libexif 0.6.17.1 - en to en_CA translation catalogue (59 entries)

en: Grayscale
en_CA: Greyscale

en: My colors
en_CA: My colours

en: Color accent
en_CA: Colour accent

en: Color swap
en_CA: Colour swap

en: 2x
en_CA: 2×

en: 4x
en_CA: 4×

en: Center-weighted average
en_CA: Centre-weighted average

en: Center
en_CA: Centre

en: Canon MP-E 65mm f/2.8 1-5x Macro Photo
en_CA: Canon MP-E 65mm f/2.8 1-5× Macro Photo

en: My color data
en_CA: My colour data

en: Center-right
en_CA: Centre-right

en: Left-center
en_CA: Left-centre

en: 2x2 matrix (clockwise)
en_CA: 2×2 matrix (clockwise)

en: Color Information
en_CA: Colour Information

en: Color Tone
en_CA: Colour Tone

en: One-chip color area sensor
en_CA: One-chip colour area sensor

en: Two-chip color area sensor
en_CA: Two-chip colour area sensor

en: Three-chip color area sensor
en_CA: Three-chip colour area sensor

en: Color sequential area sensor
en_CA: Colour sequential area sensor

en: Color sequential linear sensor
en_CA: Colour sequential linear sensor

en: Centered
en_CA: Centred

en: Center-weight
en_CA: Centre-weight

en: Centimeter
en_CA: Centimetre

en:  (%.02f cd/m^2)
en_CA:  (%.02f cd/m²)

en: Indicates the altitude used as the reference altitude. If the reference is sea level and the altitude is above sea level, 0 is given. If the altitude is below sea level, a value of 1 is given and the altitude is indicated as an absolute value in the GPSAltitude tag. The reference unit is meters. Note that this tag is BYTE type, unlike other reference tags.
en_CA: Indicates the altitude used as the reference altitude. If the reference is sea level and the altitude is above sea level, 0 is given. If the altitude is below sea level, a value of 1 is given and the altitude is indicated as an absolute value in the GPSAltitude tag. The reference unit is metres. Note that this tag is BYTE type, unlike other reference tags.

en: Indicates the altitude based on the reference in GPSAltitudeRef. Altitude is expressed as one RATIONAL value. The reference unit is meters.
en_CA: Indicates the altitude based on the reference in GPSAltitudeRef. Altitude is expressed as one RATIONAL value. The reference unit is metres.

en: Indicates the unit used to express the GPS receiver speed of movement. 'K', 'M' and 'N' represent kilometers per hour, miles per hour, and knots.
en_CA: Indicates the unit used to express the GPS receiver speed of movement. 'K' 'M' and 'N' represent kilometres per hour, miles per hour, and knots.

en: Indicates the unit used to express the distance to the destination point. 'K', 'M' and 'N' represent kilometers, miles and nautical miles.
en_CA: Indicates the unit used to express the distance to the destination point. 'K', 'M' and 'N' represent kilometres, miles and nautical miles.

en: A transfer function for the image, described in tabular style. Normally this tag is not necessary, since color space is specified in the color space information tag (<ColorSpace>).
en_CA: A transfer function for the image, described in tabular style. Normally this tag is not necessary, since colour space is specified in the colour space information tag (<ColorSpace>).

en: The chromaticity of the white point of the image. Normally this tag is not necessary, since color space is specified in the color space information tag (<ColorSpace>).
en_CA: The chromaticity of the white point of the image. Normally this tag is not necessary, since colour space is specified in the colour space information tag (<ColorSpace>).

en: The chromaticity of the three primary colors of the image. Normally this tag is not necessary, since color space is specified in the color space information tag (<ColorSpace>).
en_CA: The chromaticity of the three primary colours of the image. Normally this tag is not necessary, since colour space is specified in the colour space information tag (<ColorSpace>).

en: The matrix coefficients for transformation from RGB to YCbCr image data. No default is given in TIFF; but here the value given in "Color Space Guidelines", is used as the default. The color space is declared in a color space information tag, with the default being the value that gives the optimal image characteristics Interoperability this condition.
en_CA: The matrix coefficients for transformation from RGB to YCbCr image data. No default is given in TIFF; but here the value given in "Color Space Guidelines", is used as the default. The colour space is declared in a colour space information tag, with the default being the value that gives the optimal image characteristics Interoperability this condition.

en: The position of chrominance components in relation to the luminance component. This field is designated only for JPEG compressed data or uncompressed YCbCr data. The TIFF default is 1 (centered); but when Y:Cb:Cr = 4:2:2 it is recommended in this standard that 2 (co-sited) be used to record data, in order to improve the image quality when viewed on TV systems. When this field does not exist, the reader shall assume the TIFF default. In the case of Y:Cb:Cr = 4:2:0, the TIFF default (centered) is recommended. If the reader does not have the capability of supporting both kinds of <YCbCrPositioning>, it shall follow the TIFF default regardless of the value in this field. It is preferable that readers be able to support both centered and co-sited positioning.
en_CA: The position of chrominance components in relation to the luminance component. This field is designated only for JPEG compressed data or uncompressed YCbCr data. The TIFF default is 1 (centred); but when Y:Cb:Cr = 4:2:2 it is recommended in this standard that 2 (co-sited) be used to record data, in order to improve the image quality when viewed on TV systems. When this field does not exist, the reader shall assume the TIFF default. In the case of Y:Cb:Cr = 4:2:0, the TIFF default (centred) is recommended. If the reader does not have the capability of supporting both kinds of <YCbCrPositioning>, it shall follow the TIFF default regardless of the value in this field. It is preferable that readers be able to support both centred and co-sited positioning.

en: The reference black point value and reference white point value. No defaults are given in TIFF, but the values below are given as defaults here. The color space is declared in a color space information tag, with the default being the value that gives the optimal image characteristics Interoperability these conditions.
en_CA: The reference black point value and reference white point value. No defaults are given in TIFF, but the values below are given as defaults here. The colour space is declared in a colour space information tag, with the default being the value that gives the optimal image characteristics Interoperability these conditions.

en: Indicates the color filter array (CFA) geometric pattern of the image sensor when a one-chip color area sensor is used. It does not apply to all sensing methods.
en_CA: Indicates the colour filter array (CFA) geometric pattern of the image sensor when a one-chip colour area sensor is used. It does not apply to all sensing methods.

en: The distance to the subject, given in meters.
en_CA: The distance to the subject, given in metres.

en: Color Space
en_CA: Colour Space

en: The color space information tag is always recorded as the color space specifier. Normally sRGB (=1) is used to define the color space based on the PC monitor conditions and environment. If a color space other than sRGB is used, Uncalibrated (=FFFF.H) is set. Image data recorded as Uncalibrated can be treated as sRGB when it is converted to FlashPix.
en_CA: The colour space information tag is always recorded as the colour space specifier. Normally sRGB (=1) is used to define the colour space based on the PC monitor conditions and environment. If a colour space other than sRGB is used, Uncalibrated (=FFFF.H) is set. Image data recorded as Uncalibrated can be treated as sRGB when it is converted to FlashPix.

en: Indicates the location of the main subject in the scene. The value of this tag represents the pixel at the center of the main subject relative to the left edge, prior to rotation processing as per the <Rotation> tag. The first value indicates the X column number and the second indicates the Y row number.
en_CA: Indicates the location of the main subject in the scene. The value of this tag represents the pixel at the centre of the main subject relative to the left edge, prior to rotation processing as per the <Rotation> tag. The first value indicates the X column number and the second indicates the Y row number.

en: FinePix Color
en_CA: FinePix Colour

en: Color
en_CA: Colour

en: %2.2f meters
en_CA: %2.2f metres

en: AF position: center
en_CA: AF position: centre

en: Color Mode (?)
en_CA: Colour Mode (?)

en: Color Mode
en_CA: Colour Mode

en: Color Matrix
en_CA: Colour Matrix

en: Color Matrix Number
en_CA: Colour Matrix Number

en: Color Control
en_CA: Colour Control

en: Light Value Center
en_CA: Light Value Centre

en: Color Adjustment Mode
en_CA: Colour Adjustment Mode

en: 2560x1920 or 2304x1728
en_CA: 2560×1920 or 2304×1728

en: 2304x1728 or 2592x1944
en_CA: 2304×1728 or 2592×1944

en: 2816x2212 or 2816x2112
en_CA: 2816×2212 or 2816×2112

en: Fixed center
en_CA: Fixed centre

en: Top-center
en_CA: Top-centre

en: Bottom-center
en_CA: Bottom-centre

en: 3008x2008 or 3040x2024
en_CA: 3008×2008 or 3040×2024

en: Colors
en_CA: Colours

en: Distance of photographed object in millimeters.
en_CA: Distance of photographed object in millimetres.
