: Što se treba dogoditi kada istekne vrijeme čekanja ako računalo radi na napajanju.

note: (itstool) path: item/p
en: The number of seconds that the computer needs to be inactive before it goes to sleep if it is running from battery power.
hr: Broj sekundi za koliko računalo treba biti neaktivno prije nego što uđe u stanje mirovanja ako radi na bateriji.

note: (itstool) path: item/p
en: What should happen when the timeout has passed if the computer is running from battery power.
hr: Što se treba dogoditi kada istekne vrijeme čekanja ako računalo radi na bateriji.

note: (itstool) path: page/p
en: You can run <cmd>gsettings range</cmd> on a key for a list of values which you can use. For example:
hr: Možete pokrenuti <cmd>gsettings range</cmd> naredbu na ključu za prikaz vrijednosti koje možete koristiti. Primjerice:

note: (itstool) path: page/screen
en: $ <input>gsettings range org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type</input>
    enum
    'blank' # blanks the screen
    'suspend' # suspends the system
    'shutdown' # starts a standard shutdown procedure
    'hibernate' # hibernates the system
    'interactive' # shows a pop-up query asking the user what to do
    'nothing' # does nothing
    'logout' # log out from the session
hr: $ <input>gsettings range org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type</input>
    enum
    'blank' # zatamnjuje zaslon
    'suspend' # suspendira računalo
    'shutdown' # pokreće standardnu proceduru isključivanja
    'hibernate' # hibernira računalo
    'interactive' # prikazuje skočni upit koji pita korisnika što učiniti
    'nothing' # ne čini ništa
    'logout' # odjava iz sesije

note: (itstool) path: info/desc
en: Customize which application opens a specific MIME type.
hr: Prilagodba koja aplikacija otvara određenu MIME vrstu.

note: (itstool) path: page/title (itstool) path: steps/title
en: Override the default registered application for all users
hr: Zaobilaženje zadane registrirane aplikacije za sve korisnike

note: (itstool) path: page/p
en: The <file>/usr/share/applications/mimeapps.list</file> and <file>/usr/share/applications/gnome-mimeapps.list</file> files specify which application is registered to open specific MIME types by default. These files are provided by the distribution.
hr: Datoteke <file>/usr/share/applications/mimeapps.list</file> i <file>/usr/share/applications/gnome-mimeapps.list</file> određuju koja je aplikacija registrirana za otvaranje određenih MIME vrsta po zadanome. Ove datoteke omogućuje distribucija.

note: (itstool) path: page/p
en: To override the system defaults for all users on the system, you need to create a <file>/etc/xdg/mimeapps.list</file> or <file>/etc/xdg/gnome-mimeapps.list</file> file with a list of MIME types for which you want to override the default registered application.
hr: Kako bi zaobišli zadane postavke sustava za sve korisnike u sustavu, morate stvoriti <file>/etc/xdg/mimeapps.list</file> ili <file>/etc/xdg/gnome-mimeapps.list</file> datoteku s popisom MIME vrsta za koje želite zaobići zadanu registriranu aplikaciju.

note: (itstool) path: note/p
en: Files located in <file>/etc/xdg/</file> take precedence over files found in <file>/usr/share/applications/</file>. Additionally, <file>/etc/xdg/gnome-mimeapps.list</file> takes precedence over <file>/etc/xdg/mimeapps.list</file>, but can be overridden by the user's configuration in <file>~/.config/mimeapps.list</file>.
hr: Datoteke koje se nalaze u <file>/etc/xdg/</file> imaju prednost nad datotekama koje se nalaze u <file>/usr/share/applications/</file>. Dodatno, <file>/etc/xdg/gnome-mimeapps.list</file> ima prednost nad <file>/etc/xdg/mimeapps.list</file>, ali ga može zaobići korisničko podešavanje u <file> ~/.config/mimeapps.list</file>.

note: (itstool) path: item/p
en: Consult the <file>/usr/share/applications/mimeapps.list</file> file to determine the MIME types for which you want to change the default registered application. For example, the following sample of the <file>mimeapps.list</file> file specifies the default registered application for the <code>text/html</code> and <code>application/xhtml+xml</code> MIME types:
hr: Pogledajte <file>/usr/share/applications/mimeapps.list</file> datoteku kako bi odredili MIME vrste za koje želite promijeniti zadanu registriranu aplikaciju. Primjerice, sljedeći primjer datoteke <file>mimeapps.list</file> određuje zadanu registriranu aplikaciju za <code>text/html</code> i <code>application/xhtml+xml</code> MIME vrste:

note: (itstool) path: item/p
en: The default application (<app>Epiphany</app>) is defined by specifying its corresponding <file>.desktop</file> file (<file>epiphany.desktop</file>). The default location for other applications’ <file>.desktop</file> files is <file>/usr/share/applications/</file>.
hr: Zadana aplikacija (<app>Epiphany</app>) definirana je određivanjem odgovarajuće <file>.desktop</file> datoteke (<file>epiphany.desktop</file>). Zadana lokacija za <file>.desktop</file> datoteke ostalih aplikacija je <file>/usr/share/applications/</file>.

note: (itstool) path: item/p
en: Create the <file>/etc/xdg/mimeapps.list</file> file. In the file, specify the MIME types and their corresponding default registered applications:
hr: Stvorite <file>/etc/xdg/mimeapps.list</file> datoteku. U datoteci navedite MIME vrste i njihove odgovarajuće zadane registrirane aplikacije:

note: (itstool) path: item/code
en: [Default Applications]
    text/html=<var>myapplication1.desktop</var>
    application/xhtml+xml=<var>myapplication2.desktop</var>
    
    [Added Associations]
    text/html=<var>myapplication1.desktop</var>;
    application/xhtml+xml=<var>myapplication2.desktop</var>;
hr: [Default Applications]
    text/html=<var>mojaaplikacija1.desktop</var>
    application/xhtml+xml=<var>mojaaplikacija2.desktop</var>
    
    [Added Associations]
    text/html=<var>mojaaplikacija1.desktop</var>;
    application/xhtml+xml=<var>mojaplikacija2.desktop</var>;

note: (itstool) path: item/p
en: This sets the default registered application for the <code>text/html</code> MIME type to <code>myapplication1.desktop</code>, and the default registered application for the <code>application/xhtml+xml</code> MIME type to <code>myapplication2.desktop</code>.
hr: Ovo postavlja zadanu registriranu aplikaciju za <code>text/html</code> MIME vrstu na <code>mojaaplikacij1.desktop</code>, i zadanu registriranu aplikaciju za <code>application/xhtml+xml</code > MIME vrstu na <code>mojaaplikacija2.desktop</code>.

note: (itstool) path: item/p
en: For these settings to function properly, ensure that both the <file>myapplication1.desktop</file> and <file>myapplication2.desktop</file> files are placed in the <file>/usr/share/applications/</file> directory.
hr: Kako bi ove postavke ispravno funkcionirale, provjerite jesu li datoteke <file>mojaplikacija1.desktop</file> i <file>mojaplikacija2.desktop</file> smještene u <file>/usr/share/applications/</file > direktorij.

note: (itstool) path: item/p
en: You can use the <cmd>gio mime</cmd> command to verify that the default registered application has been set correctly:
hr: Možete koristiti <cmd>gio mime</cmd> naredbu za provjeriu je li zadana registrirana aplikacija ispravno postavljena:

note: (itstool) path: item/screen
en: <output>$ </output><input>gio mime text/html</input>
    Default application for “text/html”: myapplication1.desktop
    Registered applications:
    	myapplication1.desktop
    	epiphany.desktop
    Recommended applications:
    	myapplication1.desktop
    	epiphany.desktop
hr: <output>$ </output><input>gio mime text/html</input>
    Default application for “text/html”: mojaaplikacija1.desktop
    Registered applications:
    	mojaaplikacija1.desktop
    	epiphany.desktop
    Recommended applications:
    	mojaaplikacija1.desktop
    	epiphany.desktop

note: (itstool) path: info/desc
en: Customize per user which application opens a specific MIME type.
hr: Prilagodba koja aplikacija otvara određenu MIME vrstu za pojedinog korisnika.

note: (itstool) path: page/title (itstool) path: steps/title
en: Override the default registered application for individual users
hr: Zaobilaženje zadane registrirane aplikacije za pojedine korisnike

note: (itstool) path: page/p
en: To override the system defaults for individual users, you need to create a <file>~/.config/mimeapps.list</file> file with a list of MIME types for which you want to override the default registered application.
hr: Kako bi zaobišli zadane postavke sustava za pojedine korisnike, morate stvoriti datoteku <file>~/.config/mimeapps.list</file> s popisom MIME vrsta za koje želite zaobići zadanu registriranu aplikaciju.

note: (itstool) path: item/p
en: The default application (<app>Epiphany</app>) is defined by specifying its corresponding <file>.desktop</file> file (<file>epiphany.desktop</file>). The system default location for other applications’ <file>.desktop</file> files is <file>/usr/share/applications/</file>. Individual users’ <file>.desktop</file> files can be stored in <file>~/.local/share/applications/</file>.
hr: Zadana aplikacija (<app>Epiphany</app>) definirana je određivanjem odgovarajuće <file>.desktop</file> datoteke (<file>epiphany.desktop</file>). Zadana lokacija sustava za <file>.desktop</file> datoteke ostalih aplikacija je <file>/usr/share/applications/</file>. <file>.desktop</file> datoteke pojedinih korisnika mogu se pohraniti u <file>~/.local/share/applications/</file>.

note: (itstool) path: item/p
en: Create the <file>~/.config/mimeapps.list</file> file. In the file, specify the MIME types and their corresponding default registered applications:
hr: Stvorite <file>~/.config/mimeapps.list</file> datoteku. U datoteci navedite MIME vrste i njihove odgovarajuće zadane registrirane aplikacije:

note: (itstool) path: item/p
en: For these settings to function properly, ensure that both the <file>myapplication1.desktop</file> and <file>myapplication2.desktop</file> files are placed in the <file>/usr/share/applications/</file> directory. Individual users’ <file>.desktop</file> files can be stored in <file>~/.local/share/applications/</file>.
hr: Kako bi ove postavke ispravno funkcionirale, provjerite jesu li <file>myapplication1.desktop</file> i <file>myapplication2.desktop</file> datoteke smještene u <file>/usr/share/applications/</file > direktorij. <file>.desktop</file> datoteke pojedinih korisnika mogu se pohraniti u <file>~/.local/share/applications/</file>.

note: (itstool) path: info/desc
en: Create a MIME type specification and register a default application.
hr: Stvaranje specifikacija MIME vrste i registracija zadane aplikacije.

note: (itstool) path: page/title
en: Add a custom MIME type for all users
hr: Dodavanje prilagođene MIME vrste za sve korisnike

note: (itstool) path: page/p
en: To add a custom MIME type for all users on the system and register a default application for that MIME type, you need to create a new MIME type specification file in the <file>/usr/share/mime/packages/</file> directory and a <file>.desktop</file> file in the <file>/usr/share/applications/</file> directory.
hr: Kako bi dodali prilagođenu MIME vrstu za sve korisnike u sustavu i registrirali zadanu aplikaciju za tu MIME vrstu, morate stvoriti novu datoteku specifikacije MIME vrste u <file>/usr/share/mime/packages/</file> direktoriju i <file>.desktop</file> datoteku u direktoriju <file>/usr/share/applications/</file>.

note: (itstool) path: steps/title
en: Add a custom <sys>application/x-newtype</sys> MIME Type for All Users
hr: Dodavanje prilagođene <sys>aplikacija/x-novavrsta</sys> MIME vrste za sve korisnike

note: (itstool) path: item/p
en: Create the <file>/usr/share/mime/packages/application-x-newtype.xml</file> file:
hr: Stvorite <file>/usr/share/mime/packages/applikacija-x-novavrsta.xml</file> datoteku:

note: (itstool) path: item/code
en: &lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;mime-info xmlns="http://www.freedesktop.org/standards/shared-mime-info"&gt;
      &lt;mime-type type="application/x-newtype"&gt;
        &lt;comment&gt;new mime type&lt;/comment&gt;
        &lt;glob pattern="*.xyz"/&gt;
      &lt;/mime-type&gt;
    &lt;/mime-info&gt;
hr: &lt;?xml version="1.0" encoding="UTF-8"?&gt;
    &lt;mime-info xmlns="http://www.freedesktop.org/standards/shared-mime-info"&gt;
      &lt;mime-type type="aplikacija/x-novavrsta"&gt;
        &lt;comment&gt;nova mime vrsta&lt;/comment&gt;
        &lt;glob pattern="*.xyz"/&gt;
      &lt;/mime-type&gt;
    &lt;/mime-info&gt;

note: (itstool) path: item/p
en: The sample <file>application-x-newtype.xml</file> file above defines a new MIME type <sys>application/x-newtype</sys> and assigns file names with the <file>.xyz</file> extension to that MIME type.
hr: Primjer <file>aplikacija-x-novavrsta.xml</file> datoteke iznad definira novu MIME vrstu <sys>aplikacija/x-novavrsta</sys> i dodjeljuje nazive datoteka s <file>.xyz</file> datotečnim proširenjem za MIME vrstu.

note: (itstool) path: item/p
en: Create a new <file>.desktop</file> file named, for example, <file>myapplication1.desktop</file>, and place it in the <file>/usr/share/applications/</file> directory:
hr: Stvorite novu <file>.desktop</file> datoteku pod nazivom, primjerice, <file>mojaplikacija1.desktop</file> i smjestite je u direktorij <file>/usr/share/applications/</file>:

note: (itstool) path: item/code
en: [Desktop Entry]
    Type=Application
    MimeType=application/x-newtype
    Name=<var>My Application 1</var>
    Exec=<var>myapplication1</var>
hr: [Desktop Entry]
    Type=Aplikacija
    MimeType=aplikacija/x-novavrsta
    Name=<var>Moja aplikacija 1</var>
    Exec=<var>mojaaplikacija1</var>

note: (itstool) path: item/p
en: The sample <file>myapplication1.desktop</file> file above associates the <sys>application/x-newtype</sys> MIME type with an application named <app>My Application 1</app>, which is run by a command <cmd>myapplication1</cmd>.
hr: Primjer <file>mojaaplikacija1.desktop</file> datoteka iznad pridružuje <sys>aplikacija/x-novavrsta</sys> MIME vrstu s aplikacijom pod nazivom <app>Moja aplikacija 1</app>, koju pokreće naredba <cmd>mojaaplikacija1</cmd>.

note: (itstool) path: item/p
en: As root, update the MIME database for your changes to take effect:
hr: Kao korijenski korisnik, nadopunite MIME bazu podataka kako bi se vaše promjene primijenile:

note: (itstool) path: item/p
en: As root, update the application database:
hr: Kao korijenski korisnik, nadopunite bazu podataka aplikacije:

note: (itstool) path: item/p
en: To verify that you have successfully associated <file>*.xyz</file> files with the <sys>application/x-newtype</sys> MIME type, first create an empty file, for example <file>test.xyz</file>:
hr: Kako bi potvrdili da ste uspješno pridružili <file>*.xyz</file> datoteke s MIME vrstom <sys>aplikacija/x-novavrsta</sys>, prvo stvorite praznu datoteku, primjerice <file>test.xyz</file>:

note: (itstool) path: item/p
en: Then run the <cmd>gio info</cmd> command:
hr: Zatim pokrenite <cmd>gio info</cmd> naredbu:

note: (itstool) path: item/screen
en: <output>$ </output><input>gio info test.xyz | grep "standard::content-type"</input>
      standard::content-type: application/x-newtype
hr: <output>$ </output><input>gio info test.xyz | grep "standard::content-type"</input>
      standard::content-type: aplikacija/x-novavrsta

note: (itstool) path: item/p
en: To verify that <file>myapplication1.desktop</file> has been correctly set as the default registered application for the <sys>application/x-newtype</sys> MIME type, run the <cmd>gio mime</cmd> command:
hr: Kako bi provjerili je li <file>mojaplikacija1.desktop</file> ispravno postavljena kao zadana registrirana aplikacija za <sys>aplikacija/x-novavrsta</sys> MIME vrstu, pokrenite <cmd>gio mime</cmd> naredba:

note: (itstool) path: item/screen
en: <output>$ </output><input>gio mime application/x-newtype</input>
    Default application for “application/x-newtype”: myapplication1.desktop
    Registered applications:
    	myapplication1.desktop
    Recommended applications:
    	myapplication1.desktop
hr: <output>$ </output><input>gio mime aplikacija/x-novavrsta</input>
    Default application for “aplikacija/x-novavrsta”: mojaplikacija1.desktop
    Registered applications:
    	mojaplikacija1.desktop
    Recommended applications:
    	mojaplikacija1.desktop

note: (itstool) path: info/desc
en: Create a user's MIME type specification and register a default application.
hr: Stvaranje specifikacija MIME vrste za korisnika i registracija zadane aplikacije.

note: (itstool) path: page/title
en: Add a custom MIME type for individual users
hr: Dodavanje prilagođene MIME vrste za pojedine korisnike

note: (itstool) path: page/p
en: To add a custom MIME type for individual users and register a default application for that MIME type, you need to create a new MIME type specification file in the <file>~/.local/share/mime/packages/</file> directory and a <file>.desktop</file> file in the <file>~/.local/share/applications/</file> directory.
hr: Kako bi dodali prilagođenu MIME vrstu za pojedine korisnike i registrirali zadanu aplikaciju za tu MIME vrstu, morate stvoriti novu datoteku specifikacije MIME vrste u <file>~/.local/share/mime/packages/</file> direktoriju i <file>.desktop</file> datoteku u <file>~/.local/share/applications/</file> direktoriju.

note: (itstool) path: steps/title
en: Add a custom <code>application/x-newtype</code> MIME type for individual users
hr: Dodavanje prilagođene <code>aplikacija/x-novavrsta</code> MIME vrste za pojedine korisnike

note: (itstool) path: item/p
en: Create the <file>~/.local/share/mime/packages/application-x-newtype.xml</file> file:
hr: Stvorite <file>~/.local/share/mime/packages/applikacija-x-novavrsta.xml</file> datoteku:

note: (itstool) path: item/p
en: Create a new <file>.desktop</file> file named, for example, <file>myapplication1.desktop</file>, and place it in the <file>~/.local/share/applications/</file> directory:
hr: Stvorite novu <file>.desktop</file> datoteku pod nazivom, primjerice, <file>mojaplikacija1.desktop</file> i smjestite je u direktorij <file>~/.local/share/applications/</file>:

note: (itstool) path: item/p
en: The sample <file>myapplication1.desktop</file> file above associates the <code>application/x-newtype</code> MIME type with an application named <app>My Application 1</app>, which is run by a command <cmd>myapplication1</cmd>.
hr: Primjer <file>mojaaplikacija1.desktop</file> datoteka iznad pridružuje <sys>aplikacija/x-novavrsta</sys> MIME vrstu s aplikacijom pod nazivom <app>Moja aplikacija 1</app>, koju pokreće naredba <cmd>mojaaplikacija1</cmd>.

note: (itstool) path: item/p
en: Update the MIME database for your changes to take effect:
hr: Nadopunite MIME bazu podataka kako bi se vaše promjene primijenile:

note: (itstool) path: item/screen
en: <output>$ </output><input>update-mime-database ~/.local/share/mime</input>
hr: <output># </output><input>update-mime-database ~/.local/share/mime</input>

note: (itstool) path: item/p
en: Update the application database:
hr: Nadopunite bazu podataka aplikacije:

note: (itstool) path: item/screen
en: <output>$ </output><input>update-desktop-database ~/.local/share/applications</input>
hr: <output># </output><input>update-desktop-database ~/.local/share/applications</input>

note: (itstool) path: info/desc
en: MIME types are used to identify the format of a file.
hr: MIME vrste se koriste za identifikaciju formata datoteke.

note: (itstool) path: page/title
en: What are MIME types?
hr: Što su MIME vrste?

note: (itstool) path: page/p
en: In GNOME, MIME (<em>Multipurpose Internet Mail Extension</em>) types are used to identify the format of a file. The GNOME Desktop uses MIME types to:
hr: U GNOMU, MIME (<em>Višenamjensko proširenje internetske pošte</em>) vrste koriste se za identifikaciju formata datoteke. GNOME radna površina koristi MIME vrste za:

note: (itstool) path: item/p
en: Determine which application should open a specific file format by default.
hr: Određivanje koja aplikacija treba otvoriti određeni format datoteke po zadanome.

note: (itstool) path: item/p
en: Register other applications that can also open a specific file format.
hr: Registraciju drugih aplikacija koje isto mogu otvoriti određeni format datoteke.

note: (itstool) path: item/p
en: Provide a string describing the type of a file, for example, in a file properties dialog of the <app>Files</app> application.
hr: Upis izraza koji opisuje vrstu datoteke, primjerice, u dijalogu svojstava datoteke aplikacije <app>Datoteke</app>.

note: (itstool) path: item/p
en: Provide an icon representing a specific file format, for example, in a file properties dialog of the <app>Files</app> application.
hr: Određivanje ikone koja predstavlja određeni format datoteke, primjerice, u dijalogu svojstava datoteke aplikacije <app>Datoteke</app>.

note: (itstool) path: page/p
en: MIME type names follow a given format:
hr: Nazivi MIME vrsta slijede zadani format:

note: (itstool) path: page/p
en: <sys>image/jpeg</sys> is an example of a MIME type where <sys>image</sys> is the media type, and <sys>jpeg</sys> is the subtype identifier.
hr: <sys>image/jpeg</sys> je primjer MIME vrste gdje je <sys>image</sys> vrsta medija, a <sys>jpeg</sys> identifikator podvrste.

note: (itstool) path: page/p
en: GNOME follows the <em>freedesktop.org Shared MIME Info</em> specification to determine:
hr: GNOME slijedi <em>freedesktop.org Shared MIME Info</em> specifikaciju kako bi odredio:

note: (itstool) path: item/p
en: The machine-wide and user-specific location to store all MIME type specification files.
hr: Lokacije cijelog sustava i specifičnog korisnika za pohranu svih datoteka specifikacije MIME vrste.

note: (itstool) path: item/p
en: How to register a MIME type so that the desktop environment knows which applications can be used to open a specific file format.
hr: Kako registrirati MIME vrstu tako da okruženje radne površine zna koje se aplikacije mogu koristiti za otvaranje određenog formata datoteke.

note: (itstool) path: item/p
en: How the user can change which applications should open what file formats.
hr: Kako korisnik može promijeniti koje aplikacije trebaju otvarati koje formate datoteka.

note: (itstool) path: section/title
en: What is the MIME database?
hr: Što je MIME baza podataka?

note: (itstool) path: section/p
en: The MIME database is a collection of all MIME type specification files that GNOME uses to store information about known MIME types.
hr: MIME baza podataka je zbirka svih specifikacijskih datoteka MIME vrste koje GNOME koristi za pohranjivanje informacija o poznatim MIME vrstama.

note: (itstool) path: section/p
en: The most important part of the MIME database from the system administrator’s point of view is the <file>/usr/share/mime/packages/</file> directory where the MIME type related files specifying information on known MIME types are stored. One example of such a file is <file>/usr/share/mime/packages/freedesktop.org.xml</file>, specifying information about the standard MIME types available on the system by default. That file is provided by the <sys>shared-mime-info</sys> package.
hr: Najbitniji dio MIME baze podataka sa stajališta administratora sustava je <file>/usr/share/mime/packages/</file> direktorij gdje su pohranjene datoteke povezane s MIME vrstom koje navode informacije o poznatim MIME vrstama. Jedan primjer takve datoteke je <file>/usr/share/mime/packages/freedesktop.org.xml</file>, koja specificira informacije o standardnim MIME vrstama dostupnim na sustavu po zadanome. Tu datoteku osigurava paket <sys>shared-mime-info</sys>.

note: (itstool) path: section/p
en: For detailed information describing the MIME type system, see the <em>freedesktop.org Shared MIME Info specification</em> located at the freedesktop.org website:
hr: Za opširnije informacije koje opisuju sustav MIME vrste, pogledajte <em>freedesktop.org Shared MIME Info specification</em> koja se nalazi na web stranici freedesktop.org:

note: (itstool) path: info/desc
en: <link xref="network-server-list">Configure a default server list</link>, <link xref="network-vpn">default VPN settings</link>…
hr: <link xref="network-server-list">Podešavanje zadanog popisa poslužitelja</link>, <link xref="network-vpn">zadane VPN postavke</link>…

note: (itstool) path: page/title
en: Network &amp; hardware
hr: Mreža i hardver

note: (itstool) path: info/desc
en: How do I make it easy for different users to access different file shares?
hr: Kako se korisnicima može olakšati pristup različitim dijeljenjima datoteka?

note: (itstool) path: page/title
en: Configure a default server list
hr: Podešavanje zadanog popisa poslužitelja

note: (itstool) path: page/p
en: <app>Nautilus</app> (the <app>Files</app> application) stores a list of file-sharing servers in the file <file>~/.config/gtk-3.0/servers</file> in the XBEL format. Add the list of file-sharing servers to that file to make file shares easily accessible to your user.
hr: <app>Nautilus</app> (aplikacija <app>Datoteke</app>) pohranjuje popis poslužitelja za dijeljenje datoteka u datoteci <file>~/.config/gtk-3.0/servers</file> u XBEL format. Dodajte popis poslužitelja za dijeljenje datoteka toj datoteci kako bi dijeljenje datoteka bilo lako dostupno vašem korisniku.

note: (itstool) path: note/p
en: <em>XBEL</em> (<em>XML Bookmark Exchange Language</em>) is an XML standard that lets you share URIs (Uniform Resource Identifiers). In GNOME, XBEL is used to share desktop bookmarks in applications such as <app>Nautilus</app>.
hr: <em>XBEL</em> (<em>XML Bookmark Exchange Language</em>) je XML standard koji omogućuje URI (Uniform Resource Identifiers) dijeljenje. U GNOMU, XBEL se koristi za dijeljenje zabilješki radne površine u aplikacijama poput <app>Nautilusa</app>.

note: (itstool) path: example/p
en: An example of the <file>~/.config/gtk-3.0/servers</file> file:
hr: Primjer <file>~/.config/gtk-3.0/servers</file> datoteke:

note: (itstool) path: example/p
en: In the example above, <app>Nautilus</app> creates a bookmark titled <em>GNOME FTP</em> with the URI <code>ftp://ftp.gnome.org/</code>.
hr: U gornjem primjeru, <app>Nautilus</app> stvara zabilješku pod nazivom <em>GNOME FTP</em> s URI-jem <code>ftp://ftp.gnome.org/</code>.

note: (itstool) path: info/desc
en: How do I preconfigure VPN for all my users?
hr: Kako se predpodešava VPN za sve korisnike?

note: (itstool) path: page/title
en: Default VPN settings
hr: Zadane VPN postavke

note: (itstool) path: page/p
en: <app>NetworkManager</app> stores system-wide connections in the <file>/etc/NetworkManager/system-connections</file> directory. Preconfigured VPN connections can be installed in this directory.
hr: <app>Mrežni upravitelj</app> pohranjuje povezivanja cijelog sustava u <file>/etc/NetworkManager/system-connections</file> direktorij. Predpodešena VPN povezivanja mogu se instalirati u ovaj direktorij.

note: (itstool) path: page/p
en: Here is a sample Cisco VPN configuration:
hr: Ovdje je primjer Cisco VPN podešavanja:

note: (itstool) path: info/desc
en: GSettings overrides are used by distributions to adjust default settings.
hr: GSettings zaobilaženja koriste distribucije za prilagodbu zadanih postavki.

note: (itstool) path: page/title
en: Why should I not use GSettings overrides?
hr: Zašto se ne bi trebala koristiti GSettings zaobilaženja?

note: (itstool) path: page/p
en: GSettings overrides are used by distributions to adjust default settings for the GNOME desktop and apps. dconf overrides were designed for system administrators to adjust default settings and set mandatory settings for the GNOME desktop and apps.
hr: GSettings zaobilaženja koriste distribucije kako bi prilagodile zadane postavke za GNOME radnu površinu i aplikacije. dconf zaobilaženja dizajnirana su za administratore sustava kako bi prilagodili zadane postavke i postavili obavezne postavke za GNOME radnu površinu i aplikacije.

note: (itstool) path: section/title
en: What are vendor overrides?
hr: Što su zaobilaženja proizvođača?

note: (itstool) path: section/p
en: Default values are defined in the schemas that are installed by an application. Sometimes, it is necessary for a vendor or distributor to adjust these defaults.
hr: Zadane vrijednosti definirane su u shemama koje instalira aplikacija. Ponekada je potrebno da proizvođač ili distributer prilagodi te zadane vrijednosti.

note: (itstool) path: section/p
en: Since patching the XML source for the schema is inconvenient and error-prone, <_:link-1/> reads so-called <em>vendor override</em> files. These are keyfiles in the same directory as the XML schema sources, which can override default values.
hr: Budući da je krpanje XML izvora za shemu nezgodno i podložno greškama, <_:link-1/> čita takozvane datoteke <em>zaobilaženja proizvođača</em>. To su datoteke ključeva u istom direktoriju kao i izvori XML sheme, koje mogu zaobići zadane vrijednosti.

note: (itstool) path: info/desc
en: Make the screen dim after a specific amount of time when the user is idle.
hr: Zatamnjenje zaslona nakon određenog vremena kada je korisnik neaktivan.

note: (itstool) path: page/title
en: Dim screen when user is idle
hr: Zatamnjenje zaslona kada je korisnik neaktivan

note: (itstool) path: page/p
en: You can make the computer screen dim after the computer has been idle (not used) for some period of time.
hr: Možete zatamniti zaslon računala nakon što je računalo neko vrijeme bilo u mirovanju (nije korišteno).

note: (itstool) path: steps/title
en: Dim screen on idle computer
hr: Zatamnjenje zaslona na računalu u mirovanju

note: (itstool) path: item/p
en: Create the key file <file>/etc/dconf/db/local.d/00-power</file> to provide information for the <sys>local</sys> database.
hr: Stvorite datoteku ključa <file>/etc/dconf/db/local.d/00-power</file> kako bi pružili informacija za <sys>lokalnu</sys> bazu podataka.

note: (itstool) path: listing/code
en: 
    # Specify the dconf path
    [org/gnome/settings-daemon/plugins/power]
    
    # Enable screen dimming
    idle-dim=true
    
    # Set brightness after dimming
    idle-brightness=30
hr: 
    # Navedite dconf putanju
    [org/gnome/settings-daemon/plugins/power]
    
    # Omogućite zatamnjivanje zaslona
    idle-dim=true
    
    # Postavite svjetlinu nakon zatamnjivanja
    mirovanje-svjetlina=30

note: (itstool) path: item/p
en: Create the key file <file>/etc/dconf/db/local.d/00-session</file> to provide information for the <sys>local</sys> database.
hr: Stvorite datoteku ključa <file>/etc/dconf/db/local.d/00-session</file> kako bi pružili informacija za <sys>lokalnu</sys> bazu podataka.

note: (itstool) path: listing/code
en: 
    # Specify the dconf path
    [org/gnome/desktop/session]
    
    # The number of seconds of inactivity before the session is considered idle
    idle-delay=uint32 300
hr: 
    # Navedite dconf putanju
    [org/gnome/desktop/session]
    
    # Broj sekundi neaktivnosti prije nego što se sesija smatra neaktivnom
    idle-delay=uint32 300

note: (itstool) path: item/p
en: To prevent the user from overriding these settings, create the file <file>/etc/dconf/db/local.d/locks/power-saving</file> with the following content:
hr: Kako bi spriječili korisnika da zaobiđe ove postavke, stvorite datoteku <file>/etc/dconf/db/local.d/locks/power-saving</file> sa sljedećim sadržajem:

note: (itstool) path: listing/code
en: 
    # Lock screen dimming and idle timeout
    /org/gnome/settings-daemon/plugins/power/idle-dim
    /org/gnome/settings-daemon/plugins/power/idle-brightness
    /org/gnome/desktop/session/idle-delay
hr: 
    # Zatamnjivanje zaključanog zaslona i čekanje mirovanja
    /org/gnome/settings-daemon/plugins/power/idle-dim
    /org/gnome/settings-daemon/plugins/power/idle-brightness
    /org/gnome/desktop/session/idle-delay

note: (itstool) path: item/p
en: If you want to let the user change these settings, skip this step.
hr: Ako želite korisniku dopustiti promjenu ovih postavki, preskočite ovaj korak.

note: (itstool) path: info/desc
en: Which processes should I expect to see running in a pristine, stock GNOME session?
hr: Koji pokrenuti procesi se mogu očekivati u neprilagođenoj, standardnoj GNOME sesiji?

note: (itstool) path: page/title
en: Typical processes
hr: Uobičajeni procesi

note: (itstool) path: page/p
en: In a stock <app>GNOME</app> session, programs called daemons or services run on the system as background processes. You should find the following daemons running by default:
hr: U standardnoj <app>GNOME</app> sesiji, programi koji se nazivaju pozadinski programi ili usluge izvode se na sustavu kao pozadinski procesi. Trebali bi pronaći sljedeće pokrenute pozadinske programe po zadanim postavkama:

note: (itstool) path: item/p
en: The <app>dbus-daemon</app> provides a message bus daemon which programs can use to exchange messages with one another. <app>dbus-daemon</app> is implemented with the D-Bus library which provides one-to-one communication between any two applications.
hr: <app>dbus-daemon</app> omogućuje pozadinski program sabirnice poruka koji programi mogu koristiti za međusobnu razmjenu poruka. <app>dbus-daemon</app> implementiran je s D-Bus bibliotekom koja omogućuje komunikaciju jedan-na-jedan između bilo koje dvije aplikacije.

note: (itstool) path: item/p
en: For extended information, see the man page for <link href="man:dbus-daemon">dbus-daemon</link>.
hr: Za opširnije informacije pogledajte <link href="man:dbus-daemon">dbus-daemon</link> stranicu priručnika.

note: (itstool) path: item/p
en: Credentials such as user name and password for various programs and websites are stored securely using the <app>gnome-keyring-daemon</app>. This information is written into an encrypted file called the keyring file and saved in the user's home directory.
hr: Vjerodajnice poput korisničkog imena i lozinke za razne programe i web stranice pohranjuju se na siguran način pomoću <app>gnome-keyring-daemon</app>. Te se informacije zapisuju u šifriranu datoteku koja se naziva datoteka skupa ključeva a sprema se u korisnikov osobni direktorij.

note: (itstool) path: item/p
en: For extended information, see the man page for <_:link-1/>.
hr: Za opširnije informacije pogledajte <_:link-1/> stranicu priručnika.

note: (itstool) path: item/p
en: The <app>gnome-session</app> program is responsible for running the GNOME desktop environment with help of a display manager such as <app>GDM</app>, <app>LightDM</app>, or <app>NODM</app>. The default session for the user is set at the time of system installation by the system administrator. <app>gnome-session</app> typically loads the last session that ran successfully on the system.
hr: <app>gnome-session</app> program odgovoran je za pokretanje GNOME radnog okruženja uz pomoć upravitelja zaslona kao što je <app>GDM</app>, <app>LightDM</app> ili <app> NODM</app>. Zadanu sesiju za korisnika postavlja administrator sustava u trenutku instalacije sustava. <app>gnome-session</app> uobičajeno učitava posljednju sesiju koja se uspješno pokrenula na sustavu.

note: (itstool) path: item/p
en: The <app>gnome-settings-daemon</app> handles settings for a GNOME session and for all programs that are run within the session.
hr: <app>gnome-settings-daemon</app> upravlja postavkama za GNOME sesiju i za sve programe koji se pokreću unutar sesije.

note: (itstool) path: item/p
en: <app>gnome-shell</app> provides the core user interface functionality for GNOME such as launching programs, browsing directories, viewing files and so on.
hr: <app>gnome-shell</app> pruža osnovne funkcije korisničkog sučelja za GNOME poput pokretanja programa, pregledavanja direktorija, pregledavanja datoteka itd..

note: (itstool) path: item/p
en: <app>PulseAudio</app> is a sound server for Linux, POSIX and Windows systems that lets programs output audio via the <app>Pulseaudio</app> daemon.
hr: <app>PulseAudio</app> je zvučni poslužitelj za Linux, POSIX i Windows sustave koji programima omogućuje izlaz zvuka putem <app>Pulseaudio</app> pozadinskog programa.

note: (itstool) path: page/p
en: Depending on the user's setup, you may also see some of the following, among others:
hr: Ovisno o korisničkim postavkama, između ostalog možete vidjeti i nešto od sljedećeg:

note: (itstool) path: list/title
en: Additional Processes
hr: Dodatni procesi

note: (itstool) path: item/p
en: various <app>Evolution</app> factory processes
hr: razni <app>Evolution</app> procesi

note: (itstool) path: item/p
en: various <app>GVFS</app> processes
hr: razni <app>GVFS</app> procesi

note: (itstool) path: info/desc
en: Create a custom session by installing a desktop session file.
hr: Stvaranje prilagođene sesije instaliranjem datoteke radne površine sesije.

note: (itstool) path: page/title
en: Create a custom session
hr: Stvaranje prilagođene sesiju

note: (itstool) path: page/p
en: To create your own session with customized configuration, follow these steps:
hr: Za stvaranje vlastite sesije s prilagođenim podešavanjem, slijedite ove korake:

note: (itstool) path: item/p
en: Create a <file>.desktop</file> file in <file>/etc/X11/sessions/<var>new-session</var>.desktop</file>. Make sure that the file specifies the following entries:
hr: Stvorite <file>.desktop</file> datoteku u <file>/etc/X11/sessions/<var>new-session</var>.desktop</file>. Provjerite sadrži li datoteka sljedeće unose:

note: (itstool) path: item/p
en: The <code>Exec</code> entry specifies the command, possibly with arguments, to execute. You can run the custom session with the <cmd>gnome-session --session=<var>new-session</var></cmd> command.
hr: <code>Exec</code> unos navodi naredbu, po mogućnosti s argumentima, koju treba izvršiti. Prilagođenu sesiju možete pokrenuti pomoću naredbe <cmd>gnome-session --session=<var>new-session</var></cmd>.

note: (itstool) path: item/p
en: For more information on the parameters that you can use with <cmd>gnome-session</cmd>, see the <_:link-1/> man page.
hr: Za više informacija o parametrima koje možete koristiti s <cmd>gnome-session</cmd>, pogledajte <_:link-1/> stranicu priručnika.

note: (itstool) path: item/p
en: Create a custom session file in <file>/usr/share/gnome-session/sessions/<var>new-session</var>.session</file> where you can specify the name and required components for the session:
hr: Stvorite prilagođenu datoteku sesije u <file>/usr/share/gnome-session/sessions/<var>new-session</var>.session</file> gdje možete navesti naziv i potrebne komponente za sesiju:

note: (itstool) path: item/p
en: Note that any item that you specify in <code>RequiredComponents</code> needs to have its corresponding <file>.desktop</file> file in <file>/usr/share/applications/</file>.
hr: Zapamtite da svaka stavka koju navedete u <code>RequiredComponents</code> mora imati odgovarajuću <file>.desktop</file> datoteku u <file>/usr/share/applications/</file>.

note: (itstool) path: page/p
en: After configuring the custom session files, the new session will be available in the session list on the GDM login screen.
hr: Nakon podešavanja prilagođenih datoteka sesije, nova će sesija biti dostupna u popisu sesija na GDM zaslonu prijave.

note: (itstool) path: section/title
en: Known issues
hr: Poznati problemi

note: (itstool) path: section/p
en: On a Debian or Debian-based system, the following error may occur:
hr: Na Debian ili Debian temeljnim sustavima, sljedeća greška može nastati:

note: (itstool) path: section/p
en: Should this happen to you, follow these steps to change the <file>/etc/X11/Xsession.d/20x11-common_process-args</file> file:
hr: Ako vam se ovo dogodi, slijedite ove korake za promjenu <file>/etc/X11/Xsession.d/20x11-common_process-args</file> datoteke:

note: (itstool) path: item/p
en: Change <code>STARTUP_FULL_PATH=$(/usr/bin/which <input>"$1"</input>|| true)</code> to <code>STARTUP_FULL_PATH=$(/usr/bin/which <input>$1</input> || true)</code>
hr: Promijenite <code>STARTUP_FULL_PATH=$(/usr/bin/which <input>"$1"</input>|| true)</code> to <code>STARTUP_FULL_PATH=$(/usr/bin/which <input>$1</input> || true)</code>

note: (itstool) path: item/p
en: Change <code>STARTUP=<input>"$1"</input></code> to <code>STARTUP=<input>$1</input></code>
hr: Promijenite <code>STARTUP=<input>"$1"</input></code> to <code>STARTUP=<input>$1</input></code>

note: (itstool) path: info/desc
en: What happened to <file>~/.xsession-errors</file>?
hr: Što se događa s <file>~/.xsession-errors</file>?

note: (itstool) path: page/title
en: Debug session problems
hr: Problemi otklanjanja grešaka sesije

note: (itstool) path: page/p
en: If you want to find more information about a problem in a session or want to fix it, consult the system log, which stores log data for your user session and applications.
hr: Ako želite potražiti više informacija o problemu u sesiji ili ga želite popraviti, pogledajte zapis sustava, koji bilježi podatke zapisa za vašu korisničku sesiju i aplikacije.

note: (itstool) path: page/p
en: The <file>~/.xsession-errors</file> X session log file has been deprecated and is no longer used.
hr: Datoteka zapisa X sesije <file>~/.xsession-errors</file> zastarjela je i više se ne koristi.

note: (itstool) path: section/title
en: View session log on systemd-based systems
hr: Pregledavanje zapisa sesije temeljenim na systemd sustavima

note: (itstool) path: section/p
en: On systemd-based systems, you can find the session log data in the <app>systemd</app> journal, which stores the data in a binary format. To view the logs, use the <cmd>journalctl</cmd> command.
hr: Na systemd temeljenim sustavima, možete pronaći podatke zapisa sesije u <app>systemd</app> dnevniku, koji pohranjuje podatke u binarnom formatu. Za pregled zapisa koristite naredbu <cmd>journalctl</cmd>.

note: (itstool) path: steps/title
en: To view your user session logs:
hr: Za pregled zapisa korisničkih sesija:

note: (itstool) path: item/p
en: Determine your user ID (<sys>uid</sys>) by running the following command:
hr: Utvrdite svoj korisnički ID (<sys>uid</sys>) pokretanjem sljedeće naredbe:

note: (itstool) path: item/p
en: View the journal logs for the user ID determined above:
hr: Pogledajte zapis dnevnika za korisnički ID koji je gore utvrđen:

note: (itstool) path: section/p
en: For more information on the systemd journal, see the <_:link-1/> man page.
hr: Za više informacija o systemd dnevniku, pogledajte <_:link-1/> stranicu priručnika.

note: (itstool) path: info/desc
en: Specify the default session for a user.
hr: Određivanje zadane sesije za korisnika.

note: (itstool) path: page/title
en: Configure a user default session
hr: Podešavanje zadane sesije korisnika

note: (itstool) path: page/p
en: The default session is retrieved from a program called <app>AccountsService</app>. <app>AccountsService</app> stores this information in the <file>/var/lib/AccountsService/users/</file> directory.
hr: Zadana sesija određuje se programom zvanim <app>AccountsService</app>. <app>AccountsService</app> pohranjuje ove informacije u <file>/var/lib/AccountsService/users/</file> direktorij.

note: (itstool) path: note/p
en: In GNOME 2, the <file>.dmrc</file> file in the user home directory was used to create default sessions. This <file>.dmrc</file> file is no longer used.
hr: U GNOME 2, <file>.dmrc</file> datoteka u osobnom direktoriju korisnika korištena je za stvaranje zadanih sesija. Ova <file>.dmrc</file> datoteka se više ne koristi.

note: (itstool) path: steps/title
en: Specify a default session for a user
hr: Određivanje zadane sesije za korisnika

note: (itstool) path: item/p
en: Make sure that you have the <sys>gnome-session-xsession</sys> package installed on your system.
hr: Provjerite imate li instaliran <sys>gnome-session-xsession</sys> paket na vašem sustavu.

note: (itstool) path: item/p
en: Navigate to the <file>/usr/share/xsessions</file> directory where you can find <file>.desktop</file> files for each of the available sessions. Consult the contents of the <file>.desktop</file> files to determine the session you want to use.
hr: Idite do <file>/usr/share/xsessions</file> direktorija gdje možete pronaći <file>.desktop</file> datoteke za svaku od dostupnih sesija. Pogledajte sadržaj <file>.desktop</file> datoteka kako bi odabrali sesiju koju želite koristiti.

note: (itstool) path: item/p
en: To specify a default session for a user, update the user’s <sys>account service</sys> in the <file>/var/lib/AccountsService/users/<var>username</var></file> file:
hr: Kako bi odredili zadanu sesiju za korisnika, nadopunite korisničku <sys>uslugu računa</sys> u <file>/var/lib/AccountsService/users/<var>korisničkoime</var></file> datoteci:

note: (itstool) path: item/p
en: In this sample, <link href="help:gnome-help/gnome-classic">GNOME Classic</link> has been set as the default session, using the <file>/usr/share/xsessions/gnome-classic.desktop</file> file.
hr: U ovom primjeru, <link href="help:gnome-help/gnome-classic">GNOME Classic</link> je postavljen kao zadana sesija, koristeći <file>/usr/share/xsessions/gnome-classic.desktop</file> datoteku.

note: (itstool) path: page/p
en: After specifying a default session for the user, that session will be used the next time the user logs in, unless the user selects a different session from the login screen.
hr: Nakon određivanja zadane sesije korisnika, ta će se sesija koristiti sljedeći puta kada se korisnik prijavi, osim ako korisnik ne odabere drugu sesiju na zaslonu prijave.

note: (itstool) path: info/desc
en: User and system settings management.
hr: Upravljanje postavkama korisnika i sustava.

note: (itstool) path: page/title
en: Setup
hr: Postavljanje

note: (itstool) path: info/desc
en: <link xref="extensions">GNOME Shell extensions</link>, <link xref="mime-types">MIME types</link>, <link xref="mime-types-application">override default applications</link>…
hr: <link xref="extensions">Proširenja GNOME ljuske</link>, <link xref="mime-types">MIME vrste</link>, <link xref="mime-types-application">zaobilaženje zadanih aplikacija</link>…

note: (itstool) path: page/title
en: Software
hr: Softver

note: (itstool) path: section/title
en: Extensions
hr: Proširenja

note: (itstool) path: info/desc
en: Session management and troubleshooting.
hr: Upravljanje sesijom i rješavanje problema.

note: (itstool) path: page/title
en: Other
hr: Ostalo

note: (itstool) path: section/title
en: Session
hr: Sesija

note: (itstool) path: info/desc
en: <link xref="power-dim-screen">Dim screen</link>, <link xref="lockdown-online-accounts">allow or disallow online accounts</link>, <link xref="lockdown-printing">disable printing</link>…
hr: <link xref="power-dim-screen">Zatamnjenje zaslona</link>, <link xref="lockdown-online-accounts">omogućavanje ili onemogućavanje mrežnih računa</link>, <link xref="lockdown-printing">omogućavanje ispisivanja</link>…

note: (itstool) path: page/title
en: User settings
hr: Korisničke postavke

note: (itstool) path: section/title
en: Lock down settings
hr: Postavke zaključavanja
