debian-installer - en to zh_CN translation catalogue (118 entries)

note: Type: boolean Description IPv6 :sl1:
en: Auto-configure networking?
zh_CN: 自动配置网络吗？

note: Type: boolean Description IPv6 :sl1:
en: Networking can be configured either by entering all the information manually, or by using DHCP (or a variety of IPv6-specific methods) to detect network settings automatically. If you choose to use autoconfiguration and the installer is unable to get a working configuration from the network, you will be given the opportunity to configure the network manually.
zh_CN: 网络可以通过手动输入全部信息进行配置，也可以使用 DHCP (或者一系列 IPv6 专用的方法) 来进行配置。如果您选择了自动配置，但安装程序无法从网络中获得有效的网络配置，您仍然可以手动输入。

note: Type: string Description :sl1:
en: Domain name:
zh_CN: 域名：

note: Type: string Description :sl1:
en: The domain name is the part of your Internet address to the right of your host name.  It is often something that ends in .com, .net, .edu, or .org.  If you are setting up a home network, you can make something up, but make sure you use the same domain name on all your computers.
zh_CN: 域名是您的互联网地址的一部分，附加在主机名之后。它通常是以 .com、.net、.edu 或 .org 结尾。如果您正在设置一个家庭网络，您可以随意写一个，但是要确保您所有计算机的域名都是一样的。

note: Type: string Description :sl1:
en: Name server addresses:
zh_CN: 域名服务器地址：

note: Type: string Description :sl1:
en: The name servers are used to look up host names on the network. Please enter the IP addresses (not host names) of up to 3 name servers, separated by spaces. Do not use commas. The first name server in the list will be the first to be queried. If you don't want to use any name server, just leave this field blank.
zh_CN: 域名服务器用于在网络中查找主机名。请输入至多三个域名服务器的 IP 地址 (不是主机名)，以空格分隔，不要使用逗号。将首先查询列表中的第一个域名服务器。如果您不想使用任何域名服务器，请将此栏置空。

note: Type: select Description :sl1:
en: Primary network interface:
zh_CN: 主网络接口：

note: Type: select Description :sl1:
en: Your system has multiple network interfaces. Choose the one to use as the primary network interface during the installation. If possible, the first connected network interface found has been selected.
zh_CN: 您的系统有多个网络接口，请选择其中一个作为安装过程中使用的主网络接口。如果可能的话，安装程序已经选中了第一个已连接的网络接口。

note: Type: string Description :sl2: :sl1:
en: Wireless ESSID for ${iface}:
zh_CN: ${iface} 的无线 ESSID：

note: Type: string Description :sl2:
en: ${iface} is a wireless network interface. Please enter the name (the ESSID) of the wireless network you would like ${iface} to use. If you would like to use any available network, leave this field blank.
zh_CN: ${iface} 是一个无线网络接口。请输入 ${iface} 将要使用的无线网络的名称 (ESSID)。如果您希望使用任意可用的网络，请将此处置空。

note: Type: string Description :sl1:
en: Attempting to find an available wireless network failed.
zh_CN: 尝试寻找可用的无线网络失败。

note: Type: string Description :sl1:
en: ${iface} is a wireless network interface. Please enter the name (the ESSID) of the wireless network you would like ${iface} to use. To connect to any available network, leave this field blank.
zh_CN: ${iface} 是一个无线网络接口。请输入 ${iface} 将要使用的无线网络的名称 (ESSID)。如果您希望使用任何可用的网络，请将此处置空。

note: Type: select Choices :sl2:
en: WEP/Open Network
zh_CN: WEP/开放网络

note: Type: select Description :sl2:
en: Wireless network type for ${iface}:
zh_CN: ${iface} 的无线网络类型：

note: Type: select Description :sl2:
en: Choose WEP/Open if the network is open or secured with WEP. Choose WPA/WPA2 if the network is protected with WPA/WPA2 PSK (Pre-Shared Key).
zh_CN: 如果网络是开放的或者使用 WEP 加密，请选择 WEP/开放。如果是由 WPA/WPA2 PSK (预共享密钥) 保护，请选择 WPA/WPA2。

note: Type: string Description :sl2:
en: WEP key for wireless device ${iface}:
zh_CN: 无线网络设备 ${iface} 的 WEP 密钥：

note: Type: string Description :sl2:
en: If applicable, please enter the WEP security key for the wireless device ${iface}. There are two ways to do this:
zh_CN: 如果需要，请为无线网络设备 ${iface} 设备输入 WEP 安全密钥。输入方式有以下两种：

note: Type: string Description :sl2:
en: If your WEP key is in the format 'nnnn-nnnn-nn', 'nn:nn:nn:nn:nn:nn:nn:nn', or 'nnnnnnnn', where n is a number, just enter it as it is into this field.
zh_CN: 如果您的 WEP 密钥的格式是 "nnnn-nnnn-nn"、"nn:nn:nn:nn:nn:nn:nn:nn" 或 "nnnnnnnn" (其中的 n 是数字)，请将它直接填写到输入框中。

note: Type: string Description :sl2:
en: If your WEP key is in the format of a passphrase, prefix it with 's:' (without quotes).
zh_CN: 如果您的 WEP 密钥的格式是一个密码字符串，请在前面加上 "s:" (不包括引号)。

note: Type: string Description :sl2:
en: Of course, if there is no WEP key for your wireless network, leave this field blank.
zh_CN: 当然，如果您的无线网络没有 WEP 密钥，请将此栏置空。

note: Type: error Description :sl2:
en: Invalid WEP key
zh_CN: 无效的 WEP 密钥

note: Type: error Description :sl2:
en: The WEP key '${wepkey}' is invalid. Please refer to the instructions on the next screen carefully on how to enter your WEP key correctly, and try again.
zh_CN: 此 WEP 密钥 "${wepkey}" 是无效的。请仔细阅读下一屏的指导信息，以了解如何正确地输入您的 WEP 密钥，并重试。

note: Type: error Description :sl2:
en: Invalid passphrase
zh_CN: 无效的密码

note: Type: error Description :sl2:
en: The WPA/WPA2 PSK passphrase was either too long (more than 64 characters) or too short (less than 8 characters).
zh_CN: WPA/WPA2 PSK 密码过长 (多于 64 个字符) 或过短 (少于 8 个字符)。

note: Type: string Description :sl2:
en: WPA/WPA2 passphrase for wireless device ${iface}:
zh_CN: 无线网络设备 ${iface} 的 WPA/WPA2 密码：

note: Type: string Description :sl2:
en: Enter the passphrase for WPA/WPA2 PSK authentication. This should be the passphrase defined for the wireless network you are trying to use.
zh_CN: 输入用于 WPA/WPA2 PSK 认证的密码。这应该是您尝试连接的无线网络中设置的密码。

note: Type: error Description :sl2:
en: Invalid ESSID
zh_CN: 无效的 ESSID

note: Type: error Description :sl2:
en: The ESSID "${essid}" is invalid. ESSIDs may only be up to ${max_essid_len} characters, but may contain all kinds of characters.
zh_CN: 此 ESSID "${essid}" 无效。ESSID 最大长度为 ${max_essid_len} 个字符，但可以包含所有类型的字符。

note: Type: text Description :sl2:
en: Attempting to exchange keys with the access point...
zh_CN: 正在尝试和接入点交换密钥...

note: Type: text Description :sl2: :sl1:
en: This may take some time.
zh_CN: 这将花费一些时间。

note: Type: text Description :sl2:
en: WPA/WPA2 connection succeeded
zh_CN: WPA/WPA2 连接成功

note: Type: note Description :sl2:
en: Failure of key exchange and association
zh_CN: 密钥交换与协商失败

note: Type: note Description :sl2:
en: The exchange of keys and association with the access point failed. Please check the WPA/WPA2 parameters you provided.
zh_CN: 和接入点交换密钥与协商失败。请检查您提供的 WPA/WPA2 参数。

note: Type: string Description :sl1:
en: Hostname:
zh_CN: 主机名：

note: Type: string Description :sl1:
en: Please enter the hostname for this system.
zh_CN: 请输入此系统的主机名。

note: Type: string Description :sl1:
en: The hostname is a single word that identifies your system to the network. If you don't know what your hostname should be, consult your network administrator. If you are setting up your own home network, you can make something up here.
zh_CN: 主机名是在网络中识别您的系统的一个单词。如果您不知道主机名是什么，请询问网络管理员。如果您正在设置家庭网络，那么可以随意写个名字。

note: Type: error Description :sl2:
en: Invalid hostname
zh_CN: 无效的主机名

note: Type: error Description :sl2:
en: The name "${hostname}" is invalid.
zh_CN: 名称 "${hostname}" 无效。

note: Type: error Description :sl2:
en: A valid hostname may contain only the numbers 0-9, upper and lowercase letters (A-Z and a-z), and the minus sign. It must be at most ${maxhostnamelen} characters long, and may not begin or end with a minus sign.
zh_CN: 正确的主机名应当只包含数字 0-9、大小写字母 (A-Z 和 a-z) 和减号，最长不能超过 ${maxhostnamelen} 个字符，且不能以减号开始或结束。

note: Type: error Description :sl2:
en: Error
zh_CN: 错误

note: Type: error Description :sl2:
en: An error occurred and the network configuration process has been aborted. You may retry it from the installation main menu.
zh_CN: 发生错误，网络配置过程已中止。您可以从安装程序主菜单中重试。

note: Type: error Description :sl2:
en: No network interfaces detected
zh_CN: 未探测到网络接口

note: Type: error Description :sl2:
en: No network interfaces were found. The installation system was unable to find a network device.
zh_CN: 没有检测到网络接口。安装程序无法找到网络设备。

note: Type: error Description :sl2:
en: You may need to load a specific module for your network card, if you have one. For this, go back to the network hardware detection step.
zh_CN: 如果您的网卡使用特定的模块，您可能还需要加载它。要完成此任务，请返回到网络硬件探测步骤。

note: Type: note Description A "kill switch" is a physical switch found on some network cards that disables the card. :sl2:
en: Kill switch enabled on ${iface}
zh_CN: ${iface} 上的禁用开关 (kill switch) 已开启

note: Type: note Description A "kill switch" is a physical switch found on some network cards that disables the card. :sl2:
en: ${iface} appears to have been disabled by means of a physical "kill switch". If you intend to use this interface, please switch it on before continuing.
zh_CN: ${iface} 似乎被物理的 "禁用开关" 所禁用。如果您想要使用此接口，请在继续安装前开启它。

note: Type: select Choices :sl2: Note to translators : Please keep your translations of each choice below the 65 columns limit (which means 65 characters for most languages) Choices MUST be separated by commas You MUST use standard commas not special commas for your language You MUST NOT use commas inside
en: Infrastructure (Managed) network
zh_CN: Infrastructure (Managed) 网络

note: Type: select Choices :sl2: Note to translators : Please keep your translations of each choice below the 65 columns limit (which means 65 characters for most languages) Choices MUST be separated by commas You MUST use standard commas not special commas for your language You MUST NOT use commas inside
en: Ad-hoc network (Peer to peer)
zh_CN: Ad-hoc 网络 (点对点)

note: Type: select Description :sl2:
en: Type of wireless network:
zh_CN: 无线网络的类型：

note: Type: select Description :sl2:
en: Wireless networks are either managed or ad-hoc. If you use a real access point of some sort, your network is Managed. If another computer is your 'access point', then your network may be Ad-hoc.
zh_CN: 无线网络可以是受管理 (managed) 或自组织 (ad-hoc) 两种类型。如果您使用了某种实体装置作为接入点 (access point)，您的网络就是 Managed。如果是以另一台计算机作为您的 "接入点"，那么您的网络就应该是 Ad-hoc。

note: Type: text Description :sl2:
en: Wireless network configuration
zh_CN: 无线网络设置

note: Type: text Description :sl2:
en: Searching for wireless access points...
zh_CN: 正在搜索无线网络接入点...

note: Type: text Description :sl2:
en: Detecting link on ${interface}; please wait...
zh_CN: 正在探测 ${interface} 上的连接，请稍候...

note: Type: text Description :sl2:
en: <none>
zh_CN: <无>

note: Type: text Description :sl2:
en: Wireless ethernet (802.11x)
zh_CN: 无线局域网 (802.11x)

note: Type: text Description :sl2:
en: wireless
zh_CN: 无线网络

note: Type: text Description :sl2:
en: Ethernet
zh_CN: 以太网

note: Type: text Description :sl2:
en: Token Ring
zh_CN: 令牌环

note: Type: text Description :sl2:
en: USB net
zh_CN: USB 网络

note: Type: text Description :sl2:
en: Serial-line IP
zh_CN: 串行 IP

note: Type: text Description :sl2:
en: Parallel-port IP
zh_CN: 并口 IP

note: Type: text Description :sl2:
en: Point-to-Point Protocol
zh_CN: 点对点协议

note: Type: text Description :sl2:
en: ISDN Point-to-Point Protocol
zh_CN: ISDN 点对点协议

note: Type: text Description :sl2:
en: Unknown interface
zh_CN: 未知接口

note: Type: text Description base-installer progress bar item :sl1:
en: Storing network settings...
zh_CN: 正在保存网络设置...

note: Type: text Description Item in the main menu to select this package Translators: keep below 55 columns :sl1:
en: Configure the network
zh_CN: 配置网络

note: Type: string Description :sl3:
en: Waiting time (in seconds) for link detection:
zh_CN: 连接探测时的等待时间 (秒)：

note: Type: string Description :sl3:
en: Please enter the maximum time you would like to wait for network link detection.
zh_CN: 请输入网络连接探测时的最大等待时间 (秒)。

note: Type: error Description :sl3:
en: Invalid network link detection waiting time
zh_CN: 网络连接探测等待时间无效

note: Type: error Description :sl3:
en: The value you have provided is not valid. The maximum waiting time (in seconds) for network link detection must be a positive integer.
zh_CN: 您提供的值无效。网络连接探测时的最大等待时间 (秒) 必须为正整数。

note: Type: select Choices Translators: please do not translate the variable essid_list :sl1:
en: ${essid_list} Enter ESSID manually
zh_CN: ${essid_list} 手动输入 ESSID

note: Type: select Description :sl1:
en: Wireless network:
zh_CN: 无线网络：

note: Type: select Description :sl1:
en: Select the wireless network to use during the installation process.
zh_CN: 选择安装过程中使用的无线网络。

note: Type: string Description :sl1:
en: DHCP hostname:
zh_CN: DHCP 主机名：

note: Type: string Description :sl1:
en: You may need to supply a DHCP host name. If you are using a cable modem, you might need to specify an account number here.
zh_CN: 您需要提供一个 DHCP 主机名。如果您使用的是同轴电缆调制解调器，可能还需要指定一个帐号。

note: Type: string Description :sl1:
en: Most other users can just leave this blank.
zh_CN: 大多数其他用户可以将此栏置空。

note: Type: text Description :sl1:
en: Configuring the network with DHCP
zh_CN: 正在使用 DHCP 配置网络

note: Type: text Description :sl1:
en: Network autoconfiguration has succeeded
zh_CN: 网络自动配置成功

note: Type: error Description :sl2:
en: No DHCP client found
zh_CN: 没有找到 DHCP 客户端程序

note: Type: error Description :sl2:
en: No DHCP client was found. Please make sure, that a DHCP installer component is installed.
zh_CN: 未找到 DHCP 客户端。请再次确认安装程序的 DHCP 组件是否存在。

note: Type: error Description :sl2:
en: The DHCP configuration process has been aborted.
zh_CN: DHCP 配置过程已被中止。

note: Type: select Choices :sl1: Note to translators : Please keep your translation below a 65 columns limit (which means 65 characters in single-byte languages)
en: Retry network autoconfiguration
zh_CN: 重新尝试网络自动配置

note: Type: select Choices :sl1: Note to translators : Please keep your translation below a 65 columns limit (which means 65 characters in single-byte languages)
en: Retry network autoconfiguration with a DHCP hostname
zh_CN: 使用 DHCP 主机名重新尝试网络自动配置

note: Type: select Choices :sl1: Note to translators : Please keep your translation below a 65 columns limit (which means 65 characters in single-byte languages)
en: Configure network manually
zh_CN: 手动配置网络

note: Type: select Choices :sl1: Note to translators : Please keep your translation below a 65 columns limit (which means 65 characters in single-byte languages)
en: Do not configure the network at this time
zh_CN: 暂时不配置网络

note: Type: select Description :sl1:
en: Network configuration method:
zh_CN: 网络配置方式：

note: Type: select Description :sl1:
en: From here you can choose to retry DHCP network autoconfiguration (which may succeed if your DHCP server takes a long time to respond) or to configure the network manually. Some DHCP servers require a DHCP hostname to be sent by the client, so you can also choose to retry DHCP network autoconfiguration with a hostname that you provide.
zh_CN: 现在，您可以选择重新尝试 DHCP 网络自动配置 (如果您的 DHCP 服务器响应延时很长，重新配置一遍可能就会成功) 或者手动配置网络。另外，某些 DHCP 服务器要求客户端发送 DHCP 主机名，因此您可以在重试 DHCP 网络自动配置时提供一个主机名。

note: Type: note Description :sl1:
en: Network autoconfiguration failed
zh_CN: 网络自动配置失败

note: Type: note Description :sl1:
en: Your network is probably not using the DHCP protocol. Alternatively, the DHCP server may be slow or some network hardware is not working properly.
zh_CN: 您的网络可能并未使用 DHCP 协议，也有可能是 DHCP 服务器速度过于缓慢或者某些网络设备未能正常工作。

note: Type: boolean Description :sl2:
en: Continue without a default route?
zh_CN: 无默认路由，继续安装吗？

note: Type: boolean Description :sl2:
en: The network autoconfiguration was successful. However, no default route was set: the system does not know how to communicate with hosts on the Internet. This will make it impossible to continue with the installation unless you have the first image from a set of installation media, a 'Netinst' image, or packages available on the local network.
zh_CN: 网络自动配置成功。但是由于未设置默认路由，系统将无法连接互联网上的主机。除非您拥有一组安装介质中的第一个镜像、"Netinst" 镜像或在本地网络上存有所需的软件包，否则将无法继续进行安装。

note: Type: boolean Description :sl2:
en: If you are unsure, you should not continue without a default route: contact your local network administrator about this problem.
zh_CN: 如果您有疑问，请不要在未设定默认路由的情况下继续安装：请向网络管理员咨询相关问题。

note: Type: text Description :sl1:
en: Reconfigure the wireless network
zh_CN: 重新配置无线网络

note: Type: text Description IPv6 :sl2:
en: Attempting IPv6 autoconfiguration...
zh_CN: 正在尝试 IPv6 自动配置...

note: Type: text Description IPv6 :sl2:
en: Waiting for link-local address...
zh_CN: 正在等待 link-local 地址...

note: Type: text Description :sl2:
en: Configuring the network with DHCPv6
zh_CN: 使用 DHCPv6 来配置网络

note: Type: string Description IPv6 :sl1:
en: IP address:
zh_CN: IP 地址：

note: Type: string Description IPv6 :sl1:
en: The IP address is unique to your computer and may be:
zh_CN: IP 地址与您的计算机相关联，其可能是：

note: Type: string Description IPv6 :sl1:
en:  * four numbers separated by periods (IPv4);
     * blocks of hexadecimal characters separated by colons (IPv6).
zh_CN:  * 句点分隔的四个数字 (IPv4);
     * 冒号分隔的十六进制字符 (IPv6)。

note: Type: string Description IPv6 :sl1:
en: You can also optionally append a CIDR netmask (such as "/24").
zh_CN: 您也可以在后面附加一个 CIDR 网络掩码 (如 "/24")。

note: Type: string Description IPv6 :sl1:
en: If you don't know what to use here, consult your network administrator.
zh_CN: 如果您不知道应该输入什么内容，请咨询网络管理员。

note: Type: error Description IPv6 :sl2:
en: Malformed IP address
zh_CN: IP 地址格式有误

note: Type: error Description IPv6 :sl2:
en: The value you provided is not a usable IPv4 or IPv6 address. Please consult your network administrator and try again.
zh_CN: 您提供的值不是可用的 IPv4 或 IPv6 地址。请咨询网络管理员并重试。

note: Type: string Description :sl2:
en: Point-to-point address:
zh_CN: 点对点地址：

note: Type: string Description :sl2:
en: The point-to-point address is used to determine the other endpoint of the point to point network.  Consult your network administrator if you do not know the value.  The point-to-point address should be entered as four numbers separated by periods.
zh_CN: 点对点地址用来确定点对点网络的另一端。如果您不知道地址，请咨询网络管理员。点对点地址应该是以用句点分隔的四个数字组成。

note: Type: string Description :sl1:
en: Netmask:
zh_CN: 网络掩码：

note: Type: string Description :sl1:
en: The netmask is used to determine which machines are local to your network.  Consult your network administrator if you do not know the value.  The netmask should be entered as four numbers separated by periods.
zh_CN: 网络掩码用于确定哪些机器位于您的网络中。如果您不知道掩码值，请咨询网络管理员。掩码应该由用句点分隔的四个数字组成。

note: Type: string Description :sl1:
en: Gateway:
zh_CN: 网关：

note: Type: string Description :sl1:
en: The gateway is an IP address (four numbers separated by periods) that indicates the gateway router, also known as the default router.  All traffic that goes outside your LAN (for instance, to the Internet) is sent through this router.  In rare circumstances, you may have no router; in that case, you can leave this blank.  If you don't know the proper answer to this question, consult your network administrator.
zh_CN: 网关是用于指示网关路由 (也叫做默认路由) 的 IP 地址 (用句点分隔的四个数字)。所有与局域网外的通信 (例如，对互联网的访问) 都要经过它。在某些罕见情况下，您可能并不使用路由；这种情况下，置空就可以了。如果不知道应该回答什么，请咨询网络管理员。

note: Type: error Description :sl2:
en: Unreachable gateway
zh_CN: 网关不可达

note: Type: error Description :sl2:
en: The gateway address you entered is unreachable.
zh_CN: 您输入的网关地址不可达。

note: Type: error Description :sl2:
en: You may have made an error entering your IP address, netmask and/or gateway.
zh_CN: 也许您输入的 IP 地址、网络掩码和/或网关有误。

note: Type: error Description IPv6 :sl3:
en: IPv6 unsupported on point-to-point links
zh_CN: 点对点链接不支持 IPv6

note: Type: error Description IPv6 :sl3:
en: IPv6 addresses cannot be configured on point-to-point links.  Please use an IPv4 address, or go back and select a different network interface.
zh_CN: 无法在点对点链接上配置 IPv6 地址。请使用 IPv4 地址，或者返回并选择另一个网络接口。

note: Type: boolean Description :sl1:
en: Is this information correct?
zh_CN: 这些信息正确吗？

note: Type: boolean Description :sl1:
en: Currently configured network parameters:
zh_CN: 当前配置的网络参数：

note: Type: boolean Description :sl1:
en:  interface     = ${interface}
     ipaddress     = ${ipaddress}
     netmask       = ${netmask}
     gateway       = ${gateway}
     pointopoint   = ${pointopoint}
     nameservers   = ${nameservers}
zh_CN:  接口          = ${interface}
     IP 地址       = ${ipaddress}
     网络掩码      = ${netmask}
     网关          = ${gateway}
     点对点        = ${pointopoint}
     域名服务器    = ${nameservers}

note: Type: text Description Item in the main menu to select this package Translators: keep below 55 columns :sl1:
en: Configure a network using static addressing
zh_CN: 使用静态地址配置网络
