postfix - en to da translation catalogue (40 entries)

note: Type: boolean Description
en: Ignore incorrect hostname entry?
da: Ignorer ukorrekt værtsnavnspunkt?

note: Type: boolean Description
en: The string '${enteredstring}' does not follow RFC 1035 and does not appear to be a valid IP address.
da: Strengen »${enteredstring}« følger ikke RFC 1035 og ligner ikke en gyldig IP-adresse.

note: Type: boolean Description
en: RFC 1035 states that 'each component must start with an alphanum, end with an alphanum and contain only alphanums and hyphens. Components must be separated by full stops.'
da: RFC 1035 angiver at »hver komponent skal starte med et bogstav/tal, slutte med et bogstav/tal og kun indeholde bogstaver/tal og bindestreger. Komponenter skal være adskilt af fulde stop.«

note: Type: select Choices Translators beware! the following six strings form a single Choices menu. - Every one of these strings has to fit in a standard 80 characters console, as the fancy screen setup takes up some space try to keep below ~71 characters. DO NOT USE commas (,) in Choices translations ot
en: No configuration
da: Ingen konfiguration

note: Type: select Choices Translators beware! the following six strings form a single Choices menu. - Every one of these strings has to fit in a standard 80 characters console, as the fancy screen setup takes up some space try to keep below ~71 characters. DO NOT USE commas (,) in Choices translations ot
en: Internet Site
da: Internetside

note: Type: select Choices Translators beware! the following six strings form a single Choices menu. - Every one of these strings has to fit in a standard 80 characters console, as the fancy screen setup takes up some space try to keep below ~71 characters. DO NOT USE commas (,) in Choices translations ot
en: Internet with smarthost
da: Internet med smarthost

note: Type: select Choices Translators beware! the following six strings form a single Choices menu. - Every one of these strings has to fit in a standard 80 characters console, as the fancy screen setup takes up some space try to keep below ~71 characters. DO NOT USE commas (,) in Choices translations ot
en: Satellite system
da: Satellitsystem

note: Type: select Choices Translators beware! the following six strings form a single Choices menu. - Every one of these strings has to fit in a standard 80 characters console, as the fancy screen setup takes up some space try to keep below ~71 characters. DO NOT USE commas (,) in Choices translations ot
en: Local only
da: Kun lokal

note: Type: select Description
en: Please select the mail server configuration type that best meets your needs.
da: Vælg venligst konfigurationstypen for postserveren som bedst passer til dine behov.

note: Type: error Description
en: Postfix not configured
da: Postfix ikke konfigureret

note: Type: error Description
en: You have chosen 'No Configuration'. Postfix will not be configured and will not be started by default. Please run 'dpkg-reconfigure postfix' at a later date, or configure it yourself by:
     - Editing /etc/postfix/main.cf to your liking;
     - Running 'service postfix start'.
da: Du har valgt »Ingen konfiguration«. Postfix vil ikke blive konfigureret og vil ikke startes som standard. Kør venligst »dpkg-reconfigure postfix« på et senere tidspunkt, eller konfigurer den selv ved at:
     - Redigere /etc/postfix/main.cf til det ønskede;
     - Afvikle »service postfix start«.

note: Type: string Description
en: System mail name:
da: Navn på systempost:

note: Type: string Description
en: This name will also be used by other programs. It should be the single, fully qualified domain name (FQDN).
da: Dette navn vil også blive brugt af andre programmer. Det skal være det enlige, fuldt kvalificeret domænenavn (FQDN).

note: Type: string Description Translators, please do NOT translate 'example.org' which is registered as a domain name reserved for documentation as per RFC 2606
en: Thus, if a mail address on the local host is foo@example.org, the correct value for this option would be example.org.
da: Derfor vil den korrekte værdi for eksemplet foo@example.org på den lokale vært være example.org.

note: Type: string Description
en: Other destinations to accept mail for (blank for none):
da: Andre destinationer der skal accepteres post for (tom for ingen):

note: Type: string Description
en: Please give a comma-separated list of domains for which this machine should consider itself the final destination. If this is a mail domain gateway, you probably want to include the top-level domain.
da: Angiv venligst en kommaadskilt liste af domæner hvor denne maskine skal anse sig selv for den endelige destination. Hvis dette er et postdomæneadgangspunkt, vil du sikkert inkludere topniveaudomænet.

note: Type: string Description
en: SMTP relay host (blank for none):
da: SMTP-relayvært (tom for ingen):

note: Type: string Description
en: Please specify a domain, host, host:port, [address] or [address]:port. Use the form [destination] to turn off MX lookups. Leave this blank for no relay host.
da: Angiv venligst et domæne, vært, vært:port, [adresse] eller [adresse]:port. Brug formen [destination] til at slukke MX-opslag. Efterlad tom for ingen relayvært.

note: Type: string Description
en: Do not specify more than one host.
da: Angiv ikke mere end en vært.

note: Type: boolean Description
en: Use procmail for local delivery?
da: Brug procmail for lokal levering?

note: Type: boolean Description
en: Please choose whether you want to use procmail to deliver local mail.
da: Vælg venligst hvorvidt du ønsker at bruge procmail til levering af lokal post.

note: Type: boolean Description
en: Note that if you use procmail to deliver mail system-wide, you should set up an alias that forwards mail for root to a real user.
da: Bemærk, at hvis du bruger procmail til at levere post i systemet, skal du opsætte et alias som videresender post for administrator (root) til en reel bruger.

note: Type: select Choices
en: all
da: alle

note: Type: select Description
en: Internet protocols to use:
da: Internetprotokol der skal bruges:

note: Type: select Description
en: By default, whichever Internet protocols are enabled on the system at installation time will be used. You may override this default with any of the following:
da: Som standard vil de internetprotokoller, som er aktiveret på systemet på installationstidspunktet blive brugt. Du kan tilsidesætte denne standard med en af de følgende:

note: Type: select Description
en:  all : use both IPv4 and IPv6 addresses;
     ipv6: listen only on IPv6 addresses;
     ipv4: listen only on IPv4 addresses.
da:  alle: Brug både IPv4- og IPv6-adresser;
     ipv6: Lyt kun på IPv6-adresser;
     ipv4: Lyt kun på IPv4-adresser.

note: Type: string Description
en: Local address extension character:
da: Lokalt tegn for endelsen på adresser:

note: Type: string Description
en: To not use address extensions, leave the string blank.
da: Efterlad tom for ikke at bruge adresseendelser.

note: Type: error Description
en: Bad recipient delimiter
da: Dårlig modtagerafgrænser

note: Type: error Description
en: The recipient delimiter must be a single character. '${enteredstring}' is what you entered.
da: Modtagerafgrænseren skal være et enkelt tegn. Du indtastede »${enteredstring}«.

note: Type: boolean Description
en: Force synchronous updates on mail queue?
da: Fremtving synkrone opdateringer på postkø?

note: Type: boolean Description
en: If synchronous updates are forced, then mail is processed more slowly. If not forced, then there is a remote chance of losing some mail if the system crashes at an inopportune time, and you are not using a journaled filesystem (such as ext3).
da: Hvis synkrone opdateringer fremtvinges, så bliver post behandlet langsommere. Hvis de ikke fremtvinges, er der en større - minimal - risiko for at miste noget post, hvis systemet bryder ned på et dårligt tidspunkt, og du ikke bruger et journaliseret filsystem (såsom ext3).

note: Type: string Description
en: Local networks:
da: Lokale netværk:

note: Type: string Description
en: Please specify the network blocks for which this host should relay mail. The default is just the local host, which is needed by some mail user agents. The default includes local host for both IPv4 and IPv6. If just connecting via one IP version, the unused value(s) may be removed.
da: Angiv venligst netværksblokkene som værten skal relaye post på. Standarden er den lokal vært, som kræves af nogle postbrugeragenter. Standarden inkluderer lokal vært for både IPv4 og IPv6. Hvis du kun forbinder via en IP-version, kan de ubrugte værdier fjernes.

note: Type: string Description
en: If this host is a smarthost for a block of machines, you need to specify the netblocks here, or mail will be rejected rather than relayed.
da: Hvis denne vært er en smarthost for en blok af maksiner, skal du angive netblokkene her, ellers  vil post blive afvist fremfor relayed.

note: Type: string Description
en: Mailbox size limit (bytes):
da: Størrelsesbegrænsning på postkasse (byte):

note: Type: string Description
en: Mail for the 'postmaster', 'root', and other system accounts needs to be redirected to the user account of the actual system administrator.
da: Post til »postmaster«, »root« og andre systemkonti skal videresendes til brugerkontoen for den aktuelle systemadministrator.

note: Type: string Description
en: If this value is left empty, such mail will be saved in /var/mail/nobody, which is not recommended.
da: Hvis denne værdi er tom, vil sådan post blive gemt i /var/mail/nobody, hvilket ikke anbefales.

note: Type: string Description
en: Mail is not delivered to external delivery agents as root.
da: Post leveres ikke til eksterne leveringsagenter som root (administrator).

note: Type: boolean Description
en: Run newaliases command?
da: Kør kommandoen newaliases?
