en to es translation catalogue (140 entries)

note: Translators: This is the menu entry to select when one wants to input only Simplified Chinese. Translators: This is the setting to use only simplified Chinese
en: Simplified Chinese
es: Chino simplificado

en: Switch to “Simplified Chinese only”.
es: Cambiar al modo «solo chino simplificado».

note: Translators: This is the menu entry to select when one wants to input only Traditonal Chinese Translators: This is the setting to use only traditional Chinese
en: Traditional Chinese
es: Chino tradicional

en: Switch to “Traditional Chinese only”.
es: Cambiar al modo «solo chino tradicional».

note: Translators: This is the menu entry to select when one wants to input both Simplified and Traditional Chinese but wants the Simplified Chinese to be preferred, i.e. shown higher up in the candidate lists.
en: Simplified Chinese first
es: Chino simplificado primero

en: Switch to “Simplified Chinese before traditional”.
es: Cambiar al modo «chino simplificado antes que el tradicional».

note: Translators: This is the menu entry to select when one wants to input both Simplified and Traditional Chinese but wants the Traditional Chinese to be preferred, i.e. shown higher up in the candidate lists.
en: Traditional Chinese first
es: Chino tradicional primero

en: Switch to “Traditional Chinese before simplified”.
es: Cambiar al modo «chino tradicional antes que el simplificado».

note: Translators: This is the menu entry to select when one wants to input both Simplified and Traditional Chinese and has no particular preference whether simplified or traditional characters should be higher up in the candidate lists. Translators: This is the setting to use both simplified and traditio
en: All Chinese characters
es: Todos los caracteres chinos

en: Switch to “All Chinese characters”.
es: Cambiar al modo «todos los caracteres chinos».

en: Chinese mode
es: Modo chino

en: Switch Chinese mode
es: Cambiar al modo chino

en: English
es: Inglés

en: Switch to English input
es: Cambiar a la entrada en inglés

en: Chinese
es: Chino

en: Switch to Chinese input
es: Cambiar a la entrada en chino

en: Direct
es: Directa

en: Switch to direct input
es: Cambiar a la entrada directa

en: Table
es: Tabla

en: Switch to table input
es: Cambiar a la entrada por tabla

en: Input mode
es: Modo de entrada

en: Switch Input mode
es: Cambiar el modo de entrada

note: Translators: This is the mode to use half width letters while in “Table input” mode. Translators: This is the mode to use half width punctuation while in “Direct input” mode.
en: Half
es: Media

en: Switch to halfwidth letters
es: Cambiar a caracteres de anchura media

note: Translators: This is the mode to use full width letters while in “Table input” mode. Translators: This is the mode to use full width punctuation while in “Direct input” mode.
en: Full
es: Completa

en: Switch to fullwidth letters
es: Cambia a caracteres de anchura completa

en: Letter width
es: Anchura de caracteres

en: Switch letter width
es: Cambiar la anchura de caracteres

en: Switch to halfwidth punctuation
es: Cambiar a puntuación de anchura media

en: Switch to fullwidth punctuation
es: Cambiar a puntuación de anchura completa

en: Punctuation width
es: Anchura de puntuación

en: Switch punctuation width
es: Cambiar la anchura de la puntuación

en: Switch to table mode
es: Cambiar a modo por tabla

en: Switch to pinyin mode
es: Cambia al modo pinyin

en: Pinyin mode
es: Modo pinyin

en: Switch pinyin mode
es: Cambia el modo pinyin

en: Suggestion disabled
es: Sugerencia desactivada

en: Switch to suggestion mode
es: Cambiar al modo de sugerencias

en: Suggestion enabled
es: Sugerencia activada

en: Suggestion mode
es: Modo de sugerencias

en: Switch suggestion mode
es: Cambiar modo de sugerencias

en: Multiple character match
es: Coincidencia de varios caracteres

en: Switch to matching multiple characters at once
es: Pasa a la búsqueda de coincidencias de varios caracteres a la vez

en: Single character match
es: Coincidencia de un solo carácter

en: Switch to matching only single characters
es: Pasa a la búsqueda de coincidencias para caracteres individuales

en: Onechar mode
es: Modo de carácter

en: Switch onechar mode
es: Cambia el modo de coincidencia de carácter

en: Switch to normal commit mode (automatic commits go into the preedit instead of into the application. This enables automatic definitions of new shortcuts)
es: Cambia al modo normal (los asentamientos automáticos van a preedición en vez de a la aplicación, de forma que se permita la definición automática de nuevos atajos)

en: Switch to direct commit mode (automatic commits go directly into the application)
es: Cambia al modo directo (los asentamientos automáticos van directamente a la aplicación)

en: Auto commit mode
es: Modo automático de asentamiento

en: Switch autocommit mode
es: Cambia el modo de asentamiento automático

en: Setup
es: Ajustes

en: Configure ibus-table “%(engine-name)s”
es: Configura ibus-table “%(engine-name)s”

note: Translators: This is used in the title bar of a dialog window requesting that the user types a key to be used as a new key binding for a command.
en: Key input
es: Entrada de tecla

en: Cancel
es: Cancelar

note: Translators: This is from the dialog to enter a key or a key combination to be used as a key binding for a command.
en: Please press a key (or a key combination)
es: Por favor, presione una tecla (o una combinación de teclas)

note: Translators: This is from the dialog to enter a key or a key combination to be used as a key binding for a command.
en: The dialog will be closed when the key is released
es: El diálogo se cerrará cuando la tecla sea liberada

en: Table input method for IBus.
es: Método de entrada basado en tabla para IBus.

en: Online documentation:
es: _Documentación en línea:

en: Ibus Table
es: Tabla de IBus

en: Table based input method
es: Método de entrada basado en tabla

en: Ibus-table is an input method framework for table-based input methods. Mostly it is used for Chinese input methods such as ZhengMa, WuBi, ErBi, CangJie, …. But some tables for other languages are available as well.
es: Ibus-table es un marco común para métodos de entrada basados en tablas. Se usa sobre todo para métodos de entrada de chino, como ZhengMa, WuBi, ErBi o CangJie, aunque también hay tablas para otros idiomas.

en: Initial state
es: Estado inicial

en: Direct input
es: Entrada directa

en: Table input
es: Entrada de tabla

en: Preferences
es: Preferencias

en: About
es: Acerca de

en: Restore all defaults
es: Restablecer valores predeterminados

en: _Close
es: Ce_rrar

note: Translators: This is the label of a tab in the setup tool. Here the user can set up some options which influence the behaviour of ibus-table.
en: Settings
es: Ajustes

note: Translators: This is the label of a tab in the setup tool. Here the user can set up some more advanced options.
en: Details
es: Detalles

note: Translators: This is the label of a tab in the setup tool. Here the user can customize the key bindings to execute certain commands of ibus-table. For example which key to use to commit, which key to use to move to the next candidate etc... Translators: Column heading of the table listing the existi
en: Key bindings
es: Atajos de teclado

note: Translators: A combobox to choose whether the input mode (“Direct input” or “Table input”) should be remembered or whether ibus-table should always use “Table input” by default after a restart.
en: Remember input mode
es: Recordar modo de entrada

note: Translators: A tooltip for the label of the combobox to choose whether the input mode (“Direct input” or “Table input”) should be remembered or whether ibus-table should always use “Table input” by default after a restart.
en: Whether the last used input mode should be remembered or whether ibus-table should start in “Table mode” by default after a restart. There are two input modes: “Table input” means the input method is on. “Direct input” is almost the same as if the input method were off, i.e. not used at all, most characters just get passed to the application. But some conversion between fullwidth and halfwidth may still happen in direct input mode.
es: Si se debe recordar el último modo de entrada usado o si ibus-table debe comenzar en “Modo de tabla” de forma predeterminada después de un reinicio. Hay dos métodos de entrada: “Entrada de tabla” significa que el método de entrada está activado. “Entrada directa” es casi lo mismo que si el método de entrada estuviera desactivado, es decir, no se usa en absoluto, la mayoría de los caracteres simplemente pasan a la aplicación. Pero aún puede ocurrir alguna conversión entre ancho completo y medio ancho en el modo de entrada directa.

en: Yes
es: Sí

note: Translators: A combobox to choose the variant of Chinese which should be preferred.
en: Chinese mode:
es: Modo de chino:

note: Translators: A tooltip for the label of the combobox to choose which variant of Chinese should be preferred.
en: “Simplified Chinese” shows only characters 
    used in simplified Chinese. “Traditional Chinese”
    shows only characters used in traditional Chinese.
    “Simplified Chinese before traditional” shows all
    characters but puts the simplified characters higher
    up in the candidate list. “Traditional Chinese before
    simplified” puts the traditional characters higher up
    in the candidate list. “All characters” just shows all
    matches without any particular filtering on traditional
    versus simplified Chinese.
es: «Chino simplificado» muestra solo caracteres usados
    en el chino simplificado. «Chino tradicional» muestra
    solo caracteres usados en el chino tradicional.
    «Chino simplificado antes que el tradicional» muestra
    todos los caracteres pero da preferencia a los del
    simplificado en la lista de candidatos. «Chino
    tradicional antes que el simplificado» da preferencia
    a los del tradicional. «Todos los caracteres chinos»
    muestra todas las coincidencias sin filtrar por el
    tipo de carácter del que se trate.

note: Translators: This is the setting to use both simplified and traditional Chinese but prefer simplified Chinese
en: Simplified Chinese before traditional
es: Chino simplificado antes que el tradicional

note: Translators: This is the setting to use both simplified and traditional Chinese but prefer traditional Chinese
en: Traditional Chinese before simplified
es: Chino tradicional antes que el simplificado

note: Translators: A combobox to choose the letter width while in “Table input” mode.
en: Table input letter width:
es: Anchura de letra con entrada de tabla:

note: Translators: A tooltip for the label of the combobox to choose the letter width while in “Table input” mode.
en: Whether to use fullwidth or halfwidth
    letters in table input mode.
es: Si se deben usar letras de anchura media o
    completa en el modo de entrada de tabla.

note: Translators: A combobox to choose the punctuation width while in “Table input” mode.
en: Table input punctuation width:
es: Anchura de puntuación con entrada de tabla:

note: Translators: A tooltip for the label of the combobox to choose the punctuation width while in “Table input” mode.
en: Whether to use fullwidth or halfwidth
    punctuation in table input mode.
es: Si se debe usar puntuación de anchura media
    o completa en el modo de entrada de tabla.

note: Translators: A combobox to choose the letter width while in “Direct input” mode.
en: Direct input letter width:
es: Anchura de letra con entrada directa:

note: Translators: A tooltip for the label of the combobox to choose the letter width while in “Direct input” mode.
en: Whether to use fullwidth or halfwidth
    letters in direct input mode.
es: Si se deben usar letras de anchura media o
    completa en el modo de entrada directa.

note: Translators: A combobox to choose the punctuation width while in “Direct input” mode.
en: Direct input punctuation width:
es: Anchura de puntuación con entrada directa:

note: Translators: A tooltip for the label of the combobox to choose the punctuation width while in “Direct input” mode.
en: Whether to use fullwidth or halfwidth
    punctuation in direct input mode.
es: Si se debe usar puntuación de anchura media
    o completa en el modo de entrada directa.

en: Candidate list
es: Lista de candidatos

note: Translators: A combobox to choose whether a candidate list should be shown or hidden. For Chinese input methods one usually wants the candidate list to be shown. But for some non-Chinese input methods like the Russian “translit”, hiding the candidate lists is better.
en: Show candidate list
es: Mostrar la lista de candidatos

note: Translit: A tooltip for the label of the combobox to choose whether a candidate list should be shown or hidden.
en: Whether candidate lists should be shown or hidden.
    For Chinese input methods one usually wants the
    candidate lists to be shown. But for some non-Chinese
    input methods like the Russian “translit”, hiding the
    candidate lists is better.
es: Si debe mostrarse o no la lista de candidatos.
    Para métodos de entrada de chino lo normal
    es que quiera visualizarse la lista, pero
    para otros como el “translit” ruso, suele ser
    mejor ocultarla.

note: Translators: A combobox to choose whether the candidate window should be drawn horizontally or vertically.
en: Orientation:
es: Orientación:

note: Translators: A tooltip for the label of the combobox to choose whether the candidate window should be drawn horizontally or vertically.
en: Whether the lookup table showing the candidates
    should be vertical or horizontal.
es: Si la tabla de consulta con los candidatos
    debe ser vertical u horizontal.

en: System default
es: Predeterminado del sistema

note: Translators: Here one can choose how many suggestion candidates to show in one page of the candidate list.
en: Page size:
es: Tamaño de página:

note: Translators: A tooltip for the label of the adjustment for the number of candidates to show in one page of the candidate list.
en: The maximum number of candidates in
    one page of the lookup table. You can switch
    pages in the lookup table using the page up/down
    keys or the arrow up/down keys.
es: El número máximo de candidatos por página.
    Puede moverse entre página con las teclas
    de página siguiente/anterior o con las de
    flecha abajo/arriba.

en: Current key bindings:
es: Atajos de teclado actuales:

note: Translators: Column heading of the table listing the existing key bindings
en: Command
es: Orden

en: Edit
es: Editar

note: Translators: A tooltip for the button to edit the keybindings for the selected command.
en: Edit the key bindings for the selected command
es: Editar los atajos de teclado de la orden seleccionada

en: Set to default
es: Establecer valor predeterminado

note: Translators: A tooltip for the button to set the default key bindings for the selected command. Translators: This is a tooltip for the button to set the key bindings for the selected command to the default.
en: Set default key bindings for the selected command
es: Establecer los atajos de teclado predeterminados de la orden seleccionada

en: Set all to default
es: Establecer todo a valores predeterminados

note: Translators: A tooltip for the button to set the key bindings to default for all commands.
en: Set default key bindings for all commands
es: Establecer los atajos de teclado predeterminados de todas las órdenes

note: Translators: A checkbox where one can choose whether the order of the candidates is dynamically adjusted according to how often the candidates are used.
en: Dynamic adjust
es: Ajuste dinámico

en: Here you can choose whether the order of the candidates is dynamically adjusted according to how often the candidates are used.
es: Aquí puede usted elegir si el orden de los candidatos se ajusta dinámicamente de acuerdo a la frecuencia con la que se utilizan los candidatos.

en: Delete all learned data
es: Eliminar datos aprendidos

note: Translators: A combobox to choose whether only single character candidates should be shown.
en: Compose:
es: Generación de candidatos:

note: Translators: A tooltip for label of the combobox to choose whether only single character candidates should be shown.
en: If this is set to “single char”, only single
    character candidates will be shown. If it is
    set to “Phrase” candidates consisting of
    several characters may be shown.
es: Con “carácter” sólo se muestran candidatos
    de caracteres individuales.
    Con “frase” pueden aparecer candidatos de
    varios caracteres.

en: Phrase
es: Frase

en: Single Char
es: Carácter único

note: Translators: A combobox to choose whether the first candidate will be automatically selected during typing.
en: Auto select
es: Selección automática

note: Translators: A tooltip for the label of the combobox to choose whether the first candidate will be automatically select during typing.
en: If set to “Yes”, this does the following 4 things:
    1) When typing “Return”, commit the 
       candidate + line-feed
    2) When typing Tab, commit the candidate
    3) When committing using a commit key, commit
       the candidate + " "
    4) If typing the next character matches no candidates,
       commit the first candidate of the previous match.
       (Mostly needed for non-Chinese input methods like
       the Russian “translit”)
es: S se establece a “Yes”, hace una de las 4 cosas siguientes:
    1) Al escribir “Return”, confirma el 
       candidato + alimentación de línea
    2) Cuando teclea Tab, confirma el candidato
    3) Al confirma usando una clave de confirmación, confirma
       el candidato + " "
    4) Si al teclear el siguiente carácter no hay coincidencia de candidatos,
       confirma el primer candidato de la anterior coincidencia.
       (Necesario mayormente para métodos de entrada no Chinos como
       el Ruso “translit”)

note: Translators: A combobox to choose whether automatic commits go into the preëdit or into the application
en: Auto commit mode:
es: Modo de asentamiento automático:

note: Translators; A tooltip for the label of the combobox to choose whether automatic commits go into the preëdit or into the application.
en: Committing with the commit keys or with the mouse
    always commits to the application. This option is about
    “automatic” commits which may happen when
    one just continues typing input without committing
    manually. From time to time, “automatic” commits will
    happen then.
    “Direct” means such “automatic” commits go directly
    into the application, “Normal” means they get committed
    to preedit.
es: Al confirmar con las teclas de confirmación con el ratón
    siempre confirma a la aplicación. Esta opción es para
    las confirmaciones “automáticas” que pueden producirse cuando
    uno sigue tecleando en la entrada sin confirmar.
    manualmente. De vez en cuando, se producirán confirmaciones
    "automáticas" entonces.
    “Directa” significa que esas confirmaciones "automáticas" vayan directamente
    a la aplicación, “Normal” significa que se confirman
    para preeditar.

note: Translators: A combobox to choose whether a wildcard should be automatically appended to the input.
en: Auto wildcard
es: Comodín automático

note: Translators: A tooltip for the label of the combobox to choose whether a wildcard should be automatically appended to the input.
en: If yes, a multi wildcard will be automatically
    appended to the end of the input string.
es: Cuando está activo se añade automáticamente el comodín
    de coincidencia múltiple al final de la cadena de entrada.

note: Translators: This single character is a placeholder to match a any single character
en: Single wildcard character:
es: Comodín de carácter único:

note: Translators: This is a tooltip for the label of the entry where one can choose the wildcard to match a single character.
en: The wildcard to match any single character.
    Type RETURN or ENTER to confirm after changing the wildcard.
es: El comodín para coincidencias de un solo carácter.
    Pulse INTRO para confirmar el cambio de comodín.

note: Translators: This single character is a placeholder to match a any number of characters
en: Multi wildcard character:
es: Comodín de cadena:

note: Translators: This is a tooltip for the label of the entry where one can choose the wildcard to match any number of candidates.
en: The wildcard used to match any number of characters.
    Type RETURN or ENTER to confirm after changing the wildcard.
es: El comodín para coincidencias de cualquier número de caracteres.
    Pulse INTRO para confirmar el cambio de comodín.

note: Translators: A combobox to choose whether the color scheme for a dark theme should be used.
en: Use dark theme
es: Usar tema oscuro

note: Translators: A tooltip for the label of the combobox to choose whether the color scheme for a dark theme should be used.
en: If yes, the color scheme for a dark theme will be used.
es: Sí si, el esquema de color para un tema oscuro será usado.

note: Translators: A checkbox where one can choose whether a sound is played on error
en: Play sound file on error
es: Reproducir sonido al producirse errores

en: Here you can choose whether a sound file is played if an error occurs. If the simpleaudio module for Python3 is not installed, this option does nothing.
es: Aquí puede usted elegir si se reproduce un archivo de sonido cuando sucede un error. Si no está instalado el módulo simpleaudio para Python3, esta opción no hace nada.

note: Translators: When the debug level is greater than 0, debug information may be printed to the log file and debug information may also be shown graphically.
en: Debug level:
es: Nivel de depuración:

note: Translators: This is a tooltip for the label for the adjustment of the debug level.
en: When greater than 0, debug information may be printed to the log file and debug information may also be shown graphically.
es: Cuando es superior a 0, es posible guardar la información de depuración en el archivo de registro e incluso mostrarla gráficamente.

en: Are you sure?
es: ¿Lo confirma?

en: _Cancel
es: _Cancelar

en: _OK
es: _Aceptar

en: Another instance of this app is already running.
es: Ya está ejecutándose otro ejemplar de la aplicación.

note: Translators: This is the text in the centre of a small dialog window, trying to confirm whether the user is really sure to restore all default settings.
en: Do you really want to restore all default settings?
es: ¿Realmente quiere recuperar los ajustes predeterminados?

note: Translators: This is the text in the centre of a small dialog window, trying to confirm whether the user is really sure to to delete all the data ibus-table has learned from typing and selecting candidates. Deleting this learned data cannot be reversed. So the user should be really sure he really wa
en: Do you really want to delete all data learned from typing and selecting candidates?
es: ¿Realmente quiere borrar los datos aprendidos de lo tecleado y seleccionar candidatos?

en: Select .wav sound file:
es: Seleccione un archivo de sonido .wav:

en: Edit key bindings for command “%s”
es: Editar los atajos de teclado de la orden «%s»

note: Translators: This is a tooltip for the button to add a key binding.
en: Add a key binding
es: Añadir un atajo de teclado

note: Translators: This is a tooltip for the button to remove the selected key binding.
en: Remove selected key binding
es: Quitar el atajo de teclado seleccionado

note: Translators: This is a tooltip for the button to move the selected key binding up (higher in priority).
en: Move key binding up
es: Mover la vinculación de teclas hacia arriba

note: Translators: This is a tooltip for the button to move the selected key binding down (lower in priority).
en: Move key binding down
es: Mover la vinculación de teclas hacia abajo

note: Translators: This is the text in the centre of a small dialog window, trying to confirm whether the user is really sure to reset the key bindings for *all* commands to their defaults. This cannot be reversed so the user should be really sure he wants to do that.
en: Do you really want to set the key bindings for all commands to their defaults?
es: ¿Confirma que quiere restablecer los valores predeterminados de los atajos de todas las órdenes?

en: ibus is not running.
es: ibus no está ejecutándose.
