grub2 1.98+2010804-2 - en to sr translation catalogue (35 entries)

note: Type: boolean Description
en: Chainload from menu.lst?
sr: Čeinloud iz „menu.lst“?

note: Type: boolean Description
en: GRUB upgrade scripts have detected a GRUB Legacy setup in /boot/grub.
sr: GRUB skripte za apgrejd su pronašle podešavanja za GRUB Legacy u /boot/grub folderu.

note: Type: boolean Description
en: In order to replace the Legacy version of GRUB in your system, it is recommended that /boot/grub/menu.lst is adjusted to load a GRUB 2 boot image from your existing GRUB Legacy setup. This step can be automatically performed now.
sr: Da biste zamenili Legacy verziju GRUB-a u vašem sistemu, preporučuje se da se /boot/grub/menu.lst fajl prilagodi da učitava GRUB 2 sliku za pokretanje iz postojećeg GRUB Legacy podešavanja. Ovaj korak može automatski sada da se izvrši.

note: Type: boolean Description
en: It's recommended that you accept chainloading GRUB 2 from menu.lst, and verify that the new GRUB 2 setup works before it is written to the MBR (Master Boot Record).
sr: Preporučljivo je da prihvatite učitavanje GRUB 2 iz menu.lst, i potvrdite da nova GRUB 2 podešavanja rade pre nego što se zapišu na MBR (Master Boot Record).

note: Type: boolean Description
en: Whatever your decision, you can replace the old MBR image with GRUB 2 later by issuing the following command as root:
sr: Koja god da je vaša odluka, možete zameniti stari MBR sa GRUB-om 2 kasnije pokretanjem sledeće komande kao rut:

note: Type: multiselect Description
en: GRUB install devices:
sr: Uređaji za instaliranje GRUB-a:

note: Type: multiselect Description
en: The grub-pc package is being upgraded. This menu allows you to select which devices you'd like grub-install to be automatically run for, if any.
sr: Paket grub-pc se apgrejduje. Ovaj meni vam dozvoljava da izaberete za koje uređaje će grub-install automatski da se pokrene.

note: Type: multiselect Description
en: Running grub-install automatically is recommended in most situations, to prevent the installed GRUB core image from getting out of sync with GRUB modules or grub.cfg.
sr: Pokretanje grub-install programa automatski je preporučeno u većini situacija, da spreči instaliranu GRUB sržnu sliku da izbegne sinhronizaciju sa GRUB modulima ili grub.cfg.

note: Type: multiselect Description
en: If you're unsure which drive is designated as boot drive by your BIOS, it is often a good idea to install GRUB to all of them.
sr: Ako niste sigurni koji drajver je dizajniran kao pokretački drajver u BIOS-u, najčešće je dobra ideja da se instalira GRUB na sve drajvere.

note: Type: multiselect Description
en: Note: it is possible to install GRUB to partition boot records as well, and some appropriate partitions are offered here. However, this forces GRUB to use the blocklist mechanism, which makes it less reliable, and therefore is not recommended.
sr: Moguće je takođe instalirati GRUB u but rekord particija, i neke od odgovarajućih particija su ponuđene ovde. Međutim, GRUB tada koristi bloklist mehanizam, koji je manje pouzdan i ne preporučuje se.

note: Type: multiselect Description
en: The GRUB boot loader was previously installed to a disk that is no longer present, or whose unique identifier has changed for some reason. It is important to make sure that the installed GRUB core image stays in sync with GRUB modules and grub.cfg. Please check again to make sure that GRUB is written to the appropriate boot devices.
sr: GRUB je prethodno bio instaliran na disku koji ne postoji, ili čiji se jedinstveni identifikacioni broj promenio iz nekog razloga. Bitno je da podaci GRUB-a budu sinhronizovani sa modulima i fajlom grub.cfg. Proverite da li je GRUB instaliran na odgovarajućem uređaju.

note: Type: text Description Disk sizes are in decimal megabytes, to match how disk manufacturers usually describe them.
en: ${DEVICE} (${SIZE} MB; ${MODEL})
sr: ${DEVICE} (${SIZE} MB, ${MODEL})

note: Type: boolean Description
en: Writing GRUB to boot device failed - continue?
sr: Instalacija GRUB-a nije uspela - nastaviti?

note: Type: boolean Description
en: GRUB failed to install to the following devices:
sr: Instalacija GRUB-a nije uspela na sledećim uređajima:

note: Type: boolean Description
en: Do you want to continue anyway? If you do, your computer may not start up properly.
sr: Da li želite da nastavite u svakom slučaju?  Ako nastavite, vaš računar se možda neće dobro pokrenuti.

note: Type: boolean Description
en: Writing GRUB to boot device failed - try again?
sr: Instalacija GRUB-a nije uspela - pokušati ponovo?

note: Type: boolean Description
en: You may be able to install GRUB to some other device, although you should check that your system will boot from that device. Otherwise, the upgrade from GRUB Legacy will be canceled.
sr: Možda možete da instalirate GRUB na neki drugi uređaj, mada trebate da proverite da li će se vaš sistem pokrenuti sa tog uređaja. Inače će se apgrejd GRUB Legacy-a otkazati.

note: Type: boolean Description
en: Continue without installing GRUB?
sr: Nastaviti bez instaliranja GRUB-a?

note: Type: boolean Description
en: You chose not to install GRUB to any devices. If you continue, the boot loader may not be properly configured, and when this computer next starts up it will use whatever was previously in the boot sector. If there is an earlier version of GRUB 2 in the boot sector, it may be unable to load modules or handle the current configuration file.
sr: Odabrali ste da ne instalirate GRUB ni na jedan uređaj. Ako nastavite, but učitavač možda neće biti ispravno podešen, akada se ovaj računar sledeći put upali, koristiće se šta god da je prethodno bilo u but sektoru. Ako se tamo nalazi ranijaverzija GRUB 2, možda će doći do problema sa učitavanjem modula ili čitanjem trenutne datoteke postavki.

note: Type: boolean Description
en: If you are already using a different boot loader and want to carry on doing so, or if this is a special environment where you do not need a boot loader, then you should continue anyway. Otherwise, you should install GRUB somewhere.
sr: Ako već imate neki drugi but učitavač i želite ga zadržati, ili ako je ovo neko posebno okruženje gde ne treba but učitavač, možete nastaviti. U suprotnom, morali biste negde instalirati GRUB.

note: Type: boolean Description
en: Remove GRUB 2 from /boot/grub?
sr: Ukloniti GRUB 2 iz /boot/grub foldera?

note: Type: boolean Description
en: Do you want to have all GRUB 2 files removed from /boot/grub?
sr: Da li želite da sve GRUB 2 fajlove uklonite iz /boot/grub foldera?

note: Type: boolean Description
en: This will make the system unbootable unless another boot loader is installed.
sr: Ovo će učiniti da sistem ne može da se pokrene osim ako drugi pokretački program nije instaliran.

note: Type: boolean Description
en: Finish conversion to GRUB 2 now?
sr: Završiti konverziju na GRUB 2 sada?

note: Type: boolean Description
en: This system still has files from the GRUB Legacy boot loader installed, but it now also has GRUB 2 boot records installed on these disks:
sr: Ovaj sistem još uvek ima inastalirane fajlove sa GRUB Legacy pokretačkog programa, ali sada sadrži GRUB 2 pokretačke podatke instalirane na sledećim diskovima:

note: Type: boolean Description
en: It seems likely that GRUB Legacy is no longer in use, and that you should instead upgrade the GRUB 2 images on these disks and finish the conversion to GRUB 2 by removing old GRUB Legacy files. If you do not upgrade these GRUB 2 images, then they may be incompatible with the new packages and cause your system to stop booting properly.
sr: Izgleda da GRUB Legacy nije više u upotrebi, umesto toga trebali biste nadograditi na GRUB 2 na diskovima, a takođe samo prebacivanje na GRUB 2 uključuje i brisanje starih GRUB Legacy datoteka. Ako niste nadogradili na GRUB 2, onda bi moglo doći do nekompatibilnosti sa novijim verzijama paketa, što bi dalje moglo dovesti i do nemogućnosti ispravnog pokretanja sistema.

note: Type: boolean Description
en: You should generally finish the conversion to GRUB 2 unless these boot records were created by a GRUB 2 installation on some other operating system.
sr: Trebali biste da zabršite konverziju na GRUB 2, osim ako su ovi pokretački podaci kreirani od GRUB 2 instalacije na nekom drugom operativnom sistemu.

note: Type: string Description
en: Linux command line:
sr: Linux komandna linija:

note: Type: string Description
en: The following Linux command line was extracted from /etc/default/grub or the `kopt' parameter in GRUB Legacy's menu.lst. Please verify that it is correct, and modify it if necessary. The command line is allowed to be empty.
sr: Ova linija namenjena za Linux kernel je iz /etc/default/grub (GRUB 2) ili iz „kopt“ parametra datoteke menu.lst (GRUB Legacy). Proverite da li je linija ispravna i ako treba popravite je. Linija inače, može ostati i prazna.

note: Type: string Description
en: Linux default command line:
sr: Linux podrazumevajuća komanda linija:

note: Type: string Description
en: The following string will be used as Linux parameters for the default menu entry but not for the recovery mode.
sr: Sledeći string će biti upotrebljen kao Linux parametri za podreazumevano pokretanje, ali ne i za mod za popravku.

note: Type: string Description
en: kFreeBSD command line:
sr: kFreeBSD komandna linija:

note: Type: string Description
en: The following kFreeBSD command line was extracted from /etc/default/grub or the `kopt' parameter in GRUB Legacy's menu.lst. Please verify that it is correct, and modify it if necessary. The command line is allowed to be empty.
sr: Ova linija namenjena kFreeBSD kernelu je iz /etc/default/grub (GRUB 2) ili iz „kopt“ parametra datoteke menu.lst (GRUB Legacy). Proverite da li je linija ispravna i ako treba popravite je. Linija inače, može ostati i prazna.

note: Type: string Description
en: kFreeBSD default command line:
sr: kFreeBSD podrazumevajuća komandna linija:

note: Type: string Description
en: The following string will be used as kFreeBSD parameters for the default menu entry but not for the recovery mode.
sr: Sledeći string će biti upotrebljen kao kFreeBSD parametri za podreazumevano pokretanje, ali ne i za mod za popravku.
