libexif - en to en_GB translation catalogue (70 entries)

en: Movie
en_GB: Film

en: Grayscale
en_GB: Greyscale

en: My colors
en_GB: My colours

en: Color accent
en_GB: Colour accent

en: Color swap
en_GB: Colour swap

en: Center-weighted average
en_GB: Centre-weighted average

en: Center
en_GB: Centre

en: Program
en_GB: Programme

en: My color data
en_GB: My colour data

en: Center-right
en_GB: Centre-right

en: Left-center
en_GB: Left-centre

en: Color Information
en_GB: Colour Information

en: Image Stabilization
en_GB: Image Stabilisation

en: Color Tone
en_GB: Colour Tone

en: When loading and resaving Exif data, save the maker note unmodified. Be aware that the maker note can get corrupted.
en_GB: When loading and resaving Exif data, save the maker note unmodified. Be aware that the maker note can be corrupted.

en: One-chip color area sensor
en_GB: One-chip colour area sensor

en: Two-chip color area sensor
en_GB: Two-chip colour area sensor

en: Three-chip color area sensor
en_GB: Three-chip colour area sensor

en: Color sequential area sensor
en_GB: Colour sequential area sensor

en: Color sequential linear sensor
en_GB: Colour sequential linear sensor

en: Centered
en_GB: Centred

en: Center-weight
en_GB: Centre-weight

en: Centimeter
en_GB: Centimetre

en: Normal program
en_GB: Normal programme

en: Creative program (biased toward depth of field)
en_GB: Creative programme (biased towards depth of field)

en: Creative program (biased toward fast shutter speed)
en_GB: Creative programme (biased towards fast shutter speed)

en: Indicates the altitude used as the reference altitude. If the reference is sea level and the altitude is above sea level, 0 is given. If the altitude is below sea level, a value of 1 is given and the altitude is indicated as an absolute value in the GPSAltitude tag. The reference unit is meters. Note that this tag is BYTE type, unlike other reference tags.
en_GB: Indicates the altitude used as the reference altitude. If the reference is sea level and the altitude is above sea level, 0 is given. If the altitude is below sea level, a value of 1 is given and the altitude is indicated as an absolute value in the GPSAltitude tag. The reference unit is metres. Note that this tag is BYTE type, unlike other reference tags.

en: Indicates the altitude based on the reference in GPSAltitudeRef. Altitude is expressed as one RATIONAL value. The reference unit is meters.
en_GB: Indicates the altitude based on the reference in GPSAltitudeRef. Altitude is expressed as one RATIONAL value. The reference unit is metres.

en: Indicates the unit used to express the distance to the destination point. 'K', 'M' and 'N' represent kilometers, miles and nautical miles.
en_GB: Indicates the unit used to express the distance to the destination point. 'K', 'M' and 'N' represent kilometres, miles and nautical miles.

en: The manufacturer of the recording equipment. This is the manufacturer of the DSC, scanner, video digitizer or other equipment that generated the image. When the field is left blank, it is treated as unknown.
en_GB: The manufacturer of the recording equipment. This is the manufacturer of the DSC, scanner, video digitiser or other equipment that generated the image. When the field is left blank, it is treated as unknown.

en: The model name or model number of the equipment. This is the model name or number of the DSC, scanner, video digitizer or other equipment that generated the image. When the field is left blank, it is treated as unknown.
en_GB: The model name or model number of the equipment. This is the model name or number of the DSC, scanner, video digitiser or other equipment that generated the image. When the field is left blank, it is treated as unknown.

en: A transfer function for the image, described in tabular style. Normally this tag is not necessary, since color space is specified in the color space information tag (<ColorSpace>).
en_GB: A transfer function for the image, described in tabular style. Normally this tag is not necessary, since colour space is specified in the colour space information tag (<ColorSpace>).

en: The chromaticity of the white point of the image. Normally this tag is not necessary, since color space is specified in the color space information tag (<ColorSpace>).
en_GB: The chromaticity of the white point of the image. Normally this tag is not necessary, since colour space is specified in the colour space information tag (<ColorSpace>).

en: The chromaticity of the three primary colors of the image. Normally this tag is not necessary, since color space is specified in the color space information tag (<ColorSpace>).
en_GB: The chromaticity of the three primary colours of the image. Normally this tag is not necessary, since colour space is specified in the colour space information tag (<ColorSpace>).

en: The matrix coefficients for transformation from RGB to YCbCr image data. No default is given in TIFF; but here the value given in "Color Space Guidelines", is used as the default. The color space is declared in a color space information tag, with the default being the value that gives the optimal image characteristics Interoperability this condition.
en_GB: The matrix coefficients for transformation from RGB to YCbCr image data. No default is given in TIFF; but here the value given in "Colour Space Guidelines", is used as the default. The colour space is declared in a colour space information tag, with the default being the value that gives the optimal image characteristics Interoperability this condition.

en: The position of chrominance components in relation to the luminance component. This field is designated only for JPEG compressed data or uncompressed YCbCr data. The TIFF default is 1 (centered); but when Y:Cb:Cr = 4:2:2 it is recommended in this standard that 2 (co-sited) be used to record data, in order to improve the image quality when viewed on TV systems. When this field does not exist, the reader shall assume the TIFF default. In the case of Y:Cb:Cr = 4:2:0, the TIFF default (centered) is recommended. If the reader does not have the capability of supporting both kinds of <YCbCrPositioning>, it shall follow the TIFF default regardless of the value in this field. It is preferable that readers be able to support both centered and co-sited positioning.
en_GB: The position of chrominance components in relation to the luminance component. This field is designated only for JPEG compressed data or uncompressed YCbCr data. The TIFF default is 1 (centred); but when Y:Cb:Cr = 4:2:2 it is recommended in this standard that 2 (co-sited) be used to record data, in order to improve the image quality when viewed on TV systems. When this field does not exist, the reader shall assume the TIFF default. In the case of Y:Cb:Cr = 4:2:0, the TIFF default (centred) is recommended. If the reader does not have the capability of supporting both kinds of <YCbCrPositioning>, it shall follow the TIFF default regardless of the value in this field. It is preferable that readers be able to support both centred and co-sited positioning.

en: The reference black point value and reference white point value. No defaults are given in TIFF, but the values below are given as defaults here. The color space is declared in a color space information tag, with the default being the value that gives the optimal image characteristics Interoperability these conditions.
en_GB: The reference black point value and reference white point value. No defaults are given in TIFF, but the values below are given as defaults here. The colour space is declared in a colour space information tag, with the default being the value that gives the optimal image characteristics Interoperability these conditions.

en: Indicates the color filter array (CFA) geometric pattern of the image sensor when a one-chip color area sensor is used. It does not apply to all sensing methods.
en_GB: Indicates the colour filter array (CFA) geometric pattern of the image sensor when a one-chip colour area sensor is used. It does not apply to all sensing methods.

en: Copyright information. In this standard the tag is used to indicate both the photographer and editor copyrights. It is the copyright notice of the person or organization claiming rights to the image. The Interoperability copyright statement including date and rights should be written in this field; e.g., "Copyright, John Smith, 19xx. All rights reserved.". In this standard the field records both the photographer and editor copyrights, with each recorded in a separate part of the statement. When there is a clear distinction between the photographer and editor copyrights, these are to be written in the order of photographer followed by editor copyright, separated by NULL (in this case, since the statement also ends with a NULL, there are two NULL codes) (see example 1). When only the photographer is given, it is terminated by one NULL code (see example 2). When only the editor copyright is given, the photographer copyright part consists of one space followed by a terminating NULL code, then the editor copyright is given (see example 3). When the field is left blank, it is treated as unknown.
en_GB: Copyright information. In this standard the tag is used to indicate both the photographer and editor copyrights. It is the copyright notice of the person or organisation claiming rights to the image. The Interoperability copyright statement including date and rights should be written in this field; e.g., "Copyright, John Smith, 19xx. All rights reserved.". In this standard the field records both the photographer and editor copyrights, with each recorded in a separate part of the statement. When there is a clear distinction between the photographer and editor copyrights, these are to be written in the order of photographer followed by editor copyright, separated by NULL (in this case, since the statement also ends with a NULL, there are two NULL codes) (see example 1). When only the photographer is given, it is terminated by one NULL code (see example 2). When only the editor copyright is given, the photographer copyright part consists of one space followed by a terminating NULL code, then the editor copyright is given (see example 3). When the field is left blank, it is treated as unknown.

en: The class of the program used by the camera to set exposure when the picture is taken.
en_GB: The class of the programme used by the camera to set exposure when the picture is taken.

en: Date and Time (Digitized)
en_GB: Date and Time (Digitised)

en: The distance to the subject, given in meters.
en_GB: The distance to the subject, given in metres.

en: Sub-second Time (Digitized)
en_GB: Sub-second Time (Digitised)

en: Color Space
en_GB: Colour Space

en: The color space information tag is always recorded as the color space specifier. Normally sRGB (=1) is used to define the color space based on the PC monitor conditions and environment. If a color space other than sRGB is used, Uncalibrated (=FFFF.H) is set. Image data recorded as Uncalibrated can be treated as sRGB when it is converted to FlashPix.
en_GB: The colour space information tag is always recorded as the colour space specifier. Normally sRGB (=1) is used to define the colour space based on the PC monitor conditions and environment. If a colour space other than sRGB is used, Uncalibrated (=FFFF.H) is set. Image data recorded as Uncalibrated can be treated as sRGB when it is converted to FlashPix.

en: Indicates the location of the main subject in the scene. The value of this tag represents the pixel at the center of the main subject relative to the left edge, prior to rotation processing as per the <Rotation> tag. The first value indicates the X column number and the second indicates the Y row number.
en_GB: Indicates the location of the main subject in the scene. The value of this tag represents the pixel at the centre of the main subject relative to the left edge, prior to rotation processing as per the <Rotation> tag. The first value indicates the X column number and the second indicates the Y row number.

en: This tag indicates the use of special processing on image data, such as rendering geared to output. When special processing is performed, the reader is expected to disable or minimize any further processing.
en_GB: This tag indicates the use of special processing on image data, such as rendering geared to output. When special processing is performed, the reader is expected to disable or minimise any further processing.

en: This tag reserves space that can be reclaimed later when additional metadata are added. New metadata can be written in place by replacing this tag with a smaller data element and using the reclaimed space to store the new or expanded metadata tags.
en_GB: This tag reserves space that can be reclaimed later when additional metadata are added. New metadata can be written in place, by replacing this tag with a smaller data element and using the reclaimed space to store the new or expanded metadata tags.

en: Program AE
en_GB: Programme AE

en: FinePix Color
en_GB: FinePix Colour

en: 2 Mpixel basic
en_GB: 2M pixel basic

en: 2 Mpixel normal
en_GB: 2M pixel normal

en: 2 Mpixel fine
en_GB: 2M pixel fine

en: Color
en_GB: Colour

en: %2.2f meters
en_GB: %2.2f metres

en: AF position: center
en_GB: AF position: centre

en: Color Mode (?)
en_GB: Colour Mode (?)

en: Adapter
en_GB: Adaptor

en: Color Mode
en_GB: Colour Mode

en: Optimize Image
en_GB: Optimise Image

en: Color Matrix
en_GB: Colour Matrix

en: Color Matrix Number
en_GB: Colour Matrix Number

en: Color Control
en_GB: Colour Control

en: Light Value Center
en_GB: Light Value Centre

en: Color Adjustment Mode
en_GB: Colour Adjustment Mode

en: Synchro sound record
en_GB: Sync sound record

en: Fixed center
en_GB: Fixed centre

en: Top-center
en_GB: Top-centre

en: Bottom-center
en_GB: Bottom-centre

en: Colors
en_GB: Colours
