grub2 1.97-2 - en to hr translation catalogue (41 entries)

note: Type: boolean Description
en: Chainload from menu.lst?
hr: Učitaj ulančano preko menu.lst?

note: Type: boolean Description
en: GRUB upgrade scripts have detected a GRUB Legacy setup in /boot/grub.
hr: Skripte za nadogradnju GRUB-a su pronašle GRUB Legacy postavke u /boot/grub.

note: Type: boolean Description
en: In order to replace the Legacy version of GRUB in your system, it is recommended that /boot/grub/menu.lst is adjusted to load a GRUB 2 boot image from your existing GRUB Legacy setup. This step can be automatically performed now.
hr: Kako bi zamijenili Legacy verziju GRUB-a na vašem sustavu, preporučuje se prilagodba /boot/grub/menu.lst kako bi se ulančano učitao GRUB 2 iz vaših postojećih GRUB Legacy postavki. Ovaj korak se sada može automatski izvršiti.

note: Type: boolean Description
en: It's recommended that you accept chainloading GRUB 2 from menu.lst, and verify that the new GRUB 2 setup works before it is written to the MBR (Master Boot Record).
hr: Preporučuje se da prihvatite ulančano učitavanje GRUB 2 iz menu.lst, tako da možete provjeriti da vam nove GRUB 2 postavke funkcioniraju, prije nego što izravno instalirate GRUB2 u MBR (Master Boot Record).

note: Type: boolean Description
en: Whatever your decision, you can replace the old MBR image with GRUB 2 later by issuing the following command as root:
hr: Što god odlučite, možete zamijeniti stari sadržaj MBR-a sa GRUB 2 kasnije pokretanjem sljedeće naredbe kao root:

note: Type: multiselect Description
en: GRUB install devices:
hr: GRUB uređaji za instalaciju:

note: Type: multiselect Description
en: The grub-pc package is being upgraded. This menu allows you to select which devices you'd like grub-install to be automatically run for, if any.
hr: Paket grub-pc se nadograđuje. Ovaj izbornik omogućava biranje uređaja za koje želite automatski pokrenuti grub-install, ako postoje.

note: Type: multiselect Description
en: Running grub-install automatically is recommended in most situations, to prevent the installed GRUB core image from getting out of sync with GRUB modules or grub.cfg.
hr: Automatsko pokretanje grub-install je preporučeno u većini slučajeva kako bi instalirana GRUB osnovna slika bila sinkronizirana s GRUB modulima ili grub.cfg.

note: Type: multiselect Description
en: If you're unsure which drive is designated as boot drive by your BIOS, it is often a good idea to install GRUB to all of them.
hr: Ako niste sigurni koji je uređaj u BIOS-u određen za učitavanje, obično je dobra ideja instalirati GRUB na svaki.

note: Type: multiselect Description
en: Note: it is possible to install GRUB to partition boot records as well, and some appropriate partitions are offered here. However, this forces GRUB to use the blocklist mechanism, which makes it less reliable, and therefore is not recommended.
hr: Napomena: moguće je instalirati GRUB u particijski boot zapis, ovdje su navedene neke odgovarajuće particije. Međutim, to prisiljava GRUB na korištenje mehanizma blokiranja, što može biti manje pouzdano i zato se ne preporučuje.

note: Type: multiselect Description
en: The GRUB boot loader was previously installed to a disk that is no longer present, or whose unique identifier has changed for some reason. It is important to make sure that the installed GRUB core image stays in sync with GRUB modules and grub.cfg. Please check again to make sure that GRUB is written to the appropriate boot devices.
hr: GRUB boot učitavač je prethodno instaliran na disk koji više nije prisutan, ili se njegov jedinstveni identifikator iz nekog razloga promijenio. Važno je osigurati da instalirana GRUB osnovna slika ostane sikronizirana s GRUB modulima i grub.cfg. Molim ponovo provjerite je li GRUB instaliran na odgovarajuće boot uređaje.

note: Type: boolean Description
en: Writing GRUB to boot device failed - continue?
hr: Instalacija GRUB-a nije uspjela - želite li nastaviti?

note: Type: boolean Description
en: GRUB failed to install to the following devices:
hr: GRUB nije uspješno instaliran na sljedeće uređaje:

note: Type: boolean Description
en: Do you want to continue anyway? If you do, your computer may not start up properly.
hr: Želite li ipak nastaviti? Ako to napravite, vaše računalo se možda neće moći uredno pokrenuti.

note: Type: boolean Description
en: Writing GRUB to boot device failed - try again?
hr: Instalacija GRUB-a nije uspjela. Pokušati ponovo?

note: Type: boolean Description
en: You may be able to install GRUB to some other device, although you should check that your system will boot from that device. Otherwise, the upgrade from GRUB Legacy will be canceled.
hr: Možda možete instalirati GRUB na neki drugi uređaj, iako biste morali provjeriti da se vaš sustav može podizati s tog uređaja. U suprotnom, nadogradnja s GRUB Legacy će biti prekinuta.

note: Type: boolean Description
en: Continue without installing GRUB?
hr: Nastaviti bez instalacije GRUB-a?

note: Type: boolean Description
en: You chose not to install GRUB to any devices. If you continue, the boot loader may not be properly configured, and when this computer next starts up it will use whatever was previously in the boot sector. If there is an earlier version of GRUB 2 in the boot sector, it may be unable to load modules or handle the current configuration file.
hr: Odabrali ste da ne instalirate GRUB ni na jedan uređaj. Ako nastavite, boot učitavač neće biti ispravno podešen, a kada se vaše računalo idući put upali, koristit će što god je prethodno bilo u boot sektoru. Ako se tamo nalazi ranija verzija GRUB 2, možda će doći do problema s učitavanjem modula ili čitanjem trenutne datoteke postavki.

note: Type: boolean Description
en: If you are already using a different boot loader and want to carry on doing so, or if this is a special environment where you do not need a boot loader, then you should continue anyway. Otherwise, you should install GRUB somewhere.
hr: Ako već imate neki drugi boot učitavač i želite ga zadržati, ili ako je ovo neko posebno okruženje gdje ne trebate boot učitavač, trebate nastaviti. Inače biste morali negdje instalirati GRUB.

note: Type: boolean Description
en: Remove GRUB 2 from /boot/grub?
hr: Želite li ukloniti GRUB 2 iz /boot/grub?

note: Type: boolean Description
en: Do you want to have all GRUB 2 files removed from /boot/grub?
hr: Želite li ukloniti sve GRUB 2 datoteke iz /boot/grub?

note: Type: boolean Description
en: This will make the system unbootable unless another boot loader is installed.
hr: Ovo će onemogućiti učitavanje sustava ako nije instaliran drugi boot učitavač.

note: Type: boolean Description
en: Finish conversion to GRUB 2 now?
hr: Završiti prebacivanje na GRUB 2?

note: Type: boolean Description
en: This system still has files from the GRUB Legacy boot loader installed, but it now also has GRUB 2 boot records installed on these disks:
hr: Ovaj sustav još uvijek ima instalirane datoteke GRUB Legacy boot učitavača, ali sada ima i GRUB 2 boot zapise instalirane na ovim diskovima:

note: Type: boolean Description
en: It seems likely that GRUB Legacy is no longer in use, and that you should instead upgrade the GRUB 2 images on these disks and finish the conversion to GRUB 2 by removing old GRUB Legacy files. If you do not upgrade these GRUB 2 images, then they may be incompatible with the new packages and cause your system to stop booting properly.
hr: Vjerojatno je GRUB Legacy izbačen iz uporabe i trebali biste nadograditi na GRUB 2 snimke na ovim diskovima te završiti prebacivanje brisanjem starih GRUB Legacy datoteka. Ako niste nadogradili ove GRUB 2 snimke, onda bi one mogle biti nekompatibilne s novim verzijama paketa, što bi moglo uzrokovati nemogućnost ispravnog pokretanja sustava.

note: Type: boolean Description
en: You should generally finish the conversion to GRUB 2 unless these boot records were created by a GRUB 2 installation on some other operating system.
hr: Općenito, trebali biste dovršiti nadogradnju na GRUB 2, osim ako su navedeni boot zapisi napravljeni instalacijom GRUB 2 na nekom drugom operacijskom sustavu.

note: Type: string Description
en: Linux command line:
hr: Linux naredbeni redak:

note: Type: string Description
en: The following Linux command line was extracted from /etc/default/grub or the `kopt' parameter in GRUB Legacy's menu.lst. Please verify that it is correct, and modify it if necessary. The command line is allowed to be empty.
hr: Ovaj naredbeni redak za sam Linux kernel je preuzet iz /etc/default/grub ili iz parametra 'kopt' u GRUB Legacy datoteci menu.lst. Molim provjerite je li ispravan i, ako je potrebno, uredite ga. Naredbeni redak smije biti prazan.

note: Type: string Description
en: Linux default command line:
hr: Pretpostavljeni Linux naredbeni redak:

note: Type: string Description
en: The following string will be used as Linux parameters for the default menu entry but not for the recovery mode.
hr: Sljedeći izraz će se koristiti kao parametar za Linux stavke u izborniku, osim za spasonosni način rada.

note: Type: boolean Description
en: Force extra installation to the EFI removable media path?
hr: Prisilno dodatno instalirati u EFI direktorij prijenosnog medija?

note: Type: boolean Description
en: Some EFI-based systems are buggy and do not handle new bootloaders correctly. If you force an extra installation of GRUB to the EFI removable media path, this should ensure that this system will boot Debian correctly despite such a problem. However, it may remove the ability to boot any other operating systems that also depend on this path. If so, you will need to make sure that GRUB is configured successfully to be able to boot any other OS installations correctly.
hr: Neki EFI sustavi imaju bugove i ne rade ispravno s novim boot učitavačima. Ako prisilno dodatno instalirate GRUB u EFI direktorij prijenosnog medija, sustav bi trebao ispravno učitati Debian unatoč navedenom problemu. Međutim, to može onemogućiti učitavanje ostalih operacijskih sustava koji također ovise o ovom direktoriju. Ako je tako, morat ćete osigurati da je GRUB uspješno postavljen za ispravno učitavanje ostalih instaliranih operacijskih sustava.

note: Type: boolean Description
en: Update NVRAM variables to automatically boot into Debian?
hr: Ažurirati NVRAM varijable za automatsko učitavanje Debiana?

note: Type: boolean Description
en: GRUB can configure your platform's NVRAM variables so that it boots into Debian automatically when powered on. However, you may prefer to disable this behavior and avoid changes to your boot configuration. For example, if your NVRAM variables have been set up such that your system contacts a PXE server on every boot, this would preserve that behavior.
hr: GRUB može postaviti NVRAM varijable vaše platforme da se automatski učita Debian pri uključivanju. Međutim, možda će vam biti praktičnije onemogućiti ovakvo ponašanje i izbjeći promjene vaših postavki. Na primjer, ako su vaše NVRAM varijable postavljene tako da se vaš sustav povezuje s PXE poslužiteljem pri svakom učitavanju, ovo će očuvati takvo ponašanje.

note: Type: boolean Description
en: Run os-prober automatically to detect and boot other OSes?
hr: Pokrenuti os-prober za automatsko traženje i učitavanje drugih operacijskih sustava?

note: Type: boolean Description
en: GRUB can use the os-prober tool to attempt to detect other operating systems on your computer and add them to its list of boot options automatically.
hr: GRUB može alatom os-prober pokušati pronaći druge operacijske sustave na Vašem računalu i automatski ih dodati na popis za učitavanje.

note: Type: boolean Description
en: If your computer has multiple operating systems installed, then this is probably what you want. However, if your computer is a host for guest OSes installed via LVM or raw disk devices, running os-prober can cause damage to those guest OSes as it mounts filesystems to look for things.
hr: Ovo vjerojatno želite ako je na Vašem računalu instalirano više operacijskih sustava. Međutim, budući da alat pokušava montirati datotečne sustave kako bi pronašao druge operacijske sustave, u slučaju kada su na računalu instalirani virtualni operacijski sustavi na LVM ili 'neobrađene' diskove, može doći do njihovog oštećenja.

note: Type: string Description
en: kFreeBSD command line:
hr: kFreeBSD naredbeni redak:

note: Type: string Description
en: The following kFreeBSD command line was extracted from /etc/default/grub or the `kopt' parameter in GRUB Legacy's menu.lst. Please verify that it is correct, and modify it if necessary. The command line is allowed to be empty.
hr: Ovaj naredbeni redak za kFreeBSD kernel je preuzet iz /etc/default/grub ili iz parametra 'kopt' u GRUB Legacy datoteci menu.lst. Molim provjerite je li ispravan i, ako je potrebno, uredite ga. Naredbeni redak smije biti prazan.

note: Type: string Description
en: kFreeBSD default command line:
hr: Pretpostavljeni kFreeBSD naredbeni redak:

note: Type: string Description
en: The following string will be used as kFreeBSD parameters for the default menu entry but not for the recovery mode.
hr: Sljedeći izraz će se koristiti kao parametar za kFreeBSD stavke u izborniku, osim za spasonosni način rada.
