inkscape - en to en_AU translation catalogue (725 entries)

en: Rainbow-colored semitransparent oily splotches
en_AU: Rainbow-coloured semitransparent oily splotches

en: Leopard spots (loses object's own color)
en_AU: Leopard spots (loses object's own colour)

en: Irregular vertical dark stripes (loses object's own color)
en_AU: Irregular vertical dark stripes (loses object's own colour)

en: Detect color edges and retrace them in grayscale
en_AU: Detect colour edges and retrace them in grayscale

en: Detect color edges and retrace them in blue
en_AU: Detect colour edges and retrace them in blue

en: Soft, pastel-colored, blurry bevel
en_AU: Soft, pastel-coloured, blurry bevel

en: Waxy texture which keeps its iridescence through color fill change
en_AU: Waxy texture which keeps its iridescence through colour fill change

en: Bark texture, vertical; use with deep colors
en_AU: Bark texture, vertical; use with deep colours

en: Stylized reptile skin texture
en_AU: Stylised reptile skin texture

en: Stone wall texture to use with not too saturated colors
en_AU: Stone wall texture to use with not too saturated colours

en: Metallized Paint
en_AU: Metallised Paint

en: Metallized effect with a soft lighting, slightly translucent at the edges
en_AU: Metallised effect with a soft lighting, slightly translucent at the edges

en: Metallized Ridge
en_AU: Metallised Ridge

en: Gel Ridge metallized at its top
en_AU: Gel Ridge metallised at its top

en: Enamel Jewelry
en_AU: Crumpled matte plastic, with melted edge

en: Inner colorized shadow, outer black shadow
en_AU: Inner colourised shadow, outer black shadow

en: Blurred colorized contour, filled inside
en_AU: Blurred colourised contour, filled inside

en: Blurred colorized contour, empty inside
en_AU: Blurred colourised contour, empty inside

en: Bevel, crude light, discoloration and glow like in electronic microscopy
en_AU: Bevel, crude light, discolouration and glow like in electronic microscopy

en: Colorizable filling with flow inside like transparency
en_AU: Colourisable filling with flow inside like transparency

en: Colorized blotches, like a crowd of people
en_AU: Colourised blotches, like a crowd of people

en: Scotland
en_AU: SlackScotland

en: Colorized mountain tops out of the fog
en_AU: Colourised mountain tops out of the fog

en: In and out glow with a possible offset and colorizable flood
en_AU: In and out glow with a possible offset and colourisable flood

en: Watercolor
en_AU: Watercolour

en: Cloudy watercolor effect
en_AU: Cloudy watercolour effect

en: Felt like texture with color turbulence and slightly darker at the edges
en_AU: Felt like texture with colour turbulence and slightly darker at the edges

en: Ink paint on paper with some turbulent color shift
en_AU: Ink paint on paper with some turbulent colour shift

en: Smooth rainbow colors melted along the edges and colorizable
en_AU: Smooth rainbow colours melted along the edges and colourisable

en: Smooth rainbow colors slightly melted along the edges
en_AU: Smooth rainbow colours slightly melted along the edges

en: Bright, polished uneven metal casting, colorizable
en_AU: Bright, polished uneven metal casting, colourisable

en: Color
en_AU: Colour

en: Plaster Color
en_AU: Plaster Colour

en: Colored plaster emboss effect
en_AU: Coloured plaster emboss effect

en: Creates colorizable blotches which smoothly flow over the edges of the lines at their crossings
en_AU: Creates colourisable blotches which smoothly flow over the edges of the lines at their crossings

en: Smooth rainbow colors warped along the edges and colorizable
en_AU: Smooth rainbow colours warped along the edges and colourisable

en: Slightly posterize and draw edges like on old printed postcards
en_AU: Slightly posterise and draw edges like on old printed postcards

en: Paint objects with a transparent turbulence which turns around color edges
en_AU: Paint objects with a transparent turbulence which turns around colour edges

en: Combine a HSL edges detection bump with a leathery or woody and colorizable texture
en_AU: Combine a HSL edges detection bump with a leathery or woody and colourisable texture

en: Partly opaque water color effect with bleed
en_AU: Partly opaque water colour effect with bleed

en: Alpha Engraving B
en_AU: Thick acrylic paint texture with high texture depth

en: Convert to a colorizable transparent positive or negative
en_AU: Convert to a colourisable transparent positive or negative

en: Creates an approximative semi-transparent and colorizable image of the saturation levels
en_AU: Creates an approximative semi-transparent and colourisable image of the saturation levels

en: Bright metallic effect for any color
en_AU: Bright metallic effect for any colour

en: Deep Colors Plastic
en_AU: Deep Colours Plastic

en: Transparent plastic with deep colors
en_AU: Transparent plastic with deep colours

en: Soft Colors
en_AU: Soft Colours

en: Adds a colorizable edges glow inside objects and pictures
en_AU: Adds a colourisable edges glow inside objects and pictures

en: Bumps effect with a bevel, color flood and complex lighting
en_AU: Bumps effect with a bevel, colour flood and complex lighting

en: Oversaturate colors which can be fluorescent in real world
en_AU: Oversaturate colours which can be fluorescent in real world

en: Pixellize
en_AU: Pixellise

en: Paint objects with a transparent turbulence which wraps around color edges
en_AU: Paint objects with a transparent turbulence which wraps around colour edges

en: Adds a colorizable opaque background
en_AU: Adds a colourisable opaque background

en: Enhance and redraw color edges in 1 bit black and white
en_AU: Enhance and redraw colour edges in 1 bit black and white

en: Poster Color Fun
en_AU: Poster Colour Fun

en: Basic noise fill texture; adjust color in Flood
en_AU: Basic noise fill texture; adjust colour in Flood

en: Colorize Turbulent
en_AU: Colourise Turbulent

en: Colorizable filling with liquid transparency
en_AU: Colourisable filling with liquid transparency

en: Cut out, add inner shadow and colorize some parts of an image
en_AU: Cut out, add inner shadow and colourise some parts of an image

en: Create a two colors lithographic effect
en_AU: Create a two colours lithographic effect

en: Colorize separately the three color channels
en_AU: Colourise separately the three colour channels

en: Posterized Light Eraser
en_AU: Posterised Light Eraser

en: Create a semi transparent posterized image
en_AU: Create a semi transparent posterised image

en: Like Duochrome but with three colors
en_AU: Like Duochrome but with three colours

en: Render Cyan, Magenta and Yellow channels with a colorizable background
en_AU: Render Cyan, Magenta and Yellow channels with a colourisable background

en: Posterized Blur
en_AU: Posterised Blur

en: Converts blurred contour to posterized steps
en_AU: Converts blurred contour to posterised steps

en: Stylized triangle arrow
en_AU: Stylised triangle arrow

en: Colored triangle
en_AU: Coloured triangle

en: Colored dot
en_AU: Coloured dot

en: Colored square
en_AU: Coloured square

en: Colored diamond
en_AU: Coloured diamond

[ctx: Palette]
en: 90% Gray
en_AU: 90% Grey

[ctx: Palette]
en: 80% Gray
en_AU: 80% Grey

[ctx: Palette]
en: 70% Gray
en_AU: 70% Grey

[ctx: Palette]
en: 60% Gray
en_AU: 60% Grey

[ctx: Palette]
en: 50% Gray
en_AU: 50% Grey

[ctx: Palette]
en: 40% Gray
en_AU: 40% Grey

[ctx: Palette]
en: 30% Gray
en_AU: 30% Grey

[ctx: Palette]
en: 20% Gray
en_AU: 20% Grey

[ctx: Palette]
en: 10% Gray
en_AU: 10% Grey

[ctx: Palette]
en: 7.5% Gray
en_AU: 7.5% Grey

[ctx: Palette]
en: 5% Gray
en_AU: 5% Grey

[ctx: Palette]
en: 2.5% Gray
en_AU: 2.5% Grey

[ctx: Palette]
en: dimgray (#696969)
en_AU: dimgrey (#696969)

[ctx: Palette]
en: gray (#808080)
en_AU: grey (#808080)

[ctx: Palette]
en: darkgray (#A9A9A9)
en_AU: darkgrey (#A9A9A9)

[ctx: Palette]
en: lightgray (#D3D3D3)
en_AU: lightgrey (#D3D3D3)

[ctx: Palette]
en: darkslategray (#2F4F4F)
en_AU: darkslategrey (#2F4F4F)

[ctx: Palette]
en: slategray (#708090)
en_AU: slategrey (#708090)

[ctx: Palette]
en: lightslategray (#778899)
en_AU: lightslategrey (#778899)

[ctx: Symbol]
en: Elevator
en_AU: Lift

[ctx: Symbol]
en: Jewelry
en_AU: Jewellery

[ctx: Symbol]
en: Leisure center
en_AU: Leisure centre

[ctx: Symbol]
en: Theater
en_AU: Theatre

[ctx: Symbol]
en: Subway
en_AU: Metro/Subway

en: Color Mode
en_AU: Colour Mode

en: Toggle between normal and grayscale modes
en_AU: Toggle between normal and greyscale modes

en: Color Managed Mode
en_AU: Colour Managed Mode

en: Toggle between normal and color managed modes
en_AU: Toggle between normal and colour managed modes

en: Snap Rotation Center
en_AU: Snap Rotation Centre

en: Zoom Center Page
en_AU: Zoom Centre Page

en: Center page in window
en_AU: Centre page in window

en: Edit objects' colors, gradients, arrowheads, and other fill and stroke properties...
en_AU: Edit objects' colours, gradients, arrowheads, and other fill and stroke properties...

en: Select colors from a swatches palette
en_AU: Select colours from a swatches palette

en: Prototype Dialog
en_AU: Prototype Dialogue

en: Toggle all dialogs
en_AU: Toggle all dialogues

en: Show or hide all dialogs
en_AU: Show or hide all dialogues

en: Apply the style of the copied object to selection
en_AU: Apply style of the copied object to selection

en: Open File Dialog
en_AU: Open File Dialogue

note: TRANSLATORS: 'en' is an ISO 639-1 language code. Replace with language code for your language, i.e. the name of your .po file
en: en
en_AU: en_AU

en: Align to horizontal center
en_AU: Align to horizontal centre

en: Align selection horizontally to the center
en_AU: Align selection horizontally to the centre

en: Align to vertical center
en_AU: Align to vertical centre

en: Align selection vertically to the center
en_AU: Align selection vertically to the centre

en: Align to center
en_AU: Align to centre

en: Align selection to the center
en_AU: Align selection to the centre

en: Even horizontal centers
en_AU: Even horizontal centres

en: Distribute horizontally with even spacing between centers
en_AU: Distribute horizontally with even spacing between centres

en: Even vertical centers
en_AU: Even vertical centres

en: Distribute vertically with even spacing between centers
en_AU: Distribute vertically with even spacing between centres

en: Exchange around center
en_AU: Exchange around centre

en: Exchange positions of selected objects - rotate around center point
en_AU: Exchange positions of selected objects - rotate around centre point

en: Randomize centers in both dimensions
en_AU: Randomise centres in both dimensions

en: Unclump objects: try to equalize edge-to-edge distances
en_AU: Unclump objects: try to equalise edge-to-edge distances

en: Export without filters to avoid rasterization for PDF, PS, EPS
en_AU: Export without filters to avoid rasterisation for PDF, PS, EPS

en: Include background color in exported file
en_AU: Include background colour in exported file

en: Export PNG Color Mode
en_AU: Export PNG Colour Mode

en: Set color mode for PNG export
en_AU: Set colour mode for PNG export

en: Enter string for background color, e.g. #ff007f or rgb(255, 0, 128)
en_AU: Enter string for background colour, e.g. #ff007f or rgb(255, 0, 128)

en: Enter string for PNG Color Mode, one of Gray_1/Gray_2/Gray_4/Gray_8/Gray_16/RGB_8/RGB_16/GrayAlpha_8/GrayAlpha_16/RGBA_8/RGBA_16
en_AU: Enter string for PNG Colour Mode, one of Gray_1/Gray_2/Gray_4/Gray_8/Gray_16/RGB_8/RGB_16/GrayAlpha_8/GrayAlpha_16/RGBA_8/RGBA_16

en: Create a new page and center view on it
en_AU: Create a new page and centre view on it

en: Delete the selected page and center view on next page
en_AU: Delete the selected page and centre view on next page

en: Fill Color
en_AU: Fill Colour

en: Stroke Color
en_AU: Stroke Colour

en: Normalize Path Data
en_AU: Normalise Path Data

en: <b>Click</b> to set fill, <b>Shift+click</b> to set stroke; <b>drag</b> to average color in area; with <b>Alt</b> to pick inverse color; <b>Ctrl+C</b> to copy the color under mouse to clipboard
en_AU: <b>Click</b> to set fill, <b>Shift+click</b> to set stroke; <b>drag</b> to average colour in area; with <b>Alt</b> to pick inverse colour; <b>Ctrl+C</b> to copy the colour under mouse to clipboard

en: Pick colors from image
en_AU: Pick colours from image

en: Using Trace Pixel Art dialog
en_AU: Using Trace Pixel Art dialogue

en: Show or hide the color palette
en_AU: Show or hide the colour palette

en: Unrecognized shape '%1'
en_AU: Unrecognised shape '%1'

en: Unrecognized color '%1'
en_AU: Unrecognised colour '%1'

en: Unrecognized selector '%1'
en_AU: Unrecognised selector '%1'

en: Unrecognized property '%1'
en_AU: Unrecognised property '%1'

en: Object rotation center
en_AU: Object rotation centre

en: Page center
en_AU: Page centre

en: page center
en_AU: page centre

en: page margin center
en_AU: page margin centre

en: object rotation center
en_AU: object rotation centre

en: Apply charcoal stylization to selected bitmap(s)
en_AU: Apply charcoal stylisation to selected bitmap(s)

en: Colorize
en_AU: Colourise

en: Colorize selected bitmap(s) with specified color, using given opacity
en_AU: Colourise selected bitmap(s) with specified colour, using given opacity

en: Cycle Colormap
en_AU: Cycle Colourmap

en: Cycle colormap(s) of selected bitmap(s)
en_AU: Cycle colourmap(s) of selected bitmap(s)

en: Enhance selected bitmap(s); minimize noise
en_AU: Enhance selected bitmap(s); minimise noise

en: Equalize
en_AU: Equalise

en: Equalize selected bitmap(s); histogram equalization
en_AU: Equalize selected bitmap(s); histogram equalisation

en: Level selected bitmap(s) by scaling values falling between the given ranges to the full color range
en_AU: Level selected bitmap(s) by scaling values falling between the given ranges to the full colour range

en: Level the specified channel of selected bitmap(s) by scaling values falling between the given ranges to the full color range
en_AU: Level the specified channel of selected bitmap(s) by scaling values falling between the given ranges to the full colour range

en: Replace each pixel component with the median color in a circular neighborhood
en_AU: Replace each pixel component with the median colour in a circular neighbourhood

en: Normalize
en_AU: Normalise

en: Normalize selected bitmap(s), expanding color range to the full possible range of color
en_AU: Normalise selected bitmap(s), expanding colour range to the full possible range of colour

en: Stylize selected bitmap(s) so that they appear to be painted with oils
en_AU: Stylise selected bitmap(s) so that they appear to be painted with oils

en: Colored Shading
en_AU: Coloured Shading

en: Solarize
en_AU: Solarise

en: Solarize selected bitmap(s), like overexposing photographic film
en_AU: Solarise selected bitmap(s), like overexposing photographic film

en: Swirl selected bitmap(s) around center point
en_AU: Swirl selected bitmap(s) around centre point

en: Rasterize filter effects
en_AU: Rasterise filter effects

en: Resolution for rasterization (dpi):
en_AU: Resolution for rasterisation (dpi):

en: Convert gradients to colored polygon series
en_AU: Convert gradients to coloured polygon series

en: Lighting color
en_AU: Lighting colour

en: Background color
en_AU: Background colour

en: Image color
en_AU: Image colour

en: Color bump
en_AU: Colour bump

en: Bump color
en_AU: Bump colour

en: Replace RGB by any color
en_AU: Replace RGB by any colour

en: Color Blindness
en_AU: Colour Blindness

en: Simulate color blindness
en_AU: Simulate colour blindness

en: Color Shift
en_AU: Colour Shift

en: Blend image or object with a flood color
en_AU: Blend image or object with a flood colour

en: Color and alpha
en_AU: Colour and alpha

en: Color only
en_AU: Colour only

en: Color 1
en_AU: Colour 1

en: Color 2
en_AU: Colour 2

en: Extract color channel as a transparent image
en_AU: Extract colour channel as a transparent image

en: Customize greyscale components
en_AU: Customise greyscale components

en: Colors
en_AU: Colours

en: Replace hue by two colors
en_AU: Replace hue by two colours

en: Color Dodge
en_AU: Colour Dodge

en: Color Burn
en_AU: Colour Burn

en: Moonarize
en_AU: Moonarise

en: Classic photographic solarization effect
en_AU: Classic photographic solarisation effect

en: Colored nights
en_AU: Coloured nights

en: Invert colors
en_AU: Invert colours

en: Detect color edges in object
en_AU: Detect colour edges in object

en: Adds a colorizable outline
en_AU: Adds a colourisable outline

en: Noise color
en_AU: Noise colour

en: Chromo effect with customizable edge drawing and graininess
en_AU: Chromo effect with customisable edge drawing and graininess

en: Fill color
en_AU: Fill colour

en: Stroke color
en_AU: Stroke colour

en: Electrize
en_AU: Electrise

en: Electro solarization effects
en_AU: Electro solarisation effects

en: Posterize and draw smooth lines around color shapes
en_AU: Posterise and draw smooth lines around colour shapes

en: Points color
en_AU: Points colour

en: Posterize Basic
en_AU: Posterise Basic

en: Simple posterizing effect
en_AU: Simple posterising effect

en: Blur color
en_AU: Blur colour

en: Use object's color
en_AU: Use object's colour

en: Colorizable Drop shadow
en_AU: Colourisable Drop shadow

en: Smooth (optimizeQuality)
en_AU: Smooth (optimiseQuality)

en: Blocky (optimizeSpeed)
en_AU: Blocky (optimiseSpeed)

en: Hide the dialog next time and always apply the same actions.
en_AU: Hide the dialogue next time and always apply the same actions.

en: GrayAlpha 8
en_AU: GreyAlpha 8

en: GrayAlpha 16
en_AU: GreyAlpha 16

en: Gray 1
en_AU: Grey 1

en: Gray 2
en_AU: Grey 2

en: Gray 4
en_AU: Grey 4

en: Gray 8
en_AU: Grey 8

en: Gray 16
en_AU: Grey 16

en: Color Matrix
en_AU: Colour Matrix

en: Change gradient stop color
en_AU: Change gradient stop colour

en: Invert gradient colors
en_AU: Invert gradient colours

en: Radial gradient <b>center</b>
en_AU: Radial gradient <b>centre</b>

en: %s for: %s%s; drag with <b>Ctrl</b> to snap angle, with <b>Ctrl+Alt</b> to preserve angle, with <b>Ctrl+Shift</b> to scale around center
en_AU: %s for: %s%s; drag with <b>Ctrl</b> to snap angle, with <b>Ctrl+Alt</b> to preserve angle, with <b>Ctrl+Shift</b> to scale around centre

en: Radial gradient <b>center</b> and <b>focus</b>; drag with <b>Shift</b> to separate focus
en_AU: Radial gradient <b>centre</b> and <b>focus</b>; drag with <b>Shift</b> to separate focus

en: Render objects without filters instead of rasterizing (PS/EPS/PDF)
en_AU: Render objects without filters instead of rasterising (PS/EPS/PDF)

en: Background color for exported bitmaps (any SVG color string)
en_AU: Background colour for exported bitmaps (any SVG colour string)

en: COLOR
en_AU: COLOUR

en: Color mode (bit depth and color type) for exported bitmaps (Gray_1/Gray_2/Gray_4/Gray_8/Gray_16/RGB_8/RGB_16/GrayAlpha_8/GrayAlpha_16/RGBA_8/RGBA_16)
en_AU: Colour mode (bit depth and colour type) for exported bitmaps (Grey_1/Grey_2/Grey_4/Grey_8/Grey_16/RGB_8/RGB_16/GreyAlpha_8/GreyAlpha_16/RGBA_8/RGBA_16)

en: COLOR-MODE
en_AU: COLOUR-MODE

en: Mirror an object along a movable axis, or around the page center. The mirrored copy can be styled independently.
en_AU: Mirror an object along a movable axis, or around the page centre. The mirrored copy can be styled independently.

en: Create multiple copies of an object following a grid layout. Customize size, rotation, distances, style and tiling symmetry.
en_AU: Create multiple copies of an object following a grid layout. Customise size, rotation, distances, style and tiling symmetry.

en: Draw a circle by center and radius, where the first node of the path is the center, and the last determines its radius
en_AU: Draw a circle by centre and radius, where the first node of the path is the centre, and the last determines its radius

en: Equalize dashes
en_AU: Equalise dashes

en: Color and opacity
en_AU: Colour and opacity

en: Set color and opacity of the dimensions
en_AU: Set colour and opacity of the dimensions

en: Localize number format
en_AU: Localise number format

en: Use localized number formatting, e.g. '1,0' instead of '1.0' with German locale
en_AU: Use localised number formatting, e.g. '1,0' instead of '1.0' with German locale

en: Add object center
en_AU: Add object centre

en: Add the projected object center
en_AU: Add the projected object centre

en: Center point of mirror line
en_AU: Centre point of mirror line

en: Adjust center point of mirror line
en_AU: Adjust centre point of mirror line

en: Vertical center
en_AU: Vertical centre

en: Horizontal center
en_AU: Horizontal centre

en: Center Vertical
en_AU: Centre Vertical

en: Center Horizontal
en_AU: Centre Horizontal

en: Background color and opacity
en_AU: Background colour and opacity

en: Set color and opacity of the background
en_AU: Set colour and opacity of the background

en: Global randomize
en_AU: Global randomise

en: Show center of node
en_AU: Show centre of node

en: Size of the handles in the effect visualization (not editable)
en_AU: Size of the handles in the effect visualisation (not editable)

en: Center point of slice line
en_AU: Centre point of slice line

en: Center
en_AU: Centre

en: Minimize gaps
en_AU: Minimise gaps

en: Minimize gaps between scaled objects (does not work with rotation/diagonal mode)
en_AU: Minimise gaps between scaled objects (does not work with rotation/diagonal mode)

en: Randomize horizontal gaps
en_AU: Randomise horizontal gaps

en: Randomize vertical gaps
en_AU: Randomise vertical gaps

en: Randomize tile rotation
en_AU: Randomise tile rotation

en: Randomize scale
en_AU: Randomise scale

en: Randomization seed
en_AU: Randomisation seed

en: Randomize
en_AU: Randomise

en: Randomization seed for random mode for scaling, rotation and gaps
en_AU: Randomisation seed for random mode for scaling, rotation and gaps

en: Random scale (hit <b>Randomize</b> button to shuffle)
en_AU: Random scale (hit <b>Randomise</b> button to shuffle)

en: Random rotation (hit <b>Randomize</b> button to shuffle)
en_AU: Random rotation (hit <b>Randomise</b> button to shuffle)

en: Random horizontal gaps (hit <b>Randomize</b> button to shuffle)
en_AU: Random horizontal gaps (hit <b>Randomise</b> button to shuffle)

en: Random vertical gaps (hit <b>Randomize</b> button to shuffle)
en_AU: Random vertical gaps (hit <b>Randomise</b> button to shuffle)

en: Change color button parameter
en_AU: Change colour button parameter

en: <b>Chamfer</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialog, <b>Ctrl+Alt+Click</b> reset
en_AU: <b>Chamfer</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialogue, <b>Ctrl+Alt+Click</b> reset

en: <b>Inverse Chamfer</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialog, <b>Ctrl+Alt+Click</b> reset
en_AU: <b>Inverse Chamfer</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialogue, <b>Ctrl+Alt+Click</b> reset

en: <b>Inverse Fillet</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialog, <b>Ctrl+Alt+Click</b> reset
en_AU: <b>Inverse Fillet</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialogue, <b>Ctrl+Alt+Click</b> reset

en: <b>Fillet</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialog, <b>Ctrl+Alt+Click</b> reset
en_AU: <b>Fillet</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialogue, <b>Ctrl+Alt+Click</b> reset

en: <b>Chamfer</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialog, <b>Ctrl+Alt+Click</b> resets
en_AU: <b>Chamfer</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialogue, <b>Ctrl+Alt+Click</b> resets

en: <b>Inverse Chamfer</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialog, <b>Ctrl+Alt+Click</b> resets
en_AU: <b>Inverse Chamfer</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialogue, <b>Ctrl+Alt+Click</b> resets

en: <b>Inverse Fillet</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialog, <b>Ctrl+Alt+Click</b> resets
en_AU: <b>Inverse Fillet</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialogue, <b>Ctrl+Alt+Click</b> resets

en: <b>Fillet</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialog, <b>Ctrl+Alt+Click</b> resets
en_AU: <b>Fillet</b>: <b>Ctrl+Click</b> toggles type, <b>Shift+Click</b> open dialogue, <b>Ctrl+Alt+Click</b> resets

en: <b>Stroke width control point</b>: drag to alter the stroke width. <b>Ctrl+click</b> adds a control point, <b>Ctrl+Alt+click</b> deletes it, <b>Shift+click</b> launches width dialog.
en_AU: <b>Stroke width control point</b>: drag to alter the stroke width. <b>Ctrl+click</b> adds a control point, <b>Ctrl+Alt+click</b> deletes it, <b>Shift+click</b> launches width dialogue.

en: Select <b>object(s)</b> to raise.
en_AU: Select <b>objects</b> to raise.

en: Set center
en_AU: Set centre

en: <b>Scale</b> selection; with <b>%1</b> to scale uniformly; with <b>%2</b> to scale around rotation center
en_AU: <b>Scale</b> selection; with <b>%1</b> to scale uniformly; with <b>%2</b> to scale around rotation centre

en: <b>Center</b> of transformation: drag to reposition; scaling, rotation and skew with %1 also uses this center
en_AU: <b>Centre</b> of transformation: drag to reposition; scaling, rotation and skew with %1 also uses this centre

en: <b>Align</b> objects to center; <b>Shift</b> click to center vertically instead of horizontally.
en_AU: <b>Align</b> objects to centre; <b>Shift</b> click to centre vertically instead of horizontally.

en: Reset center
en_AU: Reset centre

en: Move <b>center</b> to %s, %s
en_AU: Move <b>centre</b> to %s, %s

en: _Fill Color
en_AU: _Fill Colour

en: _Stroke Color
en_AU: _Stroke Colour

en: Randomize the horizontal shift by this percentage
en_AU: Randomise the horizontal shift by this percentage

en: Randomize the vertical shift by this percentage
en_AU: Randomise the vertical shift by this percentage

en: Randomize the horizontal scale by this percentage
en_AU: Randomise the horizontal scale by this percentage

en: Randomize the vertical scale by this percentage
en_AU: Randomise the vertical scale by this percentage

en: Randomize the rotation angle by this percentage
en_AU: Randomise the rotation angle by this percentage

en: Randomize the tile opacity by this percentage
en_AU: Randomise the tile opacity by this percentage

en: Co_lor
en_AU: Co_lour

en: Initial color:
en_AU: Initial colour:

en: Initial color of tiled clones
en_AU: Initial colour of tiled clones

en: Initial color for clones (works only if the original has unset fill or stroke or on spray tool in copy mode)
en_AU: Initial colour for clones (works only if the original has unset fill or stroke or on spray tool in copy mode)

en: Randomize the tile hue by this percentage
en_AU: Randomise the tile hue by this percentage

en: Change the color saturation by this percentage for each row
en_AU: Change the colour saturation by this percentage for each row

en: Change the color saturation by this percentage for each column
en_AU: Change the colour saturation by this percentage for each column

en: Randomize the color saturation by this percentage
en_AU: Randomise the colour saturation by this percentage

en: Change the color lightness by this percentage for each row
en_AU: Change the colour lightness by this percentage for each row

en: Change the color lightness by this percentage for each column
en_AU: Change the colour lightness by this percentage for each column

en: Randomize the color lightness by this percentage
en_AU: Randomise the colour lightness by this percentage

en: Alternate the sign of color changes for each row
en_AU: Alternate the sign of colour changes for each row

en: Alternate the sign of color changes for each column
en_AU: Alternate the sign of colour changes for each column

en: Pick the visible color and opacity
en_AU: Pick the visible colour and opacity

en: Pick the Red component of the color
en_AU: Pick the Red component of the colour

en: Pick the Green component of the color
en_AU: Pick the Green component of the colour

en: Pick the Blue component of the color
en_AU: Pick the Blue component of the colour

en: Pick the hue of the color
en_AU: Pick the hue of the colour

en: Pick the saturation of the color
en_AU: Pick the saturation of the colour

en: Pick the lightness of the color
en_AU: Pick the lightness of the colour

en: Randomize:
en_AU: Randomise:

en: Randomize the picked value by this percentage
en_AU: Randomise the picked value by this percentage

en: Each clone is painted by the picked color (the original must have unset fill or stroke)
en_AU: Each clone is painted by the picked colour (the original must have unset fill or stroke)

note: TRANSLATORS: "change" is a noun here
en: Reset all shifts, scales, rotates, opacity and color changes in the dialog to zero
en_AU: Reset all shifts, scales, rotates, opacity and colour changes in the dialogue to zero

en: <small>Randomize:</small>
en_AU: <small>Randomise:</small>

en: Color: <b>%1</b>; <b>Click</b> to set fill, <b>Shift+click</b> to set stroke
en_AU: Colour: <b>%1</b>; <b>Click</b> to set fill, <b>Shift+click</b> to set stroke

en: Set stroke color to none
en_AU: Set stroke colour to none

en: Set fill color to none
en_AU: Set fill colour to none

en: Set stroke color from swatch
en_AU: Set stroke colour from swatch

en: Set fill color from swatch
en_AU: Set fill colour from swatch

en: Unpin Color
en_AU: Unpin Colour

en: Pin Color
en_AU: Pin Colour

en: You can drop dockable dialogs here.
en_AU: You can drop dockable dialogues here.

en: Dialog Window
en_AU: Dialogue Window

en: Guide co_lor:
en_AU: Guide co_lour:

en: Guideline color
en_AU: Guideline colour

en: Color of guidelines
en_AU: Colour of guidelines

en: _Highlight color:
en_AU: _Highlight colour:

en: Highlighted guideline color
en_AU: Highlighted guideline colour

en: Color of a guideline when it is under mouse
en_AU: Colour of a guideline when it is under mouse

en: Desk color
en_AU: Desk colour

en: Border color
en_AU: Border colour

en: Link Color Profile
en_AU: Link Colour Profile

en: Remove linked color profile
en_AU: Remove linked colour profile

en: <b>Linked Color Profiles:</b>
en_AU: <b>Linked Colour Profiles:</b>

en: <b>Available Color Profiles:</b>
en_AU: <b>Available Colour Profiles:</b>

en: <b>License</b>
en_AU: <b>Licence</b>

en: Minor grid line _color:
en_AU: Minor grid line _colour:

en: Minor grid line color
en_AU: Minor grid line colour

en: Color of the minor grid lines
en_AU: Colour of the minor grid lines

en: Ma_jor grid line color:
en_AU: Ma_jor grid line colour:

en: Major grid line color
en_AU: Major grid line colour

en: Color of the major (highlighted) grid lines
en_AU: Colour of the major (highlighted) grid lines

en: Change grid color
en_AU: Change grid colour

en: Export Color Palette
en_AU: Export Colour Palette

en: Color profiles
en_AU: Colour profiles

en: Color used to fill the image background
en_AU: Colour used to fill the image background

en: Color used to fill background
en_AU: Colour used to fill background

en: Export as SVG 1.1 per settings in Preferences dialog
en_AU: Export as SVG 1.1 per settings in Preferences dialogue

en: Select color
en_AU: Select colour

note: TRANSLATORS: this dialog is accessible via menu Filters - Filter editor
en: This matrix determines a linear transform on color space. Each line affects one of the color components. Each column determines how much of each color component from the input is passed to the output. The last column does not depend on input colors, so can be used to adjust a constant component value.
en_AU: This matrix determines a linear transform on colour space. Each line affects one of the colour components. Each column determines how much of each colour component from the input is passed to the output. The last column does not depend on input colours, so can be used to adjust a constant component value.

en: Color editing
en_AU: Colour editing

en: Provides erode and dilate effects. For single-color objects erode makes the object thinner and dilate makes it thicker.
en_AU: Provides erode and dilate effects. For single-colour objects erode makes the object thinner and dilate makes it thicker.

en: Modifies pixel colors based on a transformation matrix. Useful for adjusting color hue and saturation.
en_AU: Modifies pixel colours based on a transformation matrix. Useful for adjusting colour hue and saturation.

en: Manipulates color components according to particular transfer functions. Useful for brightness and contrast adjustment, color balance, and thresholding.
en_AU: Manipulates colour components according to particular transfer functions. Useful for brightness and contrast adjustment, colour balance, and thresholding.

en: Fills the region with a given color and opacity. Often used as input to other filters to apply color to a graphic.
en_AU: Fills the region with a given colour and opacity. Often used as input to other filters to apply colour to a graphic.

en: Indicates the type of matrix operation. The keyword 'matrix' indicates that a full 5x4 matrix of values will be provided. The other keywords represent convenience shortcuts to allow commonly used color operations to be performed without specifying a complete matrix.
en_AU: Indicates the type of matrix operation. The keyword 'matrix' indicates that a full 5x4 matrix of values will be provided. The other keywords represent convenience shortcuts to allow commonly used colour operations to be performed without specifying a complete matrix.

en: This matrix describes the convolve operation that is applied to the input image in order to calculate the pixel colors at the output. Different arrangements of values in this matrix result in various possible visual effects. An identity matrix would lead to a motion blur effect (parallel to the matrix diagonal) while a matrix filled with a constant non-zero value would lead to a common blur effect.
en_AU: This matrix describes the convolve operation that is applied to the input image in order to calculate the pixel colours at the output. Different arrangements of values in this matrix result in various possible visual effects. An identity matrix would lead to a motion blur effect (parallel to the matrix diagonal) while a matrix filled with a constant non-zero value would lead to a common blur effect.

en: Determines how to extend the input image as necessary with color values so that the matrix operations can be applied when the kernel is positioned at or near the edge of the input image.
en_AU: Determines how to extend the input image as necessary with colour values so that the matrix operations can be applied when the kernel is positioned at or near the edge of the input image.

en: Diffuse Color:
en_AU: Diffuse Colour:

en: Defines the color of the light source
en_AU: Defines the colour of the light source

en: Color component that controls the displacement in the X direction
en_AU: Colour component that controls the displacement in the X direction

en: Color component that controls the displacement in the Y direction
en_AU: Colour component that controls the displacement in the Y direction

en: Color:
en_AU: Colour:

en: The whole filter region will be filled with this color.
en_AU: The whole filter region will be filled with this colour.

en: Specular Color:
en_AU: Specular Colour:

en: ACB file header not recognized.
en_AU: ACB file header not recognised.

en: ACB file color space not supported.
en_AU: ACB file colour space not supported.

en: Palette color space unexpected.
en_AU: Palette colour space unexpected.

en: ASE file header not recognized.
en_AU: ASE file header not recognised.

en: ASE color mode not recognized:
en_AU: ASE colour mode not recognised:

en: Gimp Color Palette
en_AU: Gimp Colour Palette

en: Adobe Color Book
en_AU: Adobe Colour Book

en: Load color palette
en_AU: Load colour palette

en: Path outline color
en_AU: Path outline colour

en: Selects the color used for showing the path outline
en_AU: Selects the colour used for showing the path outline

en: Visualize the direction of selected paths by drawing small arrows in the middle of each outline segment
en_AU: Visualise the direction of selected paths by drawing small arrows in the middle of each outline segment

en: Move handles next to deleted nodes to resemble original shape; hold Ctrl to get the other behavior
en_AU: Move handles next to deleted nodes to resemble original shape; hold Ctrl to get the other behaviour

en: Show font substitution warning dialog
en_AU: Show font substitution warning dialogue

en: Show font substitution warning dialog when requested fonts are not available on the system
en_AU: Show font substitution warning dialogue when requested fonts are not available on the system

en: Color for symbolic icons:
en_AU: Colour for symbolic icons:

en: Color for symbolic success icons:
en_AU: Colour for symbolic success icons:

en: Color for symbolic warning icons:
en_AU: Colour for symbolic warning icons:

en: Color for symbolic error icons:
en_AU: Colour for symbolic error icons:

en: Use default base color for icons
en_AU: Use default base colour for icons

en: Use default highlight colors for icons
en_AU: Use default highlight colours for icons

en: Icon color base
en_AU: Icon colour base

en: Base color for icons
en_AU: Base colour for icons

en: Icon color highlights
en_AU: Icon colour highlights

en: Highlight colors supported by some symbolic icon themes
en_AU: Highlight colours supported by some symbolic icon themes

en: Reset theme colors for some symbolic icon themes
en_AU: Reset theme colours for some symbolic icon themes

en: Color theme:
en_AU: Colour theme:

en: Syntax coloring for XML Editor
en_AU: Syntax colouring for XML Editor

en: Native open/save dialogs
en_AU: Native open/save dialogues

en: GTK open/save dialogs
en_AU: GTK open/save dialogues

en: Dialogs are hidden in taskbar
en_AU: Dialogues are hidden in taskbar

[ctx: Window size]
en: Maximized
en_AU: Maximised

en: Use Windows like open and save dialogs
en_AU: Use Windows like open and save dialogues

en: Use GTK open and save dialogs
en_AU: Use GTK open and save dialogues

en: Dialogs settings
en_AU: Dialogues settings

en: Allow dialog docking
en_AU: Allow dialogue docking

en: Disable dialog docking
en_AU: Disable dialogue docking

en: Dialog behavior
en_AU: Dialogue behaviour

en: Dialogs are treated as regular windows
en_AU: Dialogues are treated as regular windows

en: Dialogs stay on top of document windows
en_AU: Dialogues stay on top of document windows

en: Dialog on top
en_AU: Dialogue on top

en: Dialog names will be displayed when there is enough space
en_AU: Dialogue names will be displayed when there is enough space

en: Only show dialog icons
en_AU: Only show dialogue icons

en: Labels behavior
en_AU: Labels behaviour

en: Save and restore dialogs' status
en_AU: Save and restore dialogues' status

en: Whether dialog windows are to be hidden in the window manager taskbar
en_AU: Whether dialogue windows are to be hidden in the window manager taskbar

en: Text and Font dialog
en_AU: Text and Font dialogue

en: Use compact color selector mode switch
en_AU: Use compact colour selector mode switch

en: Use compact combo box for selecting color modes
en_AU: Use compact combo box for selecting colour modes

en: Visible color pickers
en_AU: Visible colour pickers

en: Select color pickers
en_AU: Select colour pickers

en: Color Selector
en_AU: Colour Selector

en: Line color when zooming out
en_AU: Line colour when zooming out

en: The gridlines will be shown in minor grid line color
en_AU: The gridlines will be shown in minor grid line colour

en: The gridlines will be shown in major grid line color
en_AU: The gridlines will be shown in major grid line colour

en: Minor grid line color:
en_AU: Minor grid line colour:

en: Color used for normal grid lines
en_AU: Colour used for normal grid lines

en: Major grid line color:
en_AU: Major grid line colour:

en: Color used for major (highlighted) grid lines
en_AU: Colour used for major (highlighted) grid lines

en: Color used for block margins
en_AU: Colour used for block margins

en: Color used for grid blocks
en_AU: Colour used for grid blocks

en: When this option is on, the "Save as..." and "Save a Copy..." dialogs will always open in the directory where the currently open document is; when it's off, each will open in the directory where you last saved a file using it
en_AU: When this option is on, the "Save as..." and "Save a Copy..." dialogues will always open in the directory where the currently open document is; when it's off, each will open in the directory where you last saved a file using it

en: Show all outputs in Export Dialog
en_AU: Show all outputs in Export Dialogue

en: Will list all possible output extensions in the Export Dialog selection.
en_AU: Will list all possible output extensions in the Export Dialogue selection.

en: Use named colors
en_AU: Use named colours

en: If set, write the CSS name of the color when available (e.g. 'red' or 'magenta') instead of the numeric value
en_AU: If set, write the CSS name of the colour when available (e.g. 'red' or 'magenta') instead of the numeric value

en: Optimized
en_AU: Optimised

en: Path data should be written: only with absolute coordinates, only with relative coordinates, or optimized for string length (mixed absolute and relative coordinates)
en_AU: Path data should be written: only with absolute coordinates, only with relative coordinates, or optimised for string length (mixed absolute and relative coordinates)

en: Use correct marker colors in SVG 1.1 renderers
en_AU: Use correct marker colours in SVG 1.1 renderers

en: Relative Colorimetric
en_AU: Relative Colourimetric

en: Absolute Colorimetric
en_AU: Absolute Colourimetric

en: Use a user-specified ICC profile for monitor color correction. Warning: System wide color correction should be disabled.
en_AU: Use a user-specified ICC profile for monitor colour correction. Warning: System wide colour correction should be disabled.

en: Mark out of gamut colors
en_AU: Mark out of gamut colours

en: Highlights colors that are out of gamut for the target device
en_AU: Highlights colours that are out of gamut for the target device

en: Out of gamut warning color:
en_AU: Out of gamut warning colour:

en: Selects the color used for out of gamut warning
en_AU: Selects the colour used for out of gamut warning

en: Color management
en_AU: Colour management

en: Automatically save the current document(s) at a given interval, thus minimizing loss in case of a crash
en_AU: Automatically save the current document(s) at a given interval, thus minimising loss in case of a crash

en: Behavior
en_AU: Behaviour

en: Color stock markers the same color as object
en_AU: Colour stock markers the same colour as object

en: Color custom markers the same color as object
en_AU: Colour custom markers the same colour as object

en: Update marker color when object color changes
en_AU: Update marker colour when object colour changes

en: Stroke color same as object, fill color either object fill color or marker fill color
en_AU: Stroke colour same as object, fill colour either object fill colour or marker fill colour

en: Pop-up linking and scaling dialog when importing bitmap image.
en_AU: Pop-up linking and scaling dialogue when importing bitmap image.

en: Pop-up linking and scaling dialog when importing SVG image.
en_AU: Pop-up linking and scaling dialogue when importing SVG image.

en: Select a file of predefined shortcuts and modifiers to use. Any customizations you create will be added separately to %1
en_AU: Select a file of predefined shortcuts and modifiers to use. Any customisations you create will be added separately to %1

en: Remove all your customized keyboard shortcuts, and revert to the shortcuts in the shortcut file listed above
en_AU: Remove all your customised keyboard shortcuts, and revert to the shortcuts in the shortcut file listed above

en: Favorites
en_AU: Favourites

en: Highlight Color:
en_AU: Highlight Colour:

en: Highlight Color
en_AU: Highlight Colour

en: <small><i>Enter JavaScript code for interactive behavior in a browser.</i></small>
en_AU: <small><i>Enter JavaScript code for interactive behaviour in a browser.</i></small>

en: Set item highlight color
en_AU: Set item highlight colour

en: Highlight color
en_AU: Highlight colour

[ctx: Polar arrange tab]
en: Y coordinate of the center
en_AU: Y coordinate of the centre

[ctx: Polar arrange tab]
en: X coordinate of the center
en_AU: X coordinate of the centre

[ctx: Polar arrange tab]
en: Objects' rotational centers
en_AU: Objects' rotational centres

[ctx: Polar arrange tab]
en: Parameterized:
en_AU: Parameterised:

[ctx: Polar arrange tab]
en: Center X/Y:
en_AU: Centre X/Y:

en: No glyph selected in the SVGFonts dialog.
en_AU: No glyph selected in the SVGFonts dialogue.

en: Automatic panel layout:
    changes with dialog size
en_AU: Automatic panel layout:
    changes with dialogue size

en: Drop color on gradient
en_AU: Drop colour on gradient

en: Drop color
en_AU: Drop colour

en: Transform around center
en_AU: Transform around centre

en: When scaling, scale selection symmetrically around its rotation center. When rotating/skewing, transform relative to opposite corner/edge.
en_AU: When scaling, scale selection symmetrically around its rotation centre. When rotating/skewing, transform relative to opposite corner/edge.

en: Adjust the <b>tip radius</b> of the star or polygon; with <b>Shift</b> to round; with <b>Alt</b> to randomize
en_AU: Adjust the <b>tip radius</b> of the star or polygon; with <b>Shift</b> to round; with <b>Alt</b> to randomise

en: Adjust the <b>base radius</b> of the star; with <b>Ctrl</b> to keep star rays radial (no skew); with <b>Shift</b> to round; with <b>Alt</b> to randomize
en_AU: Adjust the <b>base radius</b> of the star; with <b>Ctrl</b> to keep star rays radial (no skew); with <b>Shift</b> to round; with <b>Alt</b> to randomise

[ctx: Transform handle tip]
en: <b>Shift+Ctrl</b>: scale uniformly about the rotation center
en_AU: <b>Shift+Ctrl</b>: scale uniformly about the rotation centre

[ctx: Transform handle tip]
en: <b>Shift+Alt</b>: scale using an integer ratio about the rotation center
en_AU: <b>Shift+Alt</b>: scale using an integer ratio about the rotation centre

[ctx: Transform handle tip]
en: <b>Shift</b>: scale from the rotation center
en_AU: <b>Shift</b>: scale from the rotation centre

[ctx: Transform handle tip]
en: <b>Rotation handle</b>: drag to rotate the selection around the rotation center
en_AU: <b>Rotation handle</b>: drag to rotate the selection around the rotation centre

[ctx: Transform handle tip]
en: <b>Shift</b>: skew about the rotation center
en_AU: <b>Shift</b>: skew about the rotation centre

[ctx: Transform handle tip]
en: <b>Rotation center</b>: drag to change the origin of transforms
en_AU: <b>Rotation centre</b>: drag to change the origin of transforms

note: TRANSLATORS: for info, see http://www.w3.org/TR/2000/CR-SVG-20000802/pservers.html#LinearGradientSpreadMethodAttribute
en: Whether to fill with flat color beyond the ends of the gradient vector (spreadMethod="pad"), or repeat the gradient in the same direction (spreadMethod="repeat"), or repeat the gradient in alternating opposite directions (spreadMethod="reflect")
en_AU: Whether to fill with flat colour beyond the ends of the gradient vector (spreadMethod="pad"), or repeat the gradient in the same direction (spreadMethod="repeat"), or repeat the gradient in alternating opposite directions (spreadMethod="reflect")

en: center is denser
en_AU: centre is denser

en: center is much denser
en_AU: centre is much denser

en: starts from center
en_AU: starts from centre

en: NOT randomized
en_AU: NOT randomised

en: visibly randomized
en_AU: visibly randomised

en: strongly randomized
en_AU: strongly randomised

en: Star: Change randomization
en_AU: Star: Change randomisation

en: Color/opacity used for color tweaking
en_AU: Colour/opacity used for colour tweaking

en: Set picked color
en_AU: Set picked colour

en: <b>Release mouse</b> to set color.
en_AU: <b>Release mouse</b> to set colour.

en: Visible Colors
en_AU: Visible Colours

en: Measure start, <b>Shift+Click</b> for position dialog
en_AU: Measure start, <b>Shift+Click</b> for position dialogue

en: Measure end, <b>Shift+Click</b> for position dialog
en_AU: Measure end, <b>Shift+Click</b> for position dialogue

en: Smoothed mesh corner color.
en_AU: Smoothed mesh corner colour.

en: Picked mesh corner color.
en_AU: Picked mesh corner colour.

en: <b>Sketch mode</b>: holding <b>Alt</b> interpolates between sketched paths. Release <b>Alt</b> to finalize.
en_AU: <b>Sketch mode</b>: holding <b>Alt</b> interpolates between sketched paths. Release <b>Alt</b> to finalise.

en: %s. Drag or click to <b>paint objects</b> with color.
en_AU: %s. Drag or click to <b>paint objects</b> with colour.

en: %s. Drag or click to <b>randomize colors</b>.
en_AU: %s. Drag or click to <b>randomise colours</b>.

en: Color paint tweak
en_AU: Colour paint tweak

en: Color jitter tweak
en_AU: Colour jitter tweak

en: Toggle color-managed display for this document window
en_AU: Toggle colour-managed display for this document window

en: Hexadecimal RGBA value of the color
en_AU: Hexadecimal RGBA value of the colour

en: Choose style of color selection
en_AU: Choose style of colour selection

en: Color Managed
en_AU: Colour Managed

en: Color Wheel
en_AU: Colour Wheel

en: grayscale
en_AU: greyscale

en: print colors preview
en_AU: print colours preview

en: Set fill color
en_AU: Set fill colour

en: Set stroke color
en_AU: Set stroke colour

[ctx: BlendMode]
en: Color Burn
en_AU: Colour Burn

[ctx: BlendMode]
en: Color Dodge
en_AU: Colour Dodge

[ctx: BlendMode]
en: Color
en_AU: Colour

en: Normal capitalization.
en_AU: Normal capitalisation.

en: Stop color
en_AU: Stop colour

en: Color profile:
en_AU: Colour profile:

en: Document license updated
en_AU: Document licence updated

en: Border and shadow color
en_AU: Border and shadow colour

en: Flat color
en_AU: Flat colour

en: <b>Flat color</b>
en_AU: <b>Flat colour</b>

en: Pattern color
en_AU: Pattern colour

en: Flat color (fill)
en_AU: Flat colour (fill)

en: Flat color (stroke)
en_AU: Flat colour (stroke)

en: Apply last set color to fill
en_AU: Apply last set colour to fill

en: Apply last set color to stroke
en_AU: Apply last set colour to stroke

en: Apply last selected color to fill
en_AU: Apply last selected colour to fill

en: Apply last selected color to stroke
en_AU: Apply last selected colour to stroke

en: Last Set Color
en_AU: Last Set Colour

en: Last Selected Color
en_AU: Last Selected Colour

en: Copy Color
en_AU: Copy Colour

en: Paste Color
en_AU: Paste Colour

en: Swatch color
en_AU: Swatch colour

en: Change swatch color
en_AU: Change swatch colour

en: Enlarge pinned colors
en_AU: Enlarge pinned colours

en: Show color labels
en_AU: Show colour labels

en: Select this on canvas (if applicable) or in the XML dialog (e.g. a pattern in the 'defs' section)
en_AU: Select this on canvas (if applicable) or in the XML dialogue (e.g. a pattern in the 'defs' section)

en: Background Color
en_AU: Background Colour

en: Set Favorite
en_AU: Set Favourite

en: Unset Favorite
en_AU: Unset Favourite

en: Layers and Objects dialog settings
en_AU: Layers and Objects dialogue settings

en: Search colors by their name
en_AU: Search colours by their name

en: Load palette of colors or swatches
en_AU: Load palette of colours or swatches

en: Show colors with names
en_AU: Show colours with names

en: Show colors in a grid
en_AU: Show colours in a grid

en: This dialog allows you to automatically convert a raster graphic into vector paths. Several options are available for different use cases:
     * "Brightness cutoff" detects areas that are darker than the threshold value and creates a path enclosing them (using potrace).
     * "Edge detection" detects changes greater than the given threshold value in the brightness of color patches and creates paths to separate them (using potrace).
     * "Color quantization" separates the image into the given number of colors, and separates them with a path (using potrace).
     * "Autotrace" uses the autotrace algorithm with the given option.
     * "Centerline tracing" tries to vectorize a line drawing (with autotrace).
     * "Multicolor" options separate the image into a number of scans, depending on brightness, color separation, or gray levels (using potrace), or using the autotrace algorithm, and create several paths for those.
     * The "Pixel art" tab allows to use an algorithm for pixel recognition or one for depixelizing to vectorize pixel art images.
    
     * NOTE:
      1) Save your work before tracing
      2) Watch your pixel count: "Trace pixel art" creates up to one path per pixel. It is not recommended for images that are not pixel art.
      3) Autotrace is slower than potrace, it is not recommended for big images. Preprocessing your images to increase contrast is recommended.
      4) If your goal is to get few nodes and good precision, manual tracing is always best.
en_AU: This dialogue allows you to automatically convert a raster graphic into vector paths. Several options are available for different use cases:
     * "Brightness cutoff" detects areas that are darker than the threshold value and creates a path enclosing them (using potrace).
     * "Edge detection" detects changes greater than the given threshold value in the brightness of colour patches and creates paths to separate them (using potrace).
     * "Colour quantisation" separates the image into the given number of colours, and separates them with a path (using potrace).
     * "Autotrace" uses the autotrace algorithm with the given option.
     * "Centreline tracing" tries to vectorise a line drawing (with autotrace).
     * "Multicolour" options separate the image into a number of scans, depending on brightness, colour separation, or grey levels (using potrace), or using the autotrace algorithm, and create several paths for those.
     * The "Pixel art" tab allows to use an algorithm for pixel recognition or one for depixellising to vectorise pixel art images.
    
     * NOTE:
      1) Save your work before tracing
      2) Watch your pixel count: "Trace pixel art" creates up to one path per pixel. It is not recommended for images that are not pixel art.
      3) Autotrace is slower than potrace, it is not recommended for big images. Preprocessing your images to increase contrast is recommended.
      4) If your goal is to get few nodes and good precision, manual tracing is always best.

en: Optimize
en_AU: Optimise

en: Try to optimize paths by joining adjacent Bezier curve segments
en_AU: Try to optimise paths by joining adjacent Bezier curve segments

en: Color quantization
en_AU: Colour quantisation

en: Increase this to reduce the number of nodes in the trace by more aggressive optimization
en_AU: Increase this to reduce the number of nodes in the trace by more aggressive optimisation

en: Grays
en_AU: Greys

en: Multicolor
en_AU: Multicolour

en: Favors connections that are part of foreground color
en_AU: Favours connections that are part of foreground colour

en: The radius of the window analyzed
en_AU: The radius of the window analysed

[ctx: loading-fonts]
en: Initializing
en_AU: Initialising

en: Optimize speed
en_AU: Optimise speed

en: Optimize quality
en_AU: Optimise quality

en: Pixelated
en_AU: Pixellated

en: <big><b>See the full details about the Inkscape licenses <a href="https://inkscape.org/about/license/">here</a>!</b></big>
en_AU: <big><b>See the full details about the Inkscape licences <a href="https://inkscape.org/about/license/">here</a>!</b></big>

en: License file failed to load.
en_AU: Licence file failed to load.

en: Inkscape license
en_AU: Inkscape licence

en: Colorful
en_AU: Colourful

en: Grayscale
en_AU: Greyscale

en: Select the default color background for the canvas
en_AU: Select the default colour background for the canvas

en: Randomized:
en_AU: Randomised:

en: Page background color used during editing and exporting
en_AU: Page background colour used during editing and exporting

en: Page border and drop shadow color
en_AU: Page border and drop shadow colour

en: Desk background color surrounding pages
en_AU: Desk background colour surrounding pages

en: If set, use a colored checkerboard for the desk background.
en_AU: If set, use a coloured checkerboard for the desk background.

en: Color:
en_AU: Colour:

en: Apply color to the current pattern
en_AU: Apply colour to the current pattern

en: Center on vertical axis
en_AU: Centre on vertical axis

en: Center on horizontal axis
en_AU: Centre on horizontal axis

en: Gray Scale
en_AU: Grey Scale

en: Color Management
en_AU: Colour Management

en: Show/Hide D_ialogs
en_AU: Show/Hide D_ialogues

en: Pick both the color and the alpha (transparency) under cursor; otherwise, pick only the visible color premultiplied by alpha
en_AU: Pick both the colour and the alpha (transparency) under cursor; otherwise, pick only the visible colour premultiplied by alpha

en: Open LPE dialog (to adapt parameters numerically)
en_AU: Open LPE dialogue (to adapt parameters numerically)

en: Pick colors for selected corner nodes from underneath mesh.
en_AU: Pick colours for selected corner nodes from underneath mesh.

en: Centers
en_AU: Centres

en: Object rotation centers
en_AU: Object rotation centres

en: No overlap between colors
en_AU: No overlap between colours

en: Pick color from the drawing. You can use clonetiler trace dialog for advanced effects. In clone mode original fill or stroke colors must be unset.
en_AU: Pick colour from the drawing. You can use clonetiler trace dialogue for advanced effects. In clone mode original fill or stroke colours must be unset.

en: Apply picked color to fill
en_AU: Apply picked colour to fill

en: Apply picked color to stroke
en_AU: Apply picked colour to stroke

en: Inverted pick value, retaining color in advanced trace mode
en_AU: Inverted pick value, retaining colour in advanced trace mode

en: Pick from center instead of average area.
en_AU: Pick from centre instead of average area.

en: Open the Font Collections dialog
en_AU: Open the Font Collections dialogue

en: Align center
en_AU: Align centre

en: COLORS AND STYLES
en_AU: COLOURS AND STYLES

en: Paint the tool's color upon selected objects
en_AU: Paint the tool's colour upon selected objects

en: Jitter the colors of selected objects
en_AU: Jitter the colours of selected objects

en: In color mode, act on object's hue
en_AU: In colour mode, act on object's hue

en: In color mode, act on object's saturation
en_AU: In colour mode, act on object's saturation

en: In color mode, act on object's lightness
en_AU: In colour mode, act on object's lightness

en: In color mode, act on object's opacity
en_AU: In colour mode, act on object's opacity

en: Area is zero, cannot calculate Center of Mass
en_AU: Area is zero, cannot calculate Centre of Mass

en: You need at least 7mm bleed to show cutting marks or color marks
en_AU: You need at least 7mm bleed to show cutting marks or colour marks

en: Please select a color profile in the document settings.
en_AU: Please select a colour profile in the document settings.

en: Please only link a single color profile in the document settings. No output generated.
en_AU: Please only link a single colour profile in the document settings. No output generated.

en: Threshold Color (1-255):
en_AU: Threshold Colour (1-255):

en: Input (r,g,b) Color Range:
en_AU: Input (r,g,b) Colour Range:

en: 
    Allows you to evaluate different functions for each channel.
    r, g and b are the normalized values of the red, green and blue channels. The resulting RGB values are automatically clamped.
    
    Example (half the red, swap green and blue):
      Red Function: r*0.5
      Green Function: b
      Blue Function: g
en_AU: 
    Allows you to evaluate different functions for each channel.
    r, g and b are the normalised values of the red, green and blue channels. The resulting RGB values are automatically clamped.
    
    Example (half the red, swap green and blue):
      Red Function: r*0.5
      Green Function: b
      Blue Function: g

en: Randomizes hue, saturation, lightness and/or opacity (opacity randomization only for objects and groups). Change the range values to limit the distance between the original color and the randomized one.
en_AU: Randomises hue, saturation, lightness and/or opacity (opacity randomisation only for objects and groups). Change the range values to limit the distance between the original colour and the randomised one.

en: Replace Color
en_AU: Replace Colour

en: Color to replace
en_AU: Colour to replace

en: From color
en_AU: From colour

en: Ignore opacity when searching for colors to replace
en_AU: Ignore opacity when searching for colours to replace

en: New color
en_AU: New colour

en: To color
en_AU: To colour

en: Visualize Path
en_AU: Visualise Path

en: 
    Apply this extension after opening an SVG file
        exported from Adobe Illustrator to:
    
    (1) Recognize and import named layers.
    
    (2) Correct document scale, if necessary.
        (Illustrator may export SVG at 75% of correct size.)
en_AU: 
    Apply this extension after opening an SVG file
        exported from Adobe Illustrator to:
    
    (1) Recognise and import named layers.
    
    (2) Correct document scale, if necessary.
        (Illustrator may export SVG at 75% of correct size.)

en: - AutoCAD Release 14 DXF format.
    - The base unit parameter specifies in what unit the coordinates are output (96 px = 1 in).
    - Supported element types
        - paths (lines and splines)
        - rectangles
        - clones (the crossreference to the original is lost)
    - ROBO-Master spline output is a specialized spline readable only by ROBO-Master and AutoDesk viewers, not Inkscape.
    - LWPOLYLINE output is a multiply-connected polyline, disable it to use a legacy version of the LINE output.
    - You can choose to export all layers, only visible ones or by name match (case insensitive and use comma ',' as separator)
en_AU: - AutoCAD Release 14 DXF format.
    - The base unit parameter specifies in what unit the coordinates are output (96 px = 1 in).
    - Supported element types
        - paths (lines and splines)
        - rectangles
        - clones (the crossreference to the original is lost)
    - ROBO-Master spline output is a specialised spline readable only by ROBO-Master and AutoDesk viewers, not Inkscape.
    - LWPOLYLINE output is a multiply-connected polyline, disable it to use a legacy version of the LINE output.
    - You can choose to export all layers, only visible ones or by name match (case insensitive and use comma ',' as separator)

en: Exports the colors of this document as GIMP Palette
en_AU: Exports the colours of this document as GIMP Palette

en: Fractalize
en_AU: Fractalise

en: Stroke Color:
en_AU: Stroke Colour:

en: Fill Color:
en_AU: Fill Colour:

en: 
    This extension renders all text (or all selected text)
    in your document into using specialized "stroke" or
    "engraving" fonts designed for plotters.
    
    Whereas regular "outline" fonts (e.g., TrueType) work
    by filling in the region inside an invisible outline,
    engraving fonts are composed only of individual lines
    or strokes; much like human handwriting.
    
    Engraving fonts are used for creating text paths that
    computer controlled drawing and cutting machines (from
    pen plotters to CNC routers) can efficiently follow.
    
    A complete user guide is available to download at:
      http://wiki.evilmadscientist.com/hershey
    
    For extended help, click "Apply" with this tab selected.
en_AU: 
    This extension renders all text (or all selected text)
    in your document into using specialised "stroke" or
    "engraving" fonts designed for plotters.
    
    Whereas regular "outline" fonts (e.g., TrueType) work
    by filling in the region inside an invisible outline,
    engraving fonts are composed only of individual lines
    or strokes; much like human handwriting.
    
    Engraving fonts are used for creating text paths that
    computer controlled drawing and cutting machines (from
    pen plotters to CNC routers) can efficiently follow.
    
    A complete user guide is available to download at:
      http://wiki.evilmadscientist.com/hershey
    
    For extended help, click "Apply" with this tab selected.

en: 
    The classic Hershey fonts included are derived from
    work by Dr. A. V. Hershey.
    
    Additional modern "EMS" fonts in this distribution are
    derivatives created from fonts licensed under the SIL
    Open Font License.
    
    For full credits and license information, please read the
    credits embedded within the SVG fonts included with this
    distribution.
en_AU: 
    The classic Hershey fonts included are derived from
    work by Dr. A. V. Hershey.
    
    Additional modern "EMS" fonts in this distribution are
    derivatives created from fonts licensed under the SIL
    Open Font License.
    
    For full credits and licence information, please read the
    credits embedded within the SVG fonts included with this
    distribution.

en: Check this to mirror the X axis (Default: Unchecked)
en_AU: Tick this to mirror the X axis (Default: Unticked)

en: Check this to mirror the Y axis (Default: Unchecked)
en_AU: Tick this to mirror the Y axis (Default: Unticked)

en: Center zero point
en_AU: Centre zero point

en: Check this if your plotter uses a centered zero point (Default: Unchecked)
en_AU: Tick this if your plotter uses a centred zero point (Default: Unticked)

en: Check this to cut a small line before the real drawing starts to correctly align the tool orientation. (Default: Checked)
en_AU: Tick this to cut a small line before the real drawing starts to correctly align the tool orientation. (Default: Ticked)

en: Check this to auto align the drawing to the zero point (Plus the tool offset if used). If unchecked you have to make sure that all parts of your drawing are within the document border! (Default: Checked)
en_AU: Tick this to auto align the drawing to the zero point (Plus the tool offset if used). If unticked you have to make sure that all parts of your drawing are within the document border! (Default: Ticked)

en: The first option rediscretizes both paths before the interpolation with the other path's node positions. The second option removes extra nodes of the longer path.
en_AU: The first option rediscretises both paths before the interpolation with the other path's node positions. The second option removes extra nodes of the longer path.

en: Path Colors
en_AU: Path Colours

en: Set path color to blue:
en_AU: Set path colour to blue:

en: Set path color to cyan:
en_AU: Set path colour to cyan:

en: Set path color to green:
en_AU: Set path colour to green:

en: Set path color to black:
en_AU: Set path colour to black:

en: Set path color to magenta:
en_AU: Set path colour to magenta:

en: Set path color to orange:
en_AU: Set path colour to orange:

en: Set path color to red:
en_AU: Set path colour to red:

en: Set path color to white:
en_AU: Set path colour to white:

en: Set path color to yellow:
en_AU: Set path colour to yellow:

en: This extension allows you customize the key bindings JessyInk uses. Please see code.google.com/p/jessyink for more details.
en_AU: This extension allows you customise the key bindings JessyInk uses. Please see code.google.com/p/jessyink for more details.

en: This extension allows you customize the mouse handler JessyInk uses. Please see code.google.com/p/jessyink for more details.
en_AU: This extension allows you customise the mouse handler JessyInk uses. Please see code.google.com/p/jessyink for more details.

en: If the export already exists, it will skip it and color the rectangle GREY. If the "Overwrite existing exports" checkbox is selected, and the file was previously generated, it will color the rectangle RED. For new exports that did not previously exist, the rectangle will be GREEN.
en_AU: If the export already exists, it will skip it and colour the rectangle GREY. If the "Overwrite existing exports" tick box is selected, and the file was previously generated, it will colour the rectangle RED. For new exports that did not previously exist, the rectangle will be GREEN.

en: Randomize step (%):
en_AU: Randomise step (%):

en: Randomize angle (%):
en_AU: Randomise angle (%):

en: 
    The path is generated by applying the 
    substitutions of Rules to the Axiom, 
    Order times. The following commands are 
    recognized in Axiom and Rules:
    
    Any of A,B,C,D,E,F: draw forward 
    
    Any of G,H,I,J,K,L: move forward 
    
    +: turn left
    
    -: turn right
    
    |: turn 180 degrees
    
    [: remember point
    
    ]: return to remembered point
    
    Multiple rules can be provided by 
    separating them with a semicolon (;).
en_AU: 
    The path is generated by applying the 
    substitutions of Rules to the Axiom, 
    Order times. The following commands are 
    recognised in Axiom and Rules:
    
    Any of A,B,C,D,E,F: draw forward 
    
    Any of G,H,I,J,K,L: move forward 
    
    +: turn left
    
    -: turn right
    
    |: turn 180 degrees
    
    [: remember point
    
    ]: return to remembered point
    
    Multiple rules can be provided by 
    separating them with a semicolon (;).

en: Fill shadow with stroke color of selected object(s) if set
en_AU: Fill shadow with stroke colour of selected object(s) if set

en: Color Markers
en_AU: Colour Markers

en: Invert fill and stroke colors
en_AU: Invert fill and stroke colours

en: Assign fill color
en_AU: Assign fill colour

en: Assign stroke color
en_AU: Assign stroke colour

[ctx: measure extension]
en: Center of Mass
en_AU: Centre of Mass

en: Fixed Text, Center of BBox
en_AU: Fixed Text, Centre of BBox

en: Fixed Text, Center of Mass
en_AU: Fixed Text, Centre of Mass

en: Center (Middle)
en_AU: Centre (Middle)

en: This effect measures the length, area, or center-of-mass of the selected paths. Length and area are added as a text object with the selected units. Center-of-mass is shown as a cross symbol.
    
      * Text display format can be either Text-On-Path, or stand-alone text at a specified angle.
      * The number of significant digits can be controlled by the Precision field.
      * The Offset field controls the distance from the text to the path.
      * The Scale factor can be used to make measurements in scaled drawings. For example, if 1 cm in the drawing equals 2.5 m in the real world, Scale must be set to 250.
      * When calculating area, the result should be precise for polygons and Bezier curves. If a circle is used, the area may be too high by as much as 0.03%.
en_AU: This effect measures the length, area, or centre-of-mass of the selected paths. Length and area are added as a text object with the selected units. Centre-of-mass is shown as a cross symbol.
    
      * Text display format can be either Text-On-Path, or stand-alone text at a specified angle.
      * The number of significant digits can be controlled by the Precision field.
      * The Offset field controls the distance from the text to the path.
      * The Scale factor can be used to make measurements in scaled drawings. For example, if 1 cm in the drawing equals 2.5 m in the real world, Scale must be set to 250.
      * When calculating area, the result should be precise for polygons and Bezier curves. If a circle is used, the area may be too high by as much as 0.03%.

en: Font color:
en_AU: Font colour:

en: Color scheme:
en_AU: Colour scheme:

en: Custom colors:
en_AU: Custom colours:

en: Reverse color scheme
en_AU: Reverse colour scheme

en: Area fill shift
en_AU: Filling method

en: 
    Usage:
    1. Select all Area Offsets (gray outlines)
    2. Object/Ungroup (Shift+Ctrl+G)
    3. Press Apply
    
    Suspected small objects will be marked out by colored arrows.
en_AU: 
    Usage:
    1. Select all Area Offsets (grey outlines)
    2. Object/Ungroup (Shift+Ctrl+G)
    3. Press Apply
    
    Suspected small objects will be marked out by coloured arrows.

en: 
    Biarc interpolation tolerance is the maximum distance between path and its approximation.
    The segment will be split into two segments if the distance between path's segment and its approximation exceeds biarc interpolation tolerance.
    For depth function c=color intensity from 0.0 (white) to 1.0 (black), d is the depth defined by orientation points, s - surface defined by orientation points.
en_AU: 
    Biarc interpolation tolerance is the maximum distance between path and its approximation.
    The segment will be split into two segments if the distance between path's segment and its approximation exceeds biarc interpolation tolerance.
    For depth function c=colour intensity from 0.0 (white) to 1.0 (black), d is the depth defined by orientation points, s - surface defined by orientation points.

en: Parameterize Gcode
en_AU: Parameterise Gcode

en: Flip y axis and parameterize Gcode
en_AU: Flip y axis and parameterise Gcode

en: Create linearization preview
en_AU: Create linearisation preview

en: Optimized SVG Output
en_AU: Optimised SVG Output

en: Shorten color values
en_AU: Shorten colour values

en: Convert all color specifications to #RRGGBB (or #RGB where applicable) format.
en_AU: Convert all colour specifications to #RRGGBB (or #RGB where applicable) format.

en: Create groups for runs of elements having at least one attribute in common (e.g. fill-color, stroke-opacity, ...).
en_AU: Create groups for runs of elements having at least one attribute in common (e.g. fill-colour, stroke-opacity, ...).

en: Remove metadata tags along with all the contained information, which may include license and author information, alternate versions for non-SVG-enabled browsers, etc.
en_AU: Remove metadata tags along with all the contained information, which may include licence and author information, alternate versions for non-SVG-enabled browsers, etc.

en: Minimize the length of IDs using only lowercase letters, assigning the shortest values to the most-referenced elements. For instance, "linearGradient5621" will become "a" if it is the most used element.
en_AU: Minimise the length of IDs using only lowercase letters, assigning the shortest values to the most-referenced elements. For instance, "linearGradient5621" will become "a" if it is the most used element.

en: Optimized SVG Output is provided by
en_AU: Optimised SVG Output is provided by

en: Optimized SVG (*.svg)
en_AU: Optimised SVG (*.svg)

en: The Parity of your serial connection, 99% of all plotters use the default setting (default: None)
en_AU: Note: Bond Weight # calculations are a best-guess estimate.

en: The speed the pen will move with in centimeters or millimeters per second (depending on your plotter model). Set to 0 to omit command. Most plotters ignore this command (default: 0). Can be defined in the layer name together with the pen number (e.g. 'Pen 3 Speed 10').
en_AU: The speed the pen will move with in centimetres or millimetres per second (depending on your plotter model). Set to 0 to omit command. Most plotters ignore this command (default: 0). Can be defined in the layer name together with the pen number (e.g. 'Pen 3 Speed 10').

en: Center origin
en_AU: Centre origin

en: Fill color, Red:
en_AU: Fill colour, Red:

en: Fill color, Green:
en_AU: Fill colour, Green:

en: Fill color, Blue:
en_AU: Fill colour, Blue:

en: Color Bars
en_AU: Colour Bars

en: Optimized PNG
en_AU: Optimised PNG

en: Optimize PNG with 'optipng'
en_AU: Optimise PNG with 'optipng'

en: Allow color type reduction
en_AU: Allow colour type reduction

en: Optimized PNG (*.png)
en_AU: Optimised PNG (*.png)

en: Optimize PNG output for file size.
en_AU: Optimise PNG output for file size.

en: Invert the colors, may fail for symbols option
en_AU: Invert the colours, may fail for symbols option

en: Diameter of center hole (0 for none):
en_AU: Diameter of centre hole (0 for none):

en: Unit of measurement for both circular pitch and center diameter.
en_AU: Unit of measurement for both circular pitch and centre diameter.

en: Show color reference
en_AU: Show colour reference

en: Behavior:
en_AU: Behaviour:

en: Year color:
en_AU: Year colour:

en: Month color:
en_AU: Month colour:

en: Weekday name color:
en_AU: Weekday name colour:

en: Day color:
en_AU: Day colour:

en: Weekend day color:
en_AU: Weekend day colour:

en: Next month day color:
en_AU: Next month day colour:

en: Week number color:
en_AU: Week number colour:

en: Localization
en_AU: Localisation

en: Triangles color
en_AU: Triangles colour

en: Triangles with item color
en_AU: Triangles with item colour

en: Triangles with item color (random on apply)
en_AU: Triangles with item colour (random on apply)

en: Background color:
en_AU: Background colour:

en: Top and Center
en_AU: Top and Centre

en: Middle and Center
en_AU: Middle and Centre

en: Bottom and Center
en_AU: Bottom and Centre

en: Export Layout Pieces and HTML+CSS code
en_AU: Export layout pieces and HTML+CSS code

en: It uses vector graphics to allow for sharp printouts and renderings at unlimited resolution and is not bound to a fixed number of pixels like raster graphics. Inkscape uses the standardized SVG file format as its main format, which is supported by many other applications including web browsers.
en_AU: It uses vector graphics to allow for sharp printouts and renderings at unlimited resolution and is not bound to a fixed number of pixels like raster graphics. Inkscape uses the standardised SVG file format as its main format, which is supported by many other applications including web browsers.

en: Customizable handles
en_AU: Customisable handles

en: Document resources dialog
en_AU: Document resources dialogue

en: Single dialog for alignment options
en_AU: Single dialogue for alignment options

en: Gradient editing in Fill and Stroke dialog
en_AU: Gradient editing in Fill and Stroke dialogue

en: More customization options
en_AU: More customisation options

en: Welcome dialog
en_AU: Welcome dialogue

en: Complete rework of the dialog docking system
en_AU: Complete rework of the dialogue docking system

en: Search field in Preferences dialog
en_AU: Search field in Preferences dialogue

en: Improved Export PNG dialog
en_AU: Improved Export PNG dialogue

en: Ability to directly export JPG, TIFF, optimized PNG, and WebP
en_AU: Ability to directly export JPG, TIFF, optimised PNG, and WebP

en: Theming support and more new customization options
en_AU: Theming support and more new customisation options

en: Native support for macOS with a signed and notarized .dmg file
en_AU: Native support for macOS with a signed and notarised .dmg file

en: Integrated centerline tracing for vectorizing line drawings
en_AU: Integrated centreline tracing for vectorising line drawings

en: Searchable Symbols dialog
en_AU: Searchable Symbols dialogue

en: New Live Path Effect (LPE) selection dialog
en_AU: New Live Path Effect (LPE) selection dialogue

en: The color slider can be constrained to stepped values
en_AU: The colour slider can be constrained to stepped values

en: Improved fill and stroke HSL color selection
en_AU: Improved fill and stroke HSL colour selection

en: An additional handle at the center of shapes
en_AU: An additional handle at the centre of shapes

en: millimeter
en_AU: millimetre

en: millimeters
en_AU: millimetres

en: Millimeters (25.4 mm/in)
en_AU: Millimetres (25.4 mm/in)

en: centimeter
en_AU: centimetre

en: centimeters
en_AU: centimetres

en: Centimeters (10 mm/cm)
en_AU: Centimetres (10 mm/cm)
