snapd - en to unknown language translation catalogue (432 entries)

en: %q does not contain an unpacked snap.
    
    Try "snapcraft prime" in your project directory, then "snap try" again.
target: %q ne contient aucun paquet Snap décompressé.
    
    Ensajatz « snapcraft prime » dins votre repertòri de projet, puis a nouveau « snap try ».

note: TRANSLATORS: the first %q will be the (quoted) snap name, the second a channel
en: %q switched to the %q channel
target: %q comutat sul canal %q

note: TRANSLATORS: 1. snap name, 2. snap version (keep those together please). the 3rd %s is a path (where it's mounted from).
en: %s %s mounted from %s
target: %s %s montat dempuèi %s

en: %s (delta)
target: %s (dèlta)

note: TRANSLATORS: %s is an error message (e.g. “cannot yadda yadda: permission denied”)
en: %s (see "snap login --help")
target: %s (veire « snap login --help »)

note: TRANSLATORS: %s is an error message (e.g. “cannot yadda yadda: permission denied”)
en: %s (try with sudo)
target: %s (ensajatz amb sudo)

en: %s already installed
target: %s es ja installat

en: %s disabled
target: %s desactivat

en: %s enabled
target: %s activat

en: %s not installed
target: %s es pas installat

en: %s removed
target: %s suprimit

note: TRANSLATORS: first %s is a snap name, second %s is a revision
en: %s reverted to %s
target: %s tornat a %s

note: TRANSLATORS: the args are a snap name optionally followed by a channel, then a version, then the developer name (e.g. "some-snap (beta) 1.3 from 'alice' installed")
en: %s%s %s from '%s' installed
target: %s%s %s de « %s » installat

note: TRANSLATORS: the args are a snap name optionally followed by a channel, then a version, then the developer name (e.g. "some-snap (beta) 1.3 from 'alice' refreshed")
en: %s%s %s from '%s' refreshed
target: %s%s %s de « %s » actualizat

note: TRANSLATORS: the args are a snap name optionally followed by a channel, then a version (e.g. "some-snap (beta) 1.3 installed")
en: %s%s %s installed
target: %s%s %s installat

note: TRANSLATORS: the args are a snap name optionally followed by a channel, then a version (e.g. "some-snap (beta) 1.3 refreshed")
en: %s%s %s refreshed
target: %s%s %s actualizat

en: --list does not take mode nor channel flags
target: --list accèpta pas ni los marcadors de mòde ni los marcadors de canal

en: --time does not take mode nor channel flags
target: --time accèpta pas las opcions mòde e/o canal

en: -r can only be used with --hook
target: -r pòt pas èsser utilizat qu'amb --hook

note: TRANSLATORS: This needs to begin with < and end with >
en: <alias-or-snap>
target: <aliàs o paquet Snap>

note: TRANSLATORS: This needs to begin with < and end with >
en: <alias>
target: <aliàs>

note: TRANSLATORS: This needs to begin with < and end with >
en: <assertion file>
target: <fichièr d'assercion>

note: TRANSLATORS: This needs to begin with < and end with >
en: <assertion type>
target: <tipe d'assercion>

note: TRANSLATORS: This needs to begin with < and end with >
en: <change-id>
target: <identificant de cambiament>

note: TRANSLATORS: This needs to begin with < and end with >
en: <conf value>
target: <Valor de configuracion>

note: TRANSLATORS: This is a noun, and it needs to begin with < and end with > TRANSLATORS: This is a noun and it needs to begin with < and end with >
en: <email>
target: <corrièl>

note: TRANSLATORS: This needs to begin with < and end with >
en: <filename>
target: <nom del fichièr>

note: TRANSLATORS: This needs to begin with < and end with >
en: <header filter>
target: <filtre d'entèsta>

note: TRANSLATORS: This needs to begin with < and end with >
en: <interface>
target: <interfàcia>

note: TRANSLATORS: This needs to begin with < and end with >
en: <key-name>
target: <nom de la clau>

note: TRANSLATORS: This needs to begin with < and end with >
en: <model-assertion>
target: <modèl d'assercion>

note: TRANSLATORS: This needs to begin with < and end with >
en: <query>
target: <requèsta>

note: TRANSLATORS: This needs to begin with < and end with >
en: <root-dir>
target: <repertòri raiç>

note: TRANSLATORS: This needs to begin with < and end with >
en: <service>
target: <servici>

note: TRANSLATORS: This needs to begin with < and end with >
en: <snap>:<plug>
target: <snap>:<connector>

note: TRANSLATORS: This needs to begin with < and end with >
en: <snap>:<slot or plug>
target: <snap>:<presa o connector>

note: TRANSLATORS: This needs to begin with < and end with >
en: <snap>:<slot>
target: <snap>:<presa>

en: Abort a pending change
target: Anullar un cambiament en espèra

en: Adds an assertion to the system
target: Ajoute una assertion au sistèma

note: TRANSLATORS: This should not start with a lowercase letter.
en: Alias for --dangerous (DEPRECATED)
target: Aliàs per --dangerous (OBSOLÈT)

en: All snaps up to date.
target: Totes los paquets Snaps son a jorn.

en: Allow opening file?
target: Autorizar la dobertura del fichièr ?

en: Allow settings change?
target: Autorizar la modificacion de las preferéncias ?

en: Allow snap %q to change %q to %q ?
target: Autorizar lo paquet Snap %q a cambiar %q en %q ?

en: Allow snap %q to open file %q?
target: Autorizar lo paquet Snap %q a dobrir lo fichièr %q ?

note: TRANSLATORS: This should not start with a lowercase letter.
en: Alternative command to run
target: Comanda alternativa a « run »

note: TRANSLATORS: This should not start with a lowercase letter.
en: Always return document, even with single key
target: Totjorn tornar un document, quitament amb una clau unica

note: TRANSLATORS: This should not start with a lowercase letter.
en: Always return list, even with single key
target: Totjorn tornar la lista, quitament amb una clau unica

note: TRANSLATORS: This should not start with a lowercase letter (unless it's "login.ubuntu.com"). Also, note users on login.ubuntu.com can have multiple email addresses.
en: An email of a user on login.ubuntu.com
target: Una adreça electronica d'un utilizaire sus login.ubuntu.com

note: TRANSLATORS: This should not start with a lowercase letter.
en: As well as starting the service now, arrange for it to be started on boot.
target: Amai d'aviar lo servici ara, lo configurar per que s'avie a l'aviada.

note: TRANSLATORS: This should not start with a lowercase letter.
en: As well as stopping the service now, arrange for it to no longer be started on boot.
target: Amai d'arrestar lo servici ara, lo configurar per que s'avie pas mai plus a l'aviada.

note: TRANSLATORS: This should not start with a lowercase letter.
en: Assertion file
target: Fichièr d'assercion

note: TRANSLATORS: This should not start with a lowercase letter.
en: Assertion type name
target: Nom del tipe d'assercion

en: Authenticates on snapd and the store
target: Authentifie sus Snapd e sus la logithèque

en: Auto-refresh %d snaps
target: Actualizar automaticament %d paquets Snap

en: Auto-refresh snap %q
target: Actualizar automaticament lo paquet Snap %q

note: TRANSLATORS: the %s is a comma-separated list of quoted snap names
en: Auto-refresh snaps %s
target: Actualizar automaticament los paquets Snap %s

en: Bad code. Try again:
target: Còde fals. Reensajatz :

en: Buys a snap
target: Achète un paquet Snap

note: TRANSLATORS: This should not start with a lowercase letter.
en: Change ID
target: Cambiar l'identificant

en: Changes configuration options
target: Modifica las opcions de configuracion

en: Command	Alias	Notes
target: Comanda	Aliàs	Nòtas

note: TRANSLATORS: This should not start with a lowercase letter.
en: Configuration value (key=value)
target: Valor de configuracion (clau=valor)

en: Confirm passphrase:
target: Confirmatz la frasa secreta :

en: Connect %s:%s to %s:%s
target: Connectar %s:%s a %s:%s

en: Connects a plug to a slot
target: Connecte un connecteur a una prise

note: TRANSLATORS: This should not start with a lowercase letter.
en: Constrain listing to a specific snap or snap:name
target: Limita la lista a un paquet Snap especific o snap:nom

note: TRANSLATORS: This should not start with a lowercase letter.
en: Constrain listing to specific interfaces
target: Limita la lista a d'interfàcias especificas

note: TRANSLATORS: This should not start with a lowercase letter.
en: Constrain listing to those matching header=value
target: Limita la lista als elements que correspondon a entèsta=Valor

en: Copy snap %q data
target: Copiar las donadas del paquet Snap %q

en: Create a cryptographic key pair that can be used for signing assertions.
target: Crear una paire de claus chiffrées qui pòt èsser utilizada per la signature des assertions.

en: Create cryptographic key pair
target: Crear una para de claus chifradas

en: Create snap build assertion
target: Crear una assertion de construction del paquet Snap

en: Create snap-build assertion for the provided snap file.
target: Crear una assertion de construction del paquet Snap per lo fichièr Snap fourni.

en: Creates a local system user
target: Crée un utilizaire local del sistèma

en: Delete cryptographic key pair
target: Suprimir una para de claus chifradas

en: Delete the local cryptographic key pair with the given name.
target: Suprimir la paire de claus locales chiffrées possédant lo nom indiqué.

en: Disable %q snap
target: Paquet Snap %q desactivat

en: Disable aliases for snap %q
target: Desactivar los aliasses pel paquet Snap %q

en: Disable all aliases for snap %q
target: Desactiva totes los aliasses pel paquet Snap %q

en: Disables a snap in the system
target: Desactiva un paquet Snap dins lo sistèma

en: Discard interface connections for snap %q (%s)
target: Escafar las connexions entre interfàcias pel paquet Snap %q (%s)

en: Disconnect %s:%s from %s:%s
target: Desconnectar %s:%s de %s:%s

en: Disconnects a plug from a slot
target: Déconnecte un connecteur d'una prise

note: TRANSLATORS: This should not start with a lowercase letter.
en: Do not wait for the operation to finish but just print the change id.
target: Esperar pas la fin de l'operacion, mas afichar simplament l'identificant de modificacion.

en: Download snap %q%s from channel %q
target: Telecargar un paquet Snap %q%s a partir del canal %q

note: TRANSLATORS: This should not start with a lowercase letter.
en: Download the given revision of a snap, to which you must have developer access
target: Telecargar la revision donada d'un paquet Snap, cap a la quala vos cal aver d'accèsses desvolopaire

en: Downloads the given snap
target: Télécharge lo paquet Snap en question

en: Email address:
target: Adreça electronica :

en: Enable %q snap
target: Activar lo paquet Snap %q

en: Enables a snap in the system
target: Active un paquet Snap dins lo sistèma

en: Ensure prerequisites for %q are available
target: Asseguratz-vos que los prerequesits per %q son disponibles

en: Export a public key assertion body that may be imported by other systems.
target: Exportar un corps d'assercion de clau publique qui puisse être importé per d'autres sistèmas.

en: Export cryptographic public key
target: Exportar una clau de chiframent publica

en: Fetch and check assertions for snap %q%s
target: Recuperar e verificar las assercions pel paquet Snap %q%s

en: Fetching assertions for %q
target: Recuperacion de las assercions per %q

en: Fetching snap %q
target: Recuperacion del paquet Snap %q

note: TRANSLATORS: This should not start with a lowercase letter.
en: Filename of the snap you want to assert a build for
target: Lo nom del fichièr del paquet Snap pel qual volètz definir una version

en: Finds packages to install
target: Trouve los paquets a installar

note: TRANSLATORS: This should not start with a lowercase letter.
en: Force adding the user, even if the device is already managed
target: Forçar l'apondon de l'utilizaire, quitament se l'aparelh es ja administrat

note: TRANSLATORS: This should not start with a lowercase letter.
en: Force import on classic systems
target: Forçar l'importacion dins los sistèmas classics

en: Format public key material as a request for an account-key for this account-id
target: Formatar lo material de clau publica coma una demanda de clau de compte per aqueste identificant de compte

en: Generate device key
target: Generar la clau del periferic

note: TRANSLATORS: This should not start with a lowercase letter.
en: Generate the manpage
target: Generar las paginas de manual

note: TRANSLATORS: This should not start with a lowercase letter.
en: Grade states the build quality of the snap (defaults to 'stable')
target: Lo grad indica la qualitat de version del paquet Snap (« stable » per defaut)

note: TRANSLATORS: This should not start with a lowercase letter.
en: Grant sudo access to the created user
target: Acordar los accèsses administrator a l'utilizaire creat

en: Help
target: Aide

note: TRANSLATORS: This should not start with a lowercase letter.
en: Hook to run
target: Punt d'acròcha a executar

en: ID	Status	Spawn	Ready	Summary
target: Identificant	Estat	Descendéncia	Prèst	Resumit

note: TRANSLATORS: This should not start with a lowercase letter.
en: Identifier of the signer
target: Identificant del signatari

note: TRANSLATORS: This should not start with a lowercase letter.
en: Identifier of the snap package associated with the build
target: Identificant del paquet Snap associat a la version

note: TRANSLATORS: This should not start with a lowercase letter.
en: Ignore validation by other snaps blocking the refresh
target: Ignorar la validacion per d'autres paquets Snap que blòcan l'actualizacion

en: In order to buy %q, you need to agree to the latest terms and conditions. Please visit https://my.ubuntu.com/payment/edit to do this.
    
    Once completed, return here and run 'snap buy %s' again.
target: Per crompar %q, vos cal acceptar la darrièra version de las condicions generalas. Per aquò, anatz sus https://my.ubuntu.com/payment/edit.
    
    Puèi, tornatz aicí e executatz tornamai « snap buy %s ».

en: Include a verbose list of a snap's notes (otherwise, summarise notes)
target: Inclure una liste detalhada des notes d'un paquet Snap (résume les notes dans lo cas contraire)

note: TRANSLATORS: This should not start with a lowercase letter.
en: Include unused interfaces
target: Inclure las interfàcias inutilizadas

en: Initialize device
target: Inicializar l'aparelh

en: Inspects devices for actionable information
target: Cherche las informacions actionnables sus les aparelhs

en: Install %q snap
target: Installar lo paquet Snap %q

en: Install %q snap from %q channel
target: Installar lo paquet Snap %q que proven del canal %q

en: Install %q snap from file
target: Installar lo paquet Snap %q a partir del fichièr

en: Install %q snap from file %q
target: Installar lo paquet Snap %q a partir del fichièr %q

note: TRANSLATORS: This should not start with a lowercase letter.
en: Install from the beta channel
target: Installar a partir del canal bèta

note: TRANSLATORS: This should not start with a lowercase letter.
en: Install from the candidate channel
target: Installar a partir del canal candidat

note: TRANSLATORS: This should not start with a lowercase letter.
en: Install from the edge channel
target: Installar a partir del canal avançat

note: TRANSLATORS: This should not start with a lowercase letter.
en: Install from the stable channel
target: Installar a partir del canal estable

en: Install snap %q
target: Installar lo paquet Snap %q

note: TRANSLATORS: the %s is a comma-separated list of quoted snap names
en: Install snaps %s
target: Installar los paquets Snaps %s

note: TRANSLATORS: This should not start with a lowercase letter.
en: Install the given revision of a snap, to which you must have developer access
target: Installar la revision donada d'un paquet Snap, al qual vos cal aver los accèsses desvolopaire

note: TRANSLATORS: This should not start with a lowercase letter.
en: Install the given snap file even if there are no pre-acknowledged signatures for it, meaning it was not verified and could be dangerous (--devmode implies this)
target: Installar lo paquet Snap donat quitament se i a pas de signaturas reconegudas prealablament per aqueste, aquò significa qu'es pas estat verificat e poiriá èsser dangierós (--devmode implica aquò)

note: TRANSLATORS: This should not start with a lowercase letter.
en: Install the given snap without enabling its automatic aliases
target: Installar lo snap donat sens activar sos aliasses automatics

en: Install the snap with:
       snap ack %s
       snap install %s
target: Installar lo paquet Snap amb :
       snap ack %s
       snap install %s

en: Installs a snap to the system
target: Installe un paquet Snap sus lo sistèma

note: TRANSLATORS: This should not start with a lowercase letter.
en: Key of interest within the configuration
target: Clau d'interès dins lo quadre de la configuracion

en: List a change's tasks
target: Listar los prètzfaitss d'una modificacion

en: List cryptographic keys
target: Listar las claus de chiframent

en: List cryptographic keys that can be used for signing assertions.
target: Listar las claus de chiframent qui pòdon èsser utilizadas per la signature des assertions.

en: List installed snaps
target: Listar los paquets Snap installats

en: List system changes
target: Listar los cambiaments del sistèma

en: Lists aliases in the system
target: Afichar la liste des alias dins lo sistèma

en: Lists all repairs
target: Liste totas las reparacions

en: Lists interfaces in the system
target: Liste las interfàcias dins lo sistèma

en: Lists snap interfaces
target: Liste las interfàcias snap

en: Log out of the store
target: Se desconnectar de la logithèque

en: Login successful
target: Connexion capitada

en: Make current revision for snap %q unavailable
target: Rendre indisponibla la revision actuala del paquet Snap %q

en: Make snap %q (%s) available to the system
target: Rendre disponible lo paquet Snap %q (%s) pel sistèma

en: Make snap %q (%s) unavailable to the system
target: Rendre indisponible lo paquet Snap %q (%s)  pel sistèma

en: Make snap %q unavailable to the system
target: Rendre indisponible lo paquet Snap %q pel sistèma

en: Make snap %q%s available to the system
target: Rendre disponible lo paquet Snap %q%s pel sistèma

en: Mark system seeded
target: Marcar lo sistèma coma preparat

en: Mount snap %q%s
target: Montar lo paquet Snap %q%s

note: TRANSLATORS: This should not start with a lowercase letter.
en: Name of key to create; defaults to 'default'
target: Nom de la clau de crear ; « default » per defaut

note: TRANSLATORS: This should not start with a lowercase letter.
en: Name of key to delete
target: Nom de la clau de suprimir

note: TRANSLATORS: This should not start with a lowercase letter.
en: Name of key to export
target: Nom de la clau d'exportar

note: TRANSLATORS: This should not start with a lowercase letter.
en: Name of the GnuPG key to use (defaults to 'default' as key name)
target: Nom de la clau GnuPG d'utilizar (nom de clau « default » per defaut)

note: TRANSLATORS: This should not start with a lowercase letter.
en: Name of the key to use, otherwise use the default key
target: Nom de la clau d'utilizar, utilizacion de la clau per defaut autrament

en: Name	SHA3-384
target: Nom	SHA3-384

en: Name	Summary
target: Nom	Resumit

en: Name	Version	Developer	Notes	Summary
target: Nom	Version	Desvolopaire	Notes	Résumé

en: Name	Version	Rev	Developer	Notes
target: Nom	Version	Revision	Desvolopaire	Notes

en: No aliases are currently defined for snap %q.
target: Cap d'aliàs es pas definit pel paquet Snap %q.

en: No connections to disconnect
target: Pas cap de connexion de desconnectar

en: No snaps are installed yet. Try "snap install hello-world".
target: Aucun paquet Snap n'est encore installat. Ensajatz « snap install hello-world ».

note: TRANSLATORS: This should not start with a lowercase letter.
en: Output results in JSON format
target: Resultats de sortida en format JSON

en: Passphrase:
target: Frasa secreta :

en: Password of %q:
target: Senhal de %q : amp>

note: TRANSLATORS: %q, %q and %s are the snap name, developer, and price. Please wrap the translation at 80 characters.
en: Please re-enter your Ubuntu One password to purchase %q from %q
    for %s. Press ctrl-c to cancel.
target: Picatz tornamai vòstre senhal Ubuntu One per 
    crompar %q de %q per %s. Quichatz sus Ctrl-C per anullar.

en: Prefer aliases for snap %q
target: Preferís los aliasses pel paquet Snap %q

en: Prefer aliases from a snap and disable conflicts
target: Preferís los aliasses d'un paquet Snap e desactiva los conflictes

en: Prefer aliases of snap %q
target: Preferís los aliasses del paquet Snap %q

en: Prepare a snappy image
target: Preparar una image Snappy

en: Prepare snap %q (%s)
target: Preparar lo paquet Snap %q (%s)

en: Prepare snap %q%s
target: Preparar lo paquet Snap %q%s

en: Print the version and exit
target: Imprimir la version e quitar

en: Prints configuration options
target: Aficha las opcions de configuracion

en: Prints the confinement mode the system operates in
target: Imprime lo mode de confinement dins lequel lo sistèma fonctionne

en: Prints whether system is managed
target: Indique si lo sistèma es géré

note: TRANSLATORS: This should not start with a lowercase letter.
en: Put snap in classic mode and disable security confinement
target: Plaçar lo paquet Snap en mòde classic e desactivar lo confinament de seguretat

note: TRANSLATORS: This should not start with a lowercase letter.
en: Put snap in development mode and disable security confinement
target: Plaçar lo paquet Snap en mòde desvolopament e desactivar lo confinament de seguretat

note: TRANSLATORS: This should not start with a lowercase letter.
en: Put snap in enforced confinement mode
target: Plaçar lo paquet Snap en mòde de confinament forçat

en: Query the status of services
target: Interrogar l'estat dels servicis

en: Refresh %q snap
target: Actualizar lo paquet Snap %q

en: Refresh %q snap from %q channel
target: Actualizar lo paquet Snap %q del canal %q

en: Refresh aliases for snap %q
target: Actualiza los aliasses pel paquet Snap %q

en: Refresh all snaps: no updates
target: Actualizar totes los paquets Snap : pas de mesa a jorn

en: Refresh snap %q
target: Actualizar lo paquet Snap %q

note: TRANSLATORS: the %s is a comma-separated list of quoted snap names
en: Refresh snaps %s
target: Actualizar los paquets Snap %s

note: TRANSLATORS: the %s is a comma-separated list of quoted snap names
en: Refresh snaps %s: no updates
target: Actualizar automaticament los paquets Snap %s : pas de mesa a jorn

en: Refresh to the given revision
target: Actualizar la revision donada

en: Refreshes a snap in the system
target: Actualise un paquet Snap del sistèma

en: Remove %q snap
target: Suprimir lo paquet Snap %q

en: Remove aliases for snap %q
target: Suprimir los aliasses pel paquet Snap %q

en: Remove data for snap %q (%s)
target: Suprimir las donadas del paquet Snap %q (%s)

en: Remove manual alias %q for snap %q
target: Suprimís l'aliàs manual %q pel paquet Snap %q

note: TRANSLATORS: This should not start with a lowercase letter.
en: Remove only the given revision
target: Suprimir unicament la revision donada

en: Remove security profile for snap %q (%s)
target: Suprimir lo perfil de seguretat del paquet Snap %q (%s)

en: Remove security profiles of snap %q
target: Suprimir lo perfil de seguretat del paquet Snap %q

en: Remove snap %q
target: Suprimir lo paquet Snap %q

en: Remove snap %q (%s) from the system
target: Suprimir lo paquet Snap %q (%s) del sistèma

note: TRANSLATORS: the %s is a comma-separated list of quoted snap names
en: Remove snaps %s
target: Suprimir los paquets Snap %s

note: TRANSLATORS: this is used to introduce a list of aliases that were removed
en: Removed
target: Suprimit

en: Removes a snap from the system
target: Supprime un paquet Snap del sistèma

en: Request device serial
target: Demandar lo numèro de seria de l'aparelh

en: Restart services
target: Reaviar los servicis

en: Restarted.
target: Reaviat.

note: TRANSLATORS: This should not start with a lowercase letter.
en: Restrict the search to a given section
target: Restrénher la recèrca a una seccion donada

en: Retrieve logs of services
target: Recuperar los jornals de servicis

en: Revert %q snap
target: Restablir lo paquet Snap %q

en: Reverts the given snap to the previous state
target: Retablís lo paquet Snap donat a son precedent estat

note: TRANSLATORS: This should not start with a lowercase letter.
en: Run a shell instead of the command (useful for debugging)
target: Executar un shell puslèu que la comanda (utile pel desbugatge)

en: Run configure hook of %q snap
target: Executar la configuracion del punt d'acròcha del paquet Snap %q

en: Run configure hook of %q snap if present
target: Executar la configuracion del punt d'acròcha del paquet Snap %q s'es present

en: Run hook %s of snap %q
target: Executar lo punt d'acròcha %s del paquet Snap %q

en: Run install hook of %q snap if present
target: Aviar l'installacion del punt d'acròcha del snap %q se existent

en: Run post-refresh hook of %q snap if present
target: Aviar lo post-refrescament del punt d'acròcha del snap %q se existent

en: Run prepare-device hook
target: Executar lo punt d'acròcha prepare-device

en: Run remove hook of %q snap if present
target: Aviar la supression del punt d'acròcha del snap %q se existent

note: TRANSLATORS: This should not start with a lowercase letter.
en: Run the command with gdb
target: Executar la comanda amb gdb

en: Run the given snap command
target: Executar la comanda Snap donada

en: Run the given snap command with the right confinement and environment
target: Executar la comanda Snap donada amb lo confinement e l'environnement corrects

en: Runs debug commands
target: Exécute les commandes de desbugatge

note: TRANSLATORS: This should not start with a lowercase letter.
en: Search private snaps
target: Recercar de paquets Snap privats

en: Select last change of given type (install, refresh, remove, try, auto-refresh etc.)
target: Sélectionnez lo dernier cambiament de type donat (installar, actualizar, suprimir, ensajar, actualizar automaticament, etc.)

en: Set automatic aliases for snap %q
target: Definir los aliasses automatics pel paquet Snap %q

en: Sets up a manual alias
target: Definís un aliàs manuel

en: Setup alias %q => %q for snap %q
target: Definís l'aliàs %q => %q pel paquet Snap %q

en: Setup manual alias %q => %q for snap %q
target: Definís l'aliàs manual %q => %q pel paquet Snap %q

en: Setup snap %q (%s) security profiles
target: Configurar los perfils de seguretat del paquet Snap %q (%s)

en: Setup snap %q aliases
target: Configurar los aliasses del paquet Snap %q

en: Setup snap %q%s security profiles
target: Definir los perfils de seguretat del paquet Snap %q%s

en: Setup snap %q%s security profiles (phase 2)
target: Configurer los perfils de seguretat del paquet Snap %q%s (phase 2)

note: TRANSLATORS: This should not start with a lowercase letter.
en: Show all revisions
target: Afichar totas las revisions

note: TRANSLATORS: This should not start with a lowercase letter.
en: Show auto refresh information but do not perform a refresh
target: Aficha las informacions de refrescament automatic sens actualizar

en: Show available snaps for refresh but do not perform a refresh
target: Aficha los paquets Snap disponibles per un refrescament sens efectuar d'actualizacion

note: TRANSLATORS: This should not start with a lowercase letter.
en: Show details of a specific interface
target: Afichar los detalhs d'una interfàcia especifica

note: TRANSLATORS: This should not start with a lowercase letter.
en: Show interface attributes
target: Afichar los atributs de l'interfàcia

en: Shows known assertions of the provided type
target: Aficha las assercions connues del type fourni

en: Shows specific repairs
target: Aficha les réparations spécifiques

en: Shows version details
target: Afichar los detalhs de la version

en: Sign an assertion
target: Signar una assercion

en: Sign an assertion using the specified key, using the input for headers from a JSON mapping provided through stdin, the body of the assertion can be specified through a "body" pseudo-header.
target: Signer una assertion amb la clau spécifiée, en utilisant coma entrée per les entèstas un modèl JSON fourni via stdin. Lo corps de l'assercion peut être spécifié via un pseudo-entèsta « body ».

en: Slot	Plug
target: Presa	Connector

note: TRANSLATORS: This should not start with a lowercase letter.
en: Snap name
target: Nom del paquet Snap

en: Sorry, your payment method has been declined by the issuer. Please review your
    payment details at https://my.ubuntu.com/payment/edit and try again.
target: O planhèm, vòstre mòde de pagament es refusat per l'emeteire. Consultatz vòstres
    detalhs de pagament sus https://my.ubuntu.com/payment/edit e reensajatz.

en: Start services
target: Aviar los servicis

en: Start snap %q (%s) services
target: Aviar los servicis del paquet Snap %q (%s)

en: Start snap %q%s services
target: Aviar los servicis del paquet Snap %q%s

en: Start snap services
target: Aviar los servicis del paquet Snap

en: Start the userd service
target: Aviar lo servici userd

en: Started.
target: Aviat.

en: Status	Spawn	Ready	Summary
target: Estat	Descendéncia	Prèst	Resumit

en: Stop services
target: Arrestar los servicis

en: Stop snap %q (%s) services
target: Arrestar los servicis del paquet Snap %q (%s)

en: Stop snap %q services
target: Arrestar los servicis del paquet Snap %q

en: Stop snap services
target: Arrestar los servicis del paquet Snap

en: Stopped.
target: Arrestat.

note: TRANSLATORS: This should not start with a lowercase letter.
en: Strict typing with nulls and quoted strings
target: Picada exacta amb cadenas voidas e entre verguetas

en: Switch %q snap to %s
target: Bascular lo snap %q cap a %s

en: Switch snap %q from %s to %s
target: Passar lo paquet Snap %q de %s a %s

en: Switch snap %q to %s
target: Bascular lo snap %q sus %s

en: Switches snap to a different channel
target: Bascula lo snap sus un autre canal

note: TRANSLATORS: This should not start with a lowercase letter.
en: Temporarily mount device before inspecting
target: Montar lo periferic temporàriament abans inspeccion

en: Tests a snap in the system
target: Teste un paquet Snap dins lo sistèma

note: TRANSLATORS: %q and %s are the same snap name. Please wrap the translation at 80 characters.
en: Thanks for purchasing %q. You may now install it on any of your devices
    with 'snap install %s'.
target: Mercé d'aver crompat %q. Ara, lo podètz installar sus vòstres aparelhs
    via un « snap install %s ».

en: The get command prints configuration and interface connection settings.
target: La comanda « get » aficha los paramètres de configuracion e de l'interfàcia de connexion.

note: TRANSLATORS: This should not start with a lowercase letter (unless it's "login.ubuntu.com")
en: The login.ubuntu.com email to login as
target: L'adreça electronica login.ubuntu.com amb la quala se cal connectar

note: TRANSLATORS: This should not start with a lowercase letter.
en: The model assertion name
target: Lo nom del modèl d'assercion

note: TRANSLATORS: This should not start with a lowercase letter.
en: The output directory
target: Lo repertòri de sortida

note: TRANSLATORS: This should not start with a lowercase letter.
en: The snap to configure (e.g. hello-world)
target: Lo paquet Snap de configurar (per exemple, hello-world)

note: TRANSLATORS: This should not start with a lowercase letter.
en: The snap whose conf is being requested
target: Lo paquet Snap que la configuracion n'es demandada

en: The userd command starts the snap user session service.
target: La comanda userd démarre lo servici de session d'utilizaire de snap

en: This command logs the current user out of the store
target: Cette comanda déconnecte l'utilizaire actuel de la logithèque

en: Tool to interact with snaps
target: Aisina per interagir amb los paquets Snap

en: Transition security profiles from %q to %q
target: Transferiment dels perfils de seguretat de %q cap a %q

en: Transition ubuntu-core to core
target: Transferiment d'ubuntu-core cap a core

en: Try %q snap from %s
target: Ensajar lo paquet Snap %q de %s

en: Two-factor code:
target: Còdi de dos factors :

en: Unalias a manual alias or an entire snap
target: Suprimís un aliàs manual o un paquet Snap entièr

note: TRANSLATORS: This should not start with a lowercase letter.
en: Use a specific snap revision when running hook
target: Utilizar una version especifica del paquet Snap al moment de l'execucion del punt d'acròcha

note: TRANSLATORS: This should not start with a lowercase letter.
en: Use known assertions for user creation
target: Utilizar las assercions conegudas per la creacion d'utilizaire

note: TRANSLATORS: This should not start with a lowercase letter.
en: Use this channel instead of stable
target: Utilizar aqueste canal puslèu que lo canal estable

en: WARNING: The output of "snap get" will become a list with columns - use -d or -l to force the output format.
target: AVERTISSEMENT : La sortida de « snap get » deviendra una liste amb des colonnes, utilisez -d o -l per forcer lo format de sortida.

en: WARNING: failed to activate logging: %v
target: ATENCION : fracàs de l'activacion de la connexion : %v

en: Waiting for server to restart
target: En espèra de la reaviada del servidor

en: Watch a change in progress
target: Susvelhar un cambiament en cors

en: Wrong again. Once more:
target: Tornamai incorrècte. Encara un còp :

en: Xauthority file isn't owned by the current user %s
target: Lo fichièr Xauthority aparten pas a l'utilizaire actual %s

en: Yes, yes it does.
target: Òc, òc es lo cas.

en: You need to be logged in to purchase software. Please run 'snap login' and try again.
target: Vos cal èsser connectat per crompar de logicials. Executatz « snap login » e réensajar.

en: You need to have a payment method associated with your account in order to buy a snap, please visit https://my.ubuntu.com/payment/edit to add one.
    
    Once you’ve added your payment details, you just need to run 'snap buy %s' again.
target: Un mòde de pagament deu èsser associat a vòstre compte per poder crompar un paquet Snap. Anatz sus https://my.ubuntu.com/payment/edit per n'apondre un.
    
    Puèi, sufís d'executar tornamai « snap buy %s ».

note: TRANSLATORS: the %s is the argument given by the user to "snap changes"
en: "snap changes" command expects a snap name, try: "snap tasks %s"
target: La comanda « snap changes » attend un nom de paquet Snap, ensajatz : « snap tasks %s »

en: 
    Install, configure, refresh and remove snap packages. Snaps are
    'universal' packages that work across many different Linux systems,
    enabling secure distribution of the latest apps and utilities for
    cloud, servers, desktops and the internet of things.
    
    This is the CLI for snapd, a background service that takes care of
    snaps on the system. Start with 'snap list' to see installed snaps.
target: 
    Installar, configurer, actualizar e suprimir des paquets Snap. Ceux-ci sont des
    « paquets universels » qui fonctionnent sus de nombreux sistèmas Linux différents,
    permettant la distribution sécurisée des dernières applications e des derniers utilitaires pour
    le nuage, les servidors, les ordinateurs de bureau e l'internet des objets.
    
    Aquò es l'interfàcia en ligne de comanda per Snapd, un service en arrière-plan qui prend en charge les
    paquets Snap sus lo sistèma. Commencez amb « snap list » per voir les paquets Snap installats.

en: 
    The abort command attempts to abort a change that still has pending tasks.
target: 
    La comanda « abort » ensaja d'interrompre un cambiament qu'a encara de prètzfaits en cors.

en: 
    The ack command tries to add an assertion to the system assertion database.
    
    The assertion may also be a newer revision of a preexisting assertion that it
    will replace.
    
    To succeed the assertion must be valid, its signature verified with a known
    public key and the assertion consistent with and its prerequisite in the
    database.
target: 
    La comanda « ack » essaye d'ajouter una assertion a la basa de donadas d'assercions del sistèma.
    
    L'assercion peut également être una nouvelle revision d'una assertion préexistante qu'elle remplacera.
    
    Pour réussir, l'assercion doit être valide, sa signature vérifiée amb una clé publique connue e per 
    laquelle l'assercion es consistante e sa condition préalable dins la base de donadas.

en: 
    The alias command aliases the given snap application to the given alias.
    
    Once this manual alias is setup the respective application command can be invoked just using the alias.
target: 
    La comanda « alias » associe lo paquet Snap donat a l'aliàs donat.
    
    Una fois que cet alias manuel es défini, la comanda de l'aplicacion correspondante pòt èsser invoquée en utilisant simplement l'aliàs.

en: 
    The aliases command lists all aliases available in the system and their status.
    
    $ snap aliases <snap>
    
    Lists only the aliases defined by the specified snap.
    
    An alias noted as undefined means it was explicitly enabled or disabled but is
    not defined in the current revision of the snap; possibly temporarely (e.g
    because of a revert), if not this can be cleared with snap alias --reset.
target: 
    La comanda « alisases » aficha la liste de Totes los alias disponibles dins le sistèma e leur état.
    
    $ snap aliases <snap>
    
    Aficha uniquement los aliasses définis pel paquet Snap spécifié.
    
    Un alias es indiqué coma indéfini s'il a été explicitement activé o désactivé mais 
    qu'il es pas défini dins la version del paquet Snap en cors d'utilisation ;
    éventuellement temporairement (par exemple a cause d'un retour en arrière),
    sinon ceci pòt èsser résolu amb snap alias --reset.

en: 
    The auto-import command searches available mounted devices looking for
    assertions that are signed by trusted authorities, and potentially
    performs system changes based on them.
    
    If one or more device paths are provided via --mount, these are temporariy
    mounted to be inspected as well. Even in that case the command will still
    consider all available mounted devices for inspection.
    
    Imported assertions must be made available in the auto-import.assert file
    in the root of the filesystem.
target: 
    La comanda « auto-import » recèrca las assercions signées per des
    autorités de confiance sus les aparelhs montés disponibles et, lo cas échéant, 
    exécute des modifications del sistèma sus cette base.
    
    Si un o plusieurs aparelhs sont disponibles via --mount, ils sont montés 
    temporairement per être inspectés eux aussi. Même dins ce cas, la commande
    prendra totjorn en compte Totes los aparelhs montés.
    
    Les assertions importées doivent être disponibles dins lo fichièr auto-import.assert 
    à la racine del sistèma de fichièr.

en: 
    The buy command buys a snap from the store.
target: 
    La comanda « buy » crompa un paquet Snap dins la logitèca.

en: 
    The changes command displays a summary of the recent system changes performed.
target: 
    La comanda « changes » aficha un résumé des cambiaments récents effectués sur lo sistèma.

en: 
    The confinement command will print the confinement mode (strict, partial or none)
    the system operates in.
target: 
    La comanda de confinement imprimira lo mode de confinement (strict, partiel ou aucun)
    dans lequel lo sistèma fonctionne.

en: 
    The connect command connects a plug to a slot.
    It may be called in the following ways:
    
    $ snap connect <snap>:<plug> <snap>:<slot>
    
    Connects the provided plug to the given slot.
    
    $ snap connect <snap>:<plug> <snap>
    
    Connects the specific plug to the only slot in the provided snap that matches
    the connected interface. If more than one potential slot exists, the command
    fails.
    
    $ snap connect <snap>:<plug>
    
    Connects the provided plug to the slot in the core snap with a name matching
    the plug name.
target: 
    La comanda « connect » religa un connector a una presa.
    Pòt èsser apelada de doas manièras :
    
    $ snap connect <snap>:<connector> <snap>:<presa>
    
    Religa lo connector indicat a la presa especificada.
    
    $ snap connect <snap>:<connector> <snap>
    
    Religa lo connector especificat a la sola presa del paquet Snap que correspond
    a l'interfàcia connectada. S'existís mai d'una presa potenciala, la comanda
    fracassa.
    
    $ snap connect <snap>:<connector>
    
    Connècta lo connector indicat dins la presa del paquet Snap principal amb un nom que correspond
    al nom del connector.

en: 
    The create-user command creates a local system user with the username and SSH
    keys registered on the store account identified by the provided email address.
    
    An account can be setup at https://login.ubuntu.com.
target: 
    La comanda « create-user » crèa un utilizaire local del sistèma amb lo nom d'utilizaire
    e las claus SSH enregistradas sul compte de la logitèca identificat via l'adreça electronica provesida.
    
    Un compte pòt èsser configurat sus https://login.ubuntu.com.

en: 
    The debug command contains a selection of additional sub-commands.
    
    Debug commands can be removed without notice and may not work on
    non-development systems.
target: 
    La comanda « debug » compòrta mantuna soscomanda supplémentaires.
    
    La comanda debug pòt èsser suprimida sens preavís e es possible que
    foncione pas dins los sistèmas autres que de desvolopament.

en: 
    The disable command disables a snap. The binaries and services of the
    snap will no longer be available. But all the data is still available
    and the snap can easily be enabled again.
target: 
    La comanda « disable » desactiva un paquet Snap. Les binaires e les services del paquet
    Snap ne seront plus disponibles. Mais totas las donadas seront totjorn disponibles e lo paquet
    Snap peut facilement être de nouveau activé.

en: 
    The disconnect command disconnects a plug from a slot.
    It may be called in the following ways:
    
    $ snap disconnect <snap>:<plug> <snap>:<slot>
    
    Disconnects the specific plug from the specific slot.
    
    $ snap disconnect <snap>:<slot or plug>
    
    Disconnects everything from the provided plug or slot.
    The snap name may be omitted for the core snap.
target: 
    La comanda « disconnect » desconnècta un connector d'una presa.
    Pòt èsser apelada de doas manièras :
    
    $ snap disconnect <snap>:<connector> <snap>:<presa>
    
    Desconnècta lo connector indicat de la presa especificada.
    
    $ snap disconnect <snap>:<presa o connector>
    
    Desconnècta tot çò qu'es religat al connector indicat o a la presa especificada.
    Lo nom del paquet Snap pòt èsser omés pel paquet Snap principal.

en: 
    The download command downloads the given snap and its supporting assertions
    to the current directory under .snap and .assert file extensions, respectively.
target: 
    La comanda « download » télécharge lo paquet Snap indiqué e las assercions 
    qui lui sont nécessaires dins lo repertòri en cors d'utilisation, dins des fichièrs
    portant respectivement les extensions .snap e .assert.

en: 
    The enable command enables a snap that was previously disabled.
target: 
    La comanda « enable » activa un paquet Snap qu'es estat desactivat precedentament.

en: 
    The find command queries the store for available packages in the stable channel.
target: 
    La comanda find interroge lo magasin per los paquets disponibles dins lo canal stable.

en: 
    The get command prints configuration options for the current snap.
    
        $ snapctl get username
        frank
    
    If multiple option names are provided, a document is returned:
    
        $ snapctl get username password
        {
            "username": "frank",
            "password": "..."
        }
    
    Nested values may be retrieved via a dotted path:
    
        $ snapctl get author.name
        frank
    
    Values of interface connection settings may be printed with:
    
        $ snapctl get :myplug usb-vendor
        $ snapctl get :myslot path
    
    This will return the named setting from the local interface endpoint, whether a plug
    or a slot. Returning the setting from the connected snap's endpoint is also possible
    by explicitly requesting that via the --plug and --slot command line options:
    
        $ snapctl get :myplug --slot usb-vendor
    
    This requests the "usb-vendor" setting from the slot that is connected to "myplug".
target: 
    La comanda « get » aficha las opcions de configuracion pel paquet Snap en cours d'utilizacion.
    
        $ snapctl get username
        frank
    
    Se mantun nom d'opcions son provesits, la comanda renvia un document :
    
        $ snapctl get username password
        {
            "username": "frank",
            "password": "..."
        }
    
    Las valors imbricadas pòdon èsser recuperadas en utilizant un camin separat per de 
    punts :
    
        $ snapctl get author.name
        frank
    
    Las valors dels paramètres de connexion a l'interfàcia pòdon èsser afichats amb :
    
        $ snapctl get :monconnector usb-vendor
        $ snapctl get :mapresa path
    
    Aquò renvia los paramètres donats a partir de l'extremitat de l'interfàcia locala, que s'agisca 
    d'una presa o d'un connector. Es tanben possible de recuperar lo paramètre de 
    l'extremitat del paquet Snap connectat en lo demandant explicitament amb l'ajuda de las opcions 
    « --plug » e « --slot » :
    
        $ snapctl get :monconnector --slot usb-vendor
    
    Aquò recèrca lo paramètre « usb-vendor » de la presa qu'es connectada a « monconnector ».

en: 
    The get command prints configuration options for the provided snap.
    
        $ snap get snap-name username
        frank
    
    If multiple option names are provided, a document is returned:
    
        $ snap get snap-name username password
        {
            "username": "frank",
            "password": "..."
        }
    
    Nested values may be retrieved via a dotted path:
    
        $ snap get snap-name author.name
        frank
target: 
    La comanda « get » aficha las opcions de configuracion del paquet Snap
    mencionat.
    
        $ snap get nom-du-snap username
        frank
    
    Se los noms de mantuna opcion son demandats, la comanda renvia
    un document :
    
        $ snap get nom-du-snap username password
        {
            "username": "frank",
            "password": "..."
        }
    
    Las valors imbricadas pòdon èsser obtengudas en indicant 
    lo camin amb de punts :
    
        $ snap get nom-du-snap author.name
        frank

en: 
    The help command shows helpful information. Unlike this. ;-)
target: 
    La comanda « help » aficha des informations utiles - plus utiles que celle-ci ;)

en: 
    The info command shows detailed information about a snap, be it by name or by path.
target: 
    La comanda « info » aficha des informations detalhadas a propos d'un paquet Snap, que ce soit per nom o per camin.

en: 
    The install command installs the named snap in the system.
target: 
    La comanda « install » installe sus lo sistèma lo paquet Snap cité.

en: 
    The interface command shows details of snap interfaces.
    
    If no interface name is provided, a list of interface names with at least
    one connection is shown, or a list of all interfaces if --all is provided.
target: 
    La comanda interface aficha los detalhs de las interfàcias snap.
    
    Quand cap de nom d'interfàcia es pas provesit, una lista de noms d'interfàcia amb al mens 
    Una connexion es afichada, o la lista de totas las interfàcias quand --all es especificat.

en: 
    The interfaces command lists interfaces available in the system.
    
    By default all slots and plugs, used and offered by all snaps, are displayed.
     
    $ snap interfaces <snap>:<slot or plug>
    
    Lists only the specified slot or plug.
    
    $ snap interfaces <snap>
    
    Lists the slots offered and plugs used by the specified snap.
    
    $ snap interfaces -i=<interface> [<snap>]
    
    Filters the complete output so only plugs and/or slots matching the provided details are listed.
target: 
    La comanda « interfaces » liste las interfàcias disponibles dins lo sistèma.
    
    Par defaut, totas las prises e Totes los connecteurs, utilizats e offerts par Totes los paquets Snap, sont afichats.
     
    $ snap interfaces <snap>:<prise o connecteur>
    
    Liste uniquement les prises o les connecteurs spécifiés.
    
    $ snap interfaces <snap>
    
    Liste les prises offertes e les connecteurs utilizats pel paquet Snap spécifié.
    
    $ snap interfaces -i=<interface> [<snap>]
    
    Filtre toute la sortida de manière a ce que seuls les connecteurs et/ou les prises correspondants als détails fournis soient listés.

en: 
    The known command shows known assertions of the provided type.
    If header=value pairs are provided after the assertion type, the assertions
    shown must also have the specified headers matching the provided values.
target: 
    La comanda « known » aficha las assercions conegudas del tipe provesit.
    Se las paras entèsta=Valor son provesidas aprèp lo tipe d'assercion, las assercions
    afichadas devon alara aver lors entèstas que correspondon a las valors provesidas.

en: 
    The list command displays a summary of snaps installed in the current system.
target: 
    La comanda « list » aficha un résumé des paquets Snap installats sus lo sistèma actuel.

en: 
    The login command authenticates on snapd and the snap store and saves credentials
    into the ~/.snap/auth.json file. Further communication with snapd will then be made
    using those credentials.
    
    Login only works for local users in the sudo, admin or wheel groups.
    
    An account can be setup at https://login.ubuntu.com
target: 
    La comanda « login » authentifie vis-à-vis de Snapd e de la logithèque e enregistre les
    identificants dins lo fichièr ~/.snap/auth.json. Les communications a venir seront alors effectuées en
    utilisant ces identificants.
    
    La connexion marche uniquement per des utilizaires locaux des groupes sudo, admin o wheel.
    
    Un compte pòt èsser configuré sus https://login.ubuntu.com

en: 
    The managed command will print true or false informing whether
    snapd has registered users.
target: 
    La comanda « managed » aficha verai o fals, segon
    que Snapd aja d'utilizaires enregistrats o pas.

en: 
    The pack command packs the given snap-dir as a snap.
target: 
    La comanda pack prépare lo repertòri snap coma un snap.

en: 
    The prefer command enables all aliases of the given snap in preference
    to conflicting aliases of other snaps whose aliases will be disabled
    (removed for manual ones).
target: 
    La comanda « prefer » active Totes los alias del paquet Snap donat 
    et desactiva Totes los alias des paquets Snap qui entrent en conflit amb 
    ceux-ci (ou les supprime, dins lo cas des alias manuels).

en: 
    The publisher of snap %q has indicated that they do not consider this revision
    to be of production quality and that it is only meant for development or testing
    at this point. As a consequence this snap will not refresh automatically and may
    perform arbitrary system changes outside of the security sandbox snaps are
    generally confined to, which may put your system at risk.
    
    If you understand and want to proceed repeat the command including --devmode;
    if instead you want to install the snap forcing it into strict confinement
    repeat the command including --jailmode.
target: 
    Los editors del snap %q an indicat que la qualitat d'aquesta version es inferiora
    a la de produccion e qu'es pas, uèi, destinada qu'a de fins de desvolopament 
    o de tèst. Per consequéncia, aqueste snap se met pas a jorn automaticament e poiriá
    entrainar de modificacions arbitràrias del sistèma en defòra del nauc de sabla de seguretat ont 
    los snaps son de costuma confinats, e pòdon far córrer una risca a vòstre sistèma.
    
    Se comprenètz e que volètz contunhar, repetissètz la comanda en apondent --devmode ;
    siquenon, se volètz installar lo snap en lo constrenhent dins un confinament estrict,
    repetissètz la comanda en apondent --jailmode.

en: 
    The refresh command refreshes (updates) the named snap.
target: 
    La comanda « refresh » actualise (met a jour) lo paquet Snap cité.

en: 
    The remove command removes the named snap from the system.
    
    By default all the snap revisions are removed, including their data and the common
    data directory. When a --revision option is passed only the specified revision is
    removed.
target: 
    La comanda « remove » supprime del sistèma lo paquet Snap indiqué.
    
    Par defaut, totas las versions del paquet Snap sont suprimidas, y compris leurs donadas e 
    le repertòri commun de donadas. Quand una option « --revision » es provesida en argument, seule la
    version spécifiée es suprimida.

en: 
    The repair command shows the details about one or multiple repairs.
target: 
    La comanda repair aficha los detalhs d'una o de mantuna reparacions.

en: 
    The repairs command lists all processed repairs for this device.
target: 
    La comanda repair repertòria totas las reparacions tractadas per aqueste periferic.

en: 
    The restart command restarts the given services of the snap. If executed from the
    "configure" hook, the services will be restarted after the hook finishes.
target: 
    La comanda restart reavia los servicis donats del snap. Quand es executada dempuèi
    lo punt d'acròcha « configuration », los servicis seràn reaviats a la fin del punt d'acròcha.

en: 
    The revert command reverts the given snap to its state before
    the latest refresh. This will reactivate the previous snap revision,
    and will use the original data that was associated with that revision,
    discarding any data changes that were done by the latest revision. As
    an exception, data which the snap explicitly chooses to share across
    revisions is not touched by the revert process.
target: 
    La comanda « revert » restablís lo paquet Snap donat cap a son estat abans
    la darrièra actualizacion. Aquò reactivarà la precedenta revision del paquet Snap e
    utilizarà las donadas d'origina qu'èran associadas a aquesta revision,
    eliminant tot cambiament dins las donadas que seriá estat efectuat per la darrièra revision.
    En tant qu'excepcion, las donadas que lo paquet Snap causís explicitament de partejar entre
    las revisions son pas tocadas pel processus de restabliment.

en: 
    The set command changes the provided configuration options as requested.
    
        $ snap set snap-name username=frank password=$PASSWORD
    
    All configuration changes are persisted at once, and only after the
    snap's configuration hook returns successfully.
    
    Nested values may be modified via a dotted path:
    
        $ snap set author.name=frank
target: 
    La comanda « set » càmbia las opcions de configuracions provesidas coma demandat.
    
        $ snap set snap-name username=frank password=$SENHAL
    
    Totes los cambiaments de configuracion son conservats en un sol còp, e 
    solament aprèp que lo punt d'acròcha de configuracion del paquet Snap
    siá estat executat corrèctament.
    
    Las valors imbricadas pòdon èsser modificadas via l'indicacion d'un camin 
    separat per de punts :
    
        $ snap set author.name=frank

en: 
    The set command changes the provided configuration options as requested.
    
        $ snapctl set username=frank password=$PASSWORD
    
    All configuration changes are persisted at once, and only after the hook
    returns successfully.
    
    Nested values may be modified via a dotted path:
    
        $ snapctl set author.name=frank
    
    Plug and slot attributes may be set in the respective prepare and connect hooks by
    naming the respective plug or slot:
    
        $ snapctl set :myplug path=/dev/ttyS0
target: 
    La comanda « set » modifica las opcions de configuracion provesidas coma demandat.
    
        $ snapctl set username=frank password=$SENHAL
    
    Totes los cambiaments de configuracion son conservats en un sol còp e 
    solament aprèp que lo punt d'acròcha de configuracion del paquet Snap
    siá estat executat corrèctament.
    
    Las valors imbricadas pòdon èsser modificadas via l'indication d'un camin 
    separat per de punts :
    
        $ snapctl set author.name=frank
    
    Los atributs de las presas e dels connectors pòdon èsser definits dins los punts d'acròcha
    « prepare » e « connect » respectius en indicant lo connector o la presa volgut(-uda) :
    
        $ snapctl set :monconnector path=/dev/ttyS0

en: 
    The start command starts the given services of the snap. If executed from the
    "configure" hook, the services will be started after the hook finishes.
target: 
    La comanda start avia los servicis donats del snap. Quand es executada dempuèi
    lo punt d'acròcha « configuration », los servicis seràn reaviats a la fin del punt d'acròcha.

en: 
    The stop command stops the given services of the snap. If executed from the
    "configure" hook, the services will be stopped after the hook finishes.
target: 
    La comanda stop arrèsta los servicis donats del snap. Quand es executada dempuèi
    lo punt d'acròcha « configuration », los servicis seràn reaviats a la fin del punt d'acròcha.

en: 
    The switch command switches the given snap to a different channel without
    doing a refresh.
target: 
    La comanda switch bascula lo snap donat sus un canal diferent sens
    reactualizar.

en: 
    The tasks command displays a summary of tasks associated to an individual change.
target: 
    La comanda tasks aficha un résumé des tâches associées a un cambiament individuel.

en: 
    The try command installs an unpacked snap into the system for testing purposes.
    The unpacked snap content continues to be used even after installation, so
    non-metadata changes there go live instantly. Metadata changes such as those
    performed in snap.yaml will require reinstallation to go live.
    
    If snap-dir argument is omitted, the try command will attempt to infer it if
    either snapcraft.yaml file and prime directory or meta/snap.yaml file can be
    found relative to current working directory.
target: 
    La comanda « try » installa un paquet Snap non despaquetat al dintre del sistèma dins lo quadre de tèsts.
    Lo contengut d'aqueste contunha d'èsser utilizat quitament aprèp l'installacion, las modificacions non relativas a las metadonadas
    faitas a aqueste nivèl prenon doncas efièit instantanèament. Las modificacions de metadonadas talas coma las que son
    efectuadas dins snap.yaml necessitaràn una reïnstallacion per prene efièit.
    
    Se l'argument « snap-dir » es omés, la comanda « try » ensajarà de lo deduire
    se siá lo fichièr snapcraft.yaml e lo repertòri principal, siá lo fichièr meta/snap.yaml son trobats
    a proximitat del repertòri de trabalh actual.

en: 
    The unalias command tears down a manual alias when given one or disables all aliases of a snap, removing also all manual ones, when given a snap name.
target: 
    La comanda « unalias » enlève l'aliàs manuel donat ou, si lo nom d'un paquet Snap es donat, desactiva Totes los alias del paquet Snap, en supprimant ses alias manuels.

en: 
    The version command displays the versions of the running client, server,
    and operating system.
target: 
    La comanda « version » aficha las versions del client, del servidor e del
    sistèma operatiu en cors d'execucion.

en: 
    The watch command waits for the given change-id to finish and shows progress
    (if available).
target: 
    La comanda « watch » espèra que la comanda « change-id » indicada
    siá acabada e aficha l'estat d'avançament (se disponible).

en: 
    The whoami command prints the email the user is logged in with.
target: 
    La comanda « whoami » aficha l'adreça electronica amb lo qual l'utilizaire
    es connectat.

en: 
    This revision of snap %q was published using classic confinement and thus may
    perform arbitrary system changes outside of the security sandbox that snaps are
    usually confined to, which may put your system at risk.
    
    If you understand and want to proceed repeat the command including --classic.
target: 
    Aquesta version del paquet Snap %q es estada publicada amb un confinament classic.
    Poiriá doncas aportar de modificacions arbitràrias al sistèma, de delà de
    l'espaci memòria protegit (« sandbox ») dins lo qual los paquets Snap son
    generalament confinats, aquò pòt crear una risca per vòstre sistèma.
    
    Se comprenètz aquò e volètz contunhar malgrat tot, repetissètz la comanda 
    en i apondent l'opcion « --classic ».

en: a single snap name is needed to specify mode or channel flags
target: un nom de paquet Snap unic es necessari per especificar los marcadors de mòde o de canal

en: a single snap name is needed to specify the revision
target: un nom de paquet Snap unic es necessari per especificar la revision

en: a single snap name must be specified when ignoring validation
target: lo nom d'un sol paquet Snap deu èsser especificat quand la validacion es ignorada

en: active
target: actiu

en: bought
target: crompat

note: TRANSLATORS: if possible, a single short word
en: broken
target: copat

en: cannot %s without a context
target: %s impossible sens un contèxte

en: cannot buy snap: %v
target: impossible de crompar lo paquet Snap : %v

en: cannot buy snap: invalid characters in name
target: impossible de crompar lo paquet Snap : caractèrs invalids dins lo nom

en: cannot buy snap: it has already been bought
target: impossible de crompar lo paquet Snap : aqueste es ja estat crompat

note: TRANSLATORS: %q is the directory whose creation failed, %v the error message
en: cannot create %q: %v
target: impossible de crear %q : %v

en: cannot create assertions file: %v
target: impossible de crear lo fichièr d'assercions : %v

note: TRANSLATORS: %q gets the snap name, %v gets the resulting error message
en: cannot extract the snap-name from local file %q: %v
target: impossible d'extraire lo nom del paquet Snap a partir del fichièr local %q : %v

en: cannot find app %q in %q
target: impossible de trobar l'aplicacion %q dins %q

en: cannot find hook %q in %q
target: impossible de trobar lo punt d'acròcha %q dins %s

note: TRANSLATORS: %q gets the snap name, %v the list of things found when trying to list it
en: cannot get data for %q: %v
target: impossible d'obténer de donadas per %q : %v

note: TRANSLATORS: %q gets what the user entered, %v gets the resulting error message
en: cannot get full path for %q: %v
target: impossible d'obténer lo camin complet per %q : %v

en: cannot get the current user: %s
target: impossible d'obténer l'utilizaire actual : %s

en: cannot get the current user: %v
target: impossible d'obténer lo nom de l'utilizaire actual : %v

en: cannot mark boot successful: %s
target: impossible de marcar l'aviada coma capitada : %s

en: cannot open the assertions database: %v
target: impossible de dobrir la basa de donadas d'assercions : %v

en: cannot read assertion input: %v
target: impossible de legir l'assercion d'entrada : %v

note: TRANSLATORS: %v the error message
en: cannot read symlink: %v
target: impossible de legir lo ligam simbolic : %v

en: cannot resolve snap app %q: %v
target: impossible de corregir l'aplicacion Snap %q : %v

en: cannot sign assertion: %v
target: impossible de signar l'assercion : %v

en: cannot update the 'current' symlink of %q: %v
target: impossible de metre a jorn lo ligam simbolic actual de %q : %v

note: TRANSLATORS: %q is the key name, %v the error message
en: cannot use %q key: %v
target: impossible d'utilizar la clau %q : %v

en: cannot use change ID and type together
target: impossible de cambiar l'identificant e lo tipe al meteis temps

en: cannot use devmode and jailmode flags together
target: impossible d'utilizar los marcadors devmode e jailmode ensemble

en: cannot validate owner of file %s
target: impossible de validar lo proprietari del fichièr %s

en: cannot write new Xauthority file at %s: %s
target: impossible d'escriure un novèl fichièr Xauthority sus %s : %s

en: change finished in status %q with no error message
target: lo cambiament s'es acabat a l'estatut %q sens message d'error

en: classic confinement requires snaps under /snap or symlink from /snap to %s
target: un confinament classic necessita de snaps jos /snap o un ligam simbolic dempuèi /snap cap a %s

en: created user %q
target: utilizaire %q creat

note: TRANSLATORS: this needs to be a single rune that is understood to mean "days" in e.g. 1d20h
en: d
target: j

note: TRANSLATORS: if possible, a single short word
en: disabled
target: desactivat

en: email:
target: corrièl :

en: enabled
target: activat

en: error: %v
target: error : %v

en: error: the `<snap-dir>` argument was not provided and couldn't be inferred
target: error : l'argument <snap-dir> es pas estat provesit e a pas pogut èsser deduit

en: get which option?
target: obténer quina opcion ?

en: inactive
target: inactiu

en: interface attributes can only be read during the execution of interface hooks
target: los atributs d'interfàcia pòdon pas èsser legits que pendent l'execucion dels punts d'acròcha d'interfàcia

en: interface attributes can only be set during the execution of prepare hooks
target: los atributs d'interfàcia pòdon pas èsser definits que pendent l'execucion dels punts d'acròcha d'interfàcia

en: internal error, please report: running %q failed: %v
target: error intèrna, senhalatz-lo : l'execucion de %q a fracassat : %v

en: internal error: cannot find attrs task
target: error intèrna : impossible de trobar lo prètzfait attrs

en: internal error: cannot find plug or slot data in the appropriate task
target: error intèrna : impossible de trobar las donadas de connector o de presa dins lo prètzfait apropriat

en: internal error: cannot get %s from appropriate task
target: error intèrna : impossible de trobar %s dins lo prètzfait apropriat

en: invalid argument for flag ‘-n’: expected a non-negative integer argument, or “all”.
target: argument invalid pel marcador « -n' » : un argument entièr positiu o « all » es esperat.

en: invalid attribute: %q (want key=value)
target: atribut invalid : %q (clau=valor esperada)

en: invalid configuration: %q (want key=value)
target: configuracion invalida : %q (clau=valor esperada)

en: invalid header filter: %q (want key=value)
target: filtre d'entèsta invalid : %q (clau=valor esperada)

en: invalid parameter: %q (want key=value)
target: paramètre invalid : %q (clau=valor esperada)

en: invalid value: %q (want snap:name or snap)
target: valor invalida : %q (snap:nom o snap esperada)

en: key name %q is not valid; only ASCII letters, digits, and hyphens are allowed
target: lo nom de clau %q es pas valid ; sols los nombres, las letras ASCII e los jonhents son autorizats

note: TRANSLATORS: this needs to be a single rune that is understood to mean "minutes" in e.g. 1m30s
en: m
target: min

en: missing snap-confine: try updating your snapd package
target: Snap-confine manquant : ensajatz de metre a jorn votre paquet Snapd

en: need the application to run as argument
target: besonh que l'aplicacion siá executada coma un argument

en: no changes found
target: cap de cambiament pas trobat

en: no changes of type %q found
target: cap de cambiament pas trobat pel tipe %q

en: no interfaces currently connected
target: cap d'interfàcia pas connectada actualament

en: no interfaces found
target: cap d'interfàcia pas trobada

en: no matching snaps installed
target: cap de paquet Snap correspondent pas installat

en: no such interface
target: pas una tala interfàcia

en: no valid snaps given
target: cap de paquet Snap valid es pas estat indicat

en: please provide change ID or type with --last=<type>
target: provesissètz l'identificant de modificacion o lo tipe amb --last=<type>

note: TRANSLATORS: if possible, a single short word
en: private
target: privat

en: reboot scheduled to update the system - temporarily cancel with 'sudo shutdown -c'
target: redémarrage programmé per metre a jorn lo sistèma - annulation temporaire possible via « sudo shutdown -c »

en: repairs are not available on a classic system
target: las reparacions son pas disponiblas sus un sistèma classic

en: set failed: %v
target: lo parametratge a fracassat : %v

en: set which option?
target: definir quina opcion ?

note: TRANSLATORS: %%q will become a %q for the snap name; %q is whatever foo the user used for --revision=foo
en: snap %%q not found (at least at revision %q)
target: snap %%q non trobat (au moins a la revision %q)

note: TRANSLATORS: %%q will become a %q for the snap name; %q is whatever foo the user used for --channel=foo
en: snap %%q not found (at least in channel %q)
target: snap %%q non trobat (au moins dins lo canal %q)

en: snap %q has no updates available
target: lo snap %q a pas cap de mesa a jorn disponibla

en: snap %q is already installed, see "snap refresh --help"
target: le paquet Snap %q es ja installat, voir « snap refresh --help »

en: snap %q not found
target: snap %q pas trobat

note: TRANSLATORS: free as in gratis
en: snap is free
target: lo paquet Snap es gratuit

en: too many arguments for command
target: tròp d'arguments per la comanda

note: TRANSLATORS: %q is the hook name; %s a space-separated list of extra arguments
en: too many arguments for hook %q: %s
target: tròp d'arguments pel punt d'acròcha %q : %s

note: TRANSLATORS: the %s is the list of extra arguments
en: too many arguments: %s
target: tròp d'arguments : %s

en: unavailable
target: indisponible

en: unknown attribute %q
target: atribut %q desconegut

en: unknown command %q, see "snap --help"
target: commande %q inconnue, voir « snap --help »

en: unknown plug or slot %q
target: presa o connector %q desconegut(-uda)

en: unknown service: %q
target: servici desconegut : %q

note: TRANSLATORS: this needs to be a single rune that is understood to mean "years" in e.g. 1y45d
en: y
target: a

en: Authenticate on snap daemon
target: S'autentificar sul demòni Snap

en: Authorization is required to authenticate on the snap daemon
target: L'autorizacion es requesida per l'autentificacion sul demòni snap

en: Install, update, or remove packages
target: Installar, metre a jorn o suprimir de paquets

en: Authentication is required to install, update, or remove packages
target: L'autentificacion es requesida per installar, metre a jorn o suprimir de paquets

en: Connect, disconnect interfaces
target: Connectar, desconnectar las interfàcias

en: Authentication is required to connect or disconnect interfaces
target: L'autentificacion es requesida per connectar o desconnectar d'interfàcias
